April 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Account ACL
by FERNANDO VILLARROEL 12 Apr '11

12 Apr '11

Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards.

7 17

FreeSWITCH sometimes binds to loopback interface during boot
by Jason White 12 Apr '11

12 Apr '11

I have FreeSWITCH installed under Debian; it is started by the init script during the boot process. External connectivity is provided via an ADSL line, attached to a PCI modem card in the machine. (Specifically, it's a Traverse Technologies Solos card.) Pppd handles the ADSL interface. Now for the problem: sometimes, the external SIP profile binds to 127.0.0.1, presumably because FreeSWITCH is started after the network has been brought up but before the ppp0 interface is established. Restarting the profile with sofia profile external restart does not correct it - I have to restart FreeSWITCH. Is there a better solution - preferably, a means of binding to the correct address without restarting FreeSWITCH? I can create scripts to execute a FreeSWITCH command whenever the PPP interface comes up, but I'd rather avoid a total shutdown/restart in that case.

2 2

No DTMF event generated during a session when calling switch_core_session_send_dtmf()
by Frankie Yiu 11 Apr '11

11 Apr '11

Hi there, I am sending a DTMF key * through switch_core_session_send_dtmf() <in c++ code> during a session while an audio is playing through PlayAndGetDigits() in Mod_managed, but to my surprised I do not receive any DTMF event generated. Is there something else that I need to do? The status returns success. This is the actual code in my C++ switch_dtmf_t dtmf = { '*', switch_core_default_dtmf_duration(0), 0}; switch_status_t dtmfStatus = switch_core_session_send_dtmf(curSession, &dtmf); Please let me know. Thanks, Frankie

1 0

Core Dump after compiling on Debian for Sparc
by A E [Gmail] 11 Apr '11

11 Apr '11

Hi Guys, So I finally got Freeswitch to compile on my Sparc machine running 64-bit debian. As was mentioned earlier, it was compiled with NO CXX flags or other options provided to the configure script. However, when I start freeswitch, it core dumps. All relevant information is available on: http://pastebin.freeswitch.org/16064 <http://pastebin.freeswitch.org/16064>Can someone please look at it and let me know if this is just me or this hints at a bug that no one else ran into. I'm running the latest from Git. Thanks so much

2 3

incoming calls from gateways without auth
by Boris Kovalenko 11 Apr '11

11 Apr '11

Hello! I have a profile where auth-calls param is true. Is there a way to have incoming calls from gateways without auth in this profile? Something like cidr="xxx" for directory entry? Or the only way is to write ACL with gateways' ips and use it with apply-inbound-acl? -- С уважением, Борис Коваленко ЗАО "Тагнет" (3435) 494991

1 0

Clarify about gateways please
by Boris Kovalenko 11 Apr '11

11 Apr '11

Hello! Reading documentation about gateways and misunderstanding. Please clarify: when there is inbound call from a gateway the destination_number is set to: ||   But in this case how may I know what destination_number gateway is calling? -- Regards, Boris

2 1

Mod_fifo outbound strategy enterprise
by Marc de Corny 11 Apr '11

11 Apr '11

Hi all, I am getting the hang of the fifo now and it is proving very stable which is what we all need. Got one question however regarding mod_fifo and the outbound strategies. >From looking at the outbput of the fifo list commands I can see that that parameter is always set to "ringall". which is fine, but I can also see many stats on that number of calls and the last call that the members have taken. Is there also a way of sending the calls to the longest idle or something of that nature? Is that done by setting the outbound_strategy to "enterprise" or is there another way to achieve that. Is there also a command to change that value without editing the XML as I am trying to make everything dynamic. any input is very much appreciated. thanks Marc

3 3

Optimal configuration for compiling on 64-bit platforms
by A E [Gmail] 11 Apr '11

11 Apr '11

Hello, I'm sure this has been talked about several times and searching through the email archives etc. I have seen 64-bit been mentioned many times, but never seen a targetted instructions as to what are the best/optimal parameters to give the configure script to compile on a 64-bit Linux platform. In the wiki, the following is given: CFLAGS=-m64 CXXFLAGS=-m64 LDFLAGS=-m64 ./configure --prefix=/opt/freeswitch --enable-core-odbc-support \ --enable-core-libedit-support --enable-64 --with-openssl=/usr/sfw But it's for compiling in Solaris. Do these flags/settings work on Linux? Can we just use '--enable-64' and that would take care of everything or do we need the extra CFLAGS, CXXFLAGS and LDFLAGS as well? I'm using Debian 64-bit Thanks AEG

4 13

Compiling mod_opal error
by FERNANDO VILLARROEL 11 Apr '11

11 Apr '11

Dear. I am trying of use mod_opal, i am use the the follow how to: http://wiki.freeswitch.org/wiki/FreeSwitch_H323 But when i try of install mod_opal i receive the follow error: cc:/usr/src/freeswitch.trunk# make mod_opal making all mod_opal Compiling /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp... Compiling /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp ... /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp:67: error: invalid conversion from âswitch_call_cause_t (*)(switch_core_session_t*, switch_event_t*, switch_caller_profile_t*, switch_core_session_t**, switch_memory_pool_t**, switch_originate_flag_t)â to âswitch_call_cause_t (*)(switch_core_session_t*, switch_event_t*, switch_caller_profile_t*, switch_core_session_t**, switch_memory_pool_t**, switch_originate_flag_t, switch_call_cause_t*)â make[4]: *** [mod_opal.lo] Error 1 make[3]: *** [all] Error 1 make[2]: *** [mod_opal-all] Error 1 make[1]: *** [mod_opal] Error 2 make: *** [mod_opal] Error 2 I am using FreesWITCH version: FreeSWITCH Version 1.0.trunk (16526) I need support H323 on my FS. Anyone could help me. Regards.

3 4

ESL with PHP not working
by Marc de Corny 10 Apr '11

10 Apr '11

Hi all got an issue with ESL I cannot figure out. I have installed enabled the event socket on the Freeswitch, and it works locally on the server via PHP I have a remote server were I compiled the ESL.so and did the php-install. It is a standard CentOS install with apache. when I type into the command line : php test.php ( the standard test script that is api status ) I get the correct result. when I execute the same script from the browser on the remote server I get an error on the getBody command. *Fatal error*: Call to a member function getBody() on a non-object in * /var/www/html/test.php* on line *9* the only think I can think of as it works from the command line as root but not as apache is rights or ownerships. but I have changed everything to apache without any luck. I'm thinking this must be a common issue. Anybody experienced this ? Thanks Marc

3 4