- FreeSWITCH-users - FreeSWITCH Mailing Lists

About FreeSwitch
by Vikas Sharma 06 Mar '09

06 Mar '09

HI all, I am new to this. Can anybody tell me that freeSwitch can be used as PBX indecently? Can it be integrated with other pbx as a media server? If yes, what features it has as a media server? Thnax for any help. -- vikas sharma

7 6

Re: [Freeswitch-users] Setting External IP
by Kristian Kielhofner 06 Mar '09

06 Mar '09

I've never tried it but Linux routing should be able to help you with this. Create a new profile with the different address. Make sure the aliases on your network interface have a /32 netmask. Create a static route to that peer using the right outbound interface/address. Anything more than this will require iptables/iproute ip policy routing foo. Hopefully you can avoid all of that... -- Kristian Kielhofner http://blog.krisk.org -original message- Subject: [Freeswitch-users] Setting External IP From: "Nik Middleton" <nik.middleton(a)noblesolutions.co.uk> Date: 03/06/2009 6:05 AM Hi Guys, In External.xml in sip profiles I have <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> Can I override these for a given gateway profile? I have one gateway that's expecting a local routed IP address due to the way that it's routed, but the other one expects the public IP, hence the need to make it gateway specific Regards, _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

Setting External IP
by Nik Middleton 06 Mar '09

06 Mar '09

Hi Guys, In External.xml in sip profiles I have <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> Can I override these for a given gateway profile? I have one gateway that's expecting a local routed IP address due to the way that it's routed, but the other one expects the public IP, hence the need to make it gateway specific Regards,

3 3

16 threads didn't exit
by Cavalera Claudio Luigi 06 Mar '09

06 Mar '09

Hello list, I'm trying to track down a seg fault issue with a fs Revision: 11489 Here is the backtrace pastebin: http://pastebin.freeswitch.org/7009 but before digging the dump I would like to understand: am I the only one having error like this in fs console: "Error in my_thread_global_end(): 16 threads didn't exit" I'm asking this because googling around did not take me to much relation between this error and fs. In fact as you can see the error does not have the usual fs logging format with date time and logging level, it's just a yellow line printed out in console. It seems to me related on php and mysql from what I've read here http://forums.mysql.com/read.php?10,153077,206930#msg-206930 It's possible that my fs segfaults not because of this error at all, but I just wanted to inform you asap in case someone could face similar issues. I've enabled crash-protection in switch.conf.xml although I'm not sure what it does. Best Regards, Claudio Internet Email Confidentiality Footer ----------------------------------------------------------------------------------------------------- La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto. This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. -----------------------------------------------------------------------------------------------------

3 6

OpenZap and Sangoma A500 BRI card
by Sergey Kirillov 06 Mar '09

06 Mar '09

Hi everybody, I'm trying to use Sangoma A500 BRI card with OpenZap, but it does not work. Can somebody help to to configure it? Problem log (Incoming call): 2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event() Unhandled event 2 2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event() Unhandled event 2 2009-03-06 14:58:14 [WARNING] ozmod_wanpipe.c:953 wanpipe_next_event() Unhandled event 2 2009-03-06 14:58:14 [NOTICE] switch_channel.c:567 switch_channel_set_name() New Channel OpenZAP/1:1/2360012 [7473c92a-0a4e-11de-9dc3-c56d4d411902] 2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt() Processing 80503820933->2360012 in context default 2009-03-06 14:58:14 [NOTICE] switch_ivr.c:1343 switch_ivr_session_transfer() Transfer OpenZAP/1:1/2360012 to XML[1000@default] 2009-03-06 14:58:14 [INFO] mod_dialplan_xml.c:233 dialplan_hunt() Processing 80503820933->1000 in context default 2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730 switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 1 execute_extension::dx XML features 2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730 switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 2 record_session::/opt/freeswitch/recordings/80503820933.2009-03-06-14-58-14.wav 2009-03-06 14:58:14 [INFO] switch_ivr_async.c:1730 switch_ivr_bind_dtmf_meta_session() Bound B-Leg: 3 execute_extension::cf XML features 2009-03-06 14:58:14 [NOTICE] switch_channel.c:567 switch_channel_set_name() New Channel sofia/internal/sip:1000@192.168.122.1:5061;transport=udp [748a2ba2-0a4e-11de-9dc3-c56d4d411902] 2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state 2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state 2009-03-06 14:58:14 [NOTICE] switch_ivr_originate.c:1588 switch_ivr_originate() Pre-Answer OpenZAP/1:1/2360012! 2009-03-06 14:58:14 [ERR] Span:0 Q.921() Received UA frame in invalid state 2009-03-06 14:58:14 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received unhandled message 125 (0x7d) 2009-03-06 14:58:15 [CRIT] ozmod_isdn.c:964 zap_isdn_931_34() Received unhandled message 125 (0x7d) 2009-03-06 14:58:26 [NOTICE] Span:0 Q.921() I frame in invalid state ignored Here are my config files --- openzap.conf -- [span wanpipe BRI_1] name => BRI_1 trunk_type => bri b-channel => 1:1-2 d-channel => 1:3 --- openzap.conf.xml --- <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/>    </settings> <pri_spans> <span name="BRI_1">  <param name="q921loglevel" value="info"/> <param name="q931loglevel" value="info"/> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration> --- wanpipe1.conf --- [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] wp1aft1 = wanpipe1, auto, API, Comment wp1aft2 = wanpipe1, auto, API, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 120 LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_HW_DTMF = NO [wp1aft1] HDLC_STREAMING = NO ACTIVE_CH = 1-15.17-31 IDLE_FLAG = 0x7E MTU = 240 MRU = 240 DATA_MUX = NO TDMV_HWEC = NO [wp1aft2] HDLC_STREAMING = YES ACTIVE_CH = 16 MTU = 1500 MRU = 1500 DATA_MUX = NO TDMV_HWEC = NO

1 0

make freeswitch-snapshot
by mashudi 06 Mar '09

06 Mar '09

Hi Folk, i got error while conduct ./make freeswitch-snapshot on debian 2.6 x86 here is the error : /usr/bin/ld: cannot find -lodbc collect2: ld returned 1 exit status make[2]: *** [libfreeswitch.la] Error 1 Making all in src Making all in mod making all mod_amr make[5]: *** No rule to make target `/usr/src/freeswitch-snapshot/libfreeswitch.la', needed by `mod_amr.so'. Stop. make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Did I miss something ? thank you for your support. mashudi ***************************************** Sekarang Gratis Nelpon SLJJ Flexi diperluas ke Yogya *****************************************

4 4

Hung Channels (SVN Rev 10231)
by Eric Liedtke 06 Mar '09

06 Mar '09

Greetings, I've been using FS in production on this rev (I realize it's pretty far behind current) and it's been running well, save 1 issue. The basic setup is an SBC , 2 GiG-E ports, 1 public , 1 private. I have 2 sip profiles created , 1 per ip interface. This is being used to terminate traffic to a provider so calls are only 1 direction. They come into the private side profile, get routed via dialplan to the gateway defined in the external profile and on to the vendor. Pretty simple. I have noticed that under load (50 or so cps with ~800-900 bridged calls up) that over time some channels on the public side seem to get "stuck". Due to the nature of how this is being used , I would expect both sip profiles to show the same number of channels in use any time i do a 'sofia status' ( or at least be within a channel or 2 of each other). However after a day of heavy use I had a disparity of ~250 channels. These extra channels also seem to put some continual load on the 'system cpu' as well , reported via top. Of course due to the load on the box I have to keep logging turned way down. So I've been trying to troubleshoot it as best I can. Last night I grabbed a core file and started in with GDB today. I found the 120 or so threads that represented real active calls when I took the corefile, I also found ~250 threads that appeared to be stuck in the CS_NEW state. The backtraces on all of them looks the same, annotated below. I walked through the code path by hand , based on the bt's and I don't see how this could be happening unless it's a locking issue. But as far as I can tell each session has it's own mutex defined in the switch_core_session_t struct, so I wouldn't think they would be stepping on each other. I also would have expected if it were something of a deadlock nature it would stop processing calls all together. I grabbed the commands from the .gdbinit (super handy btw!!) and have been trolling through the variables to try to ascertain something about why these threads seem to be stuck, but am not having much luck even coming up with a scenario to try to replicate the issue. If anyone has any pointers as to where I might look next it would be greatly appreciated. We will be updating to the newest release soon, however I was hoping to nail down what is going so I can systematically replicate it and verify by testing in the lab that it is fixed , rather than just pushing the new release to produvction and hoping. Thanks in advance for any tips/pointers anyone may have. -e ......bt and bt full for a single "hung" thread #0 0xb7fd5410 in __kernel_vsyscall () #1 0xb7d14cb6 in nanosleep () from /lib/tls/i686/cmov/libc.so.6 #2 0xb7d4f1dc in usleep () from /lib/tls/i686/cmov/libc.so.6 #3 0xb7ee02cd in switch_sleep (t=1000) at src/switch_time.c:143 #4 0xb7e9da03 in switch_core_session_run (session=0x95fe270) at src/switch_core_state_machine.c:462 #5 0xb7e9c765 in switch_core_session_thread (thread=0x9ada840, obj=0x95fe270) at src/switch_core_session.c:853 #6 0xb7efd916 in dummy_worker (opaque=0x9ada840) at threadproc/unix/thread.c:138 #7 0xb7e034fb in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 #8 0xb7d55e5e in clone () from /lib/tls/i686/cmov/libc.so.6 (gdb) bt full #0 0xb7fd5410 in __kernel_vsyscall () No symbol table info available. #1 0xb7d14cb6 in nanosleep () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #2 0xb7d4f1dc in usleep () from /lib/tls/i686/cmov/libc.so.6 No symbol table info available. #3 0xb7ee02cd in switch_sleep (t=1000) at src/switch_time.c:143 No locals. #4 0xb7e9da03 in switch_core_session_run (session=0x95fe270) at src/switch_core_state_machine.c:462 exception = 0 '\0' state = <value optimized out> endstate = CS_NEW endpoint_interface = <value optimized out> driver_state_handler = (const switch_state_handler_table_t *) 0xb73b1720 application_state_handler = <value optimized out> thread_id = 3085554955 env = {{__jmpbuf = {134603552, -1428248680, -1461722504, 9184, -1210273432, -1210014020}, __mask_was_saved = -1210034895, __saved_mask = {__val = {0, 3084988404, 3084937740, 3086469280, 9184, 1, 2976641592, 2833244792, 3086590960, 168036728, 3084937740, 2833244808, 3085923728, 1, 3086590960, 2833244840, 3086590960, 0, 134564192, 2833244840, 3085923728, 134564244, 3086590960, 2833244872, 3085887870, 134564240, 168036728, 3085458203, 3086590960, 2976606624, 134564192, 2833244904}}}} sig = <value optimized out> __func__ = "switch_core_session_run" __PRETTY_FUNCTION__ = "switch_core_session_run" #5 0xb7e9c765 in switch_core_session_thread (thread=0x9ada840, obj=0x95fe270) at src/switch_core_session.c:853 session = (switch_core_session_t *) 0x95fe270 event = <value optimized out> event_str = 0x0 val = <value optimized out> __func__ = "switch_core_session_thread" __PRETTY_FUNCTION__ = "switch_core_session_thread" #6 0xb7efd916 in dummy_worker (opaque=0x9ada840) at threadproc/unix/thread.c:138 No locals. #7 0xb7e034fb in start_thread () from /lib/tls/i686/cmov/libpthread.so.0 No symbol table info available. #8 0xb7d55e5e in clone () from /lib/tls/i686/cmov/libc.so.6

5 8

Newbie's installation: Can't start FS at boot
by dynaguy 06 Mar '09

06 Mar '09

Hello, I am a newbie to FS and I want learn it. So I setup a Centos 5.2 (fresh install) and followed the instruction on the wiki installed the new Freeswitch v1.0.3. After the installation I can start FS by issus command "/usr/local/freeswitch/bin/freeswitch". After that I copied freeswitch.init.centos5 to /etc/init.d/freeswitch and chmod it to 755. Reboot the server and FS is not running. If I try the start up script: [root@localhost build]# /etc/init.d/freeswitch start Starting freeswitch: [ OK ] [root@localhost build]# /etc/init.d/freeswitch status freeswitch dead but subsys locked Did I miss somthing here? Please help. Thanks a lot. dynaguy Here is the copy of the origenal freeswitch.init.centos5 ---------------------------- [root@localhost ~]# cat /etc/init.d/freeswitch #!/bin/bash # # /etc/rc.d/init.d/freeswitch # # The FreeSwitch Open Source Voice Platform # # chkconfig: 345 89 14 # description: Starts and stops the freeswitch server daemon # processname: freeswitch # config: /usr/local/freeswitch/conf/freeswitch.conf # pidfile: /usr/local/freeswitch/log/freeswitch.pid # # Source function library. . /etc/init.d/functions PROG_NAME=freeswitch PID_FILE=${PID_FILE-/usr/local/freeswitch/log/freeswitch.pid} FS_USER=${FS_USER-freeswitch} FS_FILE=${FS_FILE-/usr/local/freeswitch/bin/freeswitch} FS_HOME=${FS_HOME-/usr/local/freeswitch} LOCK_FILE=/var/lock/subsys/freeswitch FREESWITCH_ARGS="-nc" RETVAL=0 # Source options file if [ -f /etc/sysconfig/freeswitch ]; then . /etc/sysconfig/freeswitch fi # <define any local shell functions used by the code that follows> start() { echo -n "Starting $PROG_NAME: " if [ -e $LOCK_FILE ]; then if [ -e $PID_FILE ] && [ -e /proc/`cat $PID_FILE` ]; then echo echo -n $"$PROG_NAME is already running."; failure $"$PROG_NAME is already running."; echo return 1 fi fi cd $FS_HOME daemon --user $FS_USER --pidfile $PID_FILE "$FS_FILE $FREESWITCH_ARGS $FREESWITCH_PARAMS >/dev/null 2>&1" echo RETVAL=$? [ $RETVAL -eq 0 ] && touch $LOCK_FILE; echo return $RETVAL } stop() { echo -n "Shutting down $PROG_NAME: " if [ ! -e $LOCK_FILE ]; then echo echo -n $"cannot stop $PROG_NAME: $PROG_NAME is not running." failure $"cannot stop $PROG_NAME: $PROG_NAME is not running." echo return 1; fi cd $FS_HOME $FS_FILE -stop > /dev/null 2>&1 killproc $PROG_NAME RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f $LOCK_FILE; return $RETVAL } rhstatus() { status $PROG_NAME; } case "$1" in start) start ;; stop) stop ;; status) status $PROG_NAME RETVAL=$? ;; restart) stop start ;; reload) # <cause the service configuration to be reread, either with # kill -HUP or by restarting the daemons, in a manner similar # to restart above> ;; condrestart) [ -f $PID_FILE ] && restart || : ;; *) echo "Usage: $PROG_NAME {start|stop|status|reload|restart}" exit 1 ;; esac exit $RETVAL

4 4

mod_unistim?
by Gerry Hull 05 Mar '09

05 Mar '09

I hear rumors that someone is porting chan_unistim to mod_unistim for FreeSwitch?? I hope so -- I use this on my Asterisk box and would love to use it with FS. There are TONS of i2004 phones on the surplus market these days... I've been buying NOS i2004s, virgin, for less than $10US... The full duplex speakerphones in these phones are as or better than a Polycom. I'll be happy to test this module -- I'm just not a C/++ guy. Gerry

3 3

Problems with record_stereo
by Helmut Kuper 05 Mar '09

05 Mar '09

Hello, I play around with record_session and would like to have caller and callee separated on left and right channel. I found record_stereo is used for this. Unfortunately it doesn't work. A and B leg are still mixed. Additionally I found that B leg is significant louder than A leg, but both legs were local extensions. My Dialplan looks like this: <extension name="Local_Extension"> <condition field="destination_number" expression="^(1234)$"> <action application="set" data="dialed_extension=$1"/> <action application="export" data="dialed_extension=$1"/> <x-action application="ring_ready"/> <x-action application="set" data="ringback=${de-ring}"/>  <action application="export" data="RECORD_STEREO=true"/> <action application="bind_meta_app" data="9 b s record_session::$${base_dir}/recordings/${caller_id_number}.${strftime(%Y-%m-%d-%H-%M-%S)}.wav"/> <action application="bridge" data="user/${dialed_extension}@$${domain}"/> </condition> </extension> regards helmut

3 11