- FreeSWITCH-users - FreeSWITCH Mailing Lists

spandsp_start_tone_detect problem
by Raimundo Pérez Nieves 29 Jan '18

29 Jan '18

Hi guys, I execute my outbound event socket and FS debug shows me the Tone Detected, but there is no event captured. I already test $con->event(“plain”,”all”); and nothing….. $con->sendRecv("myevents $uuidLegB”); $con->execute("spandsp_start_tone_detect","34”); while($con->connected()) { my $e = $con->recvEvent(); if ($e) { my $name = $e->getHeader("event-name"); print "EVENT [$name]\n"; } } Thanks

1 0

start_dtmf_generate not working with opus codec
by Andrew Paul 29 Jan '18

29 Jan '18

Hi all, I am facing a issue with start_dtmf_generate when i use opus codec and SIP INFO dtmf. Caller ( opus/dtmf ) ------------------------ Freeswitch ----------------------------- Calleee ( ulaw/inband) Caller is using jssip webrtc and dtmf is in INFO. For inband dtmf generation i am using start_dtmf_generate in caller channel. The setup is working when i use ulaw or ilbc or alaw codec. When i use webrtc with OPUS codec i am seeing the inband dtmf generation is not working. Webrtc with ulaw codec and dtmf INFO is working fine. Version : FreeSWITCH Version 1.6.17~64bit ( 64bit) I am attaching the opus.conf.xml for the reference. Any idea, why start_dtmf_generate is not working with opus codec ?. Do i need to set any setting for opus ?. Regards Paul

1 0

Re: [Freeswitch-users] spandsp_start_tone_detect is compatible with G729 codec???
by Raimundo Pérez Nieves 29 Jan '18

29 Jan '18

So if I change to G711 spandsp module will detect each tone??? Enviado desde mi iPhone El 25/01/2018, a la(s) 00:29, Alexey Sibyakin <alex(a)freeswitch.com> escribió: > As Brian said most of tones cannot be carried via g729 only some of them. You are just didn't encounter this problem yet. I believe that it's a good idea to convert inband -> rfc2833 right on the border with analog lines (which are g711). > >> On Thu, Jan 25, 2018 at 2:13 AM, Raimundo Pérez Nieves <raimundo.perez.cuba(a)gmail.com> wrote: >> Thanks Brian, but I am using tone_detect with g729 (commercial license) and works very good. That was the reason I tried with spandsp module, because it allows detect tone using cadence. >> What is the meaning of f1 and f2 in segment tone debug, nobody can answer me this question. >> Thanks >> >> Enviado desde mi iPhone >> >> El 24/01/2018, a la(s) 16:40, Brian West <brian(a)freeswitch.com> escribió: >> >>> You can't do tone detect on G729, the bandwidth of the audio is insufficient! >>> >>>> On Wed, Jan 24, 2018 at 5:58 AM, Raimundo Pérez Nieves <raimundo.perez.cuba(a)gmail.com> wrote: >>>> Hello, >>>> spandsp_start_tone_detect is compatible with G729 codec??? >>>> Because Iam testing and I get no result. >>>> >>>> Thanks >>>> >>>> _________________________________________________________________________ >>>> Professional FreeSWITCH Consulting Services: >>>> consulting(a)freeswitch.org >>>> http://www.freeswitchsolutions.com >>>> >>>> Official FreeSWITCH Sites >>>> http://www.freeswitch.org >>>> http://confluence.freeswitch.org >>>> http://www.cluecon.com >>>> >>>> FreeSWITCH-users mailing list >>>> FreeSWITCH-users(a)lists.freeswitch.org >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>>> http://www.freeswitch.org >>> >>> >>> >>> -- >>> >>> Brian West | Co-founder and Developer >>> Need Commercial support? email sales(a)freeswitch.com >>> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 >>> Email: brian(a)freeswitch.com >>> Mobile: 918-424-9378 >>> Website: https://www.FreeSWITCH.com >>> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > > > -- > > Alex Sibyakin | Support Engineer > FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 > Email: alex(a)freeswitch.com > Website: https://www.FreeSWITCH.com > Need commercial support? Contact sales(a)freeswitch.com for details.

2 1

[Security Issue][Need urgent comment]
by Bilal Abbasi 26 Jan '18

26 Jan '18

Hi Users, I am using FreeSWITCH Version 1.6.19 git c540248 . today i noticed very weird issue, that i am getting an attack on one of my dev servers, that somebody is trying to make calls out of the box. And he is able to register the phone via "default" username(check via sngrep), i am using complex password and there is NO USER with name "DEFAULT" on my switch. I tried to register the default user with any random password and it allowed me to register on my softphone. I am really worried, and i can't believe that it's something at FS end. I am sure its some mistake, can somebody help me out please. Regards Abbasi

5 9

Release notes for version 1.6.20?
by Panagiotis Voutskidis 26 Jan '18

26 Jan '18

I show today that there is a new FreeSWITCH release, version 1.6.20 but I can't find anywhere notes about the changes. Can someone post a link? Thanks

3 2

weird bridge dialstring
by David Villasmil 26 Jan '18

26 Jan '18

Hello guys, I've got a test box locally installed, with ip 192.168.2.201. This box has a VM running with FS with ip 10.0.2.15. And users are on network 192.168.2.X USERS(192.168.2.X)->DEBIAN HOST(192.168.2.201)-->FREESWITCH( 10.0.2.15/ext-sip-ip 192.168.2.201) I forwarded all packets to the vm, i can register without issues. these are the 2 registered users: freeswitch@jessie> sofia status profile internal reg Registrations: ================================================================================================= Call-ID: MTVjZTc4Zjg2MmJmNDU0ZDI1ZTRhZjkyZWE1NGI2NWE. User: 1000(a)192.168.2.201 Contact: "" <sip:1000@81.38.181.133:57696 ;rinstance=568188b5832429a3;transport=TCP> Agent: Z 3.3.21933 r21903 Status: Registered(TCP)(unknown) EXP(2018-01-26 14:58:34) EXPSECS(2863) Ping-Status: Reachable Ping-Time: 0.00 Host: jessie IP: 10.0.2.2 Port: 65038 Auth-User: 1000 Auth-Realm: 192.168.2.201 MWI-Account: 1000(a)192.168.2.201 Call-ID: MTVjZTc4Zjg2MmJmNDU0ZDI1ZTRhZjkyZWE1NGI2NWE. User: 1000(a)10.0.2.15 Contact: "" <sip:1000@81.38.181.133:57696 ;rinstance=568188b5832429a3;transport=TCP> Agent: Z 3.3.21933 r21903 Status: Registered(TCP)(unknown) EXP(2018-01-26 15:11:12) EXPSECS(3621) Ping-Status: Reachable Ping-Time: 0.00 Host: jessie IP: 10.0.2.2 Port: 65140 Auth-User: 1000 Auth-Realm: 192.168.2.201 MWI-Account: 1000(a)10.0.2.15 Total items returned: 2 ================================================================================================= But for some reason they can't call each other, i think FS is confused in terms of IPs. I have in internal.xml the ext-sip-ip properly. freeswitch@jessie> sofia xmlstatus profile internal ... <rtp-ip>10.0.2.15</rtp-ip> <ext-rtp-ip>192.168.2.201</ext-rtp-ip> <sip-ip>10.0.2.15</sip-ip> <ext-sip-ip>192.168.2.201</ext-sip-ip> But doing: originate user/1000 &echo() returns USER_NOT_REGISTERED I understand it's a weird setup, but help is appreciated, or else i'll just usa an aws instance, but i'm wondering what's confusing FS. Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 ᐧ

2 1

Re: [Freeswitch-users] What means f1 and f2 in Tone Segment spandsp
by Raimundo Pérez Nieves 26 Jan '18

26 Jan '18

Yes but I found f1=1 and f2 =2 or f1=-1 and f2=-1 in a tone segment, trying to match with a specific descriptor. So which value is matching? Thanks for your time Enviado desde mi iPhone El 26/01/2018, a la(s) 14:38, Guillermo Ruiz Camauer <grcamauer(a)gmail.com> escribió: > Frequency 1 and frequency 2. All DTMF are composed using 2 frequencies. > > Guillermo > > Sent from my iPhone > >> On 26 Jan 2018, at 08:50, Raimundo Pérez Nieves <raimundo.perez.cuba(a)gmail.com> wrote: >> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > >

1 0

FS weird issue with TLS/SRTP and xml_curl on windows
by Bipin Patel 26 Jan '18

26 Jan '18

hi, i have two instances of FS running on a windows server, one is used for routing to carriers and that uses xml files and that works fine, the second instance is set up to allow clients to register to it using tls and srtp and users are authenticated using xml_curl which calls a php script which inturn sends the directory users details on a register from a client. The problem is every few hours or so FS stops accepting new clients unless i restart the service, i check the php script and the webserver and those are running just fine so no idea whats causing FS to stop calling the script or something else. -- Regards, Bipin ------------------------------------------------------------------------

3 5

What means f1 and f2 in Tone Segment spandsp
by Raimundo Pérez Nieves 26 Jan '18

26 Jan '18

2 1

CPU for FS boxes. High freq.? or more cores? or more cache?
by Adam Raszynski 25 Jan '18

25 Jan '18

Hi I plan to buy some new servers to use as FreeSWITCH boxes Servers mainly bridge calls and proxy media from A to B. No special features, but they got a lot of traffic and customers require high quality of calls. What is the best practice in choosing CPU for FS boxes? I see different options: - high frequency (4GHz+) desktop CPU's like Intel i7 series - medium frequency Xeons/Opterons, but with large cache - low frequency Xeons/Opterons but with many cores Unfortunately I can't find reasonably priced CPU's that will have both high freq., many cores and large cache so need to pick what's the best What is most important performance-wise for low latency, high quality media bridging? More single core frequency? More cache? More cores? Kind Regards

7 6