- FreeSWITCH-users - FreeSWITCH Mailing Lists

max-sessions change when running about 2 hr
by Dome Charoenyost 08 Oct '09

08 Oct '09

Dear sir, I'm running freeswitch with option /opt/freeswitch/bin/freeswitch -nf -waste -nonat -nc I'm setting up max-sessions in switch.conf to 10000 <param name="max-sessions" value="10000"/>  <param name="sessions-per-second" value="50"/> But when fs running about 2 hr. max session down to 299 freeswitch@internal> status UP 0 years, 0 days, 2 hours, 11 minutes, 10 seconds, 434 milliseconds, 251 microseconds 20502 session(s) since startup 271 session(s) 0/50 299 session(s) max Can somone tell me what's happen ? Dome C.

3 6

Recording creates a 388-byte long file and deletes it
by Maciej Aniserowicz 08 Oct '09

08 Oct '09

Hi, When I record a call in FS, it only creates a 388-byte-long wav file. The conversation is no written there, and FS deletes the file when the session finishes. What can cause this strange behavior? Br/ Maciej Aniserowicz

2 2

sofia_Reg_find_url
by srinivasula reddy 08 Oct '09

08 Oct '09

Hi, can any one please tell me how sofia_reg_fine_url, and sofia_glue_execute_sql_callback will work? which format data is storing and retriving. Thanks -- Srinivasula Reddy K

1 0

sofia_reg_handle_register
by srinivasula reddy 08 Oct '09

08 Oct '09

Hi, sofia_reg_handle_register, once it got executed, actuallyl where it will maintain the registred users adn groups data, Thanks Srinivasula Reddy K

1 0

xml_curl configuration for failover cluster
by Peter P GMX 07 Oct '09

07 Oct '09

Hello, I read in the wiki that binding blocks are processed in sequential order in a failover matter. So I created the following bindings for XML-Curl: However grepping the network traffic I can see that Freewitch always fetches both servers fo one binding. So there is no real failover. How can I avoid that? Best regards Peter <configuration name="xml_curl.conf" description="CURL XML Gateway"> <bindings>   <binding name="configuration"> <param name="gateway-url" value="http://localhost/xml_curls/configuration" bindings="configuration"/> </binding>  <binding name="configuration_backup"> <param name="gateway-url" value="http://10.0.0.104/xml_curls/configuration" bindings="configuration"/> </binding>   <binding name="directory"> <param name="gateway-url" value="http://localhost/xml_curls/directory" bindings="directory"/> </binding>  <binding name="directory_backup"> <param name="gateway-url" value="http://10.0.0.104/xml_curls/directory" bindings="directory"/> </binding>   <binding name="dialplan"> <param name="gateway-url" value="http://localhost/xml_curls/dialplan" bindings="dialplan"/> </binding>  <binding name="dialpla_backup"> <param name="gateway-url" value="http://10.0.0.104/xml_curls/dialplan" bindings="dialplan"/> </binding> </bindings> </configuration>

1 0

Bridge application with shared lines
by Yehavi Bourvine 07 Oct '09

07 Oct '09

Hello, We have Polycom and SNOM phones running with FreeSwitch. The Polycoms have shared lines defined and the SNOMs have both shared lines and BLFs (defined as extensions in the phone config). I've tried supporting both, but have some incompatibility: - When calling the Bridge application with data parameter of *sofia*/* profile-name/number@domain* the BLF works ok, but not the shared lines (i.e only one of the phones rings). - When calling the Bridge application with data parameter of * ${sofia_contact(*/*profile-name/number@domain*)} shared lines work ok but BLF doesn't fire up. How do I support both? Is there a way to know whether the destination is a shared one and then chose one of the above formats? Thanks! __Yehavi:

3 2

FreeSWITCH Weekly Conference Call Followup, Agenda For This Week
by Michael Collins 07 Oct '09

07 Oct '09

Ladies and Gentlemen, Thank you for calling in to the weekly FreeSWITCH conference call. Last week's agenda was rather light, so if you have things that you would like to have discussed please be sure to add them here: http://wiki.freeswitch.org/wiki/FS_weekly_2009_10_09 Here are a few updates for everyone to keep in mind: * Starting with the upcoming meeting (Oct 9) the conference will support 48kHz CELT codec. * When you call in, please mute your phone if you are just listening or if you will not be speaking a lot. Background noise from one user isn't usually too bad, but when 10 or 15 people are not muted it can get a little distracting. :) * We are always looking for people to help out. If you are looking for ways to help out then please by all means call the conference. If you cannot call the conference for some reason but still want to help out, please email me off list. We have numerous documentation, janitorial, code review, etc. sub-projects that FreeSWITCH users can help with. * Be sure to update to latest SVN trunk and test test test! We are prepping for 1.0.5 and more people testing means a more stable release delivered more quickly. One topic that came up was the testing of Mike van Lammerman's Ultramonkey setup. (http://bit.ly/8zZUS) Several people agreed to try it out. We would love to see others try it out and report back their experiences. Lastly, we'd like to thank everyone who has been helping out with testing, documentation, and answering questions on the email list and IRC channels. A special thanks to Diego Viola for doing lots of wiki cleanup lately. Everyone's efforts are appreciated. -Michael

4 5

Re: [Freeswitch-users] Configuring Nibble Bill
by Ahmed Munir 07 Oct '09

07 Oct '09

Hi, Thanks for replying. The advise u gave resolved my problem. I want to ask three questions related to nibble bills, as I 'm listing down below; 1- Can we select/use dynamic tables for billing using nibble bill? 2- Can we define more than two tables and attributes in nibblebill.conf.xml? 3- As Nibble bill is use to deduct amount of user account, Can we deduct minutes instead of cash? Because my case is, if a user buy a package and I only want to deducts his/her minutes. How we can resolve it by nibble bill? / What other way we can resolve it? Kindly advise soon. > > ---------- Forwarded message ---------- > From: Todd Baumgartner <todd.baumgartner(a)gmail.com> > To: freeswitch-users(a)lists.freeswitch.org > Date: Tue, 6 Oct 2009 10:31:06 -0400 > Subject: Re: [Freeswitch-users] Cannot connect to ODBC driver/database > freeswitchdb > Ahmed, > > I believe you need to specify the database name as it is configured in the > odbc.ini > > I am assuming you have something like this in your nibblebill.conf.xml > > <param name="db_dsn" value="freeswitchdb"/> > > Try changing it to this as it is named in the odbc.ini: > > <param name="db_dsn" value="MySQL-freeswitch"/> > > > Thanks, > > Todd > > > > On Tue, Oct 6, 2009 at 6:11 AM, Ahmed Munir <ahmedmunir007(a)gmail.com>wrote: > >> Hi, >> I've installed FS on Ubuntu 9.04 and I want to run mod_nibbles on it. I >> follow the steps to configure my ODBC connection with MySQL as explained in >> wiki (mod_nibbles and mod_spidermonkey). But FS, unable to connect it. The >> error I got is listed below when I restart FS, >> >> 2009-10-06 15:47:21.164590 [ERR] switch_odbc.c:188 STATE: IM002 CODE 0 >> ERROR: [unixODBC][Driver Manager]Data source name not found, and no default >> driver specified >> 2009-10-06 15:47:21.164617 [CRIT] mod_nibblebill.c:221 Cannot connect to >> ODBC driver/database freeswitchdb (user: root / pass password) >> 2009-10-06 15:47:21.164650 [CONSOLE] switch_loadable_module.c:889 >> Successfully Loaded [mod_nibblebill] >> 2009-10-06 15:47:21.164664 [NOTICE] switch_loadable_module.c:248 Adding >> Application 'nibblebill' >> 2009-10-06 15:47:21.164710 [NOTICE] switch_loadable_module.c:270 Adding >> API Function 'nibblebill' >> >> But when I use isql it accepts my odbc connection i.e. isql >> MySQL-freeswitch >> >> I'm listing my settings of odbc.ini and odbcinst.ini as listed below; >> >> odbc.ini >> -------------- >> [MySQL-freeswitch] >> Driver = MySQL >> #Driver = /usr/lib/odbc/libodbcmyS.so >> Description = Connector/ODBC Driver DSN With FreeSwitch >> SERVER = localhost >> PORT = 3306 >> USER = root >> Password = password >> Database = freeswitchdb >> >> odbcinst.ini >> ------------------- >> [MySQL] >> Description = ODBC for MySQL >> Driver = /usr/lib/odbc/libmyodbc.so >> Setup = /usr/lib/odbc/libodbcmyS.so >> FileUsage = 1 >> >> >> odbc.ini and odbcinst.ini are located at /etc/. Even I set my odbc >> connection setting as I provide with this link; >> http://dev.mysql.com/doc/refman/5.0/en/connector-odbc-configuration-dsn-uni… >> >> But unfortunately my problem is unresolved then. >> >> >> Kindly advise me, how can I resolve this problem? >> >> -- >> Regards, >> >> Ahmed Munir >> >> >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > -- Regards, Ahmed Munir

1 0

oz debug says error
by lakshmanan ganapathy 07 Oct '09

07 Oct '09

Hi all, I've compiled the freeswitch with libpri support. But when I execute oz libpri debug 1 all, I got the following error. API CALL [oz(libpri debug 1 all )] output: src/ozmod/ozmod_libpri/ozmod_libpri.c: -ERR invalid span. Here is my openzap configurations. openzap.conf [span zt PRI_1] trunk_type => e1 b-channel => 1:1-15 d-channel=> 1:16 b-channel => 1:17-31 openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <pri_spans> <span id="1" name="PRI_1"> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="q931"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </pri_spans> </configuration> I feel something I've missed in configurations. Please tell me how to get rid of that error.

5 7

how to Conference with picup?
by Filip Lyncker 07 Oct '09

07 Oct '09

Hi List, maybe someone can give me some hints to get faster into this stuff. Here the use case: I am Ext A and talking to Ext B. Now Ext C is calling to another number : D. How can I 1. Pic up the calling Ext C ? 2. Include it to my current call to Ext A ? I would need some infos wich elements in my dialplan i have to use and how to configure them ... maybe you guys know some documentation else about this issue ... thanks a lot regards, Filip -- _________________________________ Filip Lyncker, Dipl.-Inform. (FH) Lyncker & Theis GmbH Wilhelmstr. 16 65185 Wiesbaden Germany Fon +49 611/9006951 Fax +49 611/9406125 Handelsregister: HRB 23156 Amtsgericht Wiesbaden Steuernummer: 4023897051 USt-IdNr.: DE255806399 Geschäftsführer: Filip Lyncker, Armin Theis

1 0