- FreeSWITCH-users - FreeSWITCH Mailing Lists

list all users
by Brian May 21 Feb '10

21 Feb '10

Hello, How do I get a list of all users? Including users that are not registered yet? (note: I have already changed the domain to microcomaustralia.com.au) I have tried: freeswitch@voyage> user_exists brian(a)microcomaustralia.com.au false i believe this user should be defined in conf/directory/default/brian.xml, however it is like nothing in conf/directory/default.xml is being read. I want to prove if this is the case or not. When I try to register I get this error: 2010-02-21 13:09:02.568081 [WARNING] sofia_reg.c:1019 SIP auth failure (REGISTER) on sofia profile 'internal' for [brian(a)microcomaustralia.com.au] from ip 192.168.87.14 which I think might be because it can't find the matching user entry. Thanks -- Brian May <brian(a)microcomaustralia.com.au>

3 12

ASTPP For FreeSWITCH
by Michael Collins 21 Feb '10

21 Feb '10

Hey all, Here's a quick story <http://www.freeswitch.org/node/239> about ASTPP and FreeSWITCH. If you are using ASTPP with FreeSWITCH please let me know how it works. I didn't see any information on our wiki about ASTPP. If ASTPP is viable then we should document it as best we can. Thanks! -Michael

3 4

codec negociations
by Madovsky 21 Feb '10

21 Feb '10

Hi, is it possible for FS to take the callee codec from an interant call to external as reference ? example: userA (with only GSM) from FS calls whoeverUser@whateverdomain, this whoeverUser has only PCMU codec, so FS has a list of GSM,PCMU,PCMA and so starts to transcode from PCMU to GSM. I succeed to do the contrary (it transcodes from external to internal phone) Thanks Franck

1 0

openzap TDM400 card
by Brian May 21 Feb '10

21 Feb '10

Hello, I think I have the config correct, and not confused FXO/FXS anywhere. voyage:/opt/freeswitch/conf# ztcfg -vv Zaptel Version: 1.4.11 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. voyage:/opt/freeswitch/conf# cat openzap.conf [span zt FXO1] name => OpenZAP-FXO1 number => 1 fxo-channel => 1 [span zt FXO2] name => OpenZAP-FXO2 number => 2 fxo-channel => 2 [span zt FXS1] name => OpenZAP-FXS1 number => 3 fxs-channel => 3 [span zt FXS2] name => OpenZAP-FXS2 number => 4 fxs-channel => 4 voyage:/opt/freeswitch/conf# cat autoload_configs/openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/>    </settings>  <analog_spans> <span id="1"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-analog-option" value="3-way"/>  </span> <span id="2"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-analog-option" value="3-way"/>  </span> <span id="3"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span id="4"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </analog_spans> </configuration> freeswitch@voyage> reload mod_openzap 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:464 Deleting Endpoint 'openzap' 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:545 Deleting Application 'disable_ec' 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:572 Deleting API Function 'oz' 2010-02-20 16:45:53.312813 [CONSOLE] switch_loadable_module.c:1277 Stopping: mod_openzap 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:1:1 fd:36 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:2:1 fd:40 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:3:1 fd:41 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:4:1 fd:42 2010-02-20 16:45:53.612813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2694 Unloading /opt/freeswitch/mod/ozmod_analog.so 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2679 Unloading IO zt 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2694 Unloading /opt/freeswitch/mod/ozmod_zt.so 2010-02-20 16:45:54.322813 [CONSOLE] switch_loadable_module.c:1297 mod_openzap unloaded. 2010-02-20 16:45:54.322813 [NOTICE] zap_io.c:2778 Modules configured: 1 2010-02-20 16:45:54.322813 [NOTICE] ozmod_zt.c:1161 Using Zaptel control device 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2579 Loading IO from /opt/freeswitch/mod/ozmod_zt.so [zt] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:556 Setting rxgain val to 0.000000 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:565 Setting txgain val to 0.000000 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2379 auto-loaded 'zt' 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 1 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:36 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 2 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 2 as OpenZAP device 2:1 fd:40 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 3 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 3 as OpenZAP device 3:1 fd:41 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 4 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 4 as OpenZAP device 4:1 fd:42 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2502 Configured 4 channel(s) 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2596 Loading SIG from /opt/freeswitch/mod/ozmod_analog.so 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2712 auto-loaded 'analog' 2010-02-20 16:45:54.358813 [CONSOLE] switch_loadable_module.c:900 Successfully Loaded [mod_openzap] 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:144 Adding Endpoint 'openzap' 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:250 Adding Application 'disable_ec' 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:272 Adding API Function 'oz' +OK module unloaded +OK module loaded freeswitch@voyage> oz list +OK span: 1 (FXO1) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options 3way +OK span: 2 (FXO2) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options 3way +OK span: 3 (FXS1) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none +OK span: 4 (FXS2) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none Yet, when I lift the handset on port 1 or port 2 I don't get a dial tone :-( Instead I get this message: 2010-02-20 16:52:26.332813 [INFO] ozmod_zt.c:640 Setting echo cancel to 64 taps for 2:1 2010-02-20 16:52:26.332813 [ERR] zap_io.c:1599 I/O backend does not support command 24! Am I doing something wrong? -- Brian May <brian(a)microcomaustralia.com.au>

4 6

outbound calls
by Madovsky 21 Feb '10

21 Feb '10

Hello, I'm able to transcode a cal between 2 local legs, but when a local user call an oubound call, the call hangs up saying "not acceptable here", so it doesn't transcode. Any idea ? Thanks Franck

3 10

freeswitch.serial
by William Traenkle 21 Feb '10

21 Feb '10

A couple of quick questions: 1) what is the freeswitch.serial file under the &base_dir/conf directory? 2) can I change its location? Thanks, -Will

3 2

more than 1 profile for sofia/user ?
by Peter P GMX 21 Feb '10

21 Feb '10

Hello, in the standard setup - if a phone is registering to port 5060 - it is bound to the "internal" profile. And I can dial it via sofia/user/xxxx then. However due to NAT issues I would like to have to 2 seperate profiles for SIP phones. For example I have a "local" profile for all devices inside the LAN (e.g. Pattons und in future: local phones) and another "internal" profile which allows also external phones via external-xxx-ip. That way I would like to ensure that local phones have nothing to do with natted adresses and that external phones can register via external IPs. Question How do I manage that I can register a phone to the "local" profile and being able to dial that phone via sofia/user/xxxxx? Or do I think too complicated and there is simply nothing special to do? Best regards Peter

3 6

building for Lenny
by Brian May 21 Feb '10

21 Feb '10

Hello, What is the most recent instructions? According to <http://wiki.freeswitch.org/wiki/Installation_Guide>, I should install the freeswitch-sounds-music-8000 package, but no sounds packages are created in the build process. Thanks -- Brian May <brian(a)microcomaustralia.com.au>

6 10

LUA script providing dynamic directory information
by Maciej Bylica 20 Feb '10

20 Feb '10

Hello, I am trying to use mod_lua to provide dynamic directory information (binding in mod_lua.conf.xml) Here is my script. #!/usr/local/bin/lua -- load driver require "luasql.odbc" -- create environment object env = luasql.odbc(); -- connect to data source conn = env:connect("freeswitch","root"); -- reset our table if ( conn ~= nil ) then cur = conn:execute(string.format("SELECT email from VM where called_num='48112223344'")); if ( cur ~= nil ) then row = cur:fetch({}, "a"); if ( row ~= nil ) then freeswitch.consoleLog("info", " Email fetched from DB is = ".. row.email .."\n"); cur:close(); conn:close(); env:close(); mydialplan = [[ <?xml version="1.0" encoding="UTF-8" standalone="no"?> <document type="freeswitch/xml"> <section name="directory"> <domain name="10.10.10.1"> <user id="48112223344"> <params> <param name="vm-email-all-messages" value="true"/> <param name="vm-attach-file" value="true"/> <param name="vm-disk-quota" value="0"/> <param name="vm-email-all-messages" value="true"/> <param name="vm-mailto" value=".. row.email .."/> <param name="vm-keep-local-after-email" value="false"/> </params> </user> </domain> </section> </document> ]] XML_STRING = mydialplan end end end I've encountered a problem how to pass row.email gathered from DB directly to XML (vm-mailto). As you can see below configuration I have does not work properly. 2010-02-20 20:37:03.267071 [DEBUG] mod_voicemail.c:2358 Deliver VM to 48112223344(a)10.10.10.1 2010-02-20 20:37:03.276533 [INFO] switch_cpp.cpp:1129 Email fetched from DB is = hereis(a)MyEmaill.com 2010-02-20 20:37:03.435902 [DEBUG] switch_utils.c:631 Emailed file [/tmp/mail.1266694623f261] to [.. row.email ..] 2010-02-20 20:37:03.435902 [DEBUG] mod_voicemail.c:2526 Sending message to .. row.email .. I tried with: <param name="vm-mailto" value=.. row.email ../> <param name="vm-mailto" value="".. row.email ..""/> Both of them do not produce any "Sending message" output at all. Any thoughts? Thanks in advance. Maciej

2 2

codecs transcoding
by Madovsky 20 Feb '10

20 Feb '10

Hello, is it need proxy_media on true to transcode codecs ? Thanks Farnck

2 2