July 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

ooH323 vs mod_h323
by Saeed Ahmed 17 Feb '13

17 Feb '13

Dear FSers, which one is better to use when there are higher number of concurrent calls? *ooH323 *or *mod_h323*. Thanks

9 22

Sofia fails to detect offline gateway
by Steven Ayre 03 Jan '13

03 Jan '13

Hi Guys, A couple of our gateways have been shut down for hardware upgrades. However, the FreeSWITCH servers didn't spot the gateways go offline so they're still trying to send calls to them. I see this in the logs: 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP ... you get the idea. I've done some testing and it happens both when FS is running and the gateway goes offline (code 408 then) and when FS starts up with the gateway already offline (code 503 as above). Both IP addresses are entirely offline. I had expected these would go to state DOWN but they haven't, I just get the above repeating. The gateway definitions look like this: <gateway name="gw3"> <param name="realm" value="a.b.c.d"/> <param name="username" value="nouser"/> <param name="password" value="nopass"/> <param name="register" value="false"/> <param name="caller-id-in-from" value="true"/> <param name="ping" value="5"/> <param name="ping-max" value="10"/> <param name="ping-min" value="1"/> <param name="retry-seconds" value="5"/> <param name="expire-seconds" value="60"/> </gateway> Is there a mistake in my configuration? -Steve

6 11

Possible mod_smpp
by Michael Collins 08 Nov '12

08 Nov '12

Hello all, If you are interested in giving monetary support to have a professional software firm create mod_smpp then please contact me off list and I will give you more details. Thanks, Michael

4 5

Mod_limit questions
by ivdreg ivdreg 29 Oct '12

29 Oct '12

Hi All, I have some questions regarding mod_limit. 1. I'm using 16674 in production but tested and with 17001. I try mod_limit with odbc/mysql and sqlite and have same problem: mod_limit using limit_hash never tries to write data to SQL. It works (counts sessions) on log screen but no data in MySQL/Sqlite. It seems that data is cached but cache never flushed to DB. Is anyone has this problem. My limits are: <action application="limit_hash" data="op_${sip_h_X-SRC-Cust} ${destination_number} 5 !INCOMING_CALL_BARRED" /> <action application="limit_hash" data="in_${sip_h_X-SRC-Cust} ${caller_id_number} 10/300 !OUTGOING_CALL_BARRED" /> and they are applied on inbound call profile in same extension. 2. I need to implement rule maximum of 50 calls per day/24h from the same CLID (A NUMBER) after that calls to be limited. I'm not sure but rule in example "Limit calls to 5 calls every 10 minutes" is about concurrent call but not calls processed as count. Any idea ? Thanks for any help

3 8

xmpp
by Peter P GMX 19 Oct '12

19 Oct '12

I saw that xmpp is supported in Fresswitch. See wiki: http://wiki.freeswitch.org/wiki/Mod_xmpp_event Has anybody already set this up? I have found no mod_xmpp neither in my mod directory nor in the source? There was also a question: " Q: Is it possible to send commands to fs via xmpp? Answer: Yes. " Anybody knows what can be done here and how to do this? Best regards Peter

4 3

FreeSWITCH & Heartbeat / Pacemaker - Please Help setting up
by Avi Marcus 26 Sep '12

26 Sep '12

Hi - I'm setting up 2 parallel computers for a HA setup. (low volume so far, no need to load balance.) I already have heartbeat able to grab the public IP if the first box goes down, but since I'm basically completely unfamiar with pacemaker, I'd like some help. I'd imagine I'm not the only one doing this, there should be no reason for me to recreate the wheel. Info should be on: http://wiki.freeswitch.org/wiki/Freeswitch_HA Specifically: 1) It seems freeswitch takes 8 seconds to restart. So if it crashes (unlikely) calls should immediately get shunted over to the other box. How do I set that up? 2) How do I automatically trigger a sofia recover? I know via commanline it's "fs_cli -x "sofia recover" but where do I tell pacemaker to do that? And I suppose a reload_xml before (maybe after?) is a good idea, too. Also, can I put <param name="track-calls" value="true"/> in a global file, or does it need to be in the actual profile files? And anything else I may be overlooking. Thanks guys! -Avi Marcus

8 21

mod_dingaling picking wrong IP address / no audio?
by Mark Campbell-Smith 14 Sep '12

14 Sep '12

Hi! I am trying to call from my corporate network (firewalled) using Gtalk to Freeswitch. I am not getting any audio. In the logs I see that mod_dingaling is using my internal corporate IP address which is not publically addressable. 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2932 1 candidates 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2960 candidates 146.xx.xx.xx:50320 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2993 Acceptable Candidate 146.xx.xx.xx:50320 Further on in the log, I can see GTalk sending a new candidate IP address to use: 2009-06-23 22:46:52.940486 [DEBUG] libdingaling.c:503 New Candidate 1 name=rtp type=local protocol=udp username=e+JTkVHT1xEkqXGD password=fAxU6Pr1oF9Zq48U address=192.168.1.102 port=50322 pref=1.00 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:52.957753 [DEBUG] libdingaling.c:503 New Candidate 2 name=rtp type=stun protocol=udp username=RBqyF2XNMYLfJNoU password=DQMjon1fSVoJIRTp address=124.xxx.xxx.xxx port=50323 pref=0.90 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:53.788341 [DEBUG] libdingaling.c:503 New Candidate 3 name=rtp type=relay protocol=udp username=62L5zs2FHbcUdeCJ password=KxmNgkUmZsLfuX6S address=209.xx.xxx.xxx port=19295 pref=0.50 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] Because of this, I never get audio. Any ideas how to fix this? Thanks!

5 5

mod_dingaling & inbound audio
by Locutis of Borg 14 Sep '12

14 Sep '12

Followed instructions on wiki. Enabled mod_dingaling to register over at GV. Set external rtp to right address. Outbound calling terminates, and outbound audio works, but seems that I can not get return audio. FS is on DMZ - same problem Moved to internal (behind NAT, port forwarding) - same problem Moved back to DMZ and killed iptables and router spi - same problem In and out calling on SIP to provider works fine in both cases. So my questions are: Can mod_dingaling be used for GV or not? Since it uses TLS, NAT shouldn't be an issue? and Does GV not like us FS users? Thank you for you help. "Resistance is Fruitful"

9 14

caller_id_number
by Boris Kovalenko 16 Aug '12

16 Aug '12

Hello! When the call is incoming for my network I want CID is translated by my rules. So I translate caller_id_number and set effective_caller_id_number. But there is a little problem - when the call arrived to a analog phone (for example Panasonic KTX-TCD540) I see two number on display - original caller_id_number and effective_caller_id_number. Is there a way to not show caller_id_number in CID? Or may I modify caller_id_number instead of setting effective_caller_id_number? -- Regards, Boris

9 15

ESL problem
by Thangappan.M 31 Jul '12

31 Jul '12

Dear all, In the previous post, I got the information that using event outbound socket we can implement the IVR and also see the example in libs/esl/perl/server2.pl. I have seen it and understood the flow of the script.But when I was running that script it tells the following error. Can't locate loadable object for module ESL in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at ESL.pm line 11 Compilation failed in require at server2.pl line 1. Then I checked the 11th line in the ESL.pm that line is (bootstrap ESL;) But in perl directory there is no directory called ESL. What would be the issue?. Is ESL necessary is necessary for implementing IVR using event outbound socket? -- Regards, Thangappan.M

5 5