April 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

How to get remote gateway IP
by M.Emran 05 Apr '11

05 Apr '11

Hi, What is the way to read variable for termination gateway ip while it was ringing/answer and stop in lua script? -- Regards ---------- M Emran

3 3

Sane Dialplan Regex
by Max Clark 05 Apr '11

05 Apr '11

Hello, I am trying to clean up the number of invalid calls being sent upstream to PSTN gateways. I've been researching numbering formats and could use some guidance/clarification. Currently I'm matching NADP calls looking by looking for a destination number matching 1 + 10 digits: <condition field="destination_number" expression="^(1\d{10})$"> >From what I've found NPA should be 201-999 and NXX should be 200-999 (ugly regex): <condition field="destination_number" expression="^(1[2-9][0-9]{2}[2-9]\d{2}\d{4})$"> Are there any cases where the NPA & NXX would not conform to this list? Thanks, Max

2 1

video problem in conference with H264
by Seven Du 05 Apr '11

05 Apr '11

I tested with default 3000 conference and it just OK. But I have problem on H264. I tested with one Bria 3.1 on Mac and two XTP8886 hardware phones. http://www.gvscusa.com/xtp8886.html Bria 1003 XTP 1011/1012 call from 1003 to 1011 and from 1011 to 1003 both ok with videos. http://pastebin.freeswitch.org/15910 http://pastebin.freeswitch.org/15911 When 3 phones calling into 3000(conference), Everyone call see Bria(1003), but no one can say 1011 and 1012. Even when I muted 1003. http://pastebin.freeswitch.org/15913 As I said there's no problem with similar test with h263. Can anyone help take a look, thanks. -- About: http://about.me/dujinfang Blog: http://www.dujinfang.com Proj: http://www.freeswitch.org.cn Sent with Sparrow

2 3

callcenter_config commands
by Rajkumar K 05 Apr '11

05 Apr '11

Hi, I found the following useful commands in mod_callcenter module. callcenter_config queue list agents [queue_name] [status] callcenter_config queue list members [queue_name] callcenter_config queue list tiers [queue_name] callcenter_config queue count agents [queue_name] [status] callcenter_config queue count members [queue_name] But when I run the following command, it says simply "+OK" and no members list even though there are calls in queue1. => callcenter_config queue list members queue1 I am using FreeSWITCH Version 1.0.head (git-8f2ee97 2010-12-05 17-19-28 -0600). Should I have to use any latest version? regards rajkumar k

1 0

Recommended SIP IP Wifi Handsets?
by Michael Kennedy 05 Apr '11

05 Apr '11

Hello, Newbie here, and newbie on FS - but been lurking for a few YEARS!... I'm hoping to roll out FS where some areas in a building are wired, and other areas are on WiFi, and to deploy some SIP phones in both areas. I expected that many phone suppliers would have handsets with EITHER RJ45 or WiFi connectivity to the LAN, or even both! I've found only a single device, a Cisco SPA525G2! Furthermore, searching the FS site, and various VoIP sites, and running general searches, I've found no other SIP WiFi phones that look like standard desktop handsets. I'd appreciate any pointers to WiFi devices that are recommended with FS. Preferably "standard-looking" desktop units, and better still, if they had wired "sisters" - in appearance and functionality! Or... maybe best to invest in a few rolls of Cat-6 cable!! Thank you - and many thanks again to some of the regulars here for off-list guidance. - Mike

9 19

how to find available agents in mod callcenter queue
by Rajkumar K 05 Apr '11

05 Apr '11

Hi, Is there any way to find the available agents count for the particular queue in mod callcenter. Note: available agents refers to agents who are all not in call and waiting for it. regards rajkumar k

1 0

My tone_detect doesn't works
by Stephen Wilde 05 Apr '11

05 Apr '11

I'm trying to do a tone_detect in a bridged session but when the tone is detected, the specified action is not performed. My dialplan is: <action application="set" data="execute_on_media=tone_detect mytone 820 wo +30000 set mytone=true 2" /> <action application="bridge" data="${dialstring}" /> In the log I see the following rows: 2011-04-04 18:34:24.604908 [DEBUG] mod_dptools.c:1059 sofia/external/xxx@yyySET [execute_on_media]=[tone_detect mytone 820 wo +30000 set mytone=true 2] EXECUTE sofia/external/xxx@yyy tone_detect(mytone 820 wo +30000 set mytone=true 2) 2011-04-04 18:34:24.647971 [NOTICE] mod_dptools.c:1591 Enabling tone detection 'mytone' '820' 2011-04-04 18:34:28.163751 [DEBUG] switch_ivr_async.c:2475 TONE mytone HIT 1/2 2011-04-04 18:34:28.759034 [DEBUG] switch_ivr_async.c:2475 TONE mytone HIT 2/2 2011-04-04 18:34:28.759034 [DEBUG] switch_ivr_async.c:2481 TONE mytone DETECTED but the "set mytone=true" is never executed. Any suggestion? Stephen

4 16

Transcoding with Manual Redirect
by Lon Baker 05 Apr '11

05 Apr '11

I'm trying to force transcoding from PCMU/A to G722 or fallback. I have it working through a normal bridge dialplan. Another scenario I'm working on is when I receive a call, bridge it to another server which issues a redirect. Using the manual redirect settings and dialplan context, the following is not working. <context name="redirected"> <extension name="redirected"> <condition field="${sip_redirect_dialstring}" expression="^sofia/internal/sip:(.*)$"> <action application="export" data="nolocal:absolute_codec_string=G722,PCMU,PCMA"/> <action application="bridge" data="sofia/external/$1" /> </condition> </extension> </context> It appears to be losing the absolute codec string. Any ideas? -- Lon Baker

3 2

Re: [Freeswitch-users] PRI Test Equipment
by Max Clark 04 Apr '11

04 Apr '11

Thank you - that looks perfect. On Thu, Mar 31, 2011 at 10:48 AM, shouldbe q931 <shouldbeq931(a)gmail.com> wrote: > > > On Thu, Mar 31, 2011 at 4:41 PM, Max Clark <max.clark(a)gmail.com> wrote: >> >> Thanks Jan I'll check this out. >> > > If you want to purchase a dedicated tester, the Trend Aurora is the one that > I used to > use http://www.trendcomms.com/web2/pages.nsf/vlCookie/global$aurora%20sonata?op…

2 1

Vestec Connector
by Roman Gelfand 04 Apr '11

04 Apr '11

Is the vestec connector compatible with freeswitch 1.05? Thanks in advance

2 1