- FreeSWITCH-users - FreeSWITCH Mailing Lists

LDAP Integration
by Vinicius Kobashi 02 Feb '09

02 Feb '09

7 16

Outbound Proxy configuration
by Boris Lansky 02 Feb '09

02 Feb '09

What way should I configure Freeswitch to get out all the outbound calls through a specific proxy server? Regards, Boris Lansky Unified Communications Telephony Team AT&T Unified Communications Phone: +972.3.976.7604 Fax: +972.3.976.7712 blansky(a)interwise.com <mailto:Simon.shaw@att.com>

5 9

Cisco 7975G and XML options for G722
by Brian West 01 Feb '09

01 Feb '09

I'm digging for the option in the XML to enable G722 on the 7975G, It says "Enterprise Advertise G.722, Disabled", "Device Advertise G.722, Use System Default" So what options to turn G722 on? Anyone? Anyone? Thanks, /b

4 6

TDM400 FXO can dialout only once
by Nandy Dagondon 01 Feb '09

01 Feb '09

hi everybody, i installed FS 1.0.2 to an Atom mobo (Intel D945GCLF2). it's working using IP phones, softphones and digium FXS port. but there's a problem in dialing out to PSTN using digium tdm400 fxo - it works fine on the first attempt (after starting FS) but it fails on the subsequent attempts. i tested to call using the FXS port and IP phone. same problem. before i place any call, i checked >oz dump 2 1 (show current state = DOWN, last state = DOWN) in the first call, there's this message: [WARNING] mod_openzap.c:1196 on_fxo_signal() Unhandled type for channel 2:1 but then i hangup. checked >oz dump 21 (show current state=DOWN, last state=HANGUP) in the 2nd (and subsequent) attempts, the fxo just goes off-hook but doesn't send the dtmf tones. >oz dump 2 1 (shows current state = DIALING, last state = DOWN) has anyone encountered this problem before? i appreciate for any help to correct this problem. tks, nandy Environment: ================== kernel 2.6.18-92.1.22.el5 FS 1.0.2 zaptel 1.4.11 oslec digium TDM400P Rev. I (1-FXS, 2-FXO,3-4 vacant) zaptel.conf ======== loadzone = us defaultzone=us channels=1-2 alaw=1-4 fxsks=2 fxoks=1 openzap.conf.xml: =============== <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/>    </settings>  <analog_spans> <span id="1">    <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="15"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="false"/>     </span> <span id="2">    <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value=""false/>     </span> </analog_spans> </configuration> openzap.conf ========== [span zt] name => OpenZAP FXS number => 1 fxs-channel => 1 [span zt] name => OpenZAP FXO number => 2 fxo-channel => 2 tones.conf (the dialtone and ring tone is set to Philipping tones) ======== [us] generate-dial => v=-7;%(1000,0,425) detect-dial => 425 generate-ring => v=-7;%(1000,4000,425,480) detect-ring => 425,480 generate-busy => v=-7;%(500,500,480,620) detect-busy => 480,620 generate-attn => v=0;%(200,300,1400,1800) detect-attn => 1400,1800 generate-callwaiting-sas => v=0;%(300,10000,440) detect-callwaiting-sas => 440 generate-callwaiting-cas => v=0;%(80,0,2750,2130) detect-callwaiting-cas => 2750,2130 detect-fail1 => 913.8 detect-fail2 => 1370.6 detect-fail3 => 776.7 LOG OF FIRST CALL (OK) ==================== 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:152 switch_core_standard_on_execute() OpenZAP/1:1/93400534 Execute bridge(openzap/2/1/3400534) 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:340 tech_init() Set codec PCMU 20ms 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:1017 channel_outgoing_channel() Connect outbound channel OpenZAP/2:1/3400534 2009-01-25 10:35:58 [NOTICE] switch_channel.c:565 switch_channel_set_name() New Channel OpenZAP/2:1/3400534 [e5f12114-ea88-11dd-9f5c-290fb4a527a4] 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:1026 channel_outgoing_channel() (OpenZAP/2:1/3400534) State Change CS_NEW -> CS_INIT 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:52 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:239 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_INIT 2009-01-25 10:35:58 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:444 switch_core_session_run() (OpenZAP/2:1/3400534) State INIT 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:364 channel_on_init() (OpenZAP/2:1/3400534) State Change CS_INIT -> CS_ROUTING 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:444 switch_core_session_run() (OpenZAP/2:1/3400534) State INIT going to sleep 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_ROUTING 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:447 switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING 2009-01-25 10:35:58 [DEBUG] mod_openzap.c:387 channel_on_routing() OpenZAP/2:1/3400534 CHANNEL ROUTING 2009-01-25 10:35:58 [DEBUG] switch_ivr_originate.c:58 originate_on_routing() (OpenZAP/2:1/3400534) State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-25 10:35:58 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:447 switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING going to sleep 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_CONSUME_MEDIA 2009-01-25 10:35:58 [DEBUG] switch_core_state_machine.c:466 switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA 2009-01-25 10:35:59 [DEBUG] ozmod_analog.c:615 zap_analog_channel_run() Detected tone DIAL on 2:1 2009-01-25 10:35:59 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got FXO sig 2:1 [TONE_DETECTED] 2009-01-25 10:35:59 [WARNING] mod_openzap.c:1196 on_fxo_signal() Unhandled type for channel 2:1 2009-01-25 10:35:59 [DEBUG] zap_io.c:1179 zchan_activate_dtmf_buffer() Created DTMF Buffer! 2009-01-25 10:35:59 [DEBUG] zap_io.c:1715 handle_dtmf() 2:1 GENERATE DTMF [3400534] 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:302 zap_analog_channel_run() Changing state on 2:1 from DIALING to UP 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for UP 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got FXO sig 2:1 [UP] 2009-01-25 10:36:03 [DEBUG] switch_channel.c:1710 switch_channel_perform_mark_answered() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:36:03 [NOTICE] mod_openzap.c:1180 on_fxo_signal() Channel [OpenZAP/2:1/3400534] has been answered 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177 switch_channel_audio_sync() OpenZAP/2:1/3400534 receive message [AUDIO_SYNC] 2009-01-25 10:36:03 [DEBUG] switch_channel.c:1768 switch_channel_perform_answer() OpenZAP/1:1/93400534 receive message [ANSWER] 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:813 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2009-01-25 10:36:03 [NOTICE] mod_openzap.c:814 channel_receive_message_fxs() Channel [OpenZAP/1:1/93400534] has been answered 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177 switch_channel_audio_sync() OpenZAP/1:1/93400534 receive message [AUDIO_SYNC] 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511 switch_core_session_perform_receive_message() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:36:03 [DEBUG] switch_ivr_originate.c:1627 switch_ivr_originate() Originate Resulted in Success: [OpenZAP/2:1/3400534] 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177 switch_channel_audio_sync() OpenZAP/2:1/3400534 receive message [AUDIO_SYNC] 2009-01-25 10:36:03 [DEBUG] switch_channel.c:177 switch_channel_audio_sync() OpenZAP/1:1/93400534 receive message [AUDIO_SYNC] 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:862 switch_ivr_multi_threaded_bridge() OpenZAP/2:1/3400534 receive message [BRIDGE] 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511 switch_core_session_perform_receive_message() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:869 switch_ivr_multi_threaded_bridge() OpenZAP/1:1/93400534 receive message [BRIDGE] 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:511 switch_core_session_perform_receive_message() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:36:03 [DEBUG] switch_ivr_bridge.c:913 switch_ivr_multi_threaded_bridge() (OpenZAP/2:1/3400534) State Change CS_CONSUME_MEDIA -> CS_EXCHANGE_MEDIA 2009-01-25 10:36:03 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:03 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 1:1 for UP 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got FXS sig [UP] 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:466 switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA going to sleep 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_EXCHANGE_MEDIA 2009-01-25 10:36:03 [DEBUG] switch_core_state_machine.c:457 switch_core_session_run() (OpenZAP/2:1/3400534) State EXCHANGE_MEDIA 2009-01-25 10:36:03 [DEBUG] mod_openzap.c:511 channel_on_exchange_media() CHANNEL EXCHANGE_MEDIA 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:744 process_event() EVENT [ONHOOK][1:1] STATE [UP] 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:780 process_event() Changing state on 1:1 from UP to DOWN 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got FXS sig [STOP] 2009-01-25 10:36:16 [NOTICE] mod_openzap.c:1300 on_fxs_signal() Hangup OpenZAP/1:1/93400534 [CS_EXECUTE] [NORMAL_CLEARING] 2009-01-25 10:36:16 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal OpenZAP/1:1/93400534 [KILL] 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:36:16 [DEBUG] zap_io.c:1125 zap_channel_done() channel done 1:1 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:726 zap_analog_channel_run() ANALOG CHANNEL 1:1 thread ended. 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:360 audio_bridge_thread() OpenZAP/1:1/93400534 ending bridge by request from read function 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:435 audio_bridge_thread() BRIDGE THREAD DONE [OpenZAP/1:1/93400534] 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:439 audio_bridge_thread() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:354 audio_bridge_thread() OpenZAP/1:1/93400534 ending bridge by request from write function 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:409 audio_bridge_thread() OpenZAP/2:1/3400534 receive message [UNBRIDGE] 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:511 switch_core_session_perform_receive_message() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:435 audio_bridge_thread() BRIDGE THREAD DONE [OpenZAP/2:1/3400534] 2009-01-25 10:36:16 [DEBUG] switch_ivr_bridge.c:439 audio_bridge_thread() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:36:16 [NOTICE] switch_ivr_bridge.c:470 audio_bridge_on_exchange_media() Hangup OpenZAP/2:1/3400534 [CS_EXCHANGE_MEDIA] [NORMAL_CLEARING] 2009-01-25 10:36:16 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal OpenZAP/2:1/3400534 [KILL] 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:457 switch_core_session_run() (OpenZAP/2:1/3400534) State EXCHANGE_MEDIA going to sleep 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_HANGUP 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:429 channel_on_hangup() Changing state on 2:1 from UP to HANGUP 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:472 channel_on_hangup() OpenZAP/2:1/3400534 CHANNEL HANGUP 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() OpenZAP/2:1/3400534 Standard HANGUP, cause: NORMAL_CLEARING 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP going to sleep 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:939 switch_core_session_thread() Session 2 (OpenZAP/2:1/3400534) Locked, Waiting on external entities 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:454 switch_core_session_run() (OpenZAP/1:1/93400534) State EXECUTE going to sleep 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:957 switch_core_session_thread() Session 2 (OpenZAP/2:1/3400534) Ended 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:959 switch_core_session_thread() Close Channel OpenZAP/2:1/3400534 [CS_HANGUP] 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/1:1/93400534) Running State Change CS_HANGUP 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP 2009-01-25 10:36:16 [DEBUG] mod_openzap.c:472 channel_on_hangup() OpenZAP/1:1/93400534 CHANNEL HANGUP 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() OpenZAP/1:1/93400534 Standard HANGUP, cause: NORMAL_CLEARING 2009-01-25 10:36:16 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP going to sleep 2009-01-25 10:36:16 [DEBUG] switch_core_session.c:939 switch_core_session_thread() Session 1 (OpenZAP/1:1/93400534) Locked, Waiting on external entities 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:957 switch_core_session_thread() Session 1 (OpenZAP/1:1/93400534) Ended 2009-01-25 10:36:16 [NOTICE] switch_core_session.c:959 switch_core_session_thread() Close Channel OpenZAP/1:1/93400534 [CS_HANGUP] 2009-01-25 10:36:16 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for HANGUP 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:351 zap_analog_channel_run() Changing state on 2:1 from HANGUP to DOWN 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2009-01-25 10:36:17 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got FXO sig 2:1 [STOP] 2009-01-25 10:36:17 [DEBUG] zap_io.c:1125 zap_channel_done() channel done 2:1 2009-01-25 10:36:17 [DEBUG] ozmod_analog.c:726 zap_analog_channel_run() ANALOG CHANNEL 2:1 thread ended. LOG OF FAILED CALLS ================== 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:152 switch_core_standard_on_execute() OpenZAP/1:1/93400534 Execute bridge(openzap/2/1/3400534) 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:340 tech_init() Set codec PCMU 20ms 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:1017 channel_outgoing_channel() Connect outbound channel OpenZAP/2:1/3400534 2009-01-25 10:36:55 [NOTICE] switch_channel.c:565 switch_channel_set_name() New Channel OpenZAP/2:1/3400534 [079f5420-ea89-11dd-9f5c-290fb4a527a4] 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:1026 channel_outgoing_channel() (OpenZAP/2:1/3400534) State Change CS_NEW -> CS_INIT 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:52 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:239 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_INIT 2009-01-25 10:36:55 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:444 switch_core_session_run() (OpenZAP/2:1/3400534) State INIT 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:364 channel_on_init() (OpenZAP/2:1/3400534) State Change CS_INIT -> CS_ROUTING 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:444 switch_core_session_run() (OpenZAP/2:1/3400534) State INIT going to sleep 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_ROUTING 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:447 switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING 2009-01-25 10:36:55 [DEBUG] mod_openzap.c:387 channel_on_routing() OpenZAP/2:1/3400534 CHANNEL ROUTING 2009-01-25 10:36:55 [DEBUG] switch_ivr_originate.c:58 originate_on_routing() (OpenZAP/2:1/3400534) State Change CS_ROUTING -> CS_CONSUME_MEDIA 2009-01-25 10:36:55 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:447 switch_core_session_run() (OpenZAP/2:1/3400534) State ROUTING going to sleep 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_CONSUME_MEDIA 2009-01-25 10:36:55 [DEBUG] switch_core_state_machine.c:466 switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:744 process_event() EVENT [ONHOOK][1:1] STATE [IDLE] 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:780 process_event() Changing state on 1:1 from IDLE to DOWN 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:1212 on_fxs_signal() got FXS sig [STOP] 2009-01-25 10:37:08 [NOTICE] mod_openzap.c:1300 on_fxs_signal() Hangup OpenZAP/1:1/93400534 [CS_EXECUTE] [NORMAL_CLEARING] 2009-01-25 10:37:08 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal OpenZAP/1:1/93400534 [KILL] 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/1:1/93400534 [BREAK] 2009-01-25 10:37:08 [DEBUG] zap_io.c:1125 zap_channel_done() channel done 1:1 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:726 zap_analog_channel_run() ANALOG CHANNEL 1:1 thread ended. 2009-01-25 10:37:08 [NOTICE] switch_ivr_originate.c:1566 switch_ivr_originate() Hangup OpenZAP/2:1/3400534 [CS_CONSUME_MEDIA] [ORIGINATOR_CANCEL] 2009-01-25 10:37:08 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal OpenZAP/2:1/3400534 [KILL] 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:807 switch_core_session_signal_state_change() Send signal OpenZAP/2:1/3400534 [BREAK] 2009-01-25 10:37:08 [DEBUG] switch_ivr_originate.c:1691 switch_ivr_originate() Originate Cancelled by originator termination Cause: 487 [ORIGINATOR_CANCEL] 2009-01-25 10:37:08 [INFO] mod_dptools.c:1909 audio_bridge_function() Originate Failed. Cause: ORIGINATOR_CANCEL 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:454 switch_core_session_run() (OpenZAP/1:1/93400534) State EXECUTE going to sleep 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/1:1/93400534) Running State Change CS_HANGUP 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:472 channel_on_hangup() OpenZAP/1:1/93400534 CHANNEL HANGUP 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() OpenZAP/1:1/93400534 Standard HANGUP, cause: NORMAL_CLEARING 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/1:1/93400534) State HANGUP going to sleep 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:939 switch_core_session_thread() Session 3 (OpenZAP/1:1/93400534) Locked, Waiting on external entities 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:957 switch_core_session_thread() Session 3 (OpenZAP/1:1/93400534) Ended 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:466 switch_core_session_run() (OpenZAP/2:1/3400534) State CONSUME_MEDIA going to sleep 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:959 switch_core_session_thread() Close Channel OpenZAP/1:1/93400534 [CS_HANGUP] 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:379 switch_core_session_run() (OpenZAP/2:1/3400534) Running State Change CS_HANGUP 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:429 channel_on_hangup() Changing state on 2:1 from DIALING to HANGUP 2009-01-25 10:37:08 [DEBUG] mod_openzap.c:472 channel_on_hangup() OpenZAP/2:1/3400534 CHANNEL HANGUP 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() OpenZAP/2:1/3400534 Standard HANGUP, cause: ORIGINATOR_CANCEL 2009-01-25 10:37:08 [DEBUG] switch_core_state_machine.c:410 switch_core_session_run() (OpenZAP/2:1/3400534) State HANGUP going to sleep 2009-01-25 10:37:08 [DEBUG] switch_core_session.c:939 switch_core_session_thread() Session 4 (OpenZAP/2:1/3400534) Locked, Waiting on external entities 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:957 switch_core_session_thread() Session 4 (OpenZAP/2:1/3400534) Ended 2009-01-25 10:37:08 [NOTICE] switch_core_session.c:959 switch_core_session_thread() Close Channel OpenZAP/2:1/3400534 [CS_HANGUP] 2009-01-25 10:37:08 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for HANGUP 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:351 zap_analog_channel_run() Changing state on 2:1 from HANGUP to DOWN 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:410 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2009-01-25 10:37:09 [DEBUG] mod_openzap.c:1153 on_fxo_signal() got FXO sig 2:1 [STOP] 2009-01-25 10:37:09 [DEBUG] zap_io.c:1125 zap_channel_done() channel done 2:1 2009-01-25 10:37:09 [DEBUG] ozmod_analog.c:726 zap_analog_channel_run() ANALOG CHANNEL 2:1 thread ended.

4 10

Can't get debug to stop
by Ron McCarthy 31 Jan '09

31 Jan '09

Hi, I enabled debug and SIP trace via: export SOFIA_DEBUG=9 export NUA_DEBUG=9 export NTA_DEBUG=9 export TPORT_DEBUG=9 export TPORT_LOG=1 I then tried to unset the vars, and also export SOFIA_DEBUG=0 and so on. Still the SIP traces are on the screen. I exitied screen and tried again still no go. What am I doing wrong? Im running bash on FreeBSD. Any help would be great, id have to reboot this box just cause I cant figure this out! Thanks

2 4

ANNOUNCEMENT: FreeSWITCH 1.0.3 RC1 Available
by Michael Collins 31 Jan '09

31 Jan '09

The FreeSWITCH development team is happy to announce the immediate availability of FreeSWITCH 1.0.3 RC1. The download is available here: http://files.freeswitch.org/freeswitch-1.0.3RC1.tar.gz More information regarding this release candidate can be found here: http://freeswitch.org/node/159 Please help us out by downloading and running the latest FreeSWITCH release. Thank you all for your continued support of this awesome project! -MC

1 0

Truncated voice mail, FreeSWITCH or GFS?
by Marc Lewis 31 Jan '09

31 Jan '09

Running on trunk version 10295 as well as 10207, 10146 and 10067. The problem is with some voicemails being truncated between 8 and 35 seconds into the recording. This is when the person leaving the message is actively speaking, FS simply stops recording and processes the message (i.e. saves it and possibly emails it). Nothing is different in the logs for these messages from the ones that save normally, in other words, I can't seem to find a pattern at all. This is in a clustered environment with the FS nodes writing directly to fibre attached storage and using GFS as the shared storage filesystem. There are only 4 nodes all P4 2.8 or 3.0GHz Xeon's in this cluster and they don't have a huge load. They're all running stock Centos 5.2. The only task this cluster has is to run FS and the supporting web and database servers that go with it. The FS processes run exclusively on the node. Has anyone else seen this problem with voicemail? If not, I'm thinking that the problem may be with GFS, either timing out or prematurely closing the file. I'm in the process of testing trunk version 11543, but since the problem is intermittent I'm not sure if thats going to fix the problem. I'm primarily interested to see if anyone else is encountering similar issues with truncated voicemail to know if its my cluster. - Marc -- Marc Lewis Avvatel Corporation

2 3

What's will be new or fixed in the upcomimg 1.03 FS release?
by mszlazak＠aol.com 31 Jan '09

31 Jan '09

What's will be new or fixed in the upcomimg 1.03 FS release?

2 1

Suggestion for limiting concurrent active calls
by shehzad p 31 Jan '09

31 Jan '09

Hi all Is there any way so that I can limit the concurrent active calls. When the call comes to Freeswitch server I route the calls to another Gateway using Javascript. While routing the call I will have Caller Gateway IP, Dialed Number and Destination Gateway IP, So how can I limit the calls based on Caller GW IP, Dialed Number and Destination GW IP. Thanks in advance. -- View this message in context: http://www.nabble.com/Suggestion-for-limiting-concurrent-active-calls-tp217… Sent from the Freeswitch-users mailing list archive at Nabble.com.

2 1

Javascript Dial and Print the UUID in event socket
by Gopalakrishnan A.N 31 Jan '09

31 Jan '09

Hi, I am using event socket. I am trying to dial a outbound number in Javascript (api jsrun <script> arguments) and need to bridge the call outside the javascript. Can we do this as a batch processing. When I run the script I tried to play a voice file, so that the session answer the call and a voice file is played in the other end. But I cant able to bridge the call outside of the script. And also I cant able to print the UUID of the established call by the session. Please assist me how to go ahead for this. -- Thank you with regards, Gopal,

1 0