- FreeSWITCH-users - FreeSWITCH Mailing Lists

ClueCon 2020 Online
by Anthony Minessale 23 Jul '20

23 Jul '20

Hi, If you haven't already noticed. We are holding ClueCon 2020 online this year due to Covid. If you haven't already, sign up and attend. There is no cost this year. We have prizes, so also sign up for our hackathon and Dangerous Demos which will be live on video along with all of the presentations. -- Anthony Minessale II Founder, FreeSWITCH. http://freeswitch.com https://youtu.be/l_hOxzCt6X4 https://www.youtube.com/watch?v=oAxXgyx5jUw https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA

1 0

Editing the FreeSWITCH Wiki
by Flavio Donadio 23 Jul '20

23 Jul '20

Hello, After working for two weeks (lots of reading and trial/error!) on the configuration of a home PBX with FreeSWITCH and an AudioCodes MP-114 FXS/FXO gateway, I have to admit I got everything I wanted working. I also took the time to document the process for future reference. The existing Wiki page on the AudioCodes MP-114/118 (https://freeswitch.org/confluence/pages/viewpage.action?pageId=9634420) helped, but it’s really poor. If configured that way, calls to the PSTN will drop in 3 minutes, users won’t hear tones when calling and some other problems will occur. So, I would like to edit the Wiki and add a proper article with all the information needed to have a good, really working setup. How can I do that? Regards, Flavio

2 2

Error creating SIP ua profile
by Tim Bertulies 23 Jul '20

23 Jul '20

Hi, occasionally when I rewrite a configuration to the freeswitch and try to restart the gateway I get the error message "error creating SIP ua for profile ...". I cannot start it then manually via "sofia profile start..." (same error message every time), the only thing that works is "reload mod_sofia", which makes everything work again. Unfortunately this is not an option, as other gateways must stay active. Can anybody point me to a reason why this happens? If you need any further information I am happy to provide these. Kind regards, Tim Bertulies

2 1

rtp-timer-name=soft and WebRTC sound quality in Chrome
by Eugene Prokopiev 23 Jul '20

23 Jul '20

Hi, I've found very bad WebRTC sound quality in Chrome (in opposite to FF) and found that this issue can be fixed on FS side via some params in Sofia profile: rtp-timer-name=soft - no any sound with this param as is inbound-late-negotiation=true - good sound quality in Chrome with this and previous But these two params has no effect for outbound calls: bad quality without both and no any sound with them Can anybody explain why and how to fix this? -- WBR, Eugene Prokopiev

2 1

How can enable thread id in freeswitch log ?
by billfredq 23 Jul '20

23 Jul '20

2 1

Stable release for Buster
by Tor Petterson 23 Jul '20

23 Jul '20

Hi Is there an official stable release for Debian Buster? I can only find 1.10 in https://files.freeswitch.org/repo/deb/freeswitch-1.8/ This seems to be a testing version that keeps introducing different bugs so it is unacceptable for a production environment.

3 3

Debian 10 install fails to start
by John Tuxies 23 Jul '20

23 Jul '20

After following the installation guide of https://freeswitch.org/confluence/display/FREESWITCH/Debian+10+Buster the installation finished successfully without any problems. Although when i type fs_cli -rRS i am getting a connection error. I have tried to stop/start the service and i have the following: *root@fsopen216: ~ $ service freeswitch stoproot@fsopen216: ~ $ service freeswitch startroot@fsopen216: ~ $ service freeswitch status● freeswitch.service - freeswitch Loaded: loaded (/lib/systemd/system/freeswitch.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-07-14 13:23:58 EEST; 6s ago Process: 813 ExecStart=/usr/bin/freeswitch -u ${USER} -g ${GROUP} -ncwait ${DAEMON_OPTS} (code=exited, status=0/S Process: 810 ExecStartPre=/bin/chown -R ${USER}:${GROUP} /var/lib/freeswitch /var/log/freeswitch /etc/freeswitch Main PID: 814 (freeswitch) Tasks: 34 (limit: 4915) CGroup: /system.slice/freeswitch.service └─814 /usr/bin/freeswitch -u freeswitch -g freeswitch -ncwait -nonatJul 14 13:23:56 fsopen216 systemd[1]: freeswitch.service: Service hold-off time over, scheduling restart.Jul 14 13:23:56 fsopen216 systemd[1]: Stopped freeswitch.Jul 14 13:23:56 fsopen216 systemd[1]: Starting freeswitch...Jul 14 13:23:56 fsopen216 freeswitch[813]: 814 Backgrounding.Jul 14 13:23:58 fsopen216 freeswitch[813]: FreeSWITCH[813] Waiting for background process pid:814 to be ready.....Jul 14 13:23:58 fsopen216 freeswitch[813]: FreeSWITCH[813] System Ready pid:814Jul 14 13:23:58 fsopen216 systemd[1]: Started freeswitch.lines 1-17/17 (END)root@fsopen216: ~ $ fs_cli -rRS[ERROR] fs_cli.c:1691 main() Error Connecting [][INFO] fs_cli.c:1697 main() Retrying[ERROR] fs_cli.c:1691 main() Error Connecting []^CInterrupted.root@fsopen216: ~ $* Any ideas please?

2 1

Freeswitch bypassing gateway
by Shahnawaj Khan 23 Jul '20

23 Jul '20

Hello All, I am trying to configure my Freeswitch to initiate the call leg through gateway only. If I use <action application="bridge" data="sofia/gateway/LocalTelco/1000"/> It is working fine and forwarding the call to "LocalTelco" for 1000. but whenever i add domain with user part such as <action application="bridge" data="sofia/gateway/LocalTelco/1000(a)mydomain.com"/> it is bypassing the "LocalTelco" and forwarding call directly to "mydomain.com". Please let me know if it is possible to forward calls through gateway even if the domain is present. Any insight is welcomed! Thanks & Regards, Shahnawaj Khan

3 2

Registering with external SIP provider
by LuKaRo 23 Jul '20

23 Jul '20

Hi everyone, I'm unable to register freeswitch with an external SIP provider. I gave the pages on sofia on the wiki already a good read, but I can't get it to work. One special thing is that my machine has multiple network interfaces and needs to use a specific one to connect to the external SIP provider. Therefore, I copied "external.xml" in "/opt/freeswitch/conf/sip_profiles" to "my-sip.xml" and changed the values for "rtp-ip", "sip-ip", "ext-rtp-ip" and "ext-sip-ip" to the IP address of the interface freeswitch should use, and added the "my-sip" directory to the "<X-PRE-PROCESS cmd="include" header. Then I created "/opt/freeswitch/conf/sip_profiles/my-sip/my-sip.xml" with the following contents: <include> <gateway name="my-telephony"> <param name="proxy" value="<ip address of SIP provider>"/> <param name="username" value="49xxxxxxxxxx"/> <param name="extension" value="49xxxxxxxxxx"/> <param name="password" value="passwordisnotneeded"/> <param name="register" value="true"/> <param name="register-transport" value="tcp"/> <param name="context" value="public"/> </gateway> </include> "sofia status" on the fs_cli lists the profile as "REGED": my-sip profile sip:mod_sofia@<local ip address>:5060 RUNNING (0) my-sip::my-sip gateway sip:49xxxxxxxxxx@<ip address of SIP provider> REGED ss -an|grep <ip address of SIP provider> also lists two established TCP-connections: tcp ESTAB 0 0 <local ip address>:46878 <ip address of SIP provider>:5060 tcp ESTAB 0 0 <local ip address>:5060 <ip address of SIP provider>:25976 However, "sofia status profile my-sip reg" shows 0 registrations: Registrations: ================================================================================================= Total items returned: 0 ================================================================================================= And when issuing a call from outside to the extension registered at the SIP provider, I just get a busy signal on the phone. Logs of the external SIP provider report "recipient unavailable". Any ideas what could be wrong or how to further diagnose this issue? How can I check if the call reaches freeswitch? Thanks a lot in advance, LuKaRo

2 2

mod_python build error
by Tamer Higazi 23 Jul '20

23 Jul '20

Hi people, mod_python fails to build. Any ideas why that happen ? best, Tamer making all mod_python make[5]: Entering directory '/usr/local/src/freeswitch/src/mod/languages/mod_python' CC mod_python_la-mod_python.lo mod_python.c: In function 'print_python_error': mod_python.c:107:66: error: implicit declaration of function 'PyString_Check'; did you mean 'PyMapping_Check'? [-Werror=implicit-function-declaration] 107 | if (pyType != NULL && (pyString=PyObject_Str(pyType))!=NULL && (PyString_Check(pyString))) { | ^~~~~~~~~~~~~~ | PyMapping_Check mod_python.c:108:18: error: implicit declaration of function 'PyString_AsString' [-Werror=implicit-function-declaration] 108 | strcat(buffer, PyString_AsString(pyString)); | ^~~~~~~~~~~~~~~~~ mod_python.c:108:18: error: passing argument 2 of 'strcat' makes pointer from integer without a cast [-Werror=int-conversion] 108 | strcat(buffer, PyString_AsString(pyString)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int In file included from /usr/include/features.h:450, from /usr/include/bits/libc-header-start.h:33, from /usr/include/limits.h:26, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:194, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/syslimits.h:7, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:34, from /usr/include/python3.7m/Python.h:11, from mod_python.c:35: /usr/include/bits/string_fortified.h:126:1: note: expected 'const char * restrict' but argument is of type 'int' 126 | __NTH (strcat (char *__restrict __dest, const char *__restrict __src)) | ^~~~~ mod_python.c:118:18: error: passing argument 2 of 'strcat' makes pointer from integer without a cast [-Werror=int-conversion] 118 | strcat(buffer, PyString_AsString(pyString)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int In file included from /usr/include/features.h:450, from /usr/include/bits/libc-header-start.h:33, from /usr/include/limits.h:26, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:194, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/syslimits.h:7, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:34, from /usr/include/python3.7m/Python.h:11, from mod_python.c:35: /usr/include/bits/string_fortified.h:126:1: note: expected 'const char * restrict' but argument is of type 'int' 126 | __NTH (strcat (char *__restrict __dest, const char *__restrict __src)) | ^~~~~ mod_python.c:136:21: error: passing argument 2 of 'strcat' makes pointer from integer without a cast [-Werror=int-conversion] 136 | strcat(buffer, PyString_AsString(pyResult)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int In file included from /usr/include/features.h:450, from /usr/include/bits/libc-header-start.h:33, from /usr/include/limits.h:26, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:194, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/syslimits.h:7, from /usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/include-fixed/limits.h:34, from /usr/include/python3.7m/Python.h:11, from mod_python.c:35: /usr/include/bits/string_fortified.h:126:1: note: expected 'const char * restrict' but argument is of type 'int' 126 | __NTH (strcat (char *__restrict __dest, const char *__restrict __src)) | ^~~~~ mod_python.c:153:40: error: format '%s' expects argument of type 'char *', but argument 3 has type 'int' [-Werror=format=] 153 | sprintf((char*)sTemp, "\n\tFile: \"%s\", line %i, in %s", | ~^ | | | char * | %d 154 | PyString_AsString(pyTB->tb_frame->f_code->co_filename), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int mod_python.c:153:58: error: format '%s' expects argument of type 'char *', but argument 5 has type 'int' [-Werror=format=] 153 | sprintf((char*)sTemp, "\n\tFile: \"%s\", line %i, in %s", | ~^ | | | char * | %d ...... 156 | PyString_AsString(pyTB->tb_frame->f_code->co_name) ); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int mod_python.c: In function 'eval_some_python': mod_python.c:313:18: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 313 | *str = strdup((char *) PyString_AsString(result)); | ^ mod_python.c: In function 'mod_python_shutdown': mod_python.c:608:2: error: 'PyEval_AcquireLock' is deprecated [-Werror=deprecated-declarations] 608 | PyEval_AcquireLock(); | ^~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.7m/Python.h:141, from mod_python.c:35: /usr/include/python3.7m/ceval.h:198:18: note: declared here 198 | PyAPI_FUNC(void) PyEval_AcquireLock(void) Py_DEPRECATED(3.2); | ^~~~~~~~~~~~~~~~~~ mod_python.c:645:2: error: 'PyEval_AcquireLock' is deprecated [-Werror=deprecated-declarations] 645 | PyEval_AcquireLock(); | ^~~~~~~~~~~~~~~~~~ In file included from /usr/include/python3.7m/Python.h:141, from mod_python.c:35: /usr/include/python3.7m/ceval.h:198:18: note: declared here 198 | PyAPI_FUNC(void) PyEval_AcquireLock(void) Py_DEPRECATED(3.2); | ^~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[5]: *** [Makefile:738: mod_python_la-mod_python.lo] Error 1 make[5]: Leaving directory '/usr/local/src/freeswitch/src/mod/languages/mod_python' make[4]: *** [Makefile:707: mod_python-all] Error 1 make[4]: Leaving directory '/usr/local/src/freeswitch/src/mod' make[3]: *** [Makefile:608: all-recursive] Error 1 make[3]: Leaving directory '/usr/local/src/freeswitch/src' make[2]: *** [Makefile:3741: all-recursive] Error 1 make[2]: Leaving directory '/usr/local/src/freeswitch' make[1]: *** [Makefile:1448: all] Error 2 make[1]: Leaving directory '/usr/local/src/freeswitch' make: *** [Makefile:4724: current] Error 2 tamer@tux /usr/local/src/freeswitch $

1 0