June 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

How to enable mod_skypopen without sound card
by k xd 17 Jun '10

17 Jun '10

Hi, I setup freeswitch in a window server and then startup 2 skype clients, however when I call registered skype user, I got this message "Contact can only receive IMs". The server doesn't have sound card. So I guess that when registered skype users try to transfer the incoming call, because of no sound card it terminated the call directly. Does anyone know how to solve this issue? Thanks, Will

2 1

Javascript session.sayphrase()
by David Swardstrom 17 Jun '10

17 Jun '10

I have a need to provide date & time to a caller. The current application allows for interruption via a DTMF key. It would be nice to use session.sayphrase() but the Wiki seems to indicate that this does not allow operation in an interruptable way. Is this correct or do I need to go to lower levels and perhaps change xml files for the "Phrases Section"? so that a play can (optionally) use the dtmf detection and callback arguments? Regards, Paul David Swardstrom

2 1

T38 unsuccessful: result (48) Disconnected after permitted retries
by samuel 17 Jun '10

17 Jun '10

hi all, recently testing T.38 unsuccesfully with freeswitch head version (FreeSWITCH Version 1.0.head (git-) ) on a testing server (2.6.26-2-xen-amd64) remote SDP: v=0 o=root 6039 6040 IN IP4 A.B.C.D s=session c=IN IP4 A.B.C.D t=0 0 m=image 19423 udptl t38 a=T38FaxVersion:0 a=T38MaxBitRate:9600 a=T38FaxFillBitRemoval:0 a=T38FaxTranscodingMMR:0 a=T38FaxTranscodingJBIG:0 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:72 a=T38FaxMaxDatagram:72 a=T38FaxUdpEC:t38UDPRedundancy freeswitch answer: v=0 o=FreeSWITCH 1276579579 1276579581 IN IP4 W.X.Y.Z s=FreeSWITCH c=IN IP4 W.X.Y.Z t=0 0 m=image 22230 udptl t38 a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxFillBitRemoval a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:2000 a=T38FaxMaxDatagram:400 a=T38FaxUdpEC:t38UDPRedundancy a=T38VendorInfo:0 0 0 some debug: 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 T4 expired in phase T30_PHASE_B_RX, state 17 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Too many retries. Giving up. 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.38T Set rx type 0 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.38T Set tx type 4 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Changing from state 17 to 3 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Tx: DCN with final frame tag 2010-06-15 13:37:13.234961 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Tx: ff 13 fa 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Send complete in phase T30_PHASE_D_TX, state 3 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Disconnecting 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Changing from phase T30_PHASE_D_TX to T30_PHASE_E 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.38T Set rx type 0 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.38T Set tx type 1 2010-06-15 13:37:14.406960 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Changing from state 3 to 2 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:271 FLOW T.30 Send complete in phase T30_PHASE_E, state 2 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:301 ============================================================================== 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:313 Fax processing not successful - result (48) Disconnected after permitted retries. 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:318 Remote station id: 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:319 Local station id: SpanDSP Fax Ident 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:320 Pages transferred: 0 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:322 Total fax pages: 0 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:323 Image resolution: 0x0 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:324 Transfer Rate: 14400 2010-06-15 13:37:15.634931 [DEBUG] mod_spandsp_fax.c:326 ECM status off I've starting learning about T3X and freswitch so I would like whether someone can point me to any doc or any configuration parameter that can solve the issue or at least debug it. Thanks in advance, Samuel

5 13

Special Announcement: Be On The Community Conf Call Tomorrow!
by Michael Collins 17 Jun '10

17 Jun '10

Hey everyone! Brian West has an announcement for everyone so be sure to be on the community conference call tomorrow! The details are in the usual spot on the wiki: http://wiki.freeswitch.org/wiki/FS_weekly_2010_06_16 We have updates on the FS project plus a followup presentation by DRK on using mod_managed for CDRs and billing, etc. Talk to you tomorrow! -Michael

4 3

Issue in fifo
by Abubacker siddiq 17 Jun '10

17 Jun '10

Dear all, I am facing problem in fifo while running that using outbound sockets in an async mode, it seems like connecting with the agents but no voice trasmission happens between them , please let me know if some body faced this issue already , and also give me a suggestion whether it is ok to run the fifo using outbound sockets. my main requirement is to play a file with a regular intervals for a waiting customers , Thanks in Advance !

2 4

How to continue call even if recording fails?
by Maciej Aniserowicz 17 Jun '10

17 Jun '10

Hi, I'm recording sessions by sending uuid_record command to FS after calls are bridged. It works fine, but problems start when i'm sending a wrong/nonexistent directory to create the recorded file in. FS shows error (which is expected and fine): [ERR] mod_sndfile.c:195 Error Opening File [c:/FreeSWITCH/reco/rec_c1e3df00-dda2-4320-8900-4853a216f19b.wav] [System error : The system cannot find the path specified.] [ERR] switch_ivr_async.c:997 Error opening c:/FreeSWITCH/reco/rec_c1e3df00-dda2-4320-8900-4853a216f19b.wav After that the recorded call gets hung up. Is there any way to continue the call even if recording fails? -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/How-to-continue-call-even-if-… Sent from the freeswitch-users mailing list archive at Nabble.com.

5 6

Issue in fifo while running it using outbound socket with async
by Abubacker siddiq 17 Jun '10

17 Jun '10

Dear all , -- BEST REGARDS N.ABUBACKER SOFTWARE ENGINEER BK SYSTEMS (P) LTD CHENNAI-23

1 0

what's the cause of ozmod_isdn.c:1839 D-Chan Read Error!
by Tony Tin 17 Jun '10

17 Jun '10

Hi, I've Digium TE220p and 4ess ISDN with openzap native pri stack. I found there are a lot of errors as below in the freeswitch.log. It seems that it doesn't affect the operation of system at the beginning, but finally freeswitch stop answering call. Could anyone help me. Thanks. 1. What's the cause of this error message. 2. How to avoid. 2010-06-16 10:07:04.945026 [ERR] ozmod_isdn.c:1839 D-Chan Read Error! Regards, Tony

3 2

Call disconnect response from FreeSWITCH
by arnuld uttre 16 Jun '10

16 Jun '10

I just started using FS (FreeSWITCH). I am connecting to it through telnet as client and giving it originate command to make calls to some SIP phone. Its placing calls without any problems but FS does not send any info when a call completes so I am little confused on how to know that a call is completed. A typical session is shown down here. FS tells immediately that the call is picked up by the person on other side but no information on when a call is completed. Any idea on how to know that a call is completed so that I can free up my malloc()ed memory. [arnuld@dune ~]$ telnet 192.168.0.222 8021 Trying 192.168.0.222... Connected to cobra (192.168.0.222). Escape character is '^]'. Content-Type: auth/request auth **** Content-Type: command/reply Reply-Text: +OK accepted api originate sofia/internal/105@192.168.0.228:5060 1111 Content-Type: api/response Content-Length: 41 +OK 19d962e3-9fa1-4f26-ba8c-0b9ac6afadc1 exit Content-Type: command/reply Reply-Text: +OK bye Content-Type: text/disconnect-notice Content-Length: 67 Disconnected, goodbye. See you at ClueCon! http://www.cluecon.com/ Connection closed by foreign host. [arnuld@dune ~]$ -- http://uttre.wordpress.com/2008/05/14/the-lost-love-of-mine/

1 0

vars.xml for Spain
by luixsansan＠hotmail.com 16 Jun '10

16 Jun '10

Hello Reading the vars.xml file I found the following defaults  <X-PRE-PROCESS cmd="set" data="call_debug=false"/> <X-PRE-PROCESS cmd="set" data="console_loglevel=info"/> <X-PRE-PROCESS cmd="set" data="default_areacode=918"/> <X-PRE-PROCESS cmd="set" data="default_country=US"/> <X-PRE-PROCESS cmd="set" data="uk-ring=%(400,200,400,450);%(400,2200,400,450)"/> <X-PRE-PROCESS cmd="set" data="us-ring=%(2000,4000,440.0,480.0)"/> <X-PRE-PROCESS cmd="set" data="fr-ring=%(1500,3500,440.0,0.0)"/> <X-PRE-PROCESS cmd="set" data="rs-ring=%(1000,4000,425.0,0.0)"/> <X-PRE-PROCESS cmd="set" data="ru-ring=%(800,3200,425,0)"/> <X-PRE-PROCESS cmd="set" data="bong-ring=v=-7;%(100,0,941.0,1477.0);v=-7;>=2;+=.1;%(1400,0,350,440)"/> <X-PRE-PROCESS cmd="set" data="sit=%(274,0,913.8);%(274,0,1370.6);%(380,0,1776.7)"/> I will assume default_areacode=91 for Madrid although the area code is added to all numbers in Spain and I wonder if it is better to leave this field blank, default_country will be ES but which is the es-ring, bong-ring and sit for Spain? Thank you very much for your help. Luis.

2 2