September 2008 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Default config changes
by Brian West 30 Sep '08

30 Sep '08

FreeSWITCHers, I have been working to make the default configuration multi-domain aware. So please check it out. I have made a few more changes that were recommended by the community and added some documentation into the config and some warnings that shouldn't be ignored! ;) The 9999 extensions no longer plays the bong tone. It plays a file saying "this call has been secured" and it only does so if TLS and SRTP are active. Before it would do it only on SRTP which wasn't really secure in my opinion since you just sent the crypto key in plain text only milliseconds before. Please check it out and let me know if you find any bugs or have input for additions. /b

3 2

IVR Termination
by Jim Flowers 30 Sep '08

30 Sep '08

How do I terminate a menu with an unconditional transfer to an extension (please stay on the line to talk with the receptionist)? Also, how do I terminate a menu by just dropping the call if no digits are pushed? The samples I copy just keep repeating the menu. Thanks -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 9

Re: [Freeswitch-users] Load test - performance not even matching Asterisk
by Jon Bruel 29 Sep '08

29 Sep '08

Thanks for the input. I have now upgraded the OS to i86_64 (FC9), and I configured without libcurl, as recommended by Anthony. The FS loaded without problems apart from some "database is locked" errors, which may be harmless? I ran the ulimit as recommended to unlimit all resources. I started the FS after the ulimit. The same performance test showed a slightly better result. Without trying to make this too scientific, the improvement by going from 32 bit OS to 64 bit OS has been 10-20%, at the most. Still the performance is around 30-40% of the performance of Asterisk. With 100 a-leg (no b-leg, as all calls are answered by the echo application) permanent channels the CPU idle is 10%, with 60% system-load and 30% CPU-load. So something is rotten in Denmark... /Jon

3 2

Connecting Freeswitch to SMS centre
by Imthiyaz Ahmed 29 Sep '08

29 Sep '08

Is there a possiblity we can connect freeswitch SMSC ? -- Best Regards G.Imthiyaz Ahmed

1 0

FreeSWITCH Version 1.0.trunk (9609) profile_name field
by Jim Flowers 29 Sep '08

29 Sep '08

My FreeSWITCH Version 1.0.trunk (9609) with samples loaded continually throws an error when answering a call. There is no `profile_name` column in any table in core.db. Log entries follow. freeswitch.log -------------- 2008-09-29 10:26:26 [DEBUG] mod_dialplan_xml.c:119 parse_exten() Regex mismatch 2008-09-29 10:26:26 [DEBUG] mod_dialplan_xml.c:117 parse_exten() Regex: [del-group] destination_number(5000) =~ /^80(\d{2})$/ 2008-09-29 10:26:26 [DEBUG] mod_dialplan_xml.c:119 parse_exten() Regex mismatch 2008-09-29 10:26:26 [ERR] switch_core_sqldb.c:131 switch_core_db_persistant_execute() SQL ERR [table sip_dialogs has no column named profile_name] 2008-09-29 10:26:26 [DEBUG] mod_dialplan_xml.c:117 parse_exten() Regex: [add-group] destination_number(5000) =~ /^81(\d{2})$/ -- Jim Flowers <jflowers(a)ezo.net> -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

Re: [Freeswitch-users] Load test - performance not even matching Asterisk
by Jon Bruel 29 Sep '08

29 Sep '08

The load on the CPU was after the calls were set up, this indicated that's not a disk access issue. I'm running FC 8, i686, which I understand is 32 bit. Changing to FC 8 or 9 x86_64 is possible on the Intel(r) Core(tm)2 Duo Processor, and if it's worth it; I'll do it. Does anyone have an idea of what the performance boost will be? /Jon

5 4

storing csv file in mysql database
by preetha Ayyappan 29 Sep '08

29 Sep '08

hi, I am getting the call records saved in the folder cdr-csv.I need to save this cdr details in mysql database.Is it possible to do?If yes please assist me to do this. Thanks

5 9

Re: [Freeswitch-users] Load test - performance not even matching Asterisk
by Jon Bruel 29 Sep '08

29 Sep '08

Regarding the 32bit vs. 64bit questions, I'm a bit uncertain about how I answer it, but here is some imformation, which you may use: cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm uname -ar gives: Linux econel2.everdance.com 2.6.25.9-40.fc8 #1 SMP Fri Jun 27 16:25:53 EDT 2008 i686 i686 i386 GNU/Linux. With respect to compiling the FS, I have not been aware of any options, so I just did the standard: bootstrap.sh, configure, make and make install. I have tried to configure with some 64bit flags: CFLAGS="-m64 -fast" CXXFLAGS="-m64 -fast" LDFLAGS="-m64" ./configure --prefix=/opt/freeswitch --enable-core-odbc-support --enable-core-libedit-support --enable-64 --with-openssl=/usr/sfw, but I get an error: checking for C compiler default output file name... configure: error: C compiler cannot create executables so I may need to install some 64bit libraries? If so some hints would be great! /Jon

3 2

get channel status
by Gopal krishnan 29 Sep '08

29 Sep '08

Hi, Is there any possibilities that I can check my channel status whether it is ringing or answer or hangup. I am trying to fetch thru uuid but couldn't able to do that. any suggestion would be helpful. thanks -- Thank you with regards, Gopal,

1 0

Re: [Freeswitch-users] Error loading ODBC
by B Karthik 29 Sep '08

29 Sep '08

This link should help you through that. It did for me :) http://www.debian-administration.org/articles/496 B Karthik On Mon, Sep 29, 2008 at 2:03 PM, < freeswitch-users-request(a)lists.freeswitch.org> wrote: > Send Freeswitch-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeswitch-users digest..." > > Today's Topics: > > 1. Re: Load test - performance not even matching Asterisk (Ken Rice) > 2. Re: Error loading ODBC (Ken Rice) > > > ---------- Forwarded message ---------- > From: Ken Rice <krice(a)suspicious.org> > To: <freeswitch-users(a)lists.freeswitch.org> > Date: Mon, 29 Sep 2008 02:40:10 -0500 > Subject: Re: [Freeswitch-users] Load test - performance not even matching > Asterisk > What he means by 64bit is are you using a 64bit of fedora? If not grab > the centos5 64bit iso and try that... > Also, several things upto and including hard disk access times can greatly > affect the number of calls/sec and other things... > > And yes freeswitch can greatly outperform asterisk by an order of > magnitude... We routinely route 2000 concurrent calls > > > ------------------------------ > *From: *Jon Bruel <jbr(a)consiglia.dk> > *Reply-To: *<freeswitch-users(a)lists.freeswitch.org> > *Date: *Mon, 29 Sep 2008 09:31:54 +0200 > *To: *<freeswitch-users(a)lists.freeswitch.org> > *Subject: *Re: [Freeswitch-users] Load test - performance not even > matching Asterisk > > Regarding the 32bit vs. 64bit questions, I'm a bit uncertain about how I > answer it, but here is some imformation, which you may use: > cpu family : 6 > model : 15 > model name : Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz > flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc > arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm > uname –ar gives: Linux econel2.everdance.com 2.6.25.9-40.fc8 #1 SMP Fri > Jun 27 16:25:53 EDT 2008 i686 i686 i386 GNU/Linux. > > With respect to compiling the FS, I have not been aware of any options, so > I just did the standard: bootstrap.sh, configure, make and make install. > I have tried to configure with some 64bit flags: CFLAGS="-m64 -fast" > CXXFLAGS="-m64 -fast" LDFLAGS="-m64" ./configure --prefix=/opt/freeswitch > --enable-core-odbc-support --enable-core-libedit-support --enable-64 > --with-openssl=/usr/sfw, but I get an error: > > checking for C compiler default output file name... > configure: error: C compiler cannot create executables > > so I may need to install some 64bit libraries? If so some hints would be > great! /Jon > > ------------------------------ > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > ---------- Forwarded message ---------- > From: Ken Rice <krice(a)suspicious.org> > To: <freeswitch-users(a)lists.freeswitch.org> > Date: Mon, 29 Sep 2008 03:32:55 -0500 > Subject: Re: [Freeswitch-users] Error loading ODBC > Refer to one of the many unixODBC howtos like the one found here > http://developer.mimer.com/howto/howto_57.htm > Or visit the unixODBC website @ www.unixodbc.org .... > > > ------------------------------ > *From: *preetha Ayyappan <preetha.ayyappan(a)gmail.com> > *Reply-To: *<freeswitch-users(a)lists.freeswitch.org> > *Date: *Mon, 29 Sep 2008 13:06:51 +0530 > *To: *<freeswitch-users(a)lists.freeswitch.org> > *Subject: *Re: [Freeswitch-users] Error loading ODBC > > Where should i configure the data source name in odbc? > > On Mon, Sep 29, 2008 at 1:05 PM, preetha Ayyappan < > preetha.ayyappan(a)gmail.com> wrote: > > Yes. I have uncommented that line before installing itself.Even though i am > getting the same error. > > > On Mon, Sep 29, 2008 at 1:00 PM, Ken Rice <krice(a)suspicious.org> wrote: > > In modules.conf in the root of the freeswitch source directory did you > uncomment languages/mod_spidermonkey_odbc if you didn't its not building the > module > > > ------------------------------ > *From: *preetha Ayyappan <preetha.ayyappan(a)gmail.com> > *Reply-To: *<freeswitch-users(a)lists.freeswitch.org> > *Date: *Mon, 29 Sep 2008 12:44:40 +0530 > *To: *<freeswitch-users(a)lists.freeswitch.org> > *Subject: *Re: [Freeswitch-users] Error loading ODBC > > > Thanks.I have uncommented the line yoy specified and run the program > sample.js from the freeswitch console.It shows the following error: > freeswitch@localhost> 2008-09-29 18:13:03 [ERR] switch_odbc.c:160 > switch_odbc_handle_connect() STATE: IM002 CODE 0 ERROR: [unixODBC][Driver > Manager]Data source name not found, and no default driver specified > > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [NOTICE] sample.js:1 console_log() > ============================== > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:266 odbc_num_rows() > Database is not connected! > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:314 odbc_next_row() > Database is not connected! > 2008-09-29 18:13:03 [NOTICE] sample.js:1 console_log() > ============================== > 2008-09-29 18:13:03 [ERR] mod_spidermonkey_odbc.c:235 odbc_exec() Database > is not connected! > > Thanks > > > On Mon, Sep 29, 2008 at 12:29 PM, Michael Jerris <mike(a)jerris.com> wrote: > > > On Sep 29, 2008, at 2:45 AM, preetha Ayyappan wrote: > > I have uncommented the line *'langages/mod_spidermonkey_odbc' *from > /usr/local/freeswitch/modules.conf and installed like the following > > step1:-I have downloaded the unixodbc and put it in usr/local/freeswitch. > step2:-I have installed like the following from the /usr/local/freeswitch > a)tar -xvzf unixODBC-2.2.12.tar.gz > step3:-In the path /usr/local/freeswitch/unixodbc-2.2.12 ,i have done > b)./configure --enable-gui=no > c)make > d)make install > > step3:-In the path /usr/local/freeswitch,I have done > a)./configure --enable-core-odbc-support > b)make all install > > when doing the above steps > > a)./configure --enable-core-odbc-support > b)make all install, I am getting the lines > > Making install in src > Making install in mod > > is not a valid FreeSWITCH module dir, skipping it..... > > is not a valid FreeSWITCH module dir, skipping it..... > > > > After making all the above I have put a sample odbc.js in > /usr/local/javascript/scripts and tried to run from the freeswitch console > like jsrun odbc.js. > > I am getting the following error: > > freeswitch@localhost> 2008-09-29 17:44:12 [ERR] mod_spidermonkey.c:3303 > js_api_use() Error loading ODBC > > > 2008-09-29 17:44:12 [ERR] sample.js:11 mod_spidermonkey() ReferenceError: > ODBC is not defined > > please let me know where i am wrong here. > > Thanks. > > > in the file conf/autoload_configs/spidermonkey.conf.xml > > uncomment <load module="mod_spidermonkey_odbc"/> > > I know you said you did before but double check... are you still getting > the error that it can not open mod_spidermonkey_odbc.so? When it builds, do > you see it building mod_spidermonkey_odbc? Does it actually create the so? > > Mike > > > > > > > On Fri, Sep 26, 2008 at 3:16 PM, David Knell <dave(a)3c.co.uk> wrote: > > > Hi Preetha, > > You've probably not compiled the module. Have a look in > /usr/src/freeswitch (or wherever your source is); you'll > find a modules.conf there. Uncomment the line > 'langages/mod_spidermonkey_odbc', rebuild, reinstall and things > might get better. > > --Dave > > > > yes, I did ./configure --enable-core-odbc-support && make && make > install.When i gave make install during installation,i found the following > error: > > > > 2008-09-26 19:37:19 [CRIT] switch_loadable_module.c:767 > switch_loadable_module_load_file() Error Loading module > /usr/local/freeswitch/mod/mod_spidermonkey_odbc.so > **/usr/local/freeswitch/mod/mod_spidermonkey_odbc.so: cannot open shared > object file: No such file or directory** > > Thanks > > > On 9/25/08, *Raymond Chandler* <intralanman(a)freeswitch.org> wrote: > > > if you built from source, make sure you use the --enable-core-odbc-support > option on your ./configure > > like so > ./configure --enable-core-odbc-support && make && make install > > -Ray > > > preetha Ayyappan wrote: > > > You mean i have to uncomment the line <load > module="mod_spidermonkey_odbc"/>.? > yes.I have uncommented that line.eventhough the same error occurs > > > On Thu, Sep 25, 2008 at 2:33 PM, Michael Jerris <mike(a)jerris.com> wrote: > > > > On Sep 25, 2008, at 4:47 AM, preetha wrote: > > > > > Hi, > > when i try to run a sample odbc code from freeswitch console like > > freeswitch@localhost> jsrun odbc.js > > > > I found the following error: > > API CALL [jsrun(odbc.js)] output: > > OK > > > > freeswitch@localhost> 2008-09-25 19:44:35 [ERR] mod_spidermonkey.c: > > 3303 > > js_api_use() Error loading ODBC > > 2008-09-25 19:44:35 [ERR] odbc.js:11 mod_spidermonkey() > > ReferenceError: > > ODBC is not defined > > > > > Make sure you have mod_spidermonkey_odbc loaded in your > spidermonkey.conf.xml file > > Mike > > > > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > -- > Preetha.A > > ------------------------------ > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > -- > Preetha.A > > > > -- > Preetha.A > > ------------------------------ > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

1 0