- FreeSWITCH-users - FreeSWITCH Mailing Lists

Skypiax- how to know which card to use?
by Doc 10 Mar '10

10 Mar '10

Hey guys, I am attempting to setup Skypiax and Freeswitch on Ubuntu Hardy. I've had a couple of previous problems which updating to SVN trunk release seemed to resolve, but I've got one lingering one to ask about. When a call comes in to my SkypeIn number (PSTN that rings my Skype), FS picks up and rings the desired extension. No problems there. What happens though is, the person that is on the extension in the office can hear the calling party just fine, but the calling party hears stuttered choppy sound. I've already tested my internet connection, and through QOS have assigned my test box 512K up and 512K down, so on one test call bandwidth should not be an issue. What do you think causes the stuttering on my audio for the calling party? Do you think it might be a codec? I have everything setup right now to use g711u. I'd like to use something smaller and higher quality, but I'm not sure what is a better option. I had made some phone calls as listed above and they tested out just fine, but in that same time frame I also recompiled Alsa drivers with the Skypiax dummy file, so do you think there might be something in that causing the stutter? Looking for some advice. Thanks, Doc

3 7

sofia_contact strange behavior
by RobertT 10 Mar '10

10 Mar '10

Hello everybody! I am experiencing problems with sofia_contact command. When I dial sofia_contact external/1000@<domain> in fs cli I see correct registration data, provided the user 1000 is registered. But in the same time when I call ${sofia_conatct(external/${dialed_ext}@$${domain})} from dialplan as an argument to deflect application I recieve error\user_not_registered. What the hell? Best regards, RobertT.

2 1

mod_managed - how listen for *999
by Chris 10 Mar '10

10 Mar '10

What i need to do is listen on a session before, during and after the session is bridged with another call. I know built into FS is the option to listen for *x where x is 0-9 but i really need more than one digit. I traced the method that listens for the single digit to the command switch_core_event_hook_add_send_dtmf(session, meta_on_dtmf); in switch_ivr_async.c mod_managed also has the following in the native class freeswitch. public static switch_status_t switch_core_event_hook_add_recv_dtmf(SWIGTYPE_p_switch_core_session session, SWIGTYPE_p_f_p_switch_core_session_p_q_const__switch_dtmf_t_enum_switch_dtmf_direction_t__switch_status_t recv_dtmf) The problem is i can't work out how to use it. I am fine the the first param for the session but have no idea what i need for the SWIGTYPE_p_f_p_switch_core_session_p_q_const__switch_dtmf_t_enum_switch_dtmf_direction_t__switch_status_t recv_dtmf param. if anyone can point me in the right direction or knows a better way i would be grateful. Chris

2 4

forwarding incoming call from gateway to local externsion
by srinivasula reddy 10 Mar '10

10 Mar '10

Hi Goodmorning. i have connected my freeswtich to cisco gateway, i have registerd a user(1099) in my freeswitch, and i have configured freeswitch any call from 1099 routing to cisco gateway, i need same way when call coming from gateway with 101010 i want to route or farward to 1099, what files need to configure any idea Regard srinvias

2 1

[ERR] switch_rtp.c:2196 Failed DTMF payload check.
by Dave Stevenson 10 Mar '10

10 Mar '10

Hi, can someone please advise what the above error message means ? "[ERR] switch_rtp.c:2196 Failed DTMF payload check." It appears in response to keypad events during voicemail retrieval, the prompts were actioned correctly, but I was wondering what the message actually means ? regards Dave

4 10

Bug in mod_commands.c with show calls command
by Wellie Chao 10 Mar '10

10 Mar '10

I am using the xml_rpc interface like so: http://192.168.1.1:8080/webapi/show?calls I get a response in a table, which is a little bit undesirable because I want to parse the result in a program and don't want to parse a bunch of HTML (just seems inelegant and wasteful), so I instead tried the following request: http://192.168.1.1:8080/txtapi/show?calls That works better, but then another wrinkle appears. Caller ID (and Callee ID) names sometimes have commas, which messes up the CSV. This appears to be a bug in mod_commands.c (or I suppose you could call it an artifact of somebody coding up something quickly and not worrying about the absolute correctness of something that is not critical to the core). There is also another bug with show calls via webapi in that the generated HTML has spurious <td> tags. I think the spurious <td> tag bug arises due to lines 3145-6 in mod/applications/mod_commands/mod_commands.c. Finally, another bug (or maybe just unimplemented feature) is that xmlapl isn't really different from webapi. These problems occur in the latest source tree (20100301). I am wondering if (a) one of the developers can fix these or (b) if I fix the bugs, how can I submit patches [and if I submit patches, will they be accepted into the main tree]? The fixes are pretty trivial and I'd be happy to code them up if somebody will tell me how I can submit the patches (haven't done it before).

5 7

Set/Export channel variable
by Ahmed Ajmal 10 Mar '10

10 Mar '10

Hi I am trying to set a channel variable on the bridge application using this: <action application="bridge" data="[gw=gateway1]sofia/gateway/gw/$number@$ipgw1 | [gw=gateway2]sofia/gateway/gw/$number@$ipgw2"/> The application runs fine, what I now need to do is set/export the 'gw' channel variable for CDR so that I know which gateway was dialed. I have tried using set and export application but that doesn't work. Please help. Thanks Ahmed

1 0

SUCCESS!!!
by Brian West 10 Mar '10

10 Mar '10

I have to say PYTHON SUCKS... ie Mailman is evil. /b

5 5

Incorrect nonce
by Jonas Gauffin 10 Mar '10

10 Mar '10

Hello, I got a problem with rejected calls due to 403 (happens sometimes). My sip provider found the problem, the nonce used by FS is sometimes incorrect (I got the trace from my sip provider). A sip trace can be found here: http://pastebin.freeswitch.org/12280 2010-03-02 08:42:15.247995 [NOTICE] switch_core_session.c:1696 Execute bridge([origination_caller_id_number=02366153XX]sofia/gateway/tele2/0707728XXX) EXECUTE sofia/external/061121487@212.151.144.8bridge([origination_caller_id_number=02366153XX]sofia/gateway/tele2/0707728XXX) 2010-03-02 08:42:15.247995 [NOTICE] switch_channel.c:642 New Channel sofia/external/0707728XXX [085c1d55-f66e-4da3-9b75-325ab3d14b4d] 2010-03-02 08:42:15.247995 [DEBUG] mod_sofia.c:3227 (sofia/external/0707728XXX) State Change CS_NEW -> CS_INIT 2010-03-02 08:42:15.247995 [DEBUG] switch_core_session.c:1012 Send signal sofia/external/0707728XXX [BREAK] 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:314 (sofia/external/0707728XXX) Running State Change CS_INIT 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:338 (sofia/external/0707728XXX) State INIT 2010-03-02 08:42:15.263619 [DEBUG] mod_sofia.c:83 sofia/external/0707728XXX SOFIA INIT 2010-03-02 08:42:15.263619 [DEBUG] mod_sofia.c:111 (sofia/external/0707728XXX) State Change CS_INIT -> CS_ROUTING 2010-03-02 08:42:15.263619 [DEBUG] switch_core_session.c:1012 Send signal sofia/external/0707728XXX [BREAK] 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:338 (sofia/external/0707728XXX) State INIT going to sleep 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:314 (sofia/external/0707728XXX) Running State Change CS_ROUTING 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:341 (sofia/external/0707728XXX) State ROUTING 2010-03-02 08:42:15.263619 [DEBUG] mod_sofia.c:132 sofia/external/0707728XXX SOFIA ROUTING 2010-03-02 08:42:15.263619 [DEBUG] switch_ivr_originate.c:66 (sofia/external/0707728XXX) State Change CS_ROUTING -> CS_CONSUME_MEDIA 2010-03-02 08:42:15.263619 [DEBUG] switch_core_session.c:1012 Send signal sofia/external/0707728XXX [BREAK] 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:341 (sofia/external/0707728XXX) State ROUTING going to sleep 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:314 (sofia/external/0707728XXX) Running State Change CS_CONSUME_MEDIA 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:360 (sofia/external/0707728XXX) State CONSUME_MEDIA 2010-03-02 08:42:15.263619 [DEBUG] switch_core_state_machine.c:360 (sofia/external/0707728XXX) State CONSUME_MEDIA going to sleep 2010-03-02 08:42:15.263619 [DEBUG] sofia.c:3992 Channel sofia/external/0707728XXX entering state [calling][0] 2010-03-02 08:42:15.263619 [DEBUG] sofia.c:3992 Channel sofia/external/0707728XXX entering state [calling][0] 2010-03-02 08:42:15.294868 [DEBUG] sofia.c:3992 Channel sofia/external/0707728XXX entering state [calling][100] 2010-03-02 08:42:15.294868 [DEBUG] sofia.c:3992 Channel sofia/external/0707728XXX entering state [calling][100] 2010-03-02 08:42:15.310492 [DEBUG] sofia.c:3992 Channel sofia/external/0707728XXX entering state [terminated][407] 2010-03-02 08:42:15.310492 [NOTICE] sofia.c:4634 Hangup sofia/external/0707728XXX [CS_CONSUME_MEDIA] [CALL_REJECTED] Regards, Jonas

5 12

auto attendant -> hunt group -> external number does not ring
by William Traenkle 10 Mar '10

10 Mar '10

FS Community, I created an extension 704 I created a hunt group 7004 that first rings 704 then rings my cell phone 16194548924. I created an auto attendant 5002 with an option of 704 that goes to hunt group 7004. 1) What does work: When I call the hunt group directly by dialing 7004 internally, the hunt group first rings 704 then rings my cell phone successfully. This is perfect. 2) What does not work: When I call the main auto attendant from either internally by dialing 5002 or externally by dialing my main number, and dial 704, my extension rings and after not answering my cell phone does not ring. What I am expecting in #2 is for my extension 704 to ring and if I do not pick up then my cell phone will ring just like it does in #1. My knowledge is limited in this area and if you could point me in the right direction, that would be great. I a have tried everything but with no luck. Thanks, -Will

2 2