- FreeSWITCH-users - FreeSWITCH Mailing Lists

mod_opal and DTMF...
by Peter Olsson 13 Apr '09

13 Apr '09

When dialing in to FreeSWITCH from a h323 client, FreeSWITCH doesn't seem to detect DTMF. I'm not sure if this is a setting somewhere in the config files, or if it's a bug. The test scenario is simple - use the default FreeSWITCH config, dial in to voicemail (4000) and try to log in. It doesn't detect any DTMF tones. Regards, Peter Olsson

3 6

Can gateways be configured on a per user basis?
by Eric Chamberlain 13 Apr '09

13 Apr '09

Hello, I'm exploring the capabilities of FreeSwitch and have some questions: Can gateways be configured on a per user basis? A user needs to be limited to only their own gateways and other users can't user their gateway. Something like: User 1 has two gateways - VoIP provider A and VoIP provider B User 2 also has two gateways - VoIP provider A and VoIP provider C User 3 has ten gateways User 4 has one gateway etc. Is it possible to have some gateway settings global and some user specific, say proxy and port info global, but username and password are specific to each user? Is it also possible to specify on a per user basis whether the user's gateway will register for the provider? Using the example above, User 1 and User 2 would both register with VoIP provider A. And can that registration happen even if User 1 or User 2 don't have any SIP endpoints registered with FreeSwitch? -- Eric Chamberlain

2 1

Replace sqlite with couchDB?
by Nicolas Brenner 13 Apr '09

13 Apr '09

Hi, I am not very familiar with FS internals, but I recently found this "new" db engine called couchDB. Looks pretty interesting, and its main focus is scalability. Has anybody played with couchDB? does it make sense to replace sqlite with couchDB in FS? Here's a link to the project homepage: - http://couchdb.apache.org/ And here's a video of a presentation given by one of the lead programmers: - http://www.vimeo.com/1992869

4 4

Question about play_and_get_digits in mod_dptools
by Diego Viola 12 Apr '09

12 Apr '09

Hi all, I want to use play_and_get_digits from mod_dptools and have some questions about it. I have used playAndGetDigits() in Lua but I see the syntax in mod_dptools is a bit different and I got a bit confused. I see the syntax in the play_and_get_digits from the mod_dptools is something like this: switch_play_and_get_digits(session, min_digits, max_digits, max_tries, timeout, valid_terminators, prompt_audio_file, bad_input_audio_file, var_name, digit_buffer, sizeof(digit_buffer), digits_regex} Can you please explain to me what the session parameter is? And will this allow me to use a phrase macro so I can call my IVR instead of calling a regular file? This is how I use the playAndGetDigits in Lua: digits = session:playAndGetDigits(2, 5, 3, 7000, "#", "phrase:rac_demo", "", "\\d+"); I call a phrase macro instead of playing a file, can I do the same with play_and_get_digits from mod_dptools? and please explain me what the session parameter in play_and_get_digits is. Thanks, Diego

1 4

Selecting a particular outgoing gateway ?
by David Robinson 12 Apr '09

12 Apr '09

I have configured two providers in sip_profiles/external/example.xml as follows: <include> <gateway name="voicepulse"> <param name="username" value="09515130"/> <param name="realm" value="sip.faktortel.com.au"/> <param name="password" value="xxxx"/> <param name="expire-seconds" value="600"/> <param name="register" value="true"/> <param name="extension" value="1000"/> </gateway> <gateway name="voicepulse_pt"> <param name="username" value="8889200745"/> <param name="realm" value="sip.pennytel.com"/> <param name="password" value="xxxx"/> <param name="expire-seconds" value="600"/> <param name="register" value="true"/> <param name="extension" value="1000"/> </gateway> </include> I have put this in dialplan/defaul.xml to dial out. Regexp matches the first extension if it's a mobile. I want it to route to Pennytelm. voicepulse_pt. <extension name="Long Distance - voicepulse pt"> <condition field="destination_number" expression="^(04\d+)$"> <action application="set" data="effective_caller_id_number=11111111111"/>   <action application="bridge" data="sofia/gateway/voicepulse_pt/ $1"/> </condition> </extension> <extension name="Long Distance - voicepulse"> <condition field="destination_number" expression="^(\d{4,10})$"> <action application="set" data="effective_caller_id_number=99999999999"/>   <action application="bridge" data="sofia/gateway/voicepulse/$1"/> </condition> </extension> Is this how I should be doing this ? I want to specify a different gateway for a different rexep. Please give me some idea what path I should take. David

3 2

Can't send commands with event socket outbound
by Diego Viola 11 Apr '09

11 Apr '09

Hello, I'm testing event socket outbound and whenever I use this: -bash-3.2# nc -v -l 127.0.0.1 8084 I send a call to the socket from my dialplan: <action application="socket" data="127.0.0.1:8084 async full"/> I can receive just fine but I can't send events from the nc cli. I tried with: connect\n\n sendmsg call-command: execute execute-app-name: answer\n\n But nothing happens, what's wrong? Thanks.

1 1

Kill, close or reset a channel that remains with "show channels count"
by mszlazak＠aol.com 11 Apr '09

11 Apr '09

Initially, "show" "channels count" gives "0 total." I then spawn a session from javascript thus: apiExecute("originate", "{id_name='" + call['Caller Name'] + "',id_number=" + call["Caller Number"] + "}sofia/gateway/spa3102PSTN/" + "1" + call["Caller Number"] + "@10.0.0.5:5061 '&javascript(reminder.js \'${id_name}\' ${id_number})'"); Next, I'd like to automatically spawn another session when my channels show "0 total" with apiExecute("show", "channels count"); I've set up a (loop with a msleep) to check when apiExecute("show", "channels count") becomes zero but it never does after the first call and stays at 1. This seems to "mess-up" making the next call. Thanks. Mark.

1 0

announcing mod_cidlookup
by Rupa Schomaker 11 Apr '09

11 Apr '09

Another itch scratched. :) I just committed a new module mod_cidlookup. mod_cidlookup allows one to: * lookup number->name mapping in a local database * lookup number->name mapping from a URL * cache the results of the URL lookup in memcache The URL lookup is useful when using third party number to name lookup services. Read more about it at: http://wiki.freeswitch.org/wiki/Mod_cidlookup File a jira or email me if you have issues. -- -Rupa

1 0

How to find/build FreeSWITCH.Managed.dll?
by Peter Olsson 10 Apr '09

10 Apr '09

Hello again! When trying to load the mod_managed module it get an error that it can't find FreeSWITCH.Managed.dll. So my question is simply - where do I find this file, or how do I build it? I'm using the VC++ Express edition when building, so I guess I also have to install the C# edition - will this solve my problem? Sorry for asking stupid questions here - but I've just been playing around with FreeSWITCH for a day or so :) Regards, Peter Olsson

3 2

Some spidermonkey modules fails to load in Windows
by Peter Olsson 10 Apr '09

10 Apr '09

The spidermonkey modules core_db/odbc, curl, socket and teletone fails to load in Windows. They just return error 1271 (Sym Error). I'm not sure if this is a known issue, or if just doesn't work in Windows :) I've been using the latest SVN when trying this. Any ideas anyone? :) Regards, Peter Olsson

2 2