- FreeSWITCH-users - FreeSWITCH Mailing Lists

Multiple Registrations or unique SIP credentials for each user device?
by Michael Avers 14 Aug '17

14 Aug '17

Hello, We have customers that currently register their single extension on their desk phone, mobile softphone, as well as desktop softphone - and usually they want them all to ring at the same time, which is easy, we just let them have multiple registrations and it gets the job done. However, some customers are asking to have more fine grained control over which of their devices receive the incoming calls and in what order. For example they may want the desk phone to ring or 10 seconds and only then start ringing the mobile app, and the desktop softphone to never ring (they just use it for outbound dialing). What is the best way to achieve this? I thought about assigning unique credentials to each device they register on. This would be fine if I were to direct inbound calls coming on a DID or via an IVR extension, because I can just ring them as if it was a ring group and control all the needed requirements with the bridge string. However, how do I get this to work for local extension to extension calling? Say their extension should be 3005, but they no longer register it directly and instead are issued credentials for 3005_DESK@domain, 3005_XYZ@domain and so forth. I can have 3005 be a dialplan extension that bridges to them, sure. But then you have presence to deal with, basically when 3005_DESK is on the phone 3005@domain presence should indicate that. Is what I'm asking for possible at all, and if so are there any best practices to get this working properly? Hope I was clear enough :) Thanks Mike

2 4

freeswitch 1.6.19 bizarre fax 488 behavior
by Aqs Younas 13 Aug '17

13 Aug '17

I am facing a bizarre behavior while trying to send fax from zoiper to freeswitch. First, i tried to use the dialplan example as shown in documentation page. <extension name="fax_receive"> <condition field="destination_number" expression="^9978$"> <action application="answer" /> <action application="playback" data="silence_stream://2000"/> <action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/> <action application="rxfax" data="/tmp/FAX-${uuid}.tif"/> <action application="hangup"/> </condition> </extension> But this resulted in "488 Not Acceptable Here" even though i have set fax_enable_t38 in vars.xml Logs. *https://pastebin.freeswitch.org/view/07224882 <https://pastebin.freeswitch.org/view/07224882>* Second, But i remove few lines from dialplan. <extension name="fax_receive"> <condition field="destination_number" expression="^9978$"> <action application="answer" /> <action application="rxfax" data="/tmp/FAX-${uuid}.tif"/> <action application="hangup"/> </condition> </extension> Everything seems to work perfectly. Third. When i insert a small lua script after answer in above dialplan it again fails with 488. <extension name="fax_receive"> <condition field="destination_number" expression="^9978$"> <action application="answer" /> <action application="lua" data="jack.lua"/> <action application="rxfax" data="/tmp/FAX-${uuid}.tif"/> <action application="hangup"/> </condition> </extension> I just want to run a small lua script before i call rxfax application. Any help would be much appreciated. Best Regards. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

External forwarding and CDRs - which method to use?
by NYCPhoneService 13 Aug '17

13 Aug '17

The call flow is: External Number -> internal extension -> Forwarding to external number. When I use loopback channel, the outbound CDR leg is generated with 2 second call as it is known. I can do a post call processing in database and Check if is_loopback=1, match inbound leg by bridge_uuid and calculate the total call length. I'm trying to avoid post call processing. For that, I tried using sip_looped_call in public context. Works well if you change the deflect data to ${sip_to_uri} from the default ${destination_number}. However, all custom variables are lost and first leg is written with BLIND_TRANSFER hangup cause. Billsec is 0 which make sense. If I need to bill on inbound leg, what should I do in this case? Any suggestions are appreciated.

1 0

spanish sounds freeswitch-sounds-es-ES-cristina
by Anatoli 13 Aug '17

13 Aug '17

Hi all, Could you please let me know if you have the freeswitch-sounds-es-ES-cristina sounds pack for Spanish? It was once available at http://www.wirelessmundi.com/freeswitch-sounds-es-ES-cristina-48000-1.0.15.… and used by Gentoo. I know there's http://files.freeswitch.org/freeswitch-sounds-es-mx-maria-44100.tar.gz, but this pack lacks some files like conference/conf-has_joined.wav and others. I thought that maybe the other pack (es-ES-cristina) has these files so I could combine them in a single complete Spanish language pack. Thanks, Anatoli

1 0

IP based authentication for end user and route call to gateway
by Uday kumar 12 Aug '17

12 Aug '17

Hello All, I have one Freeswitch 1.6 server installed on CentOS 7.2 64-Bit. I configured one gateway to make outbound calls and one extension. Registered that extension on softphone dialed a number. Its working. Extension => Freeswitch => Gateway => Mobile =======Working After that registered same extension on an Asterisk server and from Asterisk dialed a number and then also working. Asterisk(with username/password) => Freeswitch => Gateway => Mobile ========Working. Now I am trying to remove registration from Asterisk and send directly call to Freeswtich and on Freeswitch check if that IP is allowed then allow IP to make call. I added Asterisk IP in Domain ACL on Freeswitch but when call called from Asterisk, its going in Public context and considered as a incoming calls. How I can add IP based authentication for end user and route call to configured gateway? -- Thanks & Regard Uday. Mobile:- +91-9377579349

2 2

Forward fails with deflect and REFER to null
by Mario G 12 Aug '17

12 Aug '17

What are the bold deflect and refer to lines below telling me? This worked until last year, not sure if it’s related to 1.6, I can’t nail down a start date. A ring group rings. When one phone’s FWD button is pressed prior to a call or during a call the call is forwarded to VM extension 2921, and the other phones stopped ringing. This no longer works, the set phone does not ring, the call is not transferred to VM and the other phones keep ringing. I couldn’t find anything on the wiki (it only described using codes to turn FWD on/off), etc. to explain why this stopped working. Any help to get the phone forwarding working again is greatly appreciated. Thanks! Mario G YEALINK T48G DSS button is set to forward to 2921, pressing again turns it off. All other DSS keys such as call park, etc work fine. <extension name="vmonly"> <condition field="destination_number" expression="^2921$">  <action application="lua" data="/usr/local/FreeSwitch-scripts/known-people.lua CALLIN"/> <action application="answer"/> <action application="playback" data="${lua_vmmsg}"/>  <action application="set" data="skip_greeting=true"/> <action application="voicemail" data="default ${domain_name} 100"/> </condition> </extension> This log shows the only lines that contain 2921 in bold: 2016-11-19 16:27:26.673609 [INFO] mod_dialplan_xml.c:637 Processing Mario G <15051234567>->2921 in context public Dialplan: sofia/internal/15051234567(a)11.123.1.10 parsing [public->unloop] continue=false Dialplan: sofia/internal/15051234567(a)11.123.1.10 Regex (PASS) [unloop] ${unroll_loops}(true) =~ /^true$/ break=on-false Dialplan: sofia/internal/15051234567(a)11.123.1.10 Regex (PASS) [unloop] ${sip_looped_call}(true) =~ /^true$/ break=on-false Dialplan: sofia/internal/15051234567(a)11.123.1.10 Action deflect(${destination_number}) 2016-11-19 16:27:26.673609 [DEBUG] switch_core_state_machine.c:286 (sofia/internal/15051234567(a)11.123.1.10) State Change CS_ROUTING -> CS_EXECUTE 2016-11-19 16:27:26.673609 [DEBUG] switch_core_state_machine.c:643 (sofia/internal/15051234567(a)11.123.1.10) State ROUTING going to sleep 2016-11-19 16:27:26.673609 [DEBUG] switch_core_state_machine.c:584 (sofia/internal/15051234567(a)11.123.1.10) Running State Change CS_EXECUTE 2016-11-19 16:27:26.673609 [DEBUG] switch_core_state_machine.c:650 (sofia/internal/15051234567(a)11.123.1.10) State EXECUTE 2016-11-19 16:27:26.673609 [DEBUG] mod_sofia.c:198 sofia/internal/15051234567(a)11.123.1.10 SOFIA EXECUTE 2016-11-19 16:27:26.673609 [DEBUG] switch_core_state_machine.c:328 sofia/internal/15051234567(a)11.123.1.10 Standard EXECUTE EXECUTE sofia/internal/15051234567(a)11.123.1.10 deflect(2921) 2016-11-19 16:27:26.673609 [DEBUG] sofia.c:8349 Process REFER to [(null)@2921]

3 11

Connection timed out while trying to install FS
by Danny Dias 12 Aug '17

12 Aug '17

Hi guys, I'm having an issue while installing FS: root@srv-lx-fs-01:~# wget -O - https://files.freeswitch.org/ > repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - echo "deb > http://files.freeswitch.org/repo/deb/freeswitch-1.6/ jessie main" > > /etc/apt/sources.list.d/freeswitch.list > --2017-08-11 00:27:24-- https://files.freeswitch.org/ > repo/deb/debian/freeswitch_archive_g0.pub > Resolving files.freeswitch.org (files.freeswitch.org) 146.112.239.208, > 146.112.239.206, 146.112.239.209, ... > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.208|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.206|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.209|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.205|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.207|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|146.112.239.211|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|::ffff:146.112.239.208|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|::ffff:146.112.239.205|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|::ffff:146.112.239.206|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|::ffff:146.112.239.207|:443... > failed: Connection timed out. > Connecting to files.freeswitch.org (files.freeswitch.org)|::ffff:146.112.239.209|:443... > ^C > gpg: Interrupt caught ... exiting Any ideas? Could this be a firewall issue? From a packet capture, i only see traffic from the FS VM to files.freeswitch.org, but nothing coming back: > root@srv-lx-fs-01:~# tcpdump -n host files.freeswitch.org > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes > 00:55:41.898284 IP 10.201.238.146.47705 > 146.112.239.207.443: Flags [S], > seq 706570257, win 29200, options [mss 1460,sackOK,TS val 5189242 ecr > 0,nop,wscale 7], length 0 > 00:55:42.895572 IP 10.201.238.146.47705 > 146.112.239.207.443: Flags [S], > seq 706570257, win 29200, options [mss 1460,sackOK,TS val 5189492 ecr > 0,nop,wscale 7], length 0 > 00:55:44.899553 IP 10.201.238.146.47705 > 146.112.239.207.443: Flags [S], > seq 706570257, win 29200, options [mss 1460,sackOK,TS val 5189993 ecr > 0,nop,wscale 7], length 0 > 00:55:48.911570 IP 10.201.238.146.47705 > 146.112.239.207.443: Flags [S], > seq 706570257, win 29200, options [mss 1460,sackOK,TS val 5190996 ecr > 0,nop,wscale 7], length 0

3 2

Re: [Freeswitch-users] FreeSWITCH-users Digest, Vol 134, Issue 77
by Raviram Chandran 12 Aug '17

12 Aug '17

Hey, We are unable to registered the mobile client from our IP that is hosted AWS. 2017-08-12 05:16:07.213370 [WARNING] sofia_reg.c:2906 Can't find user [8001(a)34.***.***.***] from 122.***.***.*** You must define a domain called '34.***.***.***' in your directory and add a user with the id="8001" attributeand you must configure your device to use the proper domain in it's authentication credentials.2017-08-12 05:16:07.213370 [WARNING] sofia_reg.c:1737 SIP auth failure (REGISTER) on sofia profile 'internal' for [8001(a)34.***.***.***] from ip 122.***.***.*** On Sat, Aug 12, 2017 at 3:28 PM, < freeswitch-users-request(a)lists.freeswitch.org> wrote: > Send FreeSWITCH-users mailing list submissions to > freeswitch-users(a)lists.freeswitch.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > or, via email, send a message with subject or body 'help' to > freeswitch-users-request(a)lists.freeswitch.org > > You can reach the person managing the list at > freeswitch-users-owner(a)lists.freeswitch.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of FreeSWITCH-users digest..." > > Today's Topics: > > 1. Re: rad_auth failing under load (Sergey Safarov) > > > ---------- Forwarded message ---------- > From: Sergey Safarov <s.safarov(a)gmail.com> > To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Cc: > Bcc: > Date: Sat, 12 Aug 2017 09:58:10 +0000 > Subject: Re: [Freeswitch-users] rad_auth failing under load > My bad in v1.6 branch downloaded 1.1.6 > https://freeswitch.org/stash/projects/FS/repos/freeswitch/ > browse/debian/util.sh?at=refs%2Fheads%2Fv1.6#106 > > > сб, 12 авг. 2017 г. в 12:39, Sergey Safarov <s.safarov(a)gmail.com>: > >> Yes, think need also for branch v1.6 too >> >> https://freeswitch.org/stash/projects/FS/repos/freeswitch/ >> browse/src/mod/xml_int/mod_xml_radius/Makefile.am?at= >> refs%2Fheads%2Fv1.6#4 >> https://freeswitch.org/stash/projects/FS/repos/freeswitch/ >> browse/src/mod/applications/mod_rad_auth/Makefile.am?at=v1.6#4 >> >> >> >> пт, 11 авг. 2017 г. в 15:16, Joseph Waite <joelists(a)tm.net.uk>: >> >>> The changes are already there in Master branch which already uses 1.1.7 >>> >>> Stable branch is still on 1.1.6 so needs to be manually changed. >>> >>> Is it worth raising a pull request for Stable? Is that even an option? >>> >>> Regards >>> >>> On 11 Aug 2017, at 07:16, Sergey Safarov <s.safarov(a)gmail.com> wrote: >>> >>> Please create pull request >>> >>> вт, 8 авг. 2017 г., 22:47 Joseph Waite <joelists(a)tm.net.uk>: >>> >>>> Hi >>>> >>>> Yes that was the issue. It works great now! >>>> >>>> Regards >>>> >>>> On 8 Aug 2017, at 20:38, Juan Pablo Godoy Macari <jpgodoy(a)redvoiss.net> >>>> wrote: >>>> >>>> That's the problem...I modified the files "Makefile" in the module's >>>> folder to use the version 1.1.7 of freeradius-client. >>>> >>>> Regards. >>>> >>>> 2017-08-08 15:30 GMT-04:00 Joseph Waite <joelists(a)tm.net.uk>: >>>> >>>>> Hi >>>>> >>>>> I am using both, I need to do authentication from within the dial plan >>>>> for IP authenticated users, so I use mod_rad_auth for this and >>>>> mod_xml_radius for user auth and accounting. >>>>> >>>>> I think I have found the issue, Freeswitch actually downloads free >>>>> radius client and in the stable branch the makefiles for both modules >>>>> specifies 1.1.6 so changed to 1.1.7 and recompiling everything. >>>>> >>>>> Will update if this solves the issues. >>>>> >>>>> Regards >>>>> >>>>> On 8 Aug 2017, at 20:21, Juan Pablo Godoy Macari <jpgodoy(a)redvoiss.net> >>>>> wrote: >>>>> >>>>> Actually, I'm not using radauth module. I use mod_xml_radius instead, >>>>> it's newer and you have accounting support too. The implementation it's >>>>> similar compared to radauth module. >>>>> >>>>> Regards, >>>>> Juan Pablo Godoy. >>>>> >>>>> 2017-08-08 14:40 GMT-04:00 Joseph Waite <joelists(a)tm.net.uk>: >>>>> >>>>>> Hi >>>>>> >>>>>> I have done a fresh install and used freeradius-client 1.1.7 but >>>>>> still have this issue, Did you have to make any config changes to free >>>>>> radius client? >>>>>> >>>>>> Regards >>>>>> >>>>>> On 8 Aug 2017, at 16:38, Juan Pablo Godoy Macari < >>>>>> jpgodoy(a)redvoiss.net> wrote: >>>>>> >>>>>> Hello, >>>>>> >>>>>> I had the same problem. Compile the radius module with >>>>>> freeradius-client 1.1.7 >>>>>> >>>>>> Regards, >>>>>> Juan Pablo Godoy. >>>>>> >>>>>> 2017-08-07 18:55 GMT-04:00 Joseph Waite <joelists(a)tm.net.uk>: >>>>>> >>>>>>> Hi Guys >>>>>>> >>>>>>> I am having a strange issue, when I have more than about 450 >>>>>>> concurrent calls, rad_auth seems to fail to authorise calls. >>>>>>> >>>>>>> I see the Radius request received and replied with RAD-ACCEPT from >>>>>>> the Radius server but I get the following error >>>>>>> >>>>>>> 2017-08-07 18:29:53.202133 [ERR] mod_rad_auth.c:504 RADIUS >>>>>>> Authentication failure (RC=1) >>>>>>> 2017-08-07 18:29:53.202133 [ERR] mod_rad_auth.c:702 An error occured >>>>>>> during radius authorization. >>>>>>> >>>>>>> I have had a look as ulimit and seems to be fine. >>>>>>> >>>>>>> core file size (blocks, -c) 0 >>>>>>> data seg size (kbytes, -d) unlimited >>>>>>> scheduling priority (-e) 0 >>>>>>> file size (blocks, -f) unlimited >>>>>>> pending signals (-i) 128716 >>>>>>> max locked memory (kbytes, -l) 64 >>>>>>> max memory size (kbytes, -m) unlimited >>>>>>> open files (-n) 65536 >>>>>>> pipe size (512 bytes, -p) 8 >>>>>>> POSIX message queues (bytes, -q) 819200 >>>>>>> real-time priority (-r) 0 >>>>>>> stack size (kbytes, -s) 8192 >>>>>>> cpu time (seconds, -t) unlimited >>>>>>> max user processes (-u) 128716 >>>>>>> virtual memory (kbytes, -v) unlimited >>>>>>> file locks (-x) unlimited >>>>>>> >>>>>>> Anyone have any ideas? >>>>>>> >>>>>>> Regards >>>>>>> >>>>>>> ____________________________________________________________ >>>>>>> _____________ >>>>>>> Professional FreeSWITCH Consulting Services: >>>>>>> consulting(a)freeswitch.org >>>>>>> http://www.freeswitchsolutions.com >>>>>>> >>>>>>> Official FreeSWITCH Sites >>>>>>> http://www.freeswitch.org >>>>>>> http://confluence.freeswitch.org >>>>>>> http://www.cluecon.com >>>>>>> >>>>>>> FreeSWITCH-users mailing list >>>>>>> FreeSWITCH-users(a)lists.freeswitch.org >>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>>>>> options/freeswitch-users >>>>>>> http://www.freeswitch.org >>>>>>> >>>>>> >>>>>> ____________________________________________________________ >>>>>> _____________ >>>>>> Professional FreeSWITCH Consulting Services: >>>>>> consulting(a)freeswitch.org >>>>>> http://www.freeswitchsolutions.com >>>>>> >>>>>> Official FreeSWITCH Sites >>>>>> http://www.freeswitch.org >>>>>> http://confluence.freeswitch.org >>>>>> http://www.cluecon.com >>>>>> >>>>>> FreeSWITCH-users mailing list >>>>>> FreeSWITCH-users(a)lists.freeswitch.org >>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>>>> options/freeswitch-users >>>>>> http://www.freeswitch.org >>>>>> >>>>>> >>>>>> >>>>>> ____________________________________________________________ >>>>>> _____________ >>>>>> Professional FreeSWITCH Consulting Services: >>>>>> consulting(a)freeswitch.org >>>>>> http://www.freeswitchsolutions.com >>>>>> >>>>>> Official FreeSWITCH Sites >>>>>> http://www.freeswitch.org >>>>>> http://confluence.freeswitch.org >>>>>> http://www.cluecon.com >>>>>> >>>>>> FreeSWITCH-users mailing list >>>>>> FreeSWITCH-users(a)lists.freeswitch.org >>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>>>> options/freeswitch-users >>>>>> http://www.freeswitch.org >>>>>> >>>>> >>>>> ____________________________________________________________ >>>>> _____________ >>>>> Professional FreeSWITCH Consulting Services: >>>>> consulting(a)freeswitch.org >>>>> http://www.freeswitchsolutions.com >>>>> >>>>> Official FreeSWITCH Sites >>>>> http://www.freeswitch.org >>>>> http://confluence.freeswitch.org >>>>> http://www.cluecon.com >>>>> >>>>> FreeSWITCH-users mailing list >>>>> FreeSWITCH-users(a)lists.freeswitch.org >>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>>> options/freeswitch-users >>>>> http://www.freeswitch.org >>>>> >>>>> >>>>> >>>>> ____________________________________________________________ >>>>> _____________ >>>>> Professional FreeSWITCH Consulting Services: >>>>> consulting(a)freeswitch.org >>>>> http://www.freeswitchsolutions.com >>>>> >>>>> Official FreeSWITCH Sites >>>>> http://www.freeswitch.org >>>>> http://confluence.freeswitch.org >>>>> http://www.cluecon.com >>>>> >>>>> FreeSWITCH-users mailing list >>>>> FreeSWITCH-users(a)lists.freeswitch.org >>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>>> options/freeswitch-users >>>>> http://www.freeswitch.org >>>>> >>>> >>>> ____________________________________________________________ >>>> _____________ >>>> Professional FreeSWITCH Consulting Services: >>>> consulting(a)freeswitch.org >>>> http://www.freeswitchsolutions.com >>>> >>>> Official FreeSWITCH Sites >>>> http://www.freeswitch.org >>>> http://confluence.freeswitch.org >>>> http://www.cluecon.com >>>> >>>> FreeSWITCH-users mailing list >>>> FreeSWITCH-users(a)lists.freeswitch.org >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>> options/freeswitch-users >>>> http://www.freeswitch.org >>>> >>>> >>>> ____________________________________________________________ >>>> _____________ >>>> Professional FreeSWITCH Consulting Services: >>>> consulting(a)freeswitch.org >>>> http://www.freeswitchsolutions.com >>>> >>>> Official FreeSWITCH Sites >>>> http://www.freeswitch.org >>>> http://confluence.freeswitch.org >>>> http://www.cluecon.com >>>> >>>> FreeSWITCH-users mailing list >>>> FreeSWITCH-users(a)lists.freeswitch.org >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ >>>> options/freeswitch-users >>>> http://www.freeswitch.org >>> >>> ____________________________________________________________ >>> _____________ >>> Professional FreeSWITCH Consulting Services: >>> consulting(a)freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://confluence.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >>> >>> ____________________________________________________________ >>> _____________ >>> Professional FreeSWITCH Consulting Services: >>> consulting(a)freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://confluence.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

1 0

Mod_callcenter and xml_curl
by Gregor Nanger 12 Aug '17

12 Aug '17

Can you please advise me on something. We are using FS as multitenant and feeding everything via mod_curl. I am wondering what happens if Mod_callcenter configuration is feed via xml_curl. I mean if one customer updates configuration and module is reloaded, what happens with live calls of other customers? Best regards, Gregor -- Gregor Nanger *CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si

5 11

ClueCon Slides: Industrial Grade FreeSWITCH, Scaling, Balancing, High Availability, SIP, WebRTC
by Giovanni Maruzzelli 11 Aug '17

11 Aug '17

*Industrial Grade FreeSWITCH Scaling, Balancing and High Availability for SIP and WebRTC* Scaling your FreeSWITCH platform to serve a growing user base is a critical challenge. We'll go through the best techniques, practices, and implementations for Voice and Video Calls, Conferencing, WebRTC, SIP, Chatting, Presence and Instant Messaging Slides can be downloaded from http://opentelecom.it/cluecon2017.pdf Enjoy ClueCon! -giovanni -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18

3 2