January 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

TLS Audiocodes
by Szasz Szabolcs 26 Dec '13

26 Dec '13

Hi, Did anybody set up TLS between Freeswitch and Audiodes MP11X ? I got to work TLS between freeswitch and a softphone (phonerlite), but I have problem with Audiocodes during the TLS authentication. I've loaded the certification but it still doesn't work. Can I debug the tls in freeswitch? Please help me. Thank you in advance. Szasz Szabolcs

3 3

Gateway Registration Issues
by Aloysius Lloyd 15 Dec '13

15 Dec '13

Hi All, I am trying to connect IRISTEL ( CLEC ) in Canada and FreeSWITCH. I have the following gateway configuration <include> <gateway name="wwc_test"> <param name="auth-username" value="username"/> <param name="username" value="14161231234" /> <param name="password" value="password" /> <param name="proxy" value="sbc1.iristel.net" /> <param name="realm" value="iristel.net" /> <param name="expire-seconds" value="120"/> <param name="register" value="true"/> <param name="retry-seconds" value="30"/> <param name="ping" value="25"/> </gateway> </include> The above configuration is not working. I have the following error in cli Error. *2010-05-13 08:34:15.987465 [ERR] sofia_reg.c:1501 14161231234 Registration Failed with status Conflict [409]. failure #1* ==== Also carrier saying there is conflict in the contact field.Here is how they receive now. *Contact: <sip:gw+test_iristel@10.20.30.1:5080 ;transport=udp;gw=test_iristel>.* But the contact field should be like below Contact: <14161231234@10.20.30.1:5080; Any suggestions? Thanks in advance. Lloyd

5 6

Is it necessary to call hangup....
by Moiz Chinoy 07 Nov '13

07 Nov '13

Hello, Is it necessary to call hangup in dialplan after say playing a file through playback application. -- Regards, Moiz Chinoy.

5 4

Newbie's installation: Can't start FS at boot
by Dyna Guy 23 May '13

23 May '13

I am a newbie to FS and I want learn it. So I setup a Centos 5.2 (fresh install) and followed the instruction on the wiki installed the new Freeswitch v1.0.3. After the installation I can start FS by issus command "/usr/local/freeswitch/bin/freeswitch". After that I copied freeswitch.init.centos5 to /etc/init.d/freeswitch and chmod it to 755. Reboot the server and FS is not running. If I try the start up script: [root@localhost build]# /etc/init.d/freeswitch start Starting freeswitch: [ OK ] [root@localhost build]# /etc/init.d/freeswitch status freeswitch dead but subsys locked Did I miss somthing here? Please help. Thanks a lot. dynaguy Here is the copy of the origenal freeswitch.init.centos5 ---------------------------- [root@localhost ~]# cat /etc/init.d/freeswitch #!/bin/bash # # /etc/rc.d/init.d/freeswitch # # The FreeSwitch Open Source Voice Platform # # chkconfig: 345 89 14 # description: Starts and stops the freeswitch server daemon # processname: freeswitch # config: /usr/local/freeswitch/conf/freeswitch.conf # pidfile: /usr/local/freeswitch/log/freeswitch.pid # # Source function library. . /etc/init.d/functions PROG_NAME=freeswitch PID_FILE=${PID_FILE-/usr/local/freeswitch/log/freeswitch.pid} FS_USER=${FS_USER-freeswitch} FS_FILE=${FS_FILE-/usr/local/freeswitch/bin/freeswitch} FS_HOME=${FS_HOME-/usr/local/freeswitch} LOCK_FILE=/var/lock/subsys/freeswitch FREESWITCH_ARGS="-nc" RETVAL=0 # Source options file if [ -f /etc/sysconfig/freeswitch ]; then . /etc/sysconfig/freeswitch fi # <define any local shell functions used by the code that follows> start() { echo -n "Starting $PROG_NAME: " if [ -e $LOCK_FILE ]; then if [ -e $PID_FILE ] && [ -e /proc/`cat $PID_FILE` ]; then echo echo -n $"$PROG_NAME is already running."; failure $"$PROG_NAME is already running."; echo return 1 fi fi cd $FS_HOME daemon --user $FS_USER --pidfile $PID_FILE "$FS_FILE $FREESWITCH_ARGS $FREESWITCH_PARAMS >/dev/null 2>&1" echo RETVAL=$? [ $RETVAL -eq 0 ] && touch $LOCK_FILE; echo return $RETVAL } stop() { echo -n "Shutting down $PROG_NAME: " if [ ! -e $LOCK_FILE ]; then echo echo -n $"cannot stop $PROG_NAME: $PROG_NAME is not running." failure $"cannot stop $PROG_NAME: $PROG_NAME is not running." echo return 1; fi cd $FS_HOME $FS_FILE -stop > /dev/null 2>&1 killproc $PROG_NAME RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f $LOCK_FILE; return $RETVAL } rhstatus() { status $PROG_NAME; } case "$1" in start) start ;; stop) stop ;; status) status $PROG_NAME RETVAL=$? ;; restart) stop start ;; reload) # <cause the service configuration to be reread, either with # kill -HUP or by restarting the daemons, in a manner similar # to restart above> ;; condrestart) [ -f $PID_FILE ] && restart || : ;; *) echo "Usage: $PROG_NAME {start|stop|status|reload|restart}" exit 1 ;; esac exit $RETVAL

3 2

ooH323 vs mod_h323
by Saeed Ahmed 17 Feb '13

17 Feb '13

Dear FSers, which one is better to use when there are higher number of concurrent calls? *ooH323 *or *mod_h323*. Thanks

9 22

Sofia fails to detect offline gateway
by Steven Ayre 03 Jan '13

03 Jan '13

Hi Guys, A couple of our gateways have been shut down for hardware upgrades. However, the FreeSWITCH servers didn't spot the gateways go offline so they're still trying to send calls to them. I see this in the logs: 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:05.396610 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:13.408674 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:21.420884 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:29.458114 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:37.472424 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:46.475934 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw4 with code 503 - count 1/0/10, state UP 2011-01-11 09:35:55.489967 [WARNING] sofia.c:3981 Ping failed gw3 with code 503 - count 1/0/10, state UP ... you get the idea. I've done some testing and it happens both when FS is running and the gateway goes offline (code 408 then) and when FS starts up with the gateway already offline (code 503 as above). Both IP addresses are entirely offline. I had expected these would go to state DOWN but they haven't, I just get the above repeating. The gateway definitions look like this: <gateway name="gw3"> <param name="realm" value="a.b.c.d"/> <param name="username" value="nouser"/> <param name="password" value="nopass"/> <param name="register" value="false"/> <param name="caller-id-in-from" value="true"/> <param name="ping" value="5"/> <param name="ping-max" value="10"/> <param name="ping-min" value="1"/> <param name="retry-seconds" value="5"/> <param name="expire-seconds" value="60"/> </gateway> Is there a mistake in my configuration? -Steve

6 11

Possible mod_smpp
by Michael Collins 08 Nov '12

08 Nov '12

Hello all, If you are interested in giving monetary support to have a professional software firm create mod_smpp then please contact me off list and I will give you more details. Thanks, Michael

4 5

Mod_limit questions
by ivdreg ivdreg 29 Oct '12

29 Oct '12

Hi All, I have some questions regarding mod_limit. 1. I'm using 16674 in production but tested and with 17001. I try mod_limit with odbc/mysql and sqlite and have same problem: mod_limit using limit_hash never tries to write data to SQL. It works (counts sessions) on log screen but no data in MySQL/Sqlite. It seems that data is cached but cache never flushed to DB. Is anyone has this problem. My limits are: <action application="limit_hash" data="op_${sip_h_X-SRC-Cust} ${destination_number} 5 !INCOMING_CALL_BARRED" /> <action application="limit_hash" data="in_${sip_h_X-SRC-Cust} ${caller_id_number} 10/300 !OUTGOING_CALL_BARRED" /> and they are applied on inbound call profile in same extension. 2. I need to implement rule maximum of 50 calls per day/24h from the same CLID (A NUMBER) after that calls to be limited. I'm not sure but rule in example "Limit calls to 5 calls every 10 minutes" is about concurrent call but not calls processed as count. Any idea ? Thanks for any help

3 8

xmpp
by Peter P GMX 19 Oct '12

19 Oct '12

I saw that xmpp is supported in Fresswitch. See wiki: http://wiki.freeswitch.org/wiki/Mod_xmpp_event Has anybody already set this up? I have found no mod_xmpp neither in my mod directory nor in the source? There was also a question: " Q: Is it possible to send commands to fs via xmpp? Answer: Yes. " Anybody knows what can be done here and how to do this? Best regards Peter

4 3

FreeSWITCH & Heartbeat / Pacemaker - Please Help setting up
by Avi Marcus 26 Sep '12

26 Sep '12

Hi - I'm setting up 2 parallel computers for a HA setup. (low volume so far, no need to load balance.) I already have heartbeat able to grab the public IP if the first box goes down, but since I'm basically completely unfamiar with pacemaker, I'd like some help. I'd imagine I'm not the only one doing this, there should be no reason for me to recreate the wheel. Info should be on: http://wiki.freeswitch.org/wiki/Freeswitch_HA Specifically: 1) It seems freeswitch takes 8 seconds to restart. So if it crashes (unlikely) calls should immediately get shunted over to the other box. How do I set that up? 2) How do I automatically trigger a sofia recover? I know via commanline it's "fs_cli -x "sofia recover" but where do I tell pacemaker to do that? And I suppose a reload_xml before (maybe after?) is a good idea, too. Also, can I put <param name="track-calls" value="true"/> in a global file, or does it need to be in the actual profile files? And anything else I may be overlooking. Thanks guys! -Avi Marcus

8 21