February 2013 - FreeSWITCH-users - FreeSWITCH Mailing Lists

mod_php
by Sayyed Mohammad Emami Razavi 21 Feb '13

21 Feb '13

How to active again mod_php for using in IVR and take it from recent FS versions that it has existed? ... just like mod_lua? LUA is very beautiful but programming in PHP is easier for me!

2 1

Determine if a number is valid/working
by Sean Devoy 21 Feb '13

21 Feb '13

HI All, My web site customer's call center claims that 1/3 of their web leads have nonworking phone numbers. Short of calling it, is there any way with FS (or even a paid service) to determine if a given phone number is a working number? I would like to make an Ajax SOAP call to a PHP page that checks (or dials) the number and returns a status for the validity of the phone number. I have an LUA script that will call, play a short message and hang up, but the customer thinks that may take too long. Any ideas? Thanks, Sean

7 12

DSN for callcenter, what does it do?
by Sayyed Mohammad Emami Razavi 21 Feb '13

21 Feb '13

DSN and SQLite and update mode helps in which needs in call center module?

2 1

Config several FS for routing and reading unique configs
by Sayyed Mohammad Emami Razavi 20 Feb '13

20 Feb '13

How to config several FS systems for 4 FS servers after one LVS(load balancer) so that all agents on all systems defined correctly and route without any problem?! You know that i should have one DB [for e.g. blue.box] and one CONF DIR for my FS XML config files! What is your idea?

2 1

Cudatel
by Moishe Grunstein 20 Feb '13

20 Feb '13

Is these an updated cudatel demo link? https://join.me/411-332-153 not working.

1 0

portaudio on a system with pulseaudio
by Tamer Higazi 20 Feb '13

20 Feb '13

Hi people! I am interisted to make use of portaudio on my system. But my gentoo system along with gnome make use of pulseaudio by default. Is there a way to solve that?! for any advise I thank you all Question:Beyond that, what is mod_alsa ?! would it solve my problems ??? Tamer

2 2

FW: Event pick
by Archana Venugopan 20 Feb '13

20 Feb '13

Hi, I should define a obsession before going to obcause. But my outbound call is already initiated from my dialplan XML [<action application="bridge" data="sofia/external/0${msc_prefix}$1$2(a)10.30.3.27<mailto:2@10.30.3.27>"/>]. Am not sure how to give obsession in lua script as my outbound call is initiated from dialplan XML. Can you please guide me. Many thanks From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: 20 February 2013 17:12 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Event pick What value is in obCause when the originator cancels the call? Print the value in the else block and find out. -MC On Wed, Feb 20, 2013 at 4:37 AM, Archana Venugopan <a.venugopan(a)mundio.com<mailto:a.venugopan@mundio.com>> wrote: Hi, I need to capture this ORIGINATOR _CANCEL event in my lua script. From google I found the below code. But we establish our calls from dialplan XML as like this, <action application="bridge" data="sofia/external/0${msc_prefix}$1$2(a)10.30.3.27<mailto:2@10.30.3.27>"/>. Since am not that well versed in lua script, I am not sure in the place of obsession below what should I pass. As far I understood the =sofia/external/0${msc_prefix}$1$2(a)10.30.3.27<mailto:sofia/external/0$%7bmsc_prefix%7d$1$2@10.30.3.27>, this is what I should put there but we already have this in our XML. Please suggest me on how should I proceed. Many thanks. -- Initiate an outbound call obSession = freeswitch.Session("sofia/192.168.0.4/1002<http://192.168.0.4/1002>") -- Check to see if the call was answered if obSession:ready() then -- Do something good here else -- This means the call was not answered ... Check for the reason local obCause = obSession:hangupCause() freeswitch.consoleLog("info", "obSession:hangupCause() = " .. obCause ) if ( obCause == "USER_BUSY" ) then -- SIP 486 -- For BUSY you may reschedule the call for later elseif ( obCause == "NO_ANSWER" ) then -- Call them back in an hour elseif ( obCause == "ORIGINATOR_CANCEL" ) then -- SIP 487 -- May need to check for network congestion or problems else -- Log these issues end end 2013-02-19 17:56:02.277173 [NOTICE] sofia.c:7082 Hangup sofia/internal/206(a)fsfailover.uk01.com<mailto:206@fsfailover.uk01.com> [CS_EXECUTE] [ORIGINATOR_CANCEL] Regards, Archana _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org

2 1

originate to loopback/answer and park a lua script from another lua script
by Karsten Horsmann 20 Feb '13

20 Feb '13

Hello! as described in Anthonys mail http://lists.freeswitch.org/pipermail/freeswitch-users/2013-January/091769.… i want also to originate my loop.lua to an loopback channel. No problem from fs_cli. I want to originate the loop.lua from my mod_lua start lua script. How can i do this? The freeswitch.Session() didnt work as aspected. -- Kind Regards *Karsten Horsmann*

2 3

Event pick
by Archana Venugopan 20 Feb '13

20 Feb '13

Hi, I need to capture this ORIGINATOR _CANCEL event in my lua script. From google I found the below code. But we establish our calls from dialplan XML as like this, <action application="bridge" data="sofia/external/0${msc_prefix}$1$2(a)10.30.3.27"/>. Since am not that well versed in lua script, I am not sure in the place of obsession below what should I pass. As far I understood the =sofia/external/0${msc_prefix}$1$2(a)10.30.3.27<mailto:sofia/external/0$%7bmsc_prefix%7d$1$2@10.30.3.27>, this is what I should put there but we already have this in our XML. Please suggest me on how should I proceed. Many thanks. -- Initiate an outbound call obSession = freeswitch.Session("sofia/192.168.0.4/1002") -- Check to see if the call was answered if obSession:ready() then -- Do something good here else -- This means the call was not answered ... Check for the reason local obCause = obSession:hangupCause() freeswitch.consoleLog("info", "obSession:hangupCause() = " .. obCause ) if ( obCause == "USER_BUSY" ) then -- SIP 486 -- For BUSY you may reschedule the call for later elseif ( obCause == "NO_ANSWER" ) then -- Call them back in an hour elseif ( obCause == "ORIGINATOR_CANCEL" ) then -- SIP 487 -- May need to check for network congestion or problems else -- Log these issues end end 2013-02-19 17:56:02.277173 [NOTICE] sofia.c:7082 Hangup sofia/internal/206(a)fsfailover.uk01.com [CS_EXECUTE] [ORIGINATOR_CANCEL] Regards, Archana

2 1

FreeSWITCH Weekly Conference Call
by Michael Collins 20 Feb '13

20 Feb '13

Hey folks, today's conference call agenda is here: http://wiki.freeswitch.org/wiki/FS_weekly_2013_02_20 We will be doing a few news updates, including a recap of last night's "FreeSWITCH HA" conference call. Then I will be doing a tour of the CudaTel Communications Server. Talk to you at 1PM EST/10AM PST -- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org

1 0