- FreeSWITCH-users - FreeSWITCH Mailing Lists

1.4 dialplans on 1.6
by Alex Lake 09 Jun '16

09 Jun '16

Hello.... It's been a while since I've installed Freeswitch. We had just taken the plunge with 1.4 on Ubuntu 12.04! Now I'm wondering if 1.6 on Debian 8 would be compatible with all our dialplans and Lua scripts. Any ideas?

2 2

SIP phone displays b_callee_name and b_callee_num on outgoing calls
by Yu Boot 09 Jun '16

09 Jun '16

Hello. Help me please. When I try to dial from Cisco SPA504G SIP phone via FS, after successful connection I see on screen "Outbound Call" and number@ip, which are values of variables b_callee_name and b_callee_num. I've never seen something like that on any other PBX (Asterisk, Yate, proprietary solutions). How to disable this behavior? It's not only confusing, it prevents me from simple redial lasy dialed number by respective button, as SIP phone tries to dial to that b_callee_num, which is in some different format.

3 3

Group calls without REGISTER users
by Anonim Stefan 09 Jun '16

09 Jun '16

Hi, I'm a Freeswitch newbee and I'm trying to make a group conference call setup: Kamailio sends Group-Users:user1000;ip1000;.. ----------> Freeswitch I've seen that "conference_set_auto_outcall" does what I need, but the users must be registered: "2016-06-09 08:46:52.161319 [ERR] mod_conference.c:1389 Cannot create outgoing channel, cause: USER_NOT_REGISTERED". Without success, I tried setting: -> <user id="1000" cidr="IP1000"> in directory (maybe this should solve it and I'm doing something wrong) -> <param name="disable-register" value="true"/> in sip_profiles I can access the received header values in dialplan and get the user1000 and ip1000. Is there a way I could tell Freeswitch to add user1000 at IP1000 to group conference without needing to register them, just using the given IP? Also, what should I use if I want to keep a local "IP1000<=>x.x.x.x" mapping and avoid sending the actual IP in the Group-Users header? Thank you in advance, Stefan

1 0

Group calls without REGISTER users
by Anonim Stefan 09 Jun '16

09 Jun '16

Hi, I'm a Freeswitch newbee and I'm trying to make a group conference call setup: Kamailio sends Group-Users:user1000;ip1000;.. ----------> Freeswitch I've seen that "conference_set_auto_outcall" does what I need, but the users must be registered: "2016-06-09 08:46:52.161319 [ERR] mod_conference.c:1389 Cannot create outgoing channel, cause: USER_NOT_REGISTERED". Without success, I tried setting: -> <user id="1000" cidr="IP1000"> in directory (maybe this should solve it and I'm doing something wrong) -> <param name="disable-register" value="true"/> in sip_profiles I can access the received header values in dialplan and get the user1000 and ip1000. Is there a way I could tell Freeswitch to add user1000 at IP1000 to group conference without needing to register them, just using the given IP? Also, what should I use if I want to keep a local "IP1000<=>x.x.x.x" mapping and avoid sending the actual IP in the Group-Users header? Thank you in advance, Stefan

1 0

Re- Sending "api <conferencename> hup all" after Lua service script detects local hangup
by Andrew Keil 09 Jun '16

09 Jun '16

To FreeSWITCH Users, I have just come across an issue when my Lua script hangs up while inside a conference (let's call it conference name: "testconf"). I would like to be able to terminate everyone in the conference when this happens, however when I try to call session:execute("conference", "testconf hup all") nothing happens. There is some mention of zombie_exec setting inside the DEBUG logging, however I have no idea where that is and how that is used. If someone has a neat trick to enable this to work I would appreciate it. Kind Regards, Andrew Keil Visytel Pty Ltd

2 3

Check out ClueCon weekly featuring Amandine LePape and Matthew Hodgson from matrix.org
by Anthony Minessale 08 Jun '16

08 Jun '16

Interesting use of FreeSWITCH https://www.youtube.com/watch?v=nF93l0DbAg0 -- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA

1 0

Does mod_rss even work?
by Dave Horton 08 Jun '16

08 Jun '16

I’m trying to get a basic example mod_rss app to work, as per the example in https://wiki.freeswitch.org/wiki/Mod_rss, but running into multiple failures. The current blocking problem is that mod_rss is complaining of ill-formed xml syntax in the downloaded rss document: 2016-06-08 16:21:08.815054 [WARNING] mod_rss.c:414 Error [[error near line 553]: unexpected closing tag </rss>] However, I have inspected the document (the specific document is available at http://www.dansdeals.com/feed) and it is valid syntax, and there is in fact an opening <rss> tag in the document. Before this, I ran into several problems that I had to hack the code to even get the basic menu to play and detect dtmf properly: 1) The Main Menu text was putting in angle brackets into the text for some reason, causing them to get read out as “greater than”. Almost looks like someone thought they were formatting xml ? //switch_snprintf(buf + len, sizeof(buf) - len, "%d: %s. />", idx + 1, feed_names[idx]); 2) The buffer into which dtmf was being collected was not properly zeroed out, so that dtmf entry of ‘1’ got treated as ‘1000’ by mod_rss, causing the session to end. I am running FreeSWITCH Version 1.6.8+git~20160505T153832Z~99de0ad502~64bit (git 99de0ad 2016-05-05 15:38:32Z 64bit) Either I am doing something wrong, or this doesn’t seem to work at all….. Dave

2 1

XML bindings config examples via mod_event_0MQ
by Abdul Hakeem 08 Jun '16

08 Jun '16

Hello, Could anyone point me to xml bindigs config examples via ZeroMQ (similar to mod_xml_curl)?. Cheers, AH

2 1

Slow Memory Leak with FS 1.4.2 ?
by Zoltan Medveczky 08 Jun '16

08 Jun '16

Hi, I'm running FS 1.4.2 on the following environment: OS: RHEL 6.5CPU: x86 64bit quad coreRAM: 12G The process has been up for almost 2 months and seems to be consuming an inordinate amount of memory which is slowly increasing over time: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3404 contactu 39 19 7572m 2.1g 8384 S 0.7 18.3 578:22.95 freeswitch 600 8685 1 0 Apr10 ? 09:49:55 ./freeswitch -nc -conf /opt/freeswitch-1.4.20/conf -log /var/log/8x8/reach-fs-1.2.0 -db /opt/freeswitch-1.4.20/db There has been no traffic handled by this process. Are there any known issues with this version of FS in regards to memory usage? Thanks

3 2

Distributed presence
by Emrah 08 Jun '16

08 Jun '16

Hello list, I have multiple FS servers and I am trying to share presence info across them using a PGSQL database. I cannot share the same hostname and use PGSQL in the core that way for 2 reasons, 1. The DB is on a remote server and there is some latency. It’s ok to update and show presence but not to conduct all operations. Also, if the DB server fails, everything needs to keep on running normally. 2. I need to be able to distinguish channels and calls on a per server basis. Worst case, I could probably forfeit point 1 if FS can keep on running if the DB crashes, if it’s the only way. But I cannot share the same hostnames across all boxes. I already have odbc-dsn configured for my internal profile, as well as: <param name="presence-probe-on-register" value="true"/> <param name="manage-shared-appearance" value="true"/> <param name="dbname" value="sip_presence"/> For dbname, I put the name of a database I saw FS created and which I assumed would match the purpose… But I couldn’t find much documentation about it. Any hints would be appreciated. That particular table (sip_presence) stays empty and presence isn’t shared. Thanks for any help and all the best, Emrah

1 0