November 2012 - FreeSWITCH-users - FreeSWITCH Mailing Lists

FreeTDM conf to support NSF
by Nageshwara Rao Moova 21 Nov '12

21 Nov '12

Hi All, We need to modify our freetdm dialer for outbound call when using AT&T 5ESS, which requires prefixing freetdm_isdn.netFac.spec channel variable to freetdm. Is it possible to set "nsf" in freetdm.conf per span. We need this option because we will have assorted spans connected to the board. Does freeTDM support similar conf. shown below of zapata.conf? Is there any configuration file for freeTDM to add this and use it? Some switches (AT&T especially) require network specific facility IE supported values are currently 'none', 'sdn', 'megacom', 'accunet' nsf=none ;Sangoma A102 port 1 [slot:1 bus:3 span: 1] context=from-outside group=1 switchtype => 4ess*nsf=megacom* signalling => pri_cpe pridialplan => unknown channel => 1-23 use_callerid => yes -- regards & thanks -- m nageshwara rao 99891 86280

2 2

Cluecon 2012 and Gemeinshaft 5.0
by Zenny 21 Nov '12

21 Nov '12

Hi: I read at the Cluecon 2012 link below http://www.cluecon.com/presentation/gemeinschaft-50-one-size-fits-all/ that Gemeinshaft 5.0 has already been released, but neither there is any announcment like http://www.freeswitch.org/node/373 nor any pointer in the official site amooma.de? Has anyone clue about this ClueCon event? Or is there any audio or video recording of that specific session of Stefan? If yes, please share. Thanks! /zenny

3 3

How to enable unicode in CLI command?
by 王理 20 Nov '12

20 Nov '12

I tried to use chat / skypopen_chat from CLI console to send a message to receiver, the message is written by unicode charactor (Korean or Thai), the receiver cannot get correct charators; Tried to call chat / skypopen_chat API from LUA/JScript, ended the same; I believe Freeswitch itself support unicode, as when I use an SIP client as "Bria" to send SIP chat message between 2 clients, unicode charactor displays correctly. Is it just the CLI command by design not support unicode, or I have to do something in config xml?

5 5

sip_registrations column orig_server_host being set with internal IP in AWS
by Tim Meade 20 Nov '12

20 Nov '12

We are testing with Amazon AWS and have noticed that orig_server_host in sip_registrations table has the internal IP and not the external one. Is there any way to have this assume the external IP as it's set in vars.conf with external_sip_ip? Thanks Tim

1 0

voicemail flow
by Archana Venugopan 20 Nov '12

20 Nov '12

Hi, While dialing voicemail, mod_voicemail.c file plays the primary role. I know it considers sounds.xml,tts.xml(/usr/local/freeswitch/conf/lang/en/vm) and voicemail.conf.xml (/usr/local/freeswitch/conf/autoload_configs). Once the c file is hit after that what happens and how the flow goes? Can anyone please explain? As am not that good in C, I don't understand the flow. Thanks.

2 1

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 77, Issue 150
by Jason Holden 20 Nov '12

20 Nov '12

It is labeled entros. I saw in the sip signaling that it timed out since did not receive an ack back. Not sure why this is happening though as well as why my external ip is showing up in the sip signaling in my lan. I am sure that is part of the reason why its erroring out due to no tramsion reply. Let me know what you think. Thanks. -----Original Message----- From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of freeswitch-users-request(a)lists.freeswitch.org Sent: Tuesday, November 20, 2012 2:43 PM To: freeswitch-users(a)lists.freeswitch.org Subject: FreeSWITCH-users Digest, Vol 77, Issue 150 Send FreeSWITCH-users mailing list submissions to freeswitch-users(a)lists.freeswitch.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request(a)lists.freeswitch.org You can reach the person managing the list at freeswitch-users-owner(a)lists.freeswitch.org When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-users digest..."

1 0

Re: [Freeswitch-users] Packing for Mageia FINALLY
by Luis Daniel Lucio Quiroz 20 Nov '12

20 Nov '12

Freeswitch is now at mageia 3! :) Please check SPEC and give me advises, I have problems with mod_snmp, for some stragereason it tries to link with libperl LD 2012/11/18 Luis Daniel Lucio Quiroz <luis.daniel.lucio(a)gmail.com>: > Hey, Im gack > > http://pkgsubmit.mageia.org/uploads/failure/cauldron/core/release/201211181… > > It doesnt link, i read about underlink: > https://wiki.mageia.org/en/Underlinking_issues_in_packaging#Perl_modules > > originaly i was having problems with mod_perl but it compiles now > after applying some ld flags, but now mod_snmp doesnt. I dont have > idea why it tries to link to perl. I have already place the > unlinking, > > any advice? > > 2012/3/24 Brian West <brian(a)freeswitch.org>: >> Peas and carrots, peas and carrots? Stay tuned we will have such a >> thing soonish! >> >> Yours Truely, >> Lolly pop >> >> Sent from my eyePad >> >> On Mar 24, 2012, at 10:32 PM, Luis Daniel Lucio Quiroz >> <luis.daniel.lucio(a)gmail.com> wrote: >> >>> Changelog file says it is 1.0.7, but >>> configure.in says 1.1.beta1 >>> >>> also in files.freeswitch.org i found rpms saying 1.1.beta2 dated march 7 >>> >>> So, according your recomendations what release do you recommend me? >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://wiki.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org

1 0

xml_curl requests multiple times per call
by Tim Meade 20 Nov '12

20 Nov '12

Is there any way or method to have multiple xml_curl calls per call? Something like Call comes in xml_curl gets dialplan xml At some point in the dialplan xml something triggers a second call to xml_curl with current dial plan parameters. Hope that makes some kind of sense. Thanks Tim

7 10

Mod nibblebill account sharing
by Meditel 20 Nov '12

20 Nov '12

Hi, I am wondering if Mod nibblebill is able to handle well the case when multiple users are using the same account. This is my setup : Freeswitch + Mod nibblebill + MySQL I have add one account with 1$ cash I have two users sharing the same account. Mod nibblebill configuration is the same for both users : ------------------------------------------------------------------------------------- <variable name="nibble_rate" value="1"/> <variable name="nibble_account" value="555"/> <variable name="nibble_increment" value="60" /> And <param name="nobal_amt" value="0"/> <param name="nobal_action" value="hangup XML default"/> <extension name="hangup"> <condition field="destination_number" expression="^(hangup)$"> <action application="playback" data="no_more_funds.wav"/> <action application="hangup"/> </condition> </extension> ------------------------------------------------------------------------------------- All working well if users are not calling at the same time. But when both users try to call at the same time, they can both make 60sec call (so 60+60 = 120sec) .. they have done 60sec for free :-( Questions: 1. How to avoid the fraud when sharing the same account and knowing that users can call at the same time ? (i don't like a make a heartbeat of 1sec ... it is not good for our database ...) & (I don't like to block the account to be used by only one user at the same time) 2. May be we need to forget mod nibblebill and try using an other solution ? Thanks for sharing your knowledge

1 0

Problems with icall carrier in Texas
by Paul 20 Nov '12

20 Nov '12

We have a number of DID's with icall that we forward to a FS box.We started getting reports from our users that they are getting busy signals starting Sat morning. We have alternate numbers that we handed out to our users through a different carrier. This outage is a serious issue, and I cant seem to get anyone there to discuss it. The main number rings busy. The trouble ticket system cant be accessed as the account login fails. I would like to know if this is isolated to us or system wide. Is anyone else experiencing issues with them or know if they have a status page. I have tried to contact them on their main number and get a busy signal. Thanks in advance -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Problems-with-icall-carrier-i… Sent from the freeswitch-users mailing list archive at Nabble.com.

4 3