- FreeSWITCH-users - FreeSWITCH Mailing Lists

Baremetal, hyperthreading?
by David Villasmil 11 Jun '20

11 Jun '20

Hello all, We’re having a discussion regarding whether it is better to have hyperthreading enabled or disabled. What’s you take on this? Thanks -- Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 3

-32000 authentication required after upgrading to v1.10.2 from 1.8
by David P 10 Jun '20

10 Jun '20

We've tried upgrading FS v1.8 to 1.10.2 on Debian 9. This is a big change because FS folders are no longer under /etc/freeswitch/ but we think we've adjusted all our config to be compatible. Still, attempted calls immediately fail and the log shows only "-32000 authentication required" with log level at max. FWIW, 1) We were using apache2 to reverse-proxy '/wss2' to :8082 but that led to: jquery.jsonrpcclient.js:323 WebSocket connection to 'wss://example.com/wss2' failed: Error in connection establishment: net::ERR_SSL_PROTOCOL_ERROR so we changed our verto page to go straight to :8082, but that didn't fix it. 2) Our config folder structure is: prefix: /usr/local/freeswitch exec_prefix: /usr/local/freeswitch bindir: ${exec_prefix}/bin confdir: /usr/local/freeswitch/conf libdir: ${exec_prefix}/lib datadir: /usr/local/freeswitch localstatedir: /usr/local/freeswitch includedir: /usr/local/freeswitch/include/freeswitch certsdir: /usr/local/freeswitch/certs dbdir: /usr/local/freeswitch/db grammardir: /usr/local/freeswitch/grammar htdocsdir: /usr/local/freeswitch/htdocs fontsdir: /usr/local/freeswitch/fonts logfiledir: /usr/local/freeswitch/log modulesdir: /usr/local/freeswitch/mod pkgconfigdir: ${exec_prefix}/lib/pkgconfig recordingsdir: /usr/local/freeswitch/recordings imagesdir: /usr/local/freeswitch/images runtimedir: /usr/local/freeswitch/run scriptdir: /usr/local/freeswitch/scripts soundsdir: /usr/local/freeswitch/sounds storagedir: /usr/local/freeswitch/storage cachedir: /usr/local/freeswitch/cache Can I provide any other detail to get help with this upgrade?

2 2

-32000 authentication required after upgrading to v1.10.2 from 1.8
by kaleem rehman 10 Jun '20

10 Jun '20

Hi David, your problem is very likely to be ACLs, please view https://freeswitch.org/confluence/pages/viewpage.action?pageId=3965687 you need to setup acls. regards, Kaleem On Wed, Jun 10, 2020 at 1:28 PM < freeswitch-users-request(a)lists.freeswitch.org> wrote: > Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FreeSWITCH-users digest..." > Today's Topics: > > 1. -32000 authentication required after upgrading to v1.10.2 > from 1.8 (David P) > 2. Re: -32000 authentication required after upgrading to v1.10.2 > from 1.8 (David P) > > > > ---------- Forwarded message ---------- > From: David P <davidswalkabout(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Cc: > Bcc: > Date: Tue, 9 Jun 2020 11:33:28 -0700 > Subject: [Freeswitch-users] -32000 authentication required after upgrading > to v1.10.2 from 1.8 > We've tried upgrading FS v1.8 to 1.10.2 on Debian 9. This is a big change > because FS folders are no longer under /etc/freeswitch/ but we think we've > adjusted all our config to be compatible. > > Still, attempted calls immediately fail and the log shows only "-32000 > authentication required" with log level at max. > > FWIW, > 1) We were using apache2 to reverse-proxy '/wss2' to :8082 but that led > to: > jquery.jsonrpcclient.js:323 WebSocket connection to 'wss:// > example.com/wss2' failed: Error in connection establishment: > net::ERR_SSL_PROTOCOL_ERROR > so we changed our verto page to go straight to :8082, but that didn't fix > it. > > 2) Our config folder structure is: > prefix: /usr/local/freeswitch exec_prefix: /usr/local/freeswitch bindir: > ${exec_prefix}/bin confdir: /usr/local/freeswitch/conf libdir: > ${exec_prefix}/lib datadir: /usr/local/freeswitch localstatedir: > /usr/local/freeswitch includedir: /usr/local/freeswitch/include/freeswitch > certsdir: /usr/local/freeswitch/certs dbdir: /usr/local/freeswitch/db > grammardir: /usr/local/freeswitch/grammar htdocsdir: > /usr/local/freeswitch/htdocs fontsdir: /usr/local/freeswitch/fonts > logfiledir: /usr/local/freeswitch/log modulesdir: /usr/local/freeswitch/mod > pkgconfigdir: ${exec_prefix}/lib/pkgconfig recordingsdir: > /usr/local/freeswitch/recordings imagesdir: /usr/local/freeswitch/images > runtimedir: /usr/local/freeswitch/run scriptdir: > /usr/local/freeswitch/scripts soundsdir: /usr/local/freeswitch/sounds > storagedir: /usr/local/freeswitch/storage cachedir: > /usr/local/freeswitch/cache > > Can I provide any other detail to get help with this upgrade? > > > > ---------- Forwarded message ---------- > From: David P <davidswalkabout(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Cc: > Bcc: > Date: Tue, 9 Jun 2020 11:34:38 -0700 > Subject: Re: [Freeswitch-users] -32000 authentication required after > upgrading to v1.10.2 from 1.8 > We've also made sure that our certs are constructed in the same way that > we've done for v1.8 > > On Tue, Jun 9, 2020 at 11:33 AM David P <davidswalkabout(a)gmail.com> wrote: > >> We've tried upgrading FS v1.8 to 1.10.2 on Debian 9. This is a big change >> because FS folders are no longer under /etc/freeswitch/ but we think we've >> adjusted all our config to be compatible. >> >> Still, attempted calls immediately fail and the log shows only "-32000 >> authentication required" with log level at max. >> >> FWIW, >> 1) We were using apache2 to reverse-proxy '/wss2' to :8082 but that led >> to: >> jquery.jsonrpcclient.js:323 WebSocket connection to 'wss:// >> example.com/wss2' failed: Error in connection establishment: >> net::ERR_SSL_PROTOCOL_ERROR >> so we changed our verto page to go straight to :8082, but that didn't fix >> it. >> >> 2) Our config folder structure is: >> prefix: /usr/local/freeswitch exec_prefix: /usr/local/freeswitch bindir: >> ${exec_prefix}/bin confdir: /usr/local/freeswitch/conf libdir: >> ${exec_prefix}/lib datadir: /usr/local/freeswitch localstatedir: >> /usr/local/freeswitch includedir: /usr/local/freeswitch/include/freeswitch >> certsdir: /usr/local/freeswitch/certs dbdir: /usr/local/freeswitch/db >> grammardir: /usr/local/freeswitch/grammar htdocsdir: >> /usr/local/freeswitch/htdocs fontsdir: /usr/local/freeswitch/fonts >> logfiledir: /usr/local/freeswitch/log modulesdir: /usr/local/freeswitch/mod >> pkgconfigdir: ${exec_prefix}/lib/pkgconfig recordingsdir: >> /usr/local/freeswitch/recordings imagesdir: /usr/local/freeswitch/images >> runtimedir: /usr/local/freeswitch/run scriptdir: >> /usr/local/freeswitch/scripts soundsdir: /usr/local/freeswitch/sounds >> storagedir: /usr/local/freeswitch/storage cachedir: >> /usr/local/freeswitch/cache >> >> Can I provide any other detail to get help with this upgrade? >> > _________________________________________________________________________ > > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN > services. > Build your next product on our scalable cloud platform. > > Join our online community to chat in real time > https://signalwire.community > > Professional FreeSWITCH Services > sales(a)freeswitch.com > https://freeswitch.com > > Official FreeSWITCH Sites > https://freeswitch.com/oss > https://freeswitch.org/confluence > https://cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > https://freeswitch.com

1 0

Re: [Freeswitch-users] FreeSWITCH-users_Digest,_Vol_168,_Issue_18
by stephen＠picardogroup.com 09 Jun '20

09 Jun '20

1 0

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 168, Issue 18
by Stephen Picardo 09 Jun '20

09 Jun '20

I will try that today. Thank you ⁣Sent from Blue On Jun 9, 2020, 1:05 AM, at 1:05 AM, freeswitch-users-request(a)lists.freeswitch.org wrote: >Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > >You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of FreeSWITCH-users digest..." > > >------------------------------------------------------------------------ > >Today's Topics: > > 1. Re: strange warnings on new install on debian 10 (Mike Jerris) > 2. mod_python (David Villasmil) > 3. Re: strange warnings on new install on debian 10 (John Covici) > 4. Re: FreeSWITCH and DTMF (stephen(a)picardogroup.com) > 5. Re: mod_python (Joel Serrano) > 6. Re: FreeSWITCH and DTMF (Faisal Hanif) > > >------------------------------------------------------------------------ > >From: Mike Jerris <mike(a)freeswitch.org> >To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >Sent: Mon Jun 08 13:59:21 EDT 2020 >Subject: Re: [Freeswitch-users] strange warnings on new install on >debian 10 > >This error means there are installed modules that were not installed >from this build, they are left over in the installed locations from a >previous (in this case quite old) build. Those modules are not going to >work properly due to api changes over time. > >> On Jun 6, 2020, at 1:45 PM, John Covici <covici(a)ccs.covici.com> >wrote: >> >> Hi. I have a new install of fs on a Debian 10 install -- not quite >a >> clean install -- but I did get the bdeps and I compiled from source. >> Here are the warnings: >> >> Checking module integrity in target [/usr/local/freeswitch/mod] >> >> WARNING: installed module: mod_spidermonkey_core_db.so was not >> installed by this build. It is not present in modules.conf. >> WARNING: installed module: mod_spidermonkey_curl.so was not installed >> by this build. It is not present in modules.conf. >> WARNING: installed module: mod_spidermonkey.so was not installed by >> this build. It is not present in modules.conf. >> WARNING: installed module: mod_spidermonkey_socket.so was not >> installed by this build. It is not present in modules.conf. >> WARNING: installed module: mod_spidermonkey_teletone.so was not >> installed by this build. It is not present in modules.conf. >> >> I don't see any reference to spidermonkey anywhere in the fs source >> so I am confused as to how to fix. > > > > >------------------------------------------------------------------------ > >From: David Villasmil <david.villasmil.work(a)gmail.com> >To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >Sent: Mon Jun 08 17:23:09 EDT 2020 >Subject: [Freeswitch-users] mod_python > >Hello all, > >Is there some catching on mod_pythons scripts? >If i change a script it doesn't show up until i completely restart >freeswitch.. > >Regards, > >David Villasmil >email: david.villasmil.work(a)gmail.com >phone: +34669448337 > > >------------------------------------------------------------------------ > >From: John Covici <covici(a)ccs.covici.com> >To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >Sent: Mon Jun 08 18:36:39 EDT 2020 >Subject: Re: [Freeswitch-users] strange warnings on new install on >debian 10 > >You were right, I have no idea from where they came, but thank >goodness they are gone. > >On Mon, 08 Jun 2020 13:59:21 -0400, >Mike Jerris wrote: >> >> This error means there are installed modules that were not installed >from this build, they are left over in the installed locations from a >previous (in this case quite old) build. Those modules are not going to >work properly due to api changes over time. >> >> > On Jun 6, 2020, at 1:45 PM, John Covici <covici(a)ccs.covici.com> >wrote: >> > >> > Hi. I have a new install of fs on a Debian 10 install -- not >quite a >> > clean install -- but I did get the bdeps and I compiled from >source. >> > Here are the warnings: >> > >> > Checking module integrity in target [/usr/local/freeswitch/mod] >> > >> > WARNING: installed module: mod_spidermonkey_core_db.so was not >> > installed by this build. It is not present in modules.conf. >> > WARNING: installed module: mod_spidermonkey_curl.so was not >installed >> > by this build. It is not present in modules.conf. >> > WARNING: installed module: mod_spidermonkey.so was not installed by >> > this build. It is not present in modules.conf. >> > WARNING: installed module: mod_spidermonkey_socket.so was not >> > installed by this build. It is not present in modules.conf. >> > WARNING: installed module: mod_spidermonkey_teletone.so was not >> > installed by this build. It is not present in modules.conf. >> > >> > I don't see any reference to spidermonkey anywhere in the fs source >> > so I am confused as to how to fix. >> >> >_________________________________________________________________________ >> >> The FreeSWITCH project is sponsored by SignalWire >https://signalwire.com >> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN >services. >> Build your next product on our scalable cloud platform. >> >> Join our online community to chat in real time >https://signalwire.community >> >> Professional FreeSWITCH Services >> sales(a)freeswitch.com >> https://freeswitch.com >> >> Official FreeSWITCH Sites >> https://freeswitch.com/oss >> https://freeswitch.org/confluence >> https://cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> https://freeswitch.com >> > >-- >Your life is like a penny. You're going to lose it. The question is: >How do >you spend it? > > John Covici wb2una > covici(a)ccs.covici.com > > > > >------------------------------------------------------------------------ > >From: stephen(a)picardogroup.com >To: "freeswitch-users(a)lists.freeswitch.org" ><freeswitch-users(a)lists.freeswitch.org> >Sent: Mon Jun 08 19:47:59 EDT 2020 >Subject: Re: [Freeswitch-users] FreeSWITCH and DTMF > >Have built a new FS box using debian 10 and FS 1.10. We use Flowroute >as carrier. On outbound leg we always connect to number dialed but >sometimes we do not hear the DTMF being sent in return. > > >So question is: > >What could be reason why freeswitch is recognizing DTMF signals >received from some endpoints but not others? > > >Stephen > > > >------------------------------------------------------------------------ > >From: Joel Serrano <joel(a)textplus.com> >To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >Sent: Mon Jun 08 20:13:17 EDT 2020 >Subject: Re: [Freeswitch-users] mod_python > >Hey David, > >One guess: try and see if you happen to have any *.pyc files there, and >if >so delete them and see if when you run through the app_python dialplan >part >they are recreated? > >Joel. > >On Mon, Jun 8, 2020 at 2:23 PM David Villasmil < >david.villasmil.work(a)gmail.com> wrote: > >> Hello all, >> >> Is there some catching on mod_pythons scripts? >> If i change a script it doesn't show up until i completely restart >> freeswitch.. >> >> Regards, >> >> David Villasmil >> email: david.villasmil.work(a)gmail.com >> phone: +34669448337 >> >_________________________________________________________________________ >> >> The FreeSWITCH project is sponsored by SignalWire >https://signalwire.com >> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN >> services. >> Build your next product on our scalable cloud platform. >> >> Join our online community to chat in real time >> https://signalwire.community >> >> Professional FreeSWITCH Services >> sales(a)freeswitch.com >> https://freeswitch.com >> >> Official FreeSWITCH Sites >> https://freeswitch.com/oss >> https://freeswitch.org/confluence >> https://cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> https://freeswitch.com > > >------------------------------------------------------------------------ > >From: Faisal Hanif <imfanee(a)gmail.com> >To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> >Sent: Tue Jun 09 01:04:57 EDT 2020 >Subject: Re: [Freeswitch-users] FreeSWITCH and DTMF > >Hi, > >Please sync DTMF settings with the carrier. If carrier is using INFO >but >your settings is INBAND then you will only receive if DTMF as voice if >the >far end is sending it INBAND. > >Regards, > >Faisal > >On Tue, 9 Jun 2020 at 05:07, <stephen(a)picardogroup.com> wrote: > >> Have built a new FS box using debian 10 and FS 1.10. We use Flowroute > as >> carrier. On outbound leg we always connect to number dialed but >sometimes >> we do not hear the DTMF being sent in return. >> >> So question is: >> What could be reason why freeswitch is recognizing DTMF signals >received >> from some endpoints but not others? >> >> Stephen >> >_________________________________________________________________________ >> >> The FreeSWITCH project is sponsored by SignalWire >https://signalwire.com >> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN >> services. >> Build your next product on our scalable cloud platform. >> >> Join our online community to chat in real time >> https://signalwire.community >> >> Professional FreeSWITCH Services >> sales(a)freeswitch.com >> https://freeswitch.com >> >> Official FreeSWITCH Sites >> https://freeswitch.com/oss >> https://freeswitch.org/confluence >> https://cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> https://freeswitch.com > > > >-- >Regards, > >Faisal Hanif > > >------------------------------------------------------------------------ > >_________________________________________________________________________ > >The FreeSWITCH project is sponsored by SignalWire >https://signalwire.com >Enhance your FreeSWITCH install with disruptive priced SMS and PSTN >services. >Build your next product on our scalable cloud platform. > >Join our online community to chat in real time >https://signalwire.community > >Professional FreeSWITCH Services >sales(a)freeswitch.com >https://freeswitch.com > >Official FreeSWITCH Sites >https://freeswitch.com/oss >https://freeswitch.org/confluence >https://cluecon.com > >FreeSWITCH-users mailing list >FreeSWITCH-users(a)lists.freeswitch.org >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >https://freeswitch.com

1 0

mod_python
by David Villasmil 09 Jun '20

09 Jun '20

Hello all, Is there some catching on mod_pythons scripts? If i change a script it doesn't show up until i completely restart freeswitch.. Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 2

Re: [Freeswitch-users] FreeSWITCH and DTMF
by stephen＠picardogroup.com 09 Jun '20

09 Jun '20

2 1

strange warnings on new install on debian 10
by John Covici 08 Jun '20

08 Jun '20

Hi. I have a new install of fs on a Debian 10 install -- not quite a clean install -- but I did get the bdeps and I compiled from source. Here are the warnings: Checking module integrity in target [/usr/local/freeswitch/mod] WARNING: installed module: mod_spidermonkey_core_db.so was not installed by this build. It is not present in modules.conf. WARNING: installed module: mod_spidermonkey_curl.so was not installed by this build. It is not present in modules.conf. WARNING: installed module: mod_spidermonkey.so was not installed by this build. It is not present in modules.conf. WARNING: installed module: mod_spidermonkey_socket.so was not installed by this build. It is not present in modules.conf. WARNING: installed module: mod_spidermonkey_teletone.so was not installed by this build. It is not present in modules.conf. I don't see any reference to spidermonkey anywhere in the fs source so I am confused as to how to fix. Thanks in advance for any suggestions. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una covici(a)ccs.covici.com

3 3

Record a WebRTC call
by Nathan Stratton 08 Jun '20

08 Jun '20

I have tried mod_mp4 and mod_mp4v2, but give the same error: 2020-06-03 15:03:50.265573 [NOTICE] switch_ivr_originate.c:3794 Channel [sofia/external/2000(a)sip.vocinity.com] has been answered EXECUTE [depth=0] sofia/external/2000(a)sip.vocinity.com record_session(/recordings/20200603150346_2000.mp4) 2020-06-03 15:03:50.265573 [DEBUG] mod_mp4v2.c:357 sample rate: 44100, channels: 1 2020-06-03 15:03:50.265573 [INFO] mod_mp4v2.c:402 Opening File [/tmp/bde19022-b1fb-405b-9417-34b10994c775.mp4] 44100hz with VIDEO 2020-06-03 15:03:50.265573 [WARNING] switch_core_codec.c:727 Codec PCMU Exists but not at the desired implementation. 44100hz 20ms 1ch 2020-06-03 15:03:50.265573 [ERR] mod_mp4v2.c:415 Audio Codec Activation Fail 2020-06-03 15:03:50.265573 [WARNING] switch_core_file.c:359 Spool dir is set. Make sure [/tmp/bde19022-b1fb-405b-9417-34b10994c775.mp4] is also a valid path 2020-06-03 15:03:50.265573 [ERR] switch_ivr_async.c:2818 Error opening /recordings/20200603150346_2000.mp4 2020-06-03 15:03:50.265573 [DEBUG] switch_channel.c:3865 (sofia/external/ 2000(a)sip.vocinity.com) Callstate Change EARLY -> ACTIVE ><> nathan stratton

4 9

BBB sound problems
by Mettavihari D 06 Jun '20

06 Jun '20

Greetings We hav setup BBB with Freeswitch We have problems with sound errors We get 1006 timeout errors Our setup is as follows I have change the firewall NAT Rule Like below iptables -t nat -A PREROUTING -i $fwan -d (Public IP) -p tcp -m multiport --dports 5066,7443 -j DNAT --to 192.168.1.130 iptables -t nat -A PREROUTING -i $fwan -d (Public IP) -p udp -m multiport --dports 16384:32768 -j DNAT --to 192.168.1.130 firewall NAT Prerouting test : external pc : netcat external_ip 5066 hello bigbluebutton server: netcat -l 5066 hello netcat test is ok. but still system has 1006 timeout error in /opt/freeswitch/log/freeswitch.log 2020-06-03 09:50:35.120445 [DEBUG] mod_verto.c:4271 192.168.1.5:35990 Client Connect from 192.168.1.5:35990 accepted 2020-06-03 09:50:35.120445 [DEBUG] mod_verto.c:2019 192.168.1.5:35990 Starting client thread. 2020-06-03 09:50:35.120445 [NOTICE] mod_verto.c:1875 192.168.1.5:35990 WS SETUP FAILED 2020-06-03 09:50:35.120445 [DEBUG] mod_verto.c:2046 192.168.1.5:35990 Ending client thread. 2020-06-03 09:50:35.120445 [DEBUG] mod_verto.c:2054 192.168.1.5:35990 Thread ended Please help with what we have done wrong Mettavihari

1 1