- FreeSWITCH-users - FreeSWITCH Mailing Lists

how to register a number using gateway
by amani mansour 28 Mar '16

28 Mar '16

Good morning , I need to configure a test number in a distant freeSWITCH and register it from my freeswitch . i don't need to use a sip phone to register this number . the configuration is done but the registration i don't know how to do it , someone of you tell me to make a gateway but really i don't inderstand how to make it . if some of you can can help me i will be very very happy . thanks , with regards Amani

2 2

Postgress protocols
by Abdul Hakeem 26 Mar '16

26 Mar '16

Hello, I would like to connect FS to Postgress via protocols other than ODBC, can anyone share an idea how to implement this ?. Regards, AH

4 3

Re: [Freeswitch-users] mod_callcenter agent may stuck "In a queue call" forever
by TNTClaus 26 Mar '16

26 Mar '16

Hi. I faced a problem with mod call centre strange behaviour. I have a queue with the strategy "ring all", queue has got 30 agents, all of them always have status available, but only 6 agents can be really active (e.g.: registered and connected) at a time. Those 6 simultaneously answer calls (e.g. can answer 200 on the same INVITE request before CANCEL arrives). *Sometimes an agent might get stuck in the state "In a queue call"* while he is not in a call. In that case waiting agent stops getting calls. CLI command: > *callcenter_config agent set state <agent> waiting* changes state of an agent at DB, but call center still won't offer calls to him. The only fix I found is to reload mod_callcenter, but during reload all active calls would be dropped. Calls are coming one by one (maximum call rate I had ever seen at this site was ~600 calls/hour). But I didn't notice any correlation with the call rate. Agent may get stuck at any time of day with any call rate ranging between ~150 calls/hour to 400 calls/hour. Most of calls last from 5 to 20 seconds. I tried to switch from sqlite to odbc postgresql, but that changed nothing. Currently switch is connected to ODBC Postgresql. *OS version:* Linux local.pbx 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86_64 GNU/Linux *FS version:* FreeSWITCH version: 1.6.6+git~20160111T201612Z~d2d0b3283a~64bit (git d2d0b32 2016-01-11 20:16:12Z 64bit) *sqlite package:* llibsqlite3-0:amd64 3.8.7.1-1+deb8u1 amd64 SQLite 3 shared library *PostgreSQL / ODBC packages:* odbc-postgresql:amd64 1:09.03.0300-1 amd64 ODBC driver for PostgreSQL postgresql-9.4 9.4.6-0+deb8u1 amd64 object-relational SQL database, version 9.4 server *XML configs:* *callcenter/queues/queue.xml:*<queue name="dispatchers"> <param name="discard-abandoned-after" value="300"/> <param name="max-wait-time" value="0"/> <param name="max-wait-time-with-no-agent" value="120"/> <param name="moh-sound" value="$${hold_music}"/> <param name="strategy" value="ring-all"/> <param name="tier-rule-no-agent-no-wait" value="false"/> <param name="tier-rule-wait-multiply-level" value="true"/> <param name="tier-rule-wait-second" value="300"/> <param name="tier-rules-apply" value="false"/> <param name="time-base-score" value="queue"/> </queue> *callcenter/agents/agent.xml* <agent name="agent@local" type="callback" contact="user/agent@local" status="Available" max-no-answer="0" wrap-up-time="1" reject-delay-time="1" busy-delay-time="1" no-answer-delay-time="1"/> that's a typical agent. They are all same except name and contact attributes. *callcenter/tiers/tier.xml* <tier agent="agent@local" queue="dispatchers" level="1" position="1"/>

2 2

Register numbers in freeSWITCH without using sipphone
by amani mansour 25 Mar '16

25 Mar '16

Hi everyone , I would like to configure and register a sip number in freeSWITCH B from freeSWITCH A without using a sipphone . Concerning the configuration i did it .But to register this number i don't know how ? Is there someone who can help me please ???? for example if there is a file in which i can found how to register numbers ? i know that to have the list of registred number in this freeSWITCH ,you can do that : ./fs_cli sofia status profile internal reg . thank you . :) with regards Amani mansour

3 3

outbound_caller_id vs origination_caller_id_number
by Markus Bönke 25 Mar '16

25 Mar '16

In the default configuration, the variable outbound_caller_id is set to 0000000: <X-PRE-PROCESS cmd="set" data="outbound_caller_id=0000000000"/> I understood that this value is used on an originate if when no callerid is set. fs_cli -x 'originate {originate_timeout=20}sofia/gateway/MYGATEWAY/+1111111111 &park' But also changing that value in var.xml does not change the signaled callerid, freeswitch uses also 0000000 as callerid. I think because this value is also hardcoded in switch_types.h as default. If I want to set a callerid on originate, I have to set the variable origination_caller_id_number like: fs_cli -x 'originate {originate_timeout=20}[origination_caller_id_number=022323232323]sofia/gateway/MYGATEWAY/+11111111 &park‘ So what is the idea behind the variable outbound_caller_id which is preset in vars.xml? Thanks Markus

2 1

Configure Freeswitch with two external IPs ...
by evolvingnetworks 25 Mar '16

25 Mar '16

I have a SIP trunk provider that can provide two different services of SIP trunk, but they need two different IPs - is it possible to setup Freeswitch with two external IPs and register one SIP trunk trough one IP and the other through the other IP so calls made out go out the appropriate external IP? -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Configure-Freeswitch-with-two… Sent from the freeswitch-users mailing list archive at Nabble.com.

5 4

Fax transmission success rate fall from 86% to 3% after upgrade from 1.2 to HEAD
by Mateusz Bartczak 24 Mar '16

24 Mar '16

Hi All I have several problem after upgrading legacy system based on FreeSWITCH 1.2x to latest HEAD With no configuration changes and on the same hardware fax transmission success rate fall from 86% to 3% Most calls end up with SpanDSP status/error code 41 Dialplan part I'm using is: <extension name="infax_t38"> <condition field="destination_number" expression="^fax_(.*)$"/> <condition field="${acl(${network_addr} inbound_acl)}" expression="true"> <action application="export" data="nolocal:absolute_codec_string=PCMA,PCMU"/> <action application="set" data="api_hangup_hook=lua /usr/local/FreeswitchFax/rxfax_db.lua ${destination_number} ${uuid}"/> <action application="set" data="fax_ident=${destination_number:4:20}"/> <action application="set" data="fax_header=VirtualFAX"/> <action application="answer"/> <action application="playback" data="silence_stream://2000"/> <action application="set" data="fax_enable_t38=true"/> <action application="set" data="fax_use_ecm=true"/> <action application="set" data="fax_enable_t38_request=true"/> <action application="rxfax" data="/usr/local/freeswitch/var/rxfax/rxfax.${destination_number:4:20}.${uuid}.tiff"/> <action application="hangup"/> </condition> </extension> Any hints on what could cause such dramatic success rate?

5 6

[ERR] switch_xml.c:1715 Error[[error near line 2]:markup outside of root element]
by Aqs Younas 24 Mar '16

24 Mar '16

Hi, I am trying to use mod_xml_curl with fs_curl.But when I try to reload this module I encounter this error. freeswitch> reload mod_xml_curl 2016-03-24 11:13:13.310917 [NOTICE] switch_loadable_module.c:1058 Deleting API Function 'xml_curl' 2016-03-24 11:13:13.310917 [DEBUG] switch_loadable_module.c:1060 Write lock interface 'xml_curl' to wait for existing references. 2016-03-24 11:13:13.310917 [CONSOLE] switch_loadable_module.c:1935 Stopping: mod_xml_curl 2016-03-24 11:13:13.310917 [CONSOLE] switch_loadable_module.c:1955 mod_xml_curl unloaded. 2016-03-24 11:13:13.310917 [INFO] mod_enum.c:880 ENUM Reloaded 2016-03-24 11:13:13.310917 [NOTICE] mod_xml_curl.c:543 Binding [example] XML Fetch Function [http://localhost/fs_curl/index.php] [configuration|directory|dialplan] 2016-03-24 11:13:13.310917 [CONSOLE] switch_loadable_module.c:1465 Successfully Loaded [mod_xml_curl] +OK Reloading XML +OK module unloaded +OK module loaded 2016-03-24 11:13:13.310917 [NOTICE] switch_loadable_module.c:315 Adding API Function 'xml_curl' freeswitch> 2016-03-24 11:13:13.310917 [ERR] switch_xml.c:1715 Error[[error near line 2]: markup outside of root element] 2016-03-24 11:13:13.310917 [INFO] switch_time.c:1411 Timezone reloaded 1781 definitions Any suggestion is much appreciated. Thanks.

1 1

Playback Timeout using mod_shout
by Nishad Musthafa 24 Mar '16

24 Mar '16

Hi, I had a look at this example for local_stream https://wiki.freeswitch.org/wiki/File_string#Timeout_Example where you can add a timeout using the format {timeout=15000}file_string://${sound_dir}/music/8000/music2.wav My question is Is it possible to do this with a shout url. Something like {timeout=15000}shout://..!shout://..!shout://.. If not, what's the best way to achieve the same result? Nishad

1 0

Need to set and get Global vairables from dialplan
by Varsha Agarwal 24 Mar '16

24 Mar '16

Hi, I have created a variable in var.xml, current_node. I am trying to use it in dialplan as below, is this something I can do? <extension name="balance_load"> <condition field="destination_number" expression="^5050$"> <action application="set" data="continue_on_fail=true"/> <action application="set" data="hangup_after_bridge=true"/> <action application="log" data="INFO *********LOG LEVEL******** [${current_node}]"/> <condition field="current_node" expression="^1$"> <action="set_global" data="current_node=2"/> <action application="log" data="INFO *********LOG LEVEL******** [${current_node}]"/> <action application="bridge" data="loopback/5000"/> </condition> <condition field="current_node" expression="^2$"> <action="set_global" data="current_node=2"/> <action application="log" data="INFO *********LOG LEVEL******** [${current_node}]"/> <action application="bridge" data="sofia/external/5000(a)172.18.19.72"/> </condition> <action="set_global" data="current_node=2"/> <action application="log" data="INFO *********LOG LEVEL AFTER******** [${current_node}]"/> <action application="bridge" data="loopback/5000"/> </condition> </extension> Currently log always print current_node = 1 which is the value set in vars.xml. Thanks, Varsha

3 8