- FreeSWITCH-users - FreeSWITCH Mailing Lists

[CRIT] switch_loadable_module.c:928 Error loading module ...
by mazilo 27 Mar '11

27 Mar '11

With FreeSWITCH Version 1.0.head (git-9795dd2 2011-03-26 11-07-34 -0500) and many versions before, I noticed (but forgot to report) the following error messages if I enable some of the modules, i.e. mod_erlang_event, mod_lcr, etc., even though I have successfully cross compiled the modules and installed. I don't know if this has anything to do with a cross compilation. 2011-03-26 14:32:36.251260 [CRIT] switch_loadable_module.c:928 Error Loading module /usr/lib/freeswitch/mod_erlang_event.so **Unknown error** 2011-03-26 14:32:43.288400 [CRIT] switch_loadable_module.c:928 Error Loading module /usr/lib/freeswitch/mod_lcr.so **Module load routine returned an error** I have both modules compiled and installed as seen below. The corrupted section header size trailing message returned by file utility is harmless, AFAICT. Otherwise, the /usr/bin/freeswitch and among other programs listed below, i.e. busybox and dropbear, won't even run. root@DockStar:/# ls -l /usr/lib/freeswitch/mod_erlang_event.so /usr/lib/freeswitch/mod_lcr.so -rwxr-xr-x 1 root root 58794 Mar 26 14:00 /usr/lib/freeswitch/mod_erlang_event.so -rwxr-xr-x 1 root root 39814 Mar 26 14:00 /usr/lib/freeswitch/mod_lcr.so root@DockStar:/# file /usr/lib/freeswitch/mod_erlang_event.so /usr/lib/freeswitch/mod_lcr.so /usr/lib/freeswitch/mod_sofia.so /bin/busybox /usr/sbin/dropbear /usr/bin/freeswitch /usr/lib/freeswitch/mod_erlang_event.so: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, corrupted section header size /usr/lib/freeswitch/mod_lcr.so: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, corrupted section header size /usr/lib/freeswitch/mod_sofia.so: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, corrupted section header size /bin/busybox: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), corrupted section header size /usr/sbin/dropbear: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), corrupted section header size /usr/bin/freeswitch: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), corrupted section header size root@DockStar:/# ----- FreeSWITCH hosted on a Seagate DockStar with OpenWRT. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/CRIT-switch-loadable-module-c… Sent from the freeswitch-users mailing list archive at Nabble.com.

2 3

Re: [Freeswitch-users] api conference dial
by Madovsky 27 Mar '11

27 Mar '11

If I understand the conference concept it means that the invited call is never really inside the conference loop ? because I can't see any events of the invite from ESL thanks ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 1:50 PM Subject: Re: api conference dial So after some invite tests I notced 6/8 seconds of audio delay between the invited call and conference. if the invited leg call himself the conference the latency is reasonable I heard in previous threads that there was maybe a latency problem if loopback is used in conference ? ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 1:07 PM Subject: Re: api conference dial sorry forget my request. I needed to set sip_to_uri variables to match my default dialplan correctly Thanks ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 12:26 PM Subject: api conference dial I try to do this conference testconf dial loopback/9999999999(a)domain.ltd 5555555555 freeSwitch to match default dialplan but the result is a loop. the log shows that the destination number is 9999999999(a)domain.ltd-b, why a "-b" is added ? must I change my default dialplan to match it ? Thanks

1 0

Phone opinions
by Joseph L. Casale 27 Mar '11

27 Mar '11

Hey guys, I need to grab a few phones to be used in a shop environment so spending a lot of money isn't desired as they will probably get wrecked soon. My only experience is with Aastra and Snom, the Aastra's I have are expensive and work well (at least sound quality is good), the Snom's not so. Given all the <$100.00 Grandstream's and Polycom's, anyone have an opinion on what works best w/ FS? None of our existing phones have configs handed out via tftp but its desired that these would so that replacement is easy. Thanks for any opinions... jlc

3 4

Re: [Freeswitch-users] api conference dial
by Madovsky 27 Mar '11

27 Mar '11

So after some invite tests I notced 6/8 seconds of audio delay between the invited call and conference. if the invited leg call himself the conference the latency is reasonable I heard in previous threads that there was maybe a latency problem if loopback is used in conference ? ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 1:07 PM Subject: Re: api conference dial sorry forget my request. I needed to set sip_to_uri variables to match my default dialplan correctly Thanks ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 12:26 PM Subject: api conference dial I try to do this conference testconf dial loopback/9999999999(a)domain.ltd 5555555555 freeSwitch to match default dialplan but the result is a loop. the log shows that the destination number is 9999999999(a)domain.ltd-b, why a "-b" is added ? must I change my default dialplan to match it ? Thanks

1 0

Re: [Freeswitch-users] api conference dial
by Madovsky 27 Mar '11

27 Mar '11

sorry forget my request. I needed to set sip_to_uri variables to match my default dialplan correctly Thanks ----- Original Message ----- From: Madovsky To: freeswitch-users(a)lists.freeswitch.org Sent: Sunday, March 27, 2011 12:26 PM Subject: api conference dial I try to do this conference testconf dial loopback/9999999999(a)domain.ltd 5555555555 freeSwitch to match default dialplan but the result is a loop. the log shows that the destination number is 9999999999(a)domain.ltd-b, why a "-b" is added ? must I change my default dialplan to match it ? Thanks

1 0

cleanup on hangup
by Ejay Greeves 27 Mar '11

27 Mar '11

Is it possible to hook onto events using esl in ruby. I am getting <defunct> ruby processes. I think this is happening because when a call is hung up it causes my script to terminate there and then and the ruby child processes are not being closed/cleaned up properly. While this does not stop new incoming calls because new fork process is spwaned I need a more gracefull handling when a call ends. I think I could do something if I can collect the hangup event. Is event hook/handler possible in esl?

1 0

api conference dial
by Madovsky 27 Mar '11

27 Mar '11

I try to do this conference testconf dial loopback/9999999999(a)domain.ltd 5555555555 freeSwitch to match default dialplan but the result is a loop. the log shows that the destination number is 9999999999(a)domain.ltd-b, why a "-b" is added ? must I change my default dialplan to match it ? Thanks

1 0

Re: [Freeswitch-users] sofia_reg_internal.db growbigger andbiggeralong with time
by fieldpeak 27 Mar '11

27 Mar '11

Hi Jonas, i also think so. can you please update was the bug fixed? 在 2011-3-25 下午5:14，"Jonas Gauffin" <jonas.gauffin(a)gmail.com>编写： might be the same bug as I reported here: http://jira.freeswitch.org/browse/FS-498 On Fri, Mar 25, 2011 at 8:13 AM, Charles <fieldpeak(a)gmail.com> wrote: > > no, this is not the c... _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

5 6

Mod_xml_cdr BLeg Account Code
by Robert Huddleston 27 Mar '11

27 Mar '11

Anyone have any suggestions on obtaining / setting the Account Code for BLeg for Mod_xml_cdr. I applied accountcode but that is only handling for ALeg. I also looked at effective_caller_id_number - but I need to dynamically (at time of bridging a-leg to b-leg) define the accountcode? Probably some custom coding I would assume to pull this off. Any thoughts. Thanks

4 3

bridge loop attribute
by Madovsky 27 Mar '11

27 Mar '11

is loop attribute be used (syntax?) in CLI dialstring ? thanks

2 1