Hi,
Wishing U all a very Happy n Prosperous New Year!!!!
I am trying to make an outgoing call using FXO connected to an external
telephone line.
Here is the set-up:
1. FXO connected to external telephone line
2. FXS connected to analog phone.
The Openzap.conf @ /etc/openzap is as follows:
[span zt]
name => OpenZAP
number => 1
fxs-channel => 1
[span zt]
name => OpenZAP
number => 1
fxo-channel => 4
The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for
inward and outgoing calls on FXO as follows:
<extension name="outgoing-fxo">
<condition field="destination_number" expression="^(43)$">
<action application="bridge" data="openzap/2/1/43"/>
</condition>
</extension>
<extension name="incoming-fxo">
<condition field="destination_number" expression="^(35)$">
<action application="bridge" data="openzap/1/1"/>
</condition>
</extension>
While Start-up Freeswitch following logs were seen:
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for
span
2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of
type zt
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1
[name]=[OpenZAP]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1
[fxs-channel]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type
to 'FXS' start(KEWL)
2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device
/dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for
span
2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of
type zt
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2
[name]=[OpenZAP]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2
[fxo-channel]=[4]
2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type
to 'FXO' start(KEWL)
2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device
/dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32
2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2
channel(s)
2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748
switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
and while I made a call following logs were seen:
2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134
switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02
12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms
2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name()
New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa]
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel()
OPENZAP/43 State Change CS_NEW -> CS_INIT
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625
switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK]
2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call()
outgoing_call method not implemented!
2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel()
Close Channel OPENZAP/43 [CS_INIT]
2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate()
Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873
switch_ivr_originate() Originate Resulted in Error Cause: 27
[DESTINATION_OUT_OF_ORDER]
2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function()
Originate Failed. Cause: DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function()
Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER]
2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071
switch_channel_perform_hangup() Kill OpenZAP/43 [KILL]
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625
switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK]
2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394
switch_core_session_run() (OpenZAP/43) State HANGUP
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing
state on 1:1 from IDLE to HANGUP
2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43
CHANNEL HANGUP
2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45
switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause:
DESTINATION_OUT_OF_ORDER
2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683
switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on
external entities
2008-01-02 12:04:16 [INFO] switch_core_session.c:689
switch_core_session_thread() Session 1 (OpenZAP/43) Ended
2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691
switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP]
2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run()
Executing state handler on 1:1 for HANGUP
2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run()
Changing state on 1:1 from HANGUP to BUSY
2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run()
Executing state handler on 1:1 for BUSY
2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT
[ONHOOK][1:1] STATE [BUSY]
2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state
on 1:1 from BUSY to DOWN
2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run()
Executing state handler on 1:1 for DOWN
2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig
[STOP]
2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG
CHANNEL thread ended.
Could anyone help me out in getting FXO working ???
Thanks in advance...
BR,
Irshad.