- FreeSWITCH-users - FreeSWITCH Mailing Lists

Network cable disconnection
by Suneel Papineni 28 Oct '09

28 Oct '09

Hi, I have configured FreeSwitch and played it by making calls. Every thing went fine. Then I tried to see what happens if network cable is unplugged. Freeswitch shown an error saying ping failed to the gateway and IP address is changed to local system IP. After sometime network cable plugged back in and in another 30 seconds freeswitch has shown it got the IP of gateway and changed back from local IP to gateway IP. After that when I tried to make calls, calls are not going through. Even there is no log displayed in Freeswitch. Please find below the logs... freeswitch@QA360BASExp> 2009-10-28 16:46:13.156250 [WARNING] sofia.c:2814 Ping failed ihub-trunk 2009-10-28 16:46:13.234375 [INFO] mod_sofia.c:3160 IP change detected [192.168.12.10]->[192.168.20.138] []->[] 2009-10-28 16:46:13.265625 [NOTICE] sofia_glue.c:3444 Reload XML [Success] 2009-10-28 16:46:13.265625 [INFO] switch_time.c:661 Timezone reloaded 0 definitions 2009-10-28 16:46:14.156250 [NOTICE] sofia.c:921 Waiting for worker thread 2009-10-28 16:46:14.156250 [NOTICE] sofia_glue.c:3505 deleted gateway ihub-trunk 2009-10-28 16:46:14.156250 [NOTICE] sofia_reg.c:2122 Added gateway 'ihub-trunk' to profile 'TrunkExternal' 2009-10-28 16:46:14.156250 [NOTICE] sofia.c:2767 Started Profile TrunkExternal [sofia_reg_TrunkExternal] 2009-10-28 16:46:14.156250 [ERR] sofia.c:805 Error Creating SIP UA for profile: TrunkExternal 2009-10-28 16:46:14.156250 [NOTICE] sofia_glue.c:3505 deleted gateway ihub-trunk 2009-10-28 16:46:53.234375 [INFO] mod_sofia.c:3160 IP change detected [192.168.20.138]->[192.168.12.10] []->[] 2009-10-28 16:46:53.281250 [NOTICE] sofia_glue.c:3444 Reload XML [Success] 2009-10-2816:46:53.281250 [INFO] switch_time.c:661 Timezone reloaded 0 definitions --After this there were no messages Calls went through if I reload freeswitch. Another surprise thing is I checked for the active ports in the system before and after cable unplugged. Port 5060 disappeared after cable is plugged out. This doesn't display even after cable is plugged back in. Thanks & Regards Suneel ************************************************************************* Please consider the environment before printing this e-mail ************************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. http://www.mettoni.com Mettoni Ltd Registered in England and Wales: 4485956 9400 Garsington Road, Oxford Business Park, Oxford, OX4 2HN *************************************************************************

1 0

FreeSWITCH on FreeBSD
by Mikhail T. 28 Oct '09

28 Oct '09

Hello! I'm researching a phone system for an organization with 8-12 members. The place has an Internet connection via Verizon FIOS. My first choice of the operating system is FreeBSD (preferably -- on amd64 platform). FreeBSD's port (net/freeswitch) seems nice and currently installs version 1.0.4.3. Although fairly proficient with Unix and FreeBSD in particular, I'm very new to the field of computer telephony, so my questions are most likely to be rather naive. I apologize... * What hardware is known to work well on FreeBSD? * What else -- other than a computer with a phone card -- will I need? * Do end-user phones have to be regular analog phones (all plugged-in to the computer), or IP-phones, such as made by Avaya (connecting via an Ethernet switch)? * How is the computer connecting to the world? Do I plug-in the incoming analog phone line(s) somewhere, or is it going to go through the Internet? * If the connection to the world is over the Internet, don't we need an account with someone else, or is Verizon known to work with FreeSWITCH-based PBX-systems directly? * Should I not simply buy a used Avaya-system like this: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110450339950&_trksid=p27… What will I gain and what will I lose (other than personal satisfaction, of course) by going that route instead of building my own box? Thanks a lot! Yours, -mi

1 0

No RTP destination auto-correction
by mayamatakeshi 28 Oct '09

28 Oct '09

I'm seeing a strange issue with eyebeam behind NAT. If I make a call from eyebeam to FS, I can see FS receives packets from eyebeam's nat address (confirmed with tcpdump and mod_event_socket DTMF) but it doesn't change the RTP destination to the source of those packets and sends the packets to the private address advertised in the SDP. However, if I do hold/unhold and send some digits, FS logs "Auto Changing port from X to Y" and starts to send the packets to the correct address. This always work after a hold/unhold + digits but never happen just after the first INVITE transaction. Also, I don't see the problem if eyebeam receives a call from FS. Has anyone seen this? br, takeshi

3 3

SIP UPDATE Method
by DJB 28 Oct '09

28 Oct '09

I am wondering why after I update to trunk-15225, the Allow: UPDATE method is no longer there. User-Agent: FreeSWITCH-mod_sofia/1.0.trunk-15225 Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Am I missing something here? Thank you.

2 8

Re: [Freeswitch-users] [Freeswitch-dev] Build Issue
by Brian West 28 Oct '09

28 Oct '09

Clean and build again... the issue was files.freeswitch.org was having a little drama so I suspect it didn't download everything properly? /b On Oct 28, 2009, at 9:40 AM, Suneel Papineni wrote: > Hi, > > Just now I have downloaded SVN version of FreeSwitch from http://svn.freeswitch.org/svn/freeswitch/trunk/ > . > > Tried to build the solution (Freeswitch.2008.sln ) using, but it > thrown many fatal errors(C1083) and some warnings. Please find > below the list of errors and warnings. > > Could anyone let me know where I made mistake and source to get > these missing files. > > Thanks & Regards > Suneel > > > Warning 1 warning C4018: '<' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\libs > \pcre\pcre_ucp_searchfuncs.c 158 libpcre > Warning 2 warning C4018: '<=' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\libs > \pcre\pcre_ucp_searchfuncs.c 163 libpcre > Warning 3 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > libteletone > Error 4 fatal error C1083: Cannot open source > file: '..\..\pthreads-w32-2-7-0-release\pthread.c': No such file or > directory c1 pthread > Warning 5 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey > Error 6 fatal error C1083: Cannot open source > file: '..\..\mpg123\src\libmpg123\dct64.c': No such file or > directory c1 libmpg123 > Error 7 fatal error C1083: Cannot open source > file: '..\..\mpg123\src\libmpg123\decode.c': No such file or > directory c1 libmpg123 > Error 8 fatal error C1083: Cannot open source > file: '..\..\mpg123\src\libmpg123\decode_2to1.c': No such file or > directory c1 libmpg123 > Error 9 fatal error C1083: Cannot open source > file: '..\..\mpg123\src\libmpg123\decode_4to1.c': No such file or > directory c1 libmpg123 > Error 10 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\decode_ntom.c': No such file or > directory c1 libmpg123 > Error 11 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\equalizer.c': No such file or > directory c1 libmpg123 > Error 12 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\format.c': No such file or > directory c1 libmpg123 > Error 13 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\frame.c': No such file or > directory c1 libmpg123 > Error 14 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\icy.c': No such file or > directory c1 libmpg123 > Error 15 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\icy2utf8.c': No such file or > directory c1 libmpg123 > Error 16 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\id3.c': No such file or > directory c1 libmpg123 > Error 17 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\layer1.c': No such file or > directory c1 libmpg123 > Error 18 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\layer2.c': No such file or > directory c1 libmpg123 > Error 19 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\layer3.c': No such file or > directory c1 libmpg123 > Error 20 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\libmpg123.c': No such file or > directory c1 libmpg123 > Error 21 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\optimize.c': No such file or > directory c1 libmpg123 > Error 22 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\parse.c': No such file or > directory c1 libmpg123 > Error 23 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\readers.c': No such file or > directory c1 libmpg123 > Error 24 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\stringbuf.c': No such file or > directory c1 libmpg123 > Error 25 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\tabinit.c': No such file or > directory c1 libmpg123 > Error 26 fatal error C1083: Cannot open source file: > '..\..\mpg123\src\libmpg123\compat.c': No such file or > directory c1 libmpg123 > Error 27 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\httpp\httpp.c': No such file or > directory c1 libshout > Error 28 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\mp3.c': No such file or directory > c1 libshout > Error 29 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\ogg.c': No such file or directory > c1 libshout > Error 30 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\net\resolver.c': No such file or > directory c1 libshout > Error 31 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\shout.c': No such file or directory > c1 libshout > Error 32 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\net\sock.c': No such file or > directory c1 libshout > Error 33 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\thread\thread.c': No such file or > directory c1 libshout > Error 34 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\timing\timing.c': No such file or > directory c1 libshout > Error 35 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\util.c': No such file or directory > c1 libshout > Error 36 fatal error C1083: Cannot open source file: > '..\..\libshout-2.2.2\src\avl\avl.c': No such file or directory > c1 libshout > Error 37 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\bitstream.c': No such file or > directory c1 libmp3lame > Error 38 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\version.c': No such file or > directory c1 libmp3lame > Error 39 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\VbrTag.c': No such file or > directory c1 libmp3lame > Error 40 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\vbrquantize.c': No such file or > directory c1 libmp3lame > Error 41 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\util.c': No such file or > directory c1 libmp3lame > Error 42 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\takehiro.c': No such file or > directory c1 libmp3lame > Error 43 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\set_get.c': No such file or > directory c1 libmp3lame > Error 44 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\reservoir.c': No such file or > directory c1 libmp3lame > Error 45 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\quantize_pvt.c': No such file or > directory c1 libmp3lame > Error 46 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\quantize.c': No such file or > directory c1 libmp3lame > Error 47 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\psymodel.c': No such file or > directory c1 libmp3lame > Error 48 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\presets.c': No such file or > directory c1 libmp3lame > Error 49 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\newmdct.c': No such file or > directory c1 libmp3lame > Error 50 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\mpglib_interface.c': No such file or > directory c1 libmp3lame > Error 51 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\lame.c': No such file or > directory c1 libmp3lame > Error 52 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\id3tag.c': No such file or > directory c1 libmp3lame > Error 53 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\gain_analysis.c': No such file or > directory c1 libmp3lame > Error 54 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\fft.c': No such file or > directory c1 libmp3lame > Error 55 fatal error C1083: Cannot open source file: > '..\..\lame-3.97\libmp3lame\encoder.c': No such file or > directory c1 libmp3lame > Error 56 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\Office > \Projects\Freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_alloc_lock.c 40 libsofia_sip_ua_static > Error 57 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 58 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\Office > \Projects\Freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_log.c 46 libsofia_sip_ua_static > Error 59 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 60 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 61 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\Office > \Projects\Freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_root.c 46 libsofia_sip_ua_static > Error 62 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 63 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 64 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\Office > \Projects\Freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_uniqueid.c 85 libsofia_sip_ua_static > Error 65 fatal error C1083: Cannot open include file: > 'pthread.h': No such file or directory d:\office > \projects\freeswitch\libs\sofia-sip\libsofia-sip-ua\su > \su_port.h 547 libsofia_sip_ua_static > Error 66 error BK1506 : cannot open file '.\Debug > \su_alloc_lock.sbr': No such file or directory > BSCMAKE libsofia_sip_ua_static > Warning 67 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl esl > Error 68 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\au_none.c': No such file or > directory c1 flite > Error 69 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\au_streaming.c': No such file or > directory c1 flite > Error 70 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\au_wince.c': No such file or > directory c1 flite > Error 71 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\audio.c': No such file or > directory c1 flite > Error 72 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\auserver.c': No such file or > directory c1 flite > Error 73 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_lex.c': No such file or > directory c1 flite > Error 74 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_lex_data.c': No such file or > directory c1 flite > Error 75 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_lex_entries.c': No such file or > directory c1 flite > Error 76 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_lts_model.c': No such file or > directory c1 flite > Error 77 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_lts_rules.c': No such file or > directory c1 flite > Error 78 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmulex\cmu_postlex.c': No such file or > directory c1 flite > Error 79 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_time_awb\cmu_time_awb_cart.c': No such > file or directory c1 flite > Error 80 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_time_awb\cmu_time_awb_clunits.c': No > such file or directory c1 flite > Error 81 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_time_awb\cmu_time_awb_lex_entry.c': No > such file or directory c1 flite > Error 82 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_time_awb\cmu_time_awb_lpc.c': No such > file or directory c1 flite > Error 83 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_time_awb\cmu_time_awb_mcep.c': No such > file or directory c1 flite > Error 84 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_kal\cmu_us_kal.c': No such file or > directory c1 flite > Error 85 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_kal\cmu_us_kal_diphone.c': No such > file or directory c1 flite > Error 86 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_kal\cmu_us_kal_lpc.c': No such file > or directory c1 flite > Error 87 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_kal\cmu_us_kal_res.c': No such file > or directory c1 flite > Error 88 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_kal\cmu_us_kal_residx.c': No such > file or directory c1 flite > Error 89 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_alloc.c': No such file or > directory c1 flite > Error 90 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_args.c': No such file or > directory c1 flite > Error 91 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\stats\cst_cart.c': No such file or > directory c1 flite > Error 92 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\cg\cst_cg.c': No such file or directory > c1 flite > Error 93 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_clunits.c': No such file or > directory c1 flite > Error 94 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_diphone.c': No such file or > directory c1 flite > Error 95 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_endian.c': No such file or > directory c1 flite > Error 96 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_error.c': No such file or > directory c1 flite > Error 97 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_features.c': No such file or > directory c1 flite > Error 98 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\hrg\cst_ffeature.c': No such file or > directory c1 flite > Error 99 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\cst_ffeatures.c': No such file or > directory c1 flite > Error 100 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_file_stdio.c': No such file or > directory c1 flite > Error 101 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\hrg\cst_item.c': No such file or > directory c1 flite > Error 102 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\lexicon\cst_lexicon.c': No such file or > directory c1 flite > Error 103 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_lpcres.c': No such file or > directory c1 flite > Error 104 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\lexicon\cst_lts.c': No such file or > directory c1 flite > Error 105 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\lexicon\cst_lts_rewrites.c': No such file or > directory c1 flite > Error 106 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\cg\cst_mlpg.c': No such file or > directory c1 flite > Error 107 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\cg\cst_mlsa.c': No such file or > directory c1 flite > Error 108 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_mmap_win32.c': No such file or > directory c1 flite > Error 109 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\cst_phoneset.c': No such file or > directory c1 flite > Error 110 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_reflpc.c': No such file or > directory c1 flite > Error 111 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\regex\cst_regex.c': No such file or > directory c1 flite > Error 112 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\hrg\cst_rel_io.c': No such file or > directory c1 flite > Error 113 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\hrg\cst_relation.c': No such file or > directory c1 flite > Error 114 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_sigpr.c': No such file or > directory c1 flite > Error 115 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_socket.c': No such file or > directory c1 flite > Error 116 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\stats\cst_ss.c': No such file or > directory c1 flite > Error 117 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_string.c': No such file or > directory c1 flite > Error 118 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_sts.c': No such file or > directory c1 flite > Error 119 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\cst_synth.c': No such file or > directory c1 flite > Error 120 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_tokenstream.c': No such file or > directory c1 flite > Error 121 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_track.c': No such file or > directory c1 flite > Error 122 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_track_io.c': No such file or > directory c1 flite > Error 123 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\wavesynth\cst_units.c': No such file or > directory c1 flite > Error 124 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\cst_utt_utils.c': No such file or > directory c1 flite > Error 125 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\hrg\cst_utterance.c': No such file or > directory c1 flite > Error 126 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_val.c': No such file or > directory c1 flite > Error 127 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_val_const.c': No such file or > directory c1 flite > Error 128 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\utils\cst_val_user.c': No such file or > directory c1 flite > Error 129 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\cg\cst_vc.c': No such file or directory > c1 flite > Error 130 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\stats\cst_viterbi.c': No such file or > directory c1 flite > Error 131 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\cst_voice.c': No such file or > directory c1 flite > Error 132 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_wave.c': No such file or > directory c1 flite > Error 133 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_wave_io.c': No such file or > directory c1 flite > Error 134 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\cst_wave_utils.c': No such file or > directory c1 flite > Error 135 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\synth\flite.c': No such file or > directory c1 flite > Error 136 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\speech\rateconv.c': No such file or > directory c1 flite > Error 137 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\regex\regexp.c': No such file or > directory c1 flite > Error 138 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\regex\regsub.c': No such file or > directory c1 flite > Error 139 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_aswd.c': No such file or > directory c1 flite > Error 140 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_dur_stats.c': No such file or > directory c1 flite > Error 141 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_durz_cart.c': No such file or > directory c1 flite > Error 142 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_expand.c': No such file or > directory c1 flite > Error 143 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_f0_model.c': No such file or > directory c1 flite > Error 144 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_f0lr.c': No such file or > directory c1 flite > Error 145 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_ffeatures.c': No such file or > directory c1 flite > Error 146 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_gpos.c': No such file or > directory c1 flite > Error 147 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_int_accent_cart.c': No such > file or directory c1 flite > Error 148 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_int_tone_cart.c': No such file > or directory c1 flite > Error 149 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_nums_cart.c': No such file or > directory c1 flite > Error 150 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_phoneset.c': No such file or > directory c1 flite > Error 151 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_phrasing_cart.c': No such file > or directory c1 flite > Error 152 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\us_text.c': No such file or > directory c1 flite > Error 153 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\usenglish\usenglish.c': No such file or > directory c1 flite > Error 154 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt.c': No such file or > directory c1 flite > Error 155 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg.c': No such file > or directory c1 flite > Error 156 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg_durmodel.c': No > such file or directory c1 flite > Error 157 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg_f0_trees.c': No > such file or directory c1 flite > Error 158 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg_mcep_trees.c': No > such file or directory c1 flite > Error 159 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg_params.c': No such > file or directory c1 flite > Error 160 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_slt\cmu_us_slt_cg_phonestate.c': No > such file or directory c1 flite > Error 161 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb.c': No such file or > directory c1 flite > Error 162 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg.c': No such file > or directory c1 flite > Error 163 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg_durmodel.c': No > such file or directory c1 flite > Error 164 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg_f0_trees.c': No > such file or directory c1 flite > Error 165 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg_mcep_trees.c': No > such file or directory c1 flite > Error 166 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg_params.c': No such > file or directory c1 flite > Error 167 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_awb\cmu_us_awb_cg_phonestate.c': No > such file or directory c1 flite > Error 168 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms.c': No such file or > directory c1 flite > Error 169 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg.c': No such file > or directory c1 flite > Error 170 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg_durmodel.c': No > such file or directory c1 flite > Error 171 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg_f0_trees.c': No > such file or directory c1 flite > Error 172 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg_mcep_trees.c': No > such file or directory c1 flite > Error 173 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg_params.c': No such > file or directory c1 flite > Error 174 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\lang\cmu_us_rms\cmu_us_rms_cg_phonestate.c': No > such file or directory c1 flite > Error 175 fatal error C1083: Cannot open source file: > '..\..\flite-1.3.99\src\audio\au_command.c': No such file or > directory c1 flite > Warning 176 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_fax > Warning 177 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_lcr > Warning 178 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_pocketsphinx > Warning 179 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey_curl > Warning 180 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_fsv > Warning 181 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_voipcodecs > Warning 182 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_tone_stream > Warning 183 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_cdr_csv > Warning 184 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_logfile > Warning 185 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_dialplan_asterisk > Warning 186 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_expr > Warning 187 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_fifo > Warning 188 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_nl > Warning 189 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_it > Warning 190 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_fr > Warning 191 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_es > Warning 192 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_de > Warning 193 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_voicemail > Warning 194 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey_socket > Warning 195 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_local_stream > Warning 196 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_esf > Warning 197 warning C4244: 'function' : > conversion from 'int' to 'uint8_t', possible loss of > data d:\Office\Projects\Freeswitch\src\mod > \applications\mod_esf\mod_esf.c 139 mod_esf > Warning 198 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_h26x > Warning 199 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_amr > Warning 200 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_xml_cdr > Warning 201 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_en > Warning 202 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_xml_curl > Warning 203 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey_odbc > Warning 204 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_enum > Warning 205 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_easyroute > Warning 206 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey_teletone > Warning 207 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_spidermonkey_core_db > Warning 208 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_native_file > Warning 209 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_g723_1 > Warning 210 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl fs_cli > Warning 211 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_siren > Warning 212 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_sofia > Warning 213 warning C4018: '>' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\src > \mod\endpoints\mod_sofia\sofia.c 2145 mod_sofia > Warning 214 warning C4018: '<' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\src > \mod\endpoints\mod_sofia\sofia.c 2145 mod_sofia > Warning 215 warning C4018: '>' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\src > \mod\endpoints\mod_sofia\sofia.c 2832 mod_sofia > Warning 216 warning C4018: '<' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\src > \mod\endpoints\mod_sofia\sofia.c 2832 mod_sofia > Warning 217 warning C4702: unreachable > code d:\office\projects\freeswitch\src\mod\endpoints > \mod_sofia\sofia.c 4005 mod_sofia > Error 218 fatal error LNK1181: cannot open input file > '..\..\..\..\libs\win32\sofia\debug > \libsofia_sip_ua_static.lib' mod_sofia > mod_sofia > Error 219 fatal error C1083: Cannot open include file: > 'os.h': No such file or directory d:\Office\Projects > \Freeswitch\libs\win32\libshout\shout\shout.h 26 > mod_shout > Warning 220 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_snom > Warning 221 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_zh > Warning 222 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_managed > Warning 223 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_vmd > Warning 224 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_file_string > Warning 225 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_nibblebill > Warning 226 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_say_ru > Warning 227 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_limit > Warning 228 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_event_socket > Warning 229 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_dptools > Warning 230 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_conference > Warning 231 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_rss > Warning 232 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_xml_rpc > Warning 233 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_console > Warning 234 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_commands > Warning 235 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_dingaling > Warning 236 warning C4018: '<' : signed/ > unsigned mismatch d:\Office\Projects\Freeswitch\src > \mod\endpoints\mod_dingaling\mod_dingaling.c 2326 > mod_dingaling > Warning 237 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_ilbc > Warning 238 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_loopback > Warning 239 warning C4189: 'code' : local > variable is initialized but not referenced d:\Office > \Projects\Freeswitch\src\mod\languages\mod_lua\mod_lua.cpp > 393 mod_lua > Warning 240 warning C4101: 'error' : > unreferenced local variable d:\Office\Projects > \Freeswitch\src\mod\languages\mod_lua\mod_lua.cpp 395 > mod_lua > Warning 241 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_event_multicast > Warning 242 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_zeroconf > Warning 243 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_dialplan_directory > Warning 244 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_ldap > Warning 245 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_dialplan_xml > Warning 246 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_speex > Warning 247 warning LNK4075: ignoring '/ > EDITANDCONTINUE' due to '/INCREMENTAL:NO' > specification libspeexdsp.lib mod_speex > Warning 248 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_PortAudio > Warning 249 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_iax > Warning 250 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_sndfile > Warning 251 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl mod_g729 > Warning 252 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > mod_valet_parking > Warning 253 Command line warning D9040 : > ignoring option '/analyze'; Code Analysis warnings are not available > in this edition of the compiler cl > FreeSwitchConsole > ************************************************************************* > Please consider the environment before printing this e-mail > ************************************************************************* > This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they > are addressed. If you have received this email in error please notify > the system manager. http://www.mettoni.com > > Mettoni Ltd > Registered in England and Wales: 4485956 > 9400 Garsington Road, Oxford Business Park, Oxford, OX4 2HN > ************************************************************************* > _______________________________________________ > FreeSWITCH-dev mailing list > FreeSWITCH-dev(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev > http://www.freeswitch.org

1 0

Re: [Freeswitch-users] How to stop the playback files
by Delian Tashev 28 Oct '09

28 Oct '09

Hello Velusamy! You may also be interested in using the method: http://wiki.freeswitch.org/wiki/Mod_lua#session:playAndGetDigits It play a file, gets DTMFs and can be terminated if the maximum number of digits is reached (i.e. 1 digit). Delian Tashev -----Original Message----- From: Brian West [mailto:brian@freeswitch.org] Sent: Wednesday, October 28, 2009 10:57 To: freeswitch-users(a)lists.freeswitch.org Subject: Re: [Freeswitch-users] How to stop the playback files http://wiki.freeswitch.org/wiki/Channel_Variables#playback_terminators Are you using sync or async socket? /b On Oct 28, 2009, at 3:29 AM, velusamy velu wrote: > Dear All, > I have played the list of voice files in playback like the > following by using ESL perl module, > > $conn->execute("set","playback_delimiter=!"); > $conn->execute("set","playback_sleep_val=100"); > $conn->playback($sound_path."ivr/ivr-welcome_to_freeswitch.wav!ivr/ > ivr-this_ivr_will_let_you_test_features.wav!ivr/ivr- > you_may_exit_by_hanging_up.wav"); > > In a loop I am checking the DTMF event, if that event comes I > should stop the above palyback. How can I do it? > > Regards, > Velusamy. > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- > users > http://www.freeswitch.org

1 0

db
by srinivasula reddy 28 Oct '09

28 Oct '09

Hi, can i use sqlserver instead of sqllite. and can two freeswitch servers can share same database(sqllite or sqlserver). any help would be great. Thanks Srinivasula Reddy K

2 1

How to stop the playback files
by velusamy velu 28 Oct '09

28 Oct '09

Dear All, I have played the list of voice files in playback like the following by using ESL perl module, $conn->execute("set","playback_delimiter=!"); $conn->execute("set","playback_sleep_val=100"); $conn->playback($sound_path."ivr/ivr-welcome_to_freeswitch.wav!ivr/ivr-this_ivr_will_let_you_test_features.wav!ivr/ivr-you_may_exit_by_hanging_up.wav"); In a loop I am checking the DTMF event, if that event comes I should stop the above palyback. How can I do it? Regards, Velusamy.

2 2

Fwd: mod_opal - call charged before H.225 connect
by Tihomir Culjaga 28 Oct '09

28 Oct '09

the e-mail bounced back .. don't know whether you received this... here are the results! Outbound calls: SIP_user(1001) => FS => H323_SoftSwitch: http://pastebin.freeswitch.org/10672 i get coredumps but this might be because i'm missing the bridge format.... what i'm using is: <action application="bridge" data="h323/0$1@${NCX_IP}"/> that can be wrong :) Please advice here. Inbound Calls: openPhone => FS => SIP_user(1001): http://pastebin.freeswitch.org/10671 the call went in, hit a registered sip user (1001) and the phone started ringing. The phone answered the call but no audio can be heared (i see RTP from the SIP uset towards FS). Also, the openPhone never receives H.225 connect nor any OLC before connect. After some time, the H323 leg constates the user never answered and releases the call with cause 19. this is the h323.config.xml tculjaga@subZero:~$ cat /usr/local/freeswitch/conf/autoload_configs/h323.conf.xml <configuration name="h323.conf" description="H323 Endpoints"> <settings> <param name="trace-level" value="10"/> <param name="context" value="default"/> <param name="dialplan" value="XML"/> <param name="codec-prefs" value="PCMA,GSM,G729,G726"/> <param name="gk-address" value=""/>  <param name="gk-identifer" value=""/>  <param name="gk-interface" value=""/>  </settings> <listeners> <listener name="default"> <param name="h323-ip" value="10.4.62.7"/> <param name="h323-port" value="1720"/> </listener> </listeners> </configuration> and this is a dialplan for outgoing that i'm using <include> <extension name="EMERGENCY"> <condition field="destination_number" expression="^0(112|9[23456])$"> <action application="set" data="effective_caller_id_number=1001282122"/> <action application="set" data="NCX_IP=10.4.4.254"/> <action application="set" data="call_timeout=30"/> <action application="set" data="hangup_after_bridge=true"/>  <action application="bridge" data="h323/0$1@${NCX_IP}"/> </condition> </extension> <extension name="SPECIAL_SERVICES"> <condition field="destination_number" expression="^0(9[01789]\d{3,4})$"> <action application="set" data="effective_caller_id_number=1001282122"/> <action application="set" data="NCX_IP=10.4.4.254"/> <action application="set" data="call_timeout=30"/> <action application="set" data="hangup_after_bridge=true"/>  <action application="bridge" data="h323/0$1@${NCX_IP}"/> </condition> </extension> <extension name="ENYTHING_ELSE"> <condition field="destination_number" expression="^0([2-8]\d{6,7}|0[1-9]\d{7,8}|00[1-9]\d{8,16})$"> <action application="set" data="effective_caller_id_number=1001282122"/> <action application="set" data="NCX_IP=10.4.4.254"/> <action application="set" data="call_timeout=30"/> <action application="set" data="hangup_after_bridge=true"/>  <action application="bridge" data="h323/0$1@${NCX_IP}"/> </condition> </extension> </include> P.S.: sorry for the attached rar, but don't know how to upload it to pastebin :P T. 2009/10/12 Tihomir Culjaga <tculjaga(a)gmail.com> hi, > > finally i compiled it right ... had a stupid issue with ekiga and wrong > ptlib in place... > > anyhow, i loaded the module and will continue the tests tomorrow ...first > thing i arrive in my office :P > > > > freeswitch@subZero> > freeswitch@subZero> > API CALL [console(loglevel 7)] output: > +OK console log level set to DEBUG > > freeswitch@subZero> load mod_h323 > 2009-10-12 23:38:09.509279 [CONSOLE] mod_h323.cpp:93 Starting loading > mod_h323 > 2009-10-12 23:38:09.511413 [DEBUG] mod_h323.cpp:461 Created Listener > 'default' > 2009-10-12 23:38:09.511413 [DEBUG] mod_h323.cpp:305 Config capabilliti > PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.511413 [DEBUG] mod_h323.cpp:309 Find capabilliti PCMU > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.511413 [DEBUG] mod_h323.cpp:309 Find capabilliti PCMA > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.511413 [DEBUG] h323caps.cxx:3264 FindCapability: > "G.711-uLaw-64k{sw}" > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:3176 Added capability: > G.711-uLaw-64k <1> > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:3264 FindCapability: > "G.711-uLaw-64k{sw}" > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:3264 FindCapability: > "G.711-uLaw-64k{sw}" > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:3264 FindCapability: > "G.711-uLaw-64k{sw}" > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:3264 FindCapability: > "G.711-uLaw-64k{sw}" > 2009-10-12 23:38:09.512480 [DEBUG] h323caps.cxx:1989 No Extended > Capabilities found to load > 2009-10-12 23:38:09.512480 [DEBUG] mod_h323.cpp:325 H.323 added 1 > capabilities 'G.711-uLaw-64k*{sw}' > 2009-10-12 23:38:09.512480 [DEBUG] mod_h323.cpp:309 Find capabilliti gsm to > PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti msgsm > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti speex > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti lpc10 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti ilbc20 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti ilbc30 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g723 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g726 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g728 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g729b > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g729 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti slin > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g729a > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.513529 [DEBUG] mod_h323.cpp:309 Find capabilliti g729ab > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti g723.1 > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g723.1-5k3 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g723.1a-5k3 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g723.1a-6k3 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g723.1a-6k3-cisco to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g726-16 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g726-24 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g726-32 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > g726-40 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti ilbc > to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > speex-18k2 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > speex-15k to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.514615 [DEBUG] mod_h323.cpp:309 Find capabilliti > speex-11k to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.515708 [DEBUG] mod_h323.cpp:309 Find capabilliti > speex-8k to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.515708 [DEBUG] mod_h323.cpp:309 Find capabilliti > speex-5k95 to PCMA,GSM,G729,G726 > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/hookflash <2> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/basicString <3> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/dtmf <4> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/RFC2833 <5> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/Navigation <6> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/Softkey <7> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/PointDevice <8> > 2009-10-12 23:38:09.515708 [DEBUG] h323caps.cxx:3176 Added capability: > UserInput/Modal <9> > 2009-10-12 23:38:09.516760 [DEBUG] osutil.cxx:188 File handle high water > mark set: 44 PTCPSocket > 2009-10-12 23:38:09.516760 [DEBUG] h323ep.cxx:1995 Started listener > Listener[ip$10.4.62.7:1720] > 2009-10-12 23:38:09.516760 [DEBUG] tlibthrd.cxx:547 Thread high water mark > set: 3 > 2009-10-12 23:38:09.516760 [CONSOLE] mod_h323.cpp:108 Opal manager > initialized and running > 2009-10-12 23:38:09.516760 [DEBUG] tlibthrd.cxx:454 Started thread > 0xb75e0f18 H323 Listener:b5c98b90 > 2009-10-12 23:38:09.516760 [CONSOLE] switch_loadable_module.c:889 > Successfully Loaded [mod_h323] > 2009-10-12 23:38:09.516760 [NOTICE] switch_loadable_module.c:142 Adding > Endpoint 'h323' > API CALL [load(mod_h323)] output: > +OK > > 2009-10-12 23:38:09.516760 [DEBUG] transports.cxx:1521 Awaiting TCP > connections on port 1720 > 2009-10-12 23:38:09.517832 [DEBUG] transports.cxx:1475 Waiting on socket > accept on ip$10.4.62.7:1720 > 2009-10-12 23:38:09.517832 [DEBUG] tlibthrd.cxx:1023 > PThread::PXBlockOnIO(44,2) > freeswitch@subZero> > > > BTW: to compile everytihng, I used FS trunk, ptlib 2.7.1 and h323plus > 1.22.0 > > Will let you know the results asap. > > > T. > > > > 2009/10/12 Georgiewskiy Yuriy <bottleman(a)icf.org.ru> > >> On 2009-10-12 18:03 +0200, Tihomir Culjaga wrote >> freeswitch-users(a)lists.fre...: >> >> i already write this, ptlib 2.6.5, tou can find link to it on >> oplalvoip.org, h32plus latest CVS version, >> you can find it on www.h323plus.org. >> >> TC>hi, >> TC> >> TC>can't make it... >> TC> >> TC>subZero:~/freeswitch-trunk$ make mod_h323 >> TC> >> TC>making all mod_h323 >> TC>Compiling mod_h323.cpp... >> TC>quiet_libtool: compile: g++ -g -ggdb -I/usr/local/include/ptlib >> TC>-I/usr/local/include/openh323 -I. -DPTRACING=1 -D_REENTRANT >> -fno-exceptions >> TC>-I/home/tculjaga/freeswitch-trunk/src/include >> TC>-I/home/tculjaga/freeswitch-trunk/libs/libteletone/src -fPIC >> TC>-fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g >> -O2 >> TC>-D_GNU_SOURCE -DHAVE_CONFIG_H -c mod_h323.cpp -fPIC -DPIC -o >> TC>.libs/mod_h323.o >> TC>In file included from /usr/local/include/openh323/h323.h:493, >> TC> from mod_h323.h:8, >> TC> from mod_h323.cpp:3: >> TC>/usr/local/include/openh323/h323ep.h: In member function ЪЪЪЪЪЪvirtual >> void >> TC>NATFactoryStartup::OnShutdown()ЪЪЪЪЪЪ: >> TC>/usr/local/include/openh323/h323ep.h:2731: error: >> ЪЪЪЪЪЪNatFactoryЪЪЪЪЪЪ has not >> TC>been declared >> TC>make[4]: *** [mod_h323.lo] Error 1 >> TC>make[3]: *** [all] Error 1 >> TC>make[2]: *** [mod_h323-all] Error 1 >> TC>make[1]: *** [mod_h323] Error 2 >> TC>make: *** [mod_h323] Error 2 >> TC> >> TC> >> TC> >> TC>what exact ptlib and h323plus versions did you use? .. can you send us >> a >> TC>link so we can use the exact ones. >> TC> >> TC> >> TC>T. >> TC> >> TC>2009/10/12 Georgiewskiy Yuriy <bottleman(a)icf.org.ru> >> TC> >> TC>> On 2009-10-12 09:43 -0500, Brian West wrote >> TC>> freeswitch-users(a)lists.freeswit...: >> TC>> >> TC>> BW>We can host this in our SVN if you wish? >> TC>> >> TC>> If in fs svn i think yes. But i think may be little time later? >> TC>> i don't known is it builds on trunk because i develop it on 1.0.4. >> TC>> >> TC>> BW>/b >> TC>> BW> >> TC>> BW>On Oct 12, 2009, at 8:31 AM, Georgiewskiy Yuriy wrote: >> TC>> BW> >> TC>> BW>> ftp://srv.icf.org.ru/pub/soft/f/freeswitch/mod_h323/ alfa code, >> but >> TC>> seems >> TC>> BW>> it work, but should be buggy, >> TC>> BW>> to build need libpt 2.6.5 and h323plus cvs version, i test it >> now on >> TC>> fs >> TC>> BW>> 1.0.4. >> TC>> BW> >> TC>> >> TC>> C уважением With Best Regards >> TC>> Георгиевский Юрий. Georgiewskiy Yuriy >> TC>> +7 4872 711666 +7 4872 711666 >> TC>> факс +7 4872 711143 fax +7 4872 711143 >> TC>> Компания ООО "Ай Ти Сервис" IT Service Ltd >> TC>> http://nkoort.ru http://nkoort.ru >> TC>> JID: GHhost(a)jabber.tula-ix.net.ru JID: GHhost(a)jabber.tula-ix.net.ru >> TC>> YG129-RIPE YG129-RIPE >> TC>> >> TC>> _______________________________________________ >> TC>> FreeSWITCH-users mailing list >> TC>> FreeSWITCH-users(a)lists.freeswitch.org >> TC>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> TC>> UNSUBSCRIBE: >> http://lists.freeswitch.org/mailman/options/freeswitch-users >> TC>> http://www.freeswitch.org >> TC>> >> TC>> >> TC> >> >> C уважением With Best Regards >> Георгиевский Юрий. Georgiewskiy Yuriy >> +7 4872 711666 +7 4872 711666 >> факс +7 4872 711143 fax +7 4872 711143 >> Компания ООО "Ай Ти Сервис" IT Service Ltd >> http://nkoort.ru http://nkoort.ru >> JID: GHhost(a)jabber.tula-ix.net.ru JID: GHhost(a)jabber.tula-ix.net.ru >> YG129-RIPE YG129-RIPE >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >

4 57

Channel variables not being set when FS calls user
by mayamatakeshi 28 Oct '09

28 Oct '09

Hello, in this page http://wiki.freeswitch.org/wiki/XML_User_Directory_Guide we can read: ============================= Variables: Any variables defined in the domain or user will be defined as channel variables when there is a call to user or when there is an inbound calls from that user. ============================= I can see the channel variables are set when there is an incoming call from the user, but not when FS sends a call to the user. Can someone confirm what is the expected behavior? br, takeshi

2 2