- FreeSWITCH-users - FreeSWITCH Mailing Lists

My fs_cli stopped working, can you help me please?
by Milena 24 Jan '09

24 Jan '09

Hi, thanks for the reply, I tried it both with fs down and it didn't work, also when it was turned on, no results either. Any other ideas please? i really wanna fix it without having to start from zero. thank you very much On the Freeswitch console i keep getting the message: 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1791 listener_run() Connection Open from 127.0.0.1:54741 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1914 listener_run() Session complete, waiting for children 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1938 listener_run() Connection Closed This is what i did in the other console: -bash-3.2# cd /usr/src/freeswitch-1.0.2/libs/esl/ -bash-3.2# make clean rm -f *.o src/*.o testclient testserver fs_cli libesl.a *~ src/*~ src/include/*~ -bash-3.2# make cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl.c -o src/esl.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_event.c -o src/esl_event.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_threadmutex.c -o src/esl_threadmutex.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_config.c -o src/esl_config.o ar rcs libesl.a src/esl.o src/esl_event.o src/esl_threadmutex.o src/esl_config.o ranlib libesl.a cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes fs_cli.c -o fs_cli -L. -L../../libs/libedit/src/.libs -lncurses -lpthread -lesl -ledit cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes testclient.c -o testclient -L. -lncurses -lpthread -lesl cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes testserver.c -o testserver -L. -lncurses -lpthread -lesl -bash-3.2# ./fs_cli -bash-3.2#

2 1

Auto dialing ...
by Shelby Ramsey 24 Jan '09

24 Jan '09

OK ... Here goes another I'm doing this with AST ... but I want to move it to FS. Searched via google site:lists.freeswitch.org auto dialer and others ... nothing useful. Today I have a platform for auto dialing with AST (centrally managed ... about 10 machines) and we do this: -- Remote machines query central DB for numbers to call based on certain configs -- Use AMI to generate the call -- If call gets answered, extension info queried via rta (central db again) The nice thing about all of this is it's relatively easy to manage (through one central web interface we built) and it works ... the bad part is reporting ... as anyone knows on this list that has used AST for auto dialing in this way (via .call or AMI) every call looks like it fails instead of showing a real cause code. So ... conceptually I'm trying to accomplish the same thing ... Today we use FS a lot for termination of VoIP traffic ... all done via XML_CURL ... which is awesome! Would like to do something like: -- originate request -- on answer XML_CURL posts info

6 6

Re: [Freeswitch-users] My fs_cli stopped working, can you help me please?
by Milena 24 Jan '09

24 Jan '09

Well, telnet works, what else could it be? another thing i remember doing before the fs_cli stopped working was installing TCAPI and getting it to work, but i didn't change any config files or anything other than what it says in the instalation instructions; I don't mind so much about replicating the issue and figuring out how did it get damaged, what I really want to know now is how to make it work again cause even reconfiguring/installing fs doesn't fix it and the truth is, the fs_cli is comfortable; any idea on how to fix it other than starting a fresh install of fs from a new os instalation? Thank you! My telnet output: -bash-3.2# telnet localhost 8021 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. Content-Type: auth/request auth <my password> Content-Type: command/reply Reply-Text: +OK accepted exit Content-Type: command/reply Reply-Text: +OK bye Content-Type: text/disconnect-notice Content-Length: 70 Disconnected, goodbye! See you at ClueCon http://www.cluecon.com/ !!! Connection closed by foreign host. ------- *Michael Collins wrote:* just for kicks, can you try a raw telnet session, just to make sure the the event socket is working properly? telnet localhost 8021 auth ClueCon (press enter twice) If you get something like this: h-3.2# telnet localhost 8021 Trying ::1... telnet: connect to address ::1: Connection refused Trying fe80::1... telnet: connect to address fe80::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Content-Type: auth/request auth ClueCon Content-Type: command/reply Reply-Text: +OK accepted Then the event socket stuff is working. To exit out, type "exit" then enter twice. Let us know what happens. -MC On Fri, Jan 23, 2009 at 2:14 PM, Milena <testeador01 at gmail.com <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>> wrote: >* *>* I use the stable version of fs 1.0.2 testing out different options of *>* configuration; *>* Last thing I was doing was trying to fix some issues with dingaling-google *>* talk cause i hear no audio at all from an external ip, and i still didnt get *>* it to work; *>* *>* so i tried deleting the sofia_* files on the folder db/ as suggested on *>* another thread about nat related issues (oops?), and then restarting fs. *>* After this, trying to execute bin/fs_cli doesn't work anymore; it tries to *>* connect cause i get the output on the box: *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1791 listener_run() *>* Connection Open from 127.0.0.1:33055 *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1914 listener_run() Session *>* complete, waiting for children *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1938 listener_run() *>* Connection Closed *>* *>* but on the console where im trying to run the cli nothing happens, *>* I tried rebooting the machine; i tried with freeswitch make current, it *>* didn't fix it; i tried all the way from configure to make and make install *>* and it didn't fix my problem either. *>* *>* What should i run or change on the configurations to fix this? *>* *>* Thank you very much. *>* *>* _______________________________________________ *>* Freeswitch-users mailing list *>* Freeswitch-users at lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> *>* http://lists.freeswitch.org/mailman/listinfo/freeswitch-users *>* UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users *>* http://www.freeswitch.org *>* *>* *

2 1

How to bridge without Answer?
by shehzad p 24 Jan '09

24 Jan '09

Hi all, When I dial a number from Originator Gateway, It will route to Freeswitch Server and then FS will bridge the call to Terminator Gateway as below. Terminator Answer the call (and runs playback, and look for DTMF). |Originator Gateway|---------------> |FreeSwitch |------------------> |Terminator Gateway| I used bridge application to route call to Terminator. But my requirement is that when Terminator answer the call (Respnd with 200OK) , Freeswitch should NOT Answer call for A leg (Originater Gateway). How can be this done? Thanks in advance. msp. -- View this message in context: http://www.nabble.com/How-to-bridge-without-Answer--tp21583334p21583334.html Sent from the Freeswitch-users mailing list archive at Nabble.com.

3 6

Freeswitch latest revision ODBC crashed
by Laurent Fabre 24 Jan '09

24 Jan '09

Hi, I'm experiencing a few « random » segfaults ever since I enabled core ODBC support. They usually happen during startup or quickly after...or not at all as long as I do not restart freeswitch. The backend is a postgresql 7.4, every module has a distinct database (LATIN9, with OIDS). I'm having a few issues with presence & call routing which tend to break from time to time. The freeswitch box is hosted and I've got several phones with STUN enabled behind a NAT firewall (namely pfSense). I'm not sure how those things might relate but maybe it's worth mentionning. I've decided to update a few hours ago but still crashing. I was about to test mod_easyroute when I decided to run gdb and look into it : http://pastebin.freeswitch.org/6830 Could someone please help me pointing the issue? :) Thanks in advance, -- Laurent FABRE Directeur général 10, rue d'Aumale 75009 Paris Tel: +33.(0)1.42.81.28.20<sip:+33142812820> Mob: +33.(0)6.75.75.02.96<sip:+33675750296> Fax: +33.(0)1.70.24.74.61<+33170247461> laurent.fabre(a)kirranet.com

6 11

api_hangup_hook not actually executing the command
by Scott Ellis 24 Jan '09

24 Jan '09

The on answer is fine, the api_hangup_hook gets to the point where it wants to execute, but then nothing happens. Any thoughts? 2009-01-21 03:08:00 [DEBUG] switch_channel.c:1773 switch_channel_perform_mark_answered() sofia/internal/Line_9(a)10.0.0.9 execute on answer: set_global(10.0.0.19_INCALL=true)2009-01-21 03:08:00 [DEBUG] mod_dptools.c:726 set_global_function() SET GLOBAL [10.0.0.19_INCALL]=[true] 2009-01-21 03:08:09 [DEBUG] switch_core_state_machine.c:416 switch_core_session_run() Hangup Command set_global(10.0.0.19_INCALL=false): It does not execute - the global variable is not set...quite odd. Scott

4 6

Wideband/Ultrawideband Conference
by Brian West 24 Jan '09

24 Jan '09

FreeSWITCHers, We have set the 888(a)conference.freeswitch.org conference to be 32k, This weekend I'm going to move it to be 48k by default. So dust off your Logitech 350 headsets ( or go buy one from your favorite retailer ). The 350 has the 16kHz pickup and the 20kHz output required to take the most advantage of the 48k CELT codec. So check it out... btw we hangout in the conference all day on Fridays so if you want to call in, ask questions or just interact with the developers of FreeSWITCH... Stop by ... say Hi... Thanks, /b PS: Don't forget to tell a friend about FreeSWITCH!

2 2

bgapi uuid_kill question
by pauld 24 Jan '09

24 Jan '09

Hi, Trying to kill a channel (hangup) when it's in CHANNEL_EXECUTE state as per mod_socket_event event information I use bgapi uuid_kill <core_uuid> - but get response "ERR no such channel!". Same happens if I use unique_id or channel_name as an argument to uuid_kill. What I am doing wrong? Help would much appreciated. Thx.

3 4

My fs_cli stopped working, can you help me please?
by Milena 23 Jan '09

23 Jan '09

I use the stable version of fs 1.0.2 testing out different options of configuration; Last thing I was doing was trying to fix some issues with dingaling-google talk cause i hear no audio at all from an external ip, and i still didnt get it to work; so i tried deleting the sofia_* files on the folder db/ as suggested on another thread about nat related issues (oops?), and then restarting fs. After this, trying to execute bin/fs_cli doesn't work anymore; it tries to connect cause i get the output on the box: 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1791 listener_run() Connection Open from 127.0.0.1:33055 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1914 listener_run() Session complete, waiting for children 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1938 listener_run() Connection Closed but on the console where im trying to run the cli nothing happens, I tried rebooting the machine; i tried with freeswitch make current, it didn't fix it; i tried all the way from configure to make and make install and it didn't fix my problem either. What should i run or change on the configurations to fix this? Thank you very much.

2 1

Gateway Params
by Laurent Fabre 23 Jan '09

23 Jan '09

Hi, Can I enclose the params of the directory gateway element in <params></params> ? I mean I sure can but is the parser going to choke on it or not ? Thanks in advance, -- Laurent FABRE Directeur général 10, rue d'Aumale 75009 Paris Tel: +33.(0)1.42.81.28.20<sip:+33142812820> Mob: +33.(0)6.75.75.02.96<sip:+33675750296> Fax: +33.(0)1.70.24.74.61<+33170247461> laurent.fabre(a)kirranet.com

3 4