- FreeSWITCH-users - FreeSWITCH Mailing Lists

Playback in a loop
by Ali Pey 02 Jan '14

02 Jan '14

Hello, Is there a way to playback a file in a loop? I'm trying to find a way to put the a-leg on hold with music while b-leg gets some prompts to do a initiate a transfer. I have looked at endless_playback, but the problem seems to be that there is no way to stop the play back and bridge the call again. Is that still true with endless_playback? Regards, Ali Pey

4 12

Cross compiling freeswitch for raspberry pi
by Dušan Dragić 01 Jan '14

01 Jan '14

Hi all, This weekend I tried my luck at cross-compiling freeswitch for raspberry pi (armv6). After a few bumps along the way (opened jiras for those) I managed to build it, but when running freeswitch on the target system it segfaults during startup. I'm building on Fedora 19 x86_64 using the prebuilt toolchain from https://github.com/raspberrypi/tools (I can build a toolchain from source if anyone thinks it might be better). Raspbian debootstrap created base system is used as sysroot (also tried loop mounted raspbian image as sysroot). My simple build environment setup script: http://pastebin.freeswitch.org/21698 The build process (source the script, configure and compile): ./bootstrap.sh . ~/fs-cc-env.sh ./configure --build=x86_64-redhat-linux --host=arm-linux-gnueabihf --with-sysroot=$SYSROOT make make install didn't work (I guess it's kinda expected, didn't really look into it) so I just copied the binaries, libraries and modules to rpi. Also mod_spidermonkey and mod_xml_rpc were disabled. Didn't even try to build mod_spidermonkey and mod_xml_rpc failed to build (well it builds but makefile tries to run libs/xmlrpc-c/lib/expat/gennmtab/gennmtab which was compiled for arm and should have been x86, probably should create jira for this as well). Console log when FS is started: http://pastebin.freeswitch.org/21699 and backtrace: http://pastebin.freeswitch.org/21700 Is my build environment sane? What am I missing, any hints? Has anyone successfully cross-compiled FS for raspberry pi? Thanks, -- Dušan Dragić

5 6

Parallela board - interesting for FreeSWITCH?
by Bob Hartwig 01 Jan '14

01 Jan '14

Does anyone here have an opinion on the Parallela board - http://www.adapteva.com/products/parallella/parallella/ - as a platform for FreeSWITCH? Could it be appropriate for applications that need to be small and inexpensive, but also capable of doing a fair amount of real-time transcoding? Bob

4 4

CTI experience
by Moshe3t 31 Dec '13

31 Dec '13

HI Does anyone have experience setting up a CTI (Computer telephony integration), to be used for CRM screen pops and Click to call. Thanks

5 4

How to terminate a dialog if I do not have uuid?
by Mino Haluz 31 Dec '13

31 Dec '13

Hi, what could be the most efficient way to terminate dialog with RPC when all I have are only inbound/outbound CallIDs? There is uuid_kill command, but it requires uuids of channels. Thanks, Mino

2 1

New JavaScript module using Google V8!
by Peter Olsson 31 Dec '13

31 Dec '13

Hello everyone, and Happy New Year! I've been testing out some Google V8 embedding at home, and since I was at it I decided to try to port mod_spidermonkey to use Google V8 instead. A few years back this wasn't possible, since V8 wasn't thread safe - but this has changed, and it works as expected using isolates and lockers inside. RIght now I've ported everything to work as before, but using Google V8 instead of SpiderMonkey. I've tested some basic stuff, and it seems ok so far - but I do have quite some more testing I need to do. Also, the build system is not really completed yet, so some manual work is needed to compile everything. I've developed it on Windows, but it should be able to compile on Linux without any major issues (I will try that pretty soon as well). I'm guessing this would make JavaScript to be a little more efficient than today, however, I didn't really do any performance testing yet. Even though Lua is the recommended scripting language in FS, I think JS always will have quite some users, since it's more widely spread. One thing though, is that it currently lacks support for the "File" and "XML" object that is currently compiled in when you use mod_spidermonkey - besides that everything else should be the same. Is this project of interest for the FS community? For me this was just a way to get to use V8 in an environment I already knew, so as soon as I'm getting it a bit more complete (with a working build system at least) I'd be happy to give away the code - and hopefully replace mod_spidermonkey in the future. /Peter

2 2

How to measure Round-Trip-Delay between client and FS
by adahary 31 Dec '13

31 Dec '13

The FS uses the 'nat-options-ping' to keep the client natted hole open BUT it does not provide the round-trip-delay of the sent message. Is there a way to send a kind of SIP/OPTION messge from the FS to a specific remote client (not a global setup) and measure the round-trip-delay of that message? Regards -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/How-to-measure-Round-Trip-Del… Sent from the freeswitch-users mailing list archive at Nabble.com.

1 0

receiving sms
by Arya Farzan 31 Dec '13

31 Dec '13

Hello I have never used FreeSWITCH and I've become interested in it since it has a mod called mod_sms. I'm not clear if it can meet my needs. I want to buy voip DIDs and configure Freeswitch to receive SMS messages. Would this be possible with Freeswitch with mod_sms? Regards!

2 1

FusionPBX/FreeSWITCH : Wrong context is being used for outbound calls
by juned 31 Dec '13

31 Dec '13

Hi All, I am having issue with Outbound calls. I am not writing confguration in XML instead of that i am writing configs in database, for that i am following below link. http://wiki.fusionpbx.com/index.php?title=XML_Handler I have created and extension and gateway, but contect is being changed when i am making outbound calls. By enabling the debug logs i have found the issue with context. Wrong context is being selected for calls. Below are the logs in which in query it selects public as context but in actual XML file it shows correct context. [xml_handler] SQL: select * from v_dialplans as d, v_dialplan_details as s where d.dialplan_context = 'public' and d.dialplan_enabled = 'true' and d.dialplan_uuid = s.dialplan_uuid order by d.dialplan_order asc, d.dialplan_name asc, d.dialplan_uuid asc, s.dialplan_detail_group asc, CASE s.dialplan_detail_tag WHEN 'condition' THEN 1 WHEN 'action' THEN 2 WHEN 'anti-action' THEN 3 ELSE 100 END, s.dialplan_detail_order asc 2013-12-31 16:58:00.814654 [NOTICE] switch_cpp.cpp:1288 [xml_handler] dialplan:public source: database <variables> <variable name="domain_uuid" value="49768d38-6da7-4a40-a424-4ec379954ebd"/> <variable name="domain_name" value="abc.test.com"/> <variable name="extension_uuid" value="86f14c1d-0e67-4e86-b3bc-d3e54782a67f"/> <variable name="caller_id_name" value="123456"/> <variable name="caller_id_number" value="123456"/> <variable name="accountcode" value="7681006065"/> <variable name="user_context" value="abc.test.com"/> <variable name="directory-visible" value="true"/> <variable name="directory-exten-visible" value="true"/> <variable name="limit_max" value="5"/> <variable name="record_stereo" value="true"/> <variable name="transfer_fallback_extension" value="operator"/> <variable name="export_vars" value="domain_name"/> </variables> What could be the issue ? why wrong context is being selected for extensions ? Thanks Juned Khan -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/FusionPBX-FreeSWITCH-Wrong-co… Sent from the freeswitch-users mailing list archive at Nabble.com.

1 0

[OT] How do I port my home phone number to a SIP address?
by Jun Sun 30 Dec '13

30 Dec '13

Hi, guys, This might be a little off topic, but I think many experts here may know this already. :) I have a VOIP server set up and running. Now I start to think how to port my home phone number to this server. Basically what I want is if someone calls my home phone number I like to see a SIP connection to my own VOIP server. Currently I'm using bbtalk as my home phone service. I'm pretty much sure they don't provide this service. Who would be able to provide this service? I live in USA. Thanks in advance. Jun

8 13