- FreeSWITCH-users - FreeSWITCH Mailing Lists

BLF lights sticking
by Tim St. Pierre 25 Mar '14

25 Mar '14

Hello, I just upgraded to 1.2.23 on Friday, from a much older 1.2 version (1.2.11 I think). Since then, I have had problems with BLF lamps not going out when a user hangs up. It's not all the time, just some of the time. I suspect it is when they get a second call, or some other less common situation. All end points are Aastra 67xx, and most are behind NAT. TCP vs. UDP doesn't seem to make a difference. Any ideas as to where to look? Thanks! -Tim

3 4

Week in Review March 16th-22nd
by Kathleen King 25 Mar '14

25 Mar '14

Hello, again. This week in the FreeSWITCH master branch we had an amazing amount of work done with the majority of it going toward build support. The week ended with a total of 159 commits! Some big changes came with Freeswitch attempting to use the system versions of pcre, sqlite, speex, and curl rather than automatically using the in tree version. Also, there have been fixes to be able to run configure specifying the srcdir which allows you to build Freeswitch outside of the source directory. The following bugs were squashed: 8d67246 FS-6374 --resolve mod_rayo sendfax was using uninitialized memory pool Jira: http://jira.freeswitch.org/browse/FS-6374 bd1492e FS-6287 fixed regression from 6e818216e2e615f3241a34253cdea8ee316d9e88 which caused 'operation has no matching challenge' error on outbound invites that are challenged in mod_sofia Jira: http://jira.freeswitch.org/browse/FS-6287 19fc943 FS-6360 Mitigate the CRIME TLS flaw New features that were added: 6d0e684 Upgrade windows build to use pcre 8.34 via getlib and to use speex 1.2rc1 via getlib Jira: http://jira.freeswitch.org/browse/FS-6348 dd242f3 Upgrade windows build to use curl 7.35.0 via getlib Jira: http://jira.freeswitch.org/browse/FS-6346 741cb88 FS-6349 Upgrade windows build to use sqlite 3.8.4.1 via getlib Jira: http://jira.freeswitch.org/browse/FS-6349 714e313 FS-353: add testing hack to use system xmlrpc-c Jira: http://jira.freeswitch.org/browse/FS-353 Improvements in cross platform build supports: 09811b5 FS-6369: fix uninstall on mod_managed Jira: http://jira.freeswitch.org/browse/FS-6369 e85f06e Completely unbundle pcre 9df1727 fix uninitialized variables in mod_translate cba9af4 Drop mod_perl from the debian build temporarily aeebd71 FS-6375 exclude sun from modem support in spandsp Jira: http://jira.freeswitch.org/browse/FS-6375 1470622 Require libcurl as a system dependency 9f7399c FS-6293: fix lua to build using automake, so it works right with srcdir, and avoids the linking to .a is not portable warning Jira: http://jira.freeswitch.org/browse/FS-6293 9a94235 FS-6379: --resolve fix ldns bootstrap/build on solaris Jira: http://jira.freeswitch.org/browse/FS-6379 f6d9027 FS-6375 adjust ifdef for sun to allow for different hep_ipheader struct in libsofia Jira: http://jira.freeswitch.org/browse/FS-6375 3eb7862 FS-6293: fix mod_shout srcdir build Jira: http://jira.freeswitch.org/browse/FS-6293 3b1278a FS-353 Add curl auto PKG_CONFIG_PATH handling for OS X bf611fc Pull mod_v8 out of the default build And many more! In terms of stability these were the use cases that were fixed: f3acb03 FS-6341 fixed deadlock in mod_sofia introduced in commit 340b697 Some packaging updates: fb2c587 Add debian build-deps for mod_opal 6261e5a Drop mod_v8 from debian build for now 90404d5 Purge mod_voipcodecs from debian/control-modules 046df6b Export V=1 for debian builds 54cd0df Support change to system libspeex in debian 83125da update Debian packaging to use configure.ac files Feedback welcome and the referenced commits are in the attached text file with corresponding Jira links. -- Kathleen King Quentus Technologies, INC 1037 NE 65th St Suite 273 Seattle, WA 98115 Main: (877) 211-9337 Cell: (703) 859-3757 kathleen.king(a)quentustech.com

2 1

Hash sharing between 2 FS servers
by Kevin Mathy 25 Mar '14

25 Mar '14

Hi list, Today I'm trying to share some "limit" hashes between two Freeswitch servers (both running on 1.5.8b git version), but it doesn't work. I've made some tcpdump captures on the server which is trying to pull data from the other, and it seems like when pull requests are sent "automatically" (due to the hash.conf.xml configuration) there's no authentication phase before the "hash_dump" command is sent. Admitting that there's no necessary authentication, and that it's not an issue, nothing is received on my server, no hash is added... When I execute "hash_dump all" on the first server, I see something like : L/outgoing_0352620101/1/1/1/1395671049 And when I execute "hash_dump all" on the 2nd server, nothing is returned. And finally, when I try to crash the 1st server and recover the calls on the 2nd one, the leg with limit applied is simply "dropped" because of the lack of hashes on the 2nd server. So, maybe I forgot to set something on hash or event_socket, or anything else, configuration, and you'll be able to tell me ? Also, if you have any other idea to make a concurrent call limit to be shared between multiple FS servers, I'll be glad to ear it ! ;-) Thanks a lot, *Bien cordialement, Best Regards, **Kevin MATHY* | Ingénieur VoIP --

3 5

Bridge Hangup Problem
by Andrea Batazzi 25 Mar '14

25 Mar '14

Hi, I'm new to freeswitch, and might be missing some basic points. I am trying to bridge a call from a caller (sip client on the web) to an external profile endpoint, which happens to be an asterisk install. The call part works fine, only that if leg B ( asterisk ) hangs up ( say, for a queue timeout), the sip client (leg A) never receives the hangup event, even if the log seems to assert that it does. I have tried with different sip clients. this is the basic configuration of the extension <extension name="wwd"> <condition field="destination_number" expression="^123"$> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="sofia/external/$1(a)192.168.0.16"/> <action application="hangup" /> </condition> </extension> I have attached the "hangup" part of the log. Thank you Andrea

2 1

Re: [Freeswitch-users] Freeswitch as A-SBC
by Keith 24 Mar '14

24 Mar '14

Hi, I followed the same document, you can use Kamailio to handle and forward the registrations and location information, also provides some excellent security! We then use Freeswitch to handle the media, no transcoding. I built both from source to keep as "slim" as possible. Works well, but still tinkering to get optimum setup! Keith

1 0

avmd from mod managed
by Malay Thakershi 24 Mar '14

24 Mar '14

Hello, Is there a way to do AVMD from mod_managed? I see JavaScript example technique from http://wiki.freeswitch.org/wiki/Mod_avmd but it seems signature of StreamFile is different in mod_managed. In JavaScript, second argument to StreamFile is a function (OnInput) where detection is done while is mod_managed, it is sample start number. So is AVMD possible from mod_managed? Thank you. Malay

2 2

Diagnosing fairly basic directory problem
by Alex Lake 24 Mar '14

24 Mar '14

Been reorganising the way in which our FS scripts are built and I've been getting quite frustrated attempting to work out why FS is saying 2014-03-24 10:00:12.744887 [WARNING] sofia_reg.c:2543 Can't find user [0095302(a)46.4.12.14] from 84.92.90.149 You must define a domain called '46.4.12.14' in your directory and add a user with the id="0095302" attribute and you must configure your device to use the proper domain in it's authentication credentials. Yet when I look at freeswitch.xml.fsxml it all looks just fine - here's an extract: <domain name="46.4.12.14"> <params> <param name="dial-string" value="{sip_invite_domain=${dialed_domain},presence_id=${dialed_user}@${dialed_domain}}${sofia_contact(${dialed_user}@${dialed_domain})}"/> </params> <variables> <variable name="record_stereo" value="true"/> <variable name="default_gateway" value="example.com"/> <variable name="default_areacode" value="918"/> <variable name="transfer_fallback_extension" value="operator"/> </variables> <users> <user id="0095302"> <params> <param name="password" value="xxxx-xxxx-xxxx" /> <param name="vm-password" value="12345678" /> <param name="vm-alternate-greet-id" value="302" /> <param name="vm-mailto" value="" /> <param name="vm-mailfrom" value="vm-ext302(a)sb0095.dmclub.net" /> <param name="vm-attach-file" value="true" /> <param name="vm-email-all-messages" value="true" /> <param name="vm-keep-local-after-email" value="false" /> <param name="vm-disk-quota" value="3600" /> </params> <variables> </variable> </user> </users> </domain> .... I'm wondering: 1) what tools there are to list the users or to better diagnose what's going on 2) when this message is given, I presume it's irrespective of whether the password is correct or not (it can't even find the user, let alone authenticate it - right?) Thanks for any help...

2 4

freeswtich request on port 4242?
by Terry Barnum 24 Mar '14

24 Mar '14

While playing with freeswitch yesterday, Little Snitch reported that freeswitch immediately upon launch tries to establish a connection to 82.45.148.209 and 2001:503:ba3e::2:30 on port 4242. A whois shows the ipv4 to be from Telewest Broadband in the UK. The only port 4242 setting I find is in conf/autoload_configs/event_multicast.conf.xml but for 225.1.1.1. Blocking the connection prevents sofia from registering with flowroute so I'm curious what it is. I couldn't find any relevant search results. FreeSWITCH Version 1.5.11b+git~20140301T003717Z~f2331de68b~64bit (git f2331de 2014-03-01 00:37:17Z 64bit) Thanks, -Terry

4 6

i want the file Life Cycle of a Call-Simple.png, thinks
by rocky xiao 24 Mar '14

24 Mar '14

who can send me the file: Life Cycle of a Call-Simple.png for understanding the call flow in freeswitch. thanks.

2 1

FreeSWITCH behind kamailio.
by tonchek＠mac.com 24 Mar '14

24 Mar '14

Hi! I have one question. So, I have FS behind Kamailio. Kamailio is performing user authentication and after successful send REGISTER messages to FS. FS has ACL, that allows to accept registrations from Kamailio without real authentication, but in this case FS just ‘accept’ registration and doesn’t make database lookup. But I would like FS to make DB lookup and retrieve user-specific attributes such as language code, name etc.. from database and store it in session. It works just if user directly registering on FS. Does anyone have suggestion how to directory execute script on user registration without real registration ) So, FS has: accept-blind-auth=false accept-blind-reg=false apply-register-acl=acl-in <configuration name="acl.conf" description="Network Lists"> <network-lists> <list name="altnova-in" default="deny"> <node type="allow" cidr=“[KAMAILIO_IP_HERE]/32"/> </list> </network-lists> </configuration> Thank you in advance! — - Anton

1 0