- FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Presence Issues with Secure Websockets
by Lyle Pratt 01 Jul '15

01 Jul '15

We opened a JIRA issue. Has anyone looked into this? Presence events over WSS are basically broken. https://freeswitch.org/jira/browse/FS-7680 Thanks, Lyle Pratt BetterVoice.com Michael Jerris <mike@...> writes: > > If we are not sending the NOTIFY, please open a jira. Will need to include full sip debug with sofia debug and sip trace turned up. > > On Jun 10, 2015, at 1:11 PM, Thomas Quintana <thomas- 78QPtSbfA2Jofqt5WZNmog(a)public.gmane.org> wrote: > Hey Guys, > > We're subscribing to presence events via SIP.js using a secure websocket (WSS) and we can see the subscriptions being received by FreeSWITCH with a 202 Accepted, but never receive any events via the notify event. Alternatively, when we move to a plain websocket (WS) everything seems to work as expected. > > > > After digging around we found that a few people were experiencing similar issues with FreeSWITCH and additionally with Kamailio http://lists.sip- router.org/pipermail/sr-users/2014-July/084157.html. The issue was resolved with Kamailio by patching the contact header. In an attempt to achieve the same results we have experimented with the settings below but no success. > > > > > <param name="NDLB-force-rport" value="safe"/> > > > <param name="NDLB-received-in-nat-reg-contact" value="true"/> > > > We also have an open ticket with the folks over at SIP.js https://github.com/onsip/SIP.js/issues/184. Any help would be greatly appreciated. > > > > > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@... > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@... > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org

2 1

RFC 4579 and FreeSWITCH
by Rick Block 01 Jul '15

01 Jul '15

A while ago there was a question about using REFER (RFC 4579 section 5.5) to add a new participant to a conference, see http://lists.freeswitch.org/pipermail/freeswitch-users/2012-December/090370… Can someone who is successfully using this post a howto including the relevant config, and exact REFER that works? We're getting a 202 Accepted in response to an out of dialog REFER, but no INVITE is being sent from FreeSWITCH. Our config and REFER are as below. Thanks, Rick Block <extension name="rfc4579_conferences"> <condition field="destination_number" expression="^(conf4579-.+)"> <action application="answer" data="is_conference"/> <action application="conference" data="$1-${domain_name}@cdquality++flags{rfc-4579}"/> </condition> </extension> To: sip:conf4579-1@10.4.0.7;isfocus From: sip:phil@10.4.6.31;tag=329478 Call-ID: 863823 CSeq: 28138 REFER Refer-To: sip:phil@10.4.0.213 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Contact: sip:phil@10.4.6.31 Via: SIP/2.0/UDP HANB65:5060:branch=z9hG4bk457125;rport Content-Length: 0

1 0

no display-update after transfer
by wiebittewas 01 Jul '15

01 Jul '15

when using transfer on the phones, the call will be successfully transfered to the other phone, but it doesn't display the orinal caller-id, but keeps instead that id of the transfering phone. as I can see on the net, the refer-to info from the transfering phone to the server looks good: REFER sip:mod_sofia@192.168.1.1:5060 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.3:5060;branch=z9hG4bK850879522;rport From: <sip:24@192.168.1.3:5060>;tag=27328813 To: "27" <sip:27@pbx.priv>;tag=Net73KDB46X6r Call-ID: 33f2a7ee-9a39-1233-eab8-7674fbcada00 CSeq: 77522256 REFER Contact: <sip:24@192.168.1.3:5060> Max-Forwards: 70 Supported: replaces, path, timer Refer-To: <sip:20@pbx.priv?Replaces=1999853991-5060-136%40BJC.BGI.CBI.EC%3Bto-tag%3DQ0cS79ejyracg%3Bfrom-tag%3D219451532> Referred-By: <sip:24@pbx.priv> Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE, MESSAGE Content-Length: 0 and freeswitch sends an ACCEPTED-msg for this REFER in the freeswitch.log I found entries like: [ALERT] sofia.c:1198 sofia_update_callee_id() sofia/internal/u620@192.168.1.4:5060 Same Callee ID "Outbound Call" <20> which leads to the situation, that no display-update will be send. unfortunately the REFER-handling of freeswitch doesn't seem to offer any possibility to intervene for debugging the available variables, so I have no idea, why freeswitch sees equal callee-ids. any suggestions how to look deeper or how to modifier the variables so that the update will be sent? regards w.

1 2

2 incoming calls on freeswitch with bypass_media
by Jurijs Ivolga 01 Jul '15

01 Jul '15

Hi! I'm not sure that this is right place for this question, but here it is: Is it possible to connect(using uuid_bridge for example) 2 incoming calls on freeswitch and later to trigger re-invite messages, in such way that media will start to go directly between endpoint bypassing freeswitch. I think this is impossible and it is contrary with SIP RFC. Maybe somebody can confirm that this is impossible or not. :) Thank you in advance :)

4 7

Asterisk canreinvite (directmedia) equivalent in freeswitch
by Ričardas Stoma 01 Jul '15

01 Jul '15

Does freeswitch have anything similar to canreinvite (asterisk sip setting)? I know there is bypass_media but it does not work in the same way as canreinvite in asterisk. It looks like bypass_media always tells freeswitch to send media directly between originator and terminator even though they do not have common codecs. I want to use bypass_media only when leg A and leg B have common codecs. If they do not have then freeswitch should stay in media path and handle codec transcoding. Is there an easy way to achieve this in freeswitch?

1 0

FLOSS Weekly featuring FreeSWITCH!
by Ken Rice 01 Jul '15

01 Jul '15

New Post on freeswitch.org from Kathleen check it out at http://ift.tt/1LGHh66 FLOSS Weekly featuring FreeSWITCH! Anthony Minessale and Michael Jerris will be featured on FLOSS Weekly tomorrow to talk about FreeSWITCH! Go check it out!

1 0

External Softphone Best Practices
by Komar, Jason 30 Jun '15

30 Jun '15

I have set up a couple of PBXs using FreeSWITCH over the last few years. I have learned quite a bit, but am certainly no expert. Recently, I installed Bria on my Android cell phone and was using it to make calls over FreeSWITCH throughout our building on our local network wifi. I wanted to be able to make calls from offsite as well, sometimes on wifi and sometimes over cellular data. I setup an external5090 profile as I read on the wiki (didn't see anything in confluence yet). I was able to register through this profile, but outgoing calls from my softphone hit the public context and didn't go any further. The user_context variable is set to default in my directory entry for this user, but that didn't seem to make a difference. I tried two things that worked, but am not sure if they open up any holes that would cause security problems: 1.) If I set the context to default rather than public in the external5090 profile, it works, but I am unsure if this is at all secure. 2.) If I leave the context as public in the external5090 profile and uncomment this section in the public.xml dialplan,  <extension name="check_auth" continue="true"> <condition field="${sip_authorized}" expression="^true$" break="never"> <anti-action application="respond" data="407"/> </condition> </extension> <extension name="transfer_to_default"> <condition> <action application="transfer" data="${destination_number} XML default"/> </condition> </extension> it also works. This one seems the better option, but again, I'm not sure so I am asking the opinion of the experts on the list. I spent several hours searching and reading everything I could find through Google and the mailing list archives, but came up a bit short. Thanks in advance for your help. Jason jkomar(a)jbox.ca

2 2

mod_amqp on RHEL
by Hector Geraldino 30 Jun '15

30 Jun '15

Greetings, I'm trying to build a new FreeSWITCH instance from master, and I have to include the mod_amqp as we'll be relying on RabbitMQ to deliver events. Anyway, this is not working for me on a RHEL 6.2 server due to this error: make[3]: Entering directory `/apps/src/freeswitch-1.4.19/src/mod' making all mod_amqp make[4]: Entering directory `/apps/src/freeswitch-1.4.19/src/mod/event_handlers/mod_amqp' Makefile:772: *** You must install librabbitmq1 and librabbitmq-dev to build this module. Stop. make[4]: Leaving directory `/apps/src/freeswitch-1.4.19/src/mod/event_handlers/mod_amqp' make[3]: *** [mod_amqp-all] Error 1 make[3]: Leaving directory `/apps/src/freeswitch-1.4.19/src/mod' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/apps/src/freeswitch-1.4.19/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/apps/src/freeswitch-1.4.19' make: *** [all] Error 2 The error is pretty obvious: it's missing these two libraries listed there, but thing is that I cannot find those libraries (or any replacement for them) for the Red Hat/Fedora distros. I installled rabbitmq-server, no luck. Tried to install these: http://rpm.pbone.net/index.php3/stat/4/idpl/26206777/dir/redhat_el_6/com/li… http://www.rpmfind.net/linux/rpm2html/search.php?query=librabbitmq-devel(x8… No luck either. It was either I was missing some other dependencies, and then some more, and more, until I couldn't find some of the rpms missing, or the RPMs, after installed, didn't contain the same libs the debian-based pkg seems to have, as the module still didn't compile. Has anyone been able to compile this on a redhat based distro? (fedora,rhel,centos) Thanks all for your time

5 11

bug with latest curl, help with wrapper
by Денис 30 Jun '15

30 Jun '15

Hello. I found a bug ( https://freeswitch.org/jira/browse/FS-7745 ) and last FS version broke our lua hooks. Now we need wrapper for make a json from headers. Has anybody a lua converter headers to json? My knowlegde in lua are poor :(

2 1

Coder Games and Pizza, Register before July 15th and SAVE!
by Brian West 30 Jun '15

30 Jun '15

[image: Description: HDD:Users:anthm:Downloads:ccxx.jpg] *Register Today!* August 3rd – August 6th 2015 877-742-2583 • marketing(a)cluecon.com Register NOW! · $899 Staying at the Hotel · $1199 Staying Elsewhere · First 100 Gino’s PIZZA PARTY *IMPORTANT DATES* *Before July 1st* 5 Raffle Tickets Per Day 1 Gigabit Drink Coupon *July 15th* Conference ticket prices go up. $1299 Staying at the Hotel $1599 Staying Elsewhere *August 3rd* Conference in Session *Contact Us* https://cluecon.com marketing(a)cluecon.com *Coder Games and Pizza, Register before July 15th and SAVE!* Coder Games have been expanded, IPv6 Round Table discussion, Monday August 1st. Visit www.cluecon.com for more info! FreeSWITCH Training Friday we will be hosting a FreeSWITCH training session for anyone interested in learning the basics of FreeSWITCH from a skilled instructor. Call 877-742-2583 for pricing and availability. *Great Speakers, Coder Games, WebRTC And MUCH MORE at ClueCon 2015!* [image: codergames] Be sure to register as soon as possible for the upcoming ClueCon 2015 Developers Conference. Not only will it give you piece of mind, the sooner you register, the more opportunities you will get to win prizes! You’ll also get more drink coupons for the Gigabit Reception Tuesday Night! [image: Description: mac1]The grand prize is a laser engraved commemorative FreeSWITCH 1.6 Edition dual-core 13" Retina MacBook Pro! See the Important Dates Section for Registration details! Stay tuned for more exciting announcements! *Why I Think You MUST COME To ClueCon!* [image: Description: kk]Hi, I’m Kathleen. I’m the FreeSWITCH and ClueCon Social Media Correspondent. I’ve been working hard all year keeping you all up to date on what’s going on with FreeSWITCH. Today I’m here to let you know more about the upcoming ClueCon 2015 Conference! This year we are adding an optional day on Monday with an all-day Hack-A-Thon with great coding contests, game shows and kick-off fun! If you are interested in WebRTC, Voice over IP or Open Source projects like FreeSWITCH, ClueCon is the greatest opportunity you have to gain exposure to the most knowledge and technology in one place. Also, it’s the most fun you can possibly have while still getting a ton of work done! I really look forward to seeing you all there and enjoying the amazing talks, the Epic Annual Kick-Off Pizza Party, The Gigabit Reception and so much more. Make sure you register today so you can reserve your place among the attendees! Be sure to follow us on Facebook and Twitter to get my latest updates in info! [image: Inline image 1] <https://facebook.com/cluecon> [image: Inline image 2] <https://twitter.com/cluecon> [image: Inline image 3] <https://www.youtube.com/watch?v=NLaDpGQuZDA> [image: Inline image 4] <https://www.youtube.com/watch?v=9XXgW34t40s> Unsubscribe: http://lists.freeswitch.org

1 0