February 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

TLS Audiocodes
by Szasz Szabolcs 26 Dec '13

26 Dec '13

Hi, Did anybody set up TLS between Freeswitch and Audiodes MP11X ? I got to work TLS between freeswitch and a softphone (phonerlite), but I have problem with Audiocodes during the TLS authentication. I've loaded the certification but it still doesn't work. Can I debug the tls in freeswitch? Please help me. Thank you in advance. Szasz Szabolcs

3 3

Gateway Registration Issues
by Aloysius Lloyd 15 Dec '13

15 Dec '13

Hi All, I am trying to connect IRISTEL ( CLEC ) in Canada and FreeSWITCH. I have the following gateway configuration <include> <gateway name="wwc_test"> <param name="auth-username" value="username"/> <param name="username" value="14161231234" /> <param name="password" value="password" /> <param name="proxy" value="sbc1.iristel.net" /> <param name="realm" value="iristel.net" /> <param name="expire-seconds" value="120"/> <param name="register" value="true"/> <param name="retry-seconds" value="30"/> <param name="ping" value="25"/> </gateway> </include> The above configuration is not working. I have the following error in cli Error. *2010-05-13 08:34:15.987465 [ERR] sofia_reg.c:1501 14161231234 Registration Failed with status Conflict [409]. failure #1* ==== Also carrier saying there is conflict in the contact field.Here is how they receive now. *Contact: <sip:gw+test_iristel@10.20.30.1:5080 ;transport=udp;gw=test_iristel>.* But the contact field should be like below Contact: <14161231234@10.20.30.1:5080; Any suggestions? Thanks in advance. Lloyd

5 6

Is it necessary to call hangup....
by Moiz Chinoy 07 Nov '13

07 Nov '13

Hello, Is it necessary to call hangup in dialplan after say playing a file through playback application. -- Regards, Moiz Chinoy.

5 4

Cordless phones
by Jonas Gauffin 19 Sep '13

19 Sep '13

Hi, I'm looking for IP-dects where a base station can handle 5 phones (which all should be able to talk at the same time). All suggestions are welcome. Regards, Jonas

10 13

Anyone able to get freeswitch to register a gateway over TLS or TCP? I can't get it to not send UDP packets for reg.
by Mitch Capper 14 Jun '13

14 Jun '13

I am trying to get freeswitch to register with another freeswitch server (on TLS port 5061) however default the config settings I believe should set it, it always trys to register over UDP (after registration or with registration set to false however it does send TCP then for outbound calls). If anyone has a gateway config that actually registers over TCP or TLS that would be great. The client gateway/profile config at: http://pastebin.freeswitch.org/15383is what i believe should work but isn't I have tried setting contact-params on the gateway to tport=tls tport=tcp tport=tcp;transport=tls and transport=tls without any luck. Anyway even TCP would be helpful as it would allow me to trace better how the sip registration decides to use TCP or UDP. I tried digging into libsofia but its a bit hard to trace and understand with its generic event structure and tagging (plus the documentation isn't the most rebust on registration options). Thanks ~Mitch

3 4

Newbie's installation: Can't start FS at boot
by Dyna Guy 23 May '13

23 May '13

I am a newbie to FS and I want learn it. So I setup a Centos 5.2 (fresh install) and followed the instruction on the wiki installed the new Freeswitch v1.0.3. After the installation I can start FS by issus command "/usr/local/freeswitch/bin/freeswitch". After that I copied freeswitch.init.centos5 to /etc/init.d/freeswitch and chmod it to 755. Reboot the server and FS is not running. If I try the start up script: [root@localhost build]# /etc/init.d/freeswitch start Starting freeswitch: [ OK ] [root@localhost build]# /etc/init.d/freeswitch status freeswitch dead but subsys locked Did I miss somthing here? Please help. Thanks a lot. dynaguy Here is the copy of the origenal freeswitch.init.centos5 ---------------------------- [root@localhost ~]# cat /etc/init.d/freeswitch #!/bin/bash # # /etc/rc.d/init.d/freeswitch # # The FreeSwitch Open Source Voice Platform # # chkconfig: 345 89 14 # description: Starts and stops the freeswitch server daemon # processname: freeswitch # config: /usr/local/freeswitch/conf/freeswitch.conf # pidfile: /usr/local/freeswitch/log/freeswitch.pid # # Source function library. . /etc/init.d/functions PROG_NAME=freeswitch PID_FILE=${PID_FILE-/usr/local/freeswitch/log/freeswitch.pid} FS_USER=${FS_USER-freeswitch} FS_FILE=${FS_FILE-/usr/local/freeswitch/bin/freeswitch} FS_HOME=${FS_HOME-/usr/local/freeswitch} LOCK_FILE=/var/lock/subsys/freeswitch FREESWITCH_ARGS="-nc" RETVAL=0 # Source options file if [ -f /etc/sysconfig/freeswitch ]; then . /etc/sysconfig/freeswitch fi # <define any local shell functions used by the code that follows> start() { echo -n "Starting $PROG_NAME: " if [ -e $LOCK_FILE ]; then if [ -e $PID_FILE ] && [ -e /proc/`cat $PID_FILE` ]; then echo echo -n $"$PROG_NAME is already running."; failure $"$PROG_NAME is already running."; echo return 1 fi fi cd $FS_HOME daemon --user $FS_USER --pidfile $PID_FILE "$FS_FILE $FREESWITCH_ARGS $FREESWITCH_PARAMS >/dev/null 2>&1" echo RETVAL=$? [ $RETVAL -eq 0 ] && touch $LOCK_FILE; echo return $RETVAL } stop() { echo -n "Shutting down $PROG_NAME: " if [ ! -e $LOCK_FILE ]; then echo echo -n $"cannot stop $PROG_NAME: $PROG_NAME is not running." failure $"cannot stop $PROG_NAME: $PROG_NAME is not running." echo return 1; fi cd $FS_HOME $FS_FILE -stop > /dev/null 2>&1 killproc $PROG_NAME RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f $LOCK_FILE; return $RETVAL } rhstatus() { status $PROG_NAME; } case "$1" in start) start ;; stop) stop ;; status) status $PROG_NAME RETVAL=$? ;; restart) stop start ;; reload) # <cause the service configuration to be reread, either with # kill -HUP or by restarting the daemons, in a manner similar # to restart above> ;; condrestart) [ -f $PID_FILE ] && restart || : ;; *) echo "Usage: $PROG_NAME {start|stop|status|reload|restart}" exit 1 ;; esac exit $RETVAL

3 2

ooH323 vs mod_h323
by Saeed Ahmed 17 Feb '13

17 Feb '13

Dear FSers, which one is better to use when there are higher number of concurrent calls? *ooH323 *or *mod_h323*. Thanks

9 22

Sofia fails to detect offline gateway
by Steven Ayre 03 Jan '13

03 Jan '13

Hi Guys, A couple of our gateways have been shut down for hardware upgrades. However, the FreeSWITCH servers didn't spot the gateways go offline so they're still trying to send calls to them. I see this in the logs: 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP ... you get the idea. I've done some testing and it happens both when FS is running and the gateway goes offline (code 408 then) and when FS starts up with the gateway already offline (code 503 as above). Both IP addresses are entirely offline. I had expected these would go to state DOWN but they haven't, I just get the above repeating. The gateway definitions look like this: <gateway name="gw3"> <param name="realm" value="a.b.c.d"/> <param name="username" value="nouser"/> <param name="password" value="nopass"/> <param name="register" value="false"/> <param name="caller-id-in-from" value="true"/> <param name="ping" value="5"/> <param name="ping-max" value="10"/> <param name="ping-min" value="1"/> <param name="retry-seconds" value="5"/> <param name="expire-seconds" value="60"/> </gateway> Is there a mistake in my configuration? -Steve

6 11

Possible mod_smpp
by Michael Collins 08 Nov '12

08 Nov '12

Hello all, If you are interested in giving monetary support to have a professional software firm create mod_smpp then please contact me off list and I will give you more details. Thanks, Michael

4 5

Mod_limit questions
by ivdreg ivdreg 29 Oct '12

29 Oct '12

Hi All, I have some questions regarding mod_limit. 1. I'm using 16674 in production but tested and with 17001. I try mod_limit with odbc/mysql and sqlite and have same problem: mod_limit using limit_hash never tries to write data to SQL. It works (counts sessions) on log screen but no data in MySQL/Sqlite. It seems that data is cached but cache never flushed to DB. Is anyone has this problem. My limits are: <action application="limit_hash" data="op_${sip_h_X-SRC-Cust} ${destination_number} 5 !INCOMING_CALL_BARRED" /> <action application="limit_hash" data="in_${sip_h_X-SRC-Cust} ${caller_id_number} 10/300 !OUTGOING_CALL_BARRED" /> and they are applied on inbound call profile in same extension. 2. I need to implement rule maximum of 50 calls per day/24h from the same CLID (A NUMBER) after that calls to be limited. I'm not sure but rule in example "Limit calls to 5 calls every 10 minutes" is about concurrent call but not calls processed as count. Any idea ? Thanks for any help

3 8