Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards.
http://wiki.freeswitch.org/wiki/ACL#Users You can set variables directly in the user's directory entry. Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Dear Mathieu. My user are not in ditrectory. My users are gateways authenticated with ACL. How i can use some variable for identifi like accountcode for inbound traffic from this gateways??? Regards --- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca> wrote: From: Mathieu Rene <mrene_lists@avgs.ca> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Friday, April 8, 2011, 4:00 PM http://wiki.freeswitch.org/wiki/ACL#Users You can set variables directly in the user's directory entry. Mathieu ReneAvant-Garde Solutions IncOffice: + 1 (514) 664-1044 x100Cell: +1 (514) 664-1044 x200mrene@avgs.ca On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote: Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this: <extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition> </extension> On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com>wrote:
Dear Mathieu.
My user are not in ditrectory.
My users are gateways authenticated with ACL.
How i can use some variable for identifi like accountcode for inbound traffic from this gateways???
Regards
--- On *Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca>* wrote:
From: Mathieu Rene <mrene_lists@avgs.ca> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Friday, April 8, 2011, 4:00 PM
http://wiki.freeswitch.org/wiki/ACL#Users
You can set variables directly in the user's directory entry. <http://wiki.freeswitch.org/wiki/ACL#Users> Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca <http://mc/compose?to=mrene@avgs.ca>
On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Dear Pablo. Yes i can use condition but accountcode variable is assigned to only outbound gateway, but i need setup accoundcode for inbound gateway too. I not know how i can do this it's. <action application="set" data="accountcode=gateway1"/> Regards. --- On Fri, 4/8/11, Pablo Hernan Saro <pablosaro@gmail.com> wrote: From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Cc: "FERNANDO VILLARROEL" <fvillarroel@yahoo.com> Date: Friday, April 8, 2011, 7:07 PM Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this: <extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition></extension> On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear Mathieu. My user are not in ditrectory. My users are gateways authenticated with ACL. How i can use some variable for identifi like accountcode for inbound traffic from this gateways??? Regards --- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca> wrote: From: Mathieu Rene <mrene_lists@avgs.ca> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Friday, April 8, 2011, 4:00 PM http://wiki.freeswitch.org/wiki/ACL#Users You can set variables directly in the user's directory entry. Mathieu ReneAvant-Garde Solutions IncOffice: + 1 (514) 664-1044 x100Cell: +1 (514) 664-1044 x200mrene@avgs.ca On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote: Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If you use the dial plan example suggested it will set that variable on incoming calls from your gateways. If the gateway IP matched the IP entered it will be executed. /Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för FERNANDO VILLARROEL [fvillarroel@yahoo.com] Skickat: den 10 april 2011 18:10 Till: freeswitch-users@lists.freeswitch.org Ämne: Re: [Freeswitch-users] Account ACL Dear Pablo. Yes i can use condition but accountcode variable is assigned to only outbound gateway, but i need setup accoundcode for inbound gateway too. I not know how i can do this it's. <action application="set" data="accountcode=gateway1"/> Regards. --- On Fri, 4/8/11, Pablo Hernan Saro <pablosaro@gmail.com> wrote: From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Cc: "FERNANDO VILLARROEL" <fvillarroel@yahoo.com> Date: Friday, April 8, 2011, 7:07 PM Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this: <extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition> </extension> On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com</mc/compose?to=fvillarroel@yahoo.com>> wrote: Dear Mathieu. My user are not in ditrectory. My users are gateways authenticated with ACL. How i can use some variable for identifi like accountcode for inbound traffic from this gateways??? Regards --- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to=mrene_lists@avgs.ca>> wrote: From: Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to=mrene_lists@avgs.ca>> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org</mc/compose?to=freeswitch-users@lists.freeswitch.org>> Date: Friday, April 8, 2011, 4:00 PM http://wiki.freeswitch.org/wiki/ACL#Users You can set variables directly in the user's directory entry. <http://wiki.freeswitch.org/wiki/ACL#Users> Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca<http://mc/compose?to=mrene@avgs.ca> On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote: Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org</mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4da1d72c32761895375181!
Hi Fernando, using the dialplan I've suggested you will have the account code set on cdr when one of the conditions match (that is when incoming calls arrive to your FS box from one of the IP addresses in the conditions). I'm not sure if it can be rewritten by outbound gateway definition (is that your problem?). Try that and check your cdr to see which accountcode it's being saved (the one you set at dialplan or the one set in outbound gateway definition). On Sun, Apr 10, 2011 at 1:17 PM, Peter Olsson < peter.olsson@visionutveckling.se> wrote:
If you use the dial plan example suggested it will set that variable on incoming calls from your gateways. If the gateway IP matched the IP entered it will be executed.
/Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [ freeswitch-users-bounces@lists.freeswitch.org] för FERNANDO VILLARROEL [fvillarroel@yahoo.com] Skickat: den 10 april 2011 18:10 Till: freeswitch-users@lists.freeswitch.org Ämne: Re: [Freeswitch-users] Account ACL
Dear Pablo.
Yes i can use condition but accountcode variable is assigned to only outbound gateway, but i need setup accoundcode for inbound gateway too. I not know how i can do this it's.
<action application="set" data="accountcode=gateway1"/>
Regards.
--- On Fri, 4/8/11, Pablo Hernan Saro <pablosaro@gmail.com> wrote:
From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Cc: "FERNANDO VILLARROEL" <fvillarroel@yahoo.com> Date: Friday, April 8, 2011, 7:07 PM
Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this:
<extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition> </extension>
On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com </mc/compose?to=fvillarroel@yahoo.com>> wrote: Dear Mathieu.
My user are not in ditrectory.
My users are gateways authenticated with ACL.
How i can use some variable for identifi like accountcode for inbound traffic from this gateways???
Regards
--- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to= mrene_lists@avgs.ca>> wrote:
From: Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to=mrene_lists@avgs.ca
Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org </mc/compose?to=freeswitch-users@lists.freeswitch.org>> Date: Friday, April 8, 2011, 4:00 PM
http://wiki.freeswitch.org/wiki/ACL#Users
You can set variables directly in the user's directory entry. <http://wiki.freeswitch.org/wiki/ACL#Users> Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca<http://mc/compose?to=mrene@avgs.ca>
On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org< http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org< http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org</mc/compose?to= FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
!DSPAM:4da1d72c32761895375181!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Dear Pablo. Thank you for you help. My problem is setup accountcode for outbound gateway (sip_profiles/external ). I will try and inform to you my tests results. For inbound gateway the acoountcode is setup fine the like this: <action application="set" data="accountcode=foo"/> <action application="bridge" data="sofia/gateway/ms6/$1$2"/> I need setup CDR accountcode for my sip_profiles/external or in this example for gateway named ms6. <include> <gateway name="ms6" cidr="XXX.xx.XXX.170/32"> <param name="username" value="foo"/> <param name="password" value="foo@fool"/> <param name="realm" value="XXX.XX.XXX.170/32"/> <param name="proxy" value="XXX.XX.XXX.170/32"/> <param name="register" value="true"/> <param name="context" value="public"/> </gateway> </include> Regards. Regards --- On Sun, 4/10/11, Pablo Hernan Saro <pablosaro@gmail.com> wrote: From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Sunday, April 10, 2011, 2:45 PM Hi Fernando, using the dialplan I've suggested you will have the account code set on cdr when one of the conditions match (that is when incoming calls arrive to your FS box from one of the IP addresses in the conditions). I'm not sure if it can be rewritten by outbound gateway definition (is that your problem?). Try that and check your cdr to see which accountcode it's being saved (the one you set at dialplan or the one set in outbound gateway definition). On Sun, Apr 10, 2011 at 1:17 PM, Peter Olsson <peter.olsson@visionutveckling.se> wrote: If you use the dial plan example suggested it will set that variable on incoming calls from your gateways. If the gateway IP matched the IP entered it will be executed. /Peter ________________________________________ Från: freeswitch-users-bounces@lists.freeswitch.org [freeswitch-users-bounces@lists.freeswitch.org] för FERNANDO VILLARROEL [fvillarroel@yahoo.com] Skickat: den 10 april 2011 18:10 Till: freeswitch-users@lists.freeswitch.org Ämne: Re: [Freeswitch-users] Account ACL Dear Pablo. Yes i can use condition but accountcode variable is assigned to only outbound gateway, but i need setup accoundcode for inbound gateway too. I not know how i can do this it's. <action application="set" data="accountcode=gateway1"/> Regards. --- On Fri, 4/8/11, Pablo Hernan Saro <pablosaro@gmail.com> wrote: From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Cc: "FERNANDO VILLARROEL" <fvillarroel@yahoo.com> Date: Friday, April 8, 2011, 7:07 PM Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this: <extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition> </extension> On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com</mc/compose?to=fvillarroel@yahoo.com>> wrote: Dear Mathieu. My user are not in ditrectory. My users are gateways authenticated with ACL. How i can use some variable for identifi like accountcode for inbound traffic from this gateways??? Regards --- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to=mrene_lists@avgs.ca>> wrote: From: Mathieu Rene <mrene_lists@avgs.ca</mc/compose?to=mrene_lists@avgs.ca>> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org</mc/compose?to=freeswitch-users@lists.freeswitch.org>> Date: Friday, April 8, 2011, 4:00 PM http://wiki.freeswitch.org/wiki/ACL#Users You can set variables directly in the user's directory entry. <http://wiki.freeswitch.org/wiki/ACL#Users> Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca<http://mc/compose?to=mrene@avgs.ca> On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote: Hi Community. How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode. For aoutbound traffic i use: <action application="set" data="accountcode=foo"/> My problem is for inbound traffic how i can identify accounts? Regards. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org</mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org !DSPAM:4da1d72c32761895375181! _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Sun, Apr 10, 2011 at 3:27 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com>wrote:
Dear Pablo.
Thank you for you help.
My problem is setup accountcode for outbound gateway (sip_profiles/external ). I will try and inform to you my tests results.
For inbound gateway the acoountcode is setup fine the like this:
<action application="set" data="accountcode=foo"/> <action application="bridge" data="sofia/gateway/ms6/$1$2"/>
I need setup CDR accountcode for my sip_profiles/external or in this example for gateway named ms6.
So, you need the variable "accountcode" to be "foo" on the B leg of this call? If so, just use "export" instead of "set" and it will be done <action application="export" data="accountcode=foo"/> If that's not what you want then I recommend that you try explaining from the beginning (again) your problem because we are having a difficult time understanding what you are asking for. Thanks, MC
Dear. Yes i need setup b leg with a accountcode different to a leg, like this a leg = accountcode = foo b leg = accountcode = foo1 I trying with <action application="export" data="accountcode=foo"/> But in my CDR for inbound and outbound call is equal to foo. I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1 Regards. --- On Sun, 4/10/11, Michael Collins <msc@freeswitch.org> wrote: From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Sunday, April 10, 2011, 10:57 PM On Sun, Apr 10, 2011 at 3:27 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear Pablo. Thank you for you help. My problem is setup accountcode for outbound gateway (sip_profiles/external ). I will try and inform to you my tests results. For inbound gateway the acoountcode is setup fine the like this: <action application="set" data="accountcode=foo"/> <action application="bridge" data="sofia/gateway/ms6/$1$2"/> I need setup CDR accountcode for my sip_profiles/external or in this example for gateway named ms6. So, you need the variable "accountcode" to be "foo" on the B leg of this call? If so, just use "export" instead of "set" and it will be done <action application="export" data="accountcode=foo"/> If that's not what you want then I recommend that you try explaining from the beginning (again) your problem because we are having a difficult time understanding what you are asking for. Thanks, MC -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Mon, Apr 11, 2011 at 2:23 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com>wrote:
Dear.
Yes i need setup b leg with a accountcode different to a leg, like this
a leg = accountcode = foo b leg = accountcode = foo1
I trying with
<action application="export" data="accountcode=foo"/>
But in my CDR for inbound and outbound call is equal to foo.
I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1
How do you know that the outbound leg needs to be "foo1"? In other words, where do you look to get the value of "foo1"? -MC
Dear Michael. Thank you for you help. I will try to explain but excuse my bad english. In my FS i received traffic from a gateway A and this traffic i forward to another Gateway B. Gateway A ----> My FS -----> Gateway B. Ok in my CDR i have both calls, inbound and outbound calls. So i need setup inbound call with accountcode = foo and outbound call i need setup with another accountcode variable like accountcode = foo1. So like this i will can inform to my customer (Gateway A) how much traffic i receive from him and i will inform to my provider (Gateway B ) how much traffic i send to him. It's possible or let me know another idea how i can do. Regards. --- On Mon, 4/11/11, Michael Collins <msc@freeswitch.org> wrote: From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Monday, April 11, 2011, 6:31 PM On Mon, Apr 11, 2011 at 2:23 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear. Yes i need setup b leg with a accountcode different to a leg, like this a leg = accountcode = foo b leg = accountcode = foo1 I trying with <action application="export" data="accountcode=foo"/> But in my CDR for inbound and outbound call is equal to foo. I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1 How do you know that the outbound leg needs to be "foo1"? In other words, where do you look to get the value of "foo1"? -MC -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Fernando, What is your native language? We have users who are fluent in Spanish, Brazilian Portugese, and many others. Ask your question in your native language and someone will be able to help those of us who speak only English to understand. That being say, I don't see what you can't set the account code on the B leg. You can do this: <action application="export" data="nolocal:accountcode=foo1"/> However, you still have not told use how you know what value to use. If you literally need to append "1" to the accountcode you can do something like this: <action application="export" data="nolocal:accountcode=${accountcode}1"/> Be sure to use "nolocal:" so that your A leg accountcode value is not affected. Try the above and let us know if that does what you need. -MC On Mon, Apr 11, 2011 at 3:32 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com>wrote:
Dear Michael.
Thank you for you help. I will try to explain but excuse my bad english.
In my FS i received traffic from a gateway A and this traffic i forward to another Gateway B.
Gateway A ----> My FS -----> Gateway B.
Ok in my CDR i have both calls, inbound and outbound calls. So i need setup inbound call with accountcode = foo and outbound call i need setup with another accountcode variable like accountcode = foo1.
So like this i will can inform to my customer (Gateway A) how much traffic i receive from him and i will inform to my provider (Gateway B ) how much traffic i send to him.
It's possible or let me know another idea how i can do.
Regards.
--- On *Mon, 4/11/11, Michael Collins <msc@freeswitch.org>* wrote:
From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Monday, April 11, 2011, 6:31 PM
On Mon, Apr 11, 2011 at 2:23 PM, FERNANDO VILLARROEL < fvillarroel@yahoo.com <http://mc/compose?to=fvillarroel@yahoo.com>> wrote:
Dear.
Yes i need setup b leg with a accountcode different to a leg, like this
a leg = accountcode = foo b leg = accountcode = foo1
I trying with
<action application="export" data="accountcode=foo"/>
But in my CDR for inbound and outbound call is equal to foo.
I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1
How do you know that the outbound leg needs to be "foo1"? In other words, where do you look to get the value of "foo1"? -MC
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Dear Michael. My native language is spanish. Thank you very much for help me. I solved my problem with the script: <action application="export" data="nolocal:accountcode=foo1"/> Thank you. --- On Mon, 4/11/11, Michael Collins <msc@freeswitch.org> wrote: From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Monday, April 11, 2011, 9:20 PM Fernando, What is your native language? We have users who are fluent in Spanish, Brazilian Portugese, and many others. Ask your question in your native language and someone will be able to help those of us who speak only English to understand. That being say, I don't see what you can't set the account code on the B leg. You can do this:<action application="export" data="nolocal:accountcode=foo1"/> However, you still have not told use how you know what value to use. If you literally need to append "1" to the accountcode you can do something like this:<action application="export" data="nolocal:accountcode=${accountcode}1"/> Be sure to use "nolocal:" so that your A leg accountcode value is not affected. Try the above and let us know if that does what you need. -MC On Mon, Apr 11, 2011 at 3:32 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear Michael. Thank you for you help. I will try to explain but excuse my bad english. In my FS i received traffic from a gateway A and this traffic i forward to another Gateway B. Gateway A ----> My FS -----> Gateway B. Ok in my CDR i have both calls, inbound and outbound calls. So i need setup inbound call with accountcode = foo and outbound call i need setup with another accountcode variable like accountcode = foo1. So like this i will can inform to my customer (Gateway A) how much traffic i receive from him and i will inform to my provider (Gateway B ) how much traffic i send to him. It's possible or let me know another idea how i can do. Regards. --- On Mon, 4/11/11, Michael Collins <msc@freeswitch.org> wrote: From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Monday, April 11, 2011, 6:31 PM On Mon, Apr 11, 2011 at 2:23 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote: Dear. Yes i need setup b leg with a accountcode different to a leg, like this a leg = accountcode = foo b leg = accountcode = foo1 I trying with <action application="export" data="accountcode=foo"/> But in my CDR for inbound and outbound call is equal to foo. I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1 How do you know that the outbound leg needs to be "foo1"? In other words, where do you look to get the value of "foo1"? -MC -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Fernando, try the solution proposed by MC. If you still having problems, please drop an email in your native language and someone will be glad to help you (my native language is spanish by the way). On Mon, Apr 11, 2011 at 9:20 PM, Michael Collins <msc@freeswitch.org> wrote:
Fernando,
What is your native language? We have users who are fluent in Spanish, Brazilian Portugese, and many others. Ask your question in your native language and someone will be able to help those of us who speak only English to understand.
That being say, I don't see what you can't set the account code on the B leg. You can do this: <action application="export" data="nolocal:accountcode=foo1"/>
However, you still have not told use how you know what value to use. If you literally need to append "1" to the accountcode you can do something like this: <action application="export" data="nolocal:accountcode=${accountcode}1"/>
Be sure to use "nolocal:" so that your A leg accountcode value is not affected. Try the above and let us know if that does what you need.
-MC
On Mon, Apr 11, 2011 at 3:32 PM, FERNANDO VILLARROEL < fvillarroel@yahoo.com> wrote:
Dear Michael.
Thank you for you help. I will try to explain but excuse my bad english.
In my FS i received traffic from a gateway A and this traffic i forward to another Gateway B.
Gateway A ----> My FS -----> Gateway B.
Ok in my CDR i have both calls, inbound and outbound calls. So i need setup inbound call with accountcode = foo and outbound call i need setup with another accountcode variable like accountcode = foo1.
So like this i will can inform to my customer (Gateway A) how much traffic i receive from him and i will inform to my provider (Gateway B ) how much traffic i send to him.
It's possible or let me know another idea how i can do.
Regards.
--- On *Mon, 4/11/11, Michael Collins <msc@freeswitch.org>* wrote:
From: Michael Collins <msc@freeswitch.org> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Monday, April 11, 2011, 6:31 PM
On Mon, Apr 11, 2011 at 2:23 PM, FERNANDO VILLARROEL < fvillarroel@yahoo.com <http://mc/compose?to=fvillarroel@yahoo.com>>wrote:
Dear.
Yes i need setup b leg with a accountcode different to a leg, like this
a leg = accountcode = foo b leg = accountcode = foo1
I trying with
<action application="export" data="accountcode=foo"/>
But in my CDR for inbound and outbound call is equal to foo.
I need setup inbound call with accountcode = foo and outbound call with accountcode = foo1
How do you know that the outbound leg needs to be "foo1"? In other words, where do you look to get the value of "foo1"? -MC
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello! Why You can't use directory entry like this: <user id="xxx" cidr="yyyy"> <variables> <variable name="accountcode" value="zzz"/> </variable> </user>
Dear Pablo.
Yes i can use condition but accountcode variable is assigned to only outbound gateway, but i need setup accoundcode for inbound gateway too. I not know how i can do this it's.
<action application="set" data="accountcode=gateway1"/>
Regards.
--- On *Fri, 4/8/11, Pablo Hernan Saro /<pablosaro@gmail.com>/* wrote:
From: Pablo Hernan Saro <pablosaro@gmail.com> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Cc: "FERNANDO VILLARROEL" <fvillarroel@yahoo.com> Date: Friday, April 8, 2011, 7:07 PM
Probably it's not the best for you, but the first solution that comes to my mind is setting the accountcode at dialplan. If you are working in a high performance scenario with lot of gateways, then probably you have an objection. Anyway, it would be something like this:
<extensio name="Setting account code for gateways"> <condition field="network_addr" expression="^192\.168\.1\.1$" break="on-true"> <action application="set" data="accountcode=gateway1"/> </condition> <condition field="network_addr" expression="^192\.168\.1\.2$" break="on-true"> <action application="set" data="accountcode=gateway2"/> </condition> </extension>
On Fri, Apr 8, 2011 at 6:05 PM, FERNANDO VILLARROEL <fvillarroel@yahoo.com </mc/compose?to=fvillarroel@yahoo.com>> wrote:
Dear Mathieu.
My user are not in ditrectory.
My users are gateways authenticated with ACL.
How i can use some variable for identifi like accountcode for inbound traffic from this gateways???
Regards
--- On *Fri, 4/8/11, Mathieu Rene /<mrene_lists@avgs.ca </mc/compose?to=mrene_lists@avgs.ca>>/* wrote:
From: Mathieu Rene <mrene_lists@avgs.ca </mc/compose?to=mrene_lists@avgs.ca>> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org </mc/compose?to=freeswitch-users@lists.freeswitch.org>> Date: Friday, April 8, 2011, 4:00 PM
http://wiki.freeswitch.org/wiki/ACL#Users
You can set variables directly in the user's directory entry.
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca <http://mc/compose?to=mrene@avgs.ca>
On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org </mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ? ?????????, ????? ????????? ??? "??????" (3435) 494991
You can set channel variables in the <gateway> section, and you can specify the direction too so that variables get set either on inbound, outbound or both. I *think* the syntax is: <gateway> ... <variables> <variable name="accountcode" value="ABC" direction="inbound"/> ... </variables> </gateway> Steve on iPhone On 8 Apr 2011, at 22:05, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:
Dear Mathieu.
My user are not in ditrectory.
My users are gateways authenticated with ACL.
How i can use some variable for identifi like accountcode for inbound traffic from this gateways???
Regards
--- On Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca> wrote:
From: Mathieu Rene <mrene_lists@avgs.ca> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Friday, April 8, 2011, 4:00 PM
http://wiki.freeswitch.org/wiki/ACL#Users
You can set variables directly in the user's directory entry.
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca
On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Just checked and this is indeed the correct syntax. It's documented on the Wiki: http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files#Gateway Scroll down to the example just above the Settings ( http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files#Settings) header. Does that help? -Steve On 11 April 2011 07:50, Steven Ayre <steveayre@gmail.com> wrote:
You can set channel variables in the <gateway> section, and you can specify the direction too so that variables get set either on inbound, outbound or both.
I *think* the syntax is:
<gateway> ... <variables> <variable name="accountcode" value="ABC" direction="inbound"/> ... </variables> </gateway>
Steve on iPhone
On 8 Apr 2011, at 22:05, FERNANDO VILLARROEL <fvillarroel@yahoo.com> wrote:
Dear Mathieu.
My user are not in ditrectory.
My users are gateways authenticated with ACL.
How i can use some variable for identifi like accountcode for inbound traffic from this gateways???
Regards
--- On *Fri, 4/8/11, Mathieu Rene <mrene_lists@avgs.ca>* wrote:
From: Mathieu Rene <mrene_lists@avgs.ca> Subject: Re: [Freeswitch-users] Account ACL To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Friday, April 8, 2011, 4:00 PM
<http://wiki.freeswitch.org/wiki/ACL#Users> http://wiki.freeswitch.org/wiki/ACL#Users
You can set variables directly in the user's directory entry. <http://wiki.freeswitch.org/wiki/ACL#Users> Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 <http://mc/compose?to=mrene@avgs.ca>mrene@avgs.ca
On 2011-04-08, at 2:57 PM, FERNANDO VILLARROEL wrote:
Hi Community.
How i can identifi inbound traffic authorizated on ACL with some variable like Accountcode.
For aoutbound traffic i use:
<action application="set" data="accountcode=foo"/>
My problem is for inbound traffic how i can identify accounts?
Regards.
_______________________________________________ FreeSWITCH-users mailing list <http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list <http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> FreeSWITCH-users@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:<http://lists.freeswitch.org/mailman/options/freeswitch-users> http://lists.freeswitch.org/mailman/options/freeswitch-users <http://www.freeswitch.org>http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (7)
-
Boris Kovalenko
-
FERNANDO VILLARROEL
-
Mathieu Rene
-
Michael Collins
-
Pablo Hernan Saro
-
Peter Olsson
-
Steven Ayre