- FreeSWITCH-users - FreeSWITCH Mailing Lists

uuid_hold is not send hold message
by 张明 04 Apr '11

04 Apr '11

freeswitch-users，您好！ uuid_hold command , freeswitch is not send HOLD message. who know it. 　　　　　　　　致礼！　　　　　　　　张明　　　　　　　　sc_zhangming(a)sina.com 　　　　　　　　　　2011-04-02

2 1

conf max-members is not enforced
by deniro 04 Apr '11

04 Apr '11

I've been experimenting this When phone callers *first* join to the conference "max-members" is not enforced (more members can join than max-members value) below is my piece of code. (it works when web audio callers first join to conference) analysed freeswitch logs but couldn't get much clue. any idea what might be causes for this behavior? $session->execute("conference","${PIN}@test_profile"); conference.conf.xml <profile name="test_profile"> <param name="max-members" value="2"/> <param name="max-members-sound" value="conference/conf-is-locked.wav"/> ........ ........ thx

2 1

How to set call max time
by ovvenkat 03 Apr '11

03 Apr '11

Hi to all, I dont know, how to set max time for a call. for example, call is landing from mobile to freeswitch. I need to disconnect the call after 500 seconds if still connnected. Which parameter I need to set to accomplish this situation . Thanks and Regards Venkat.

2 1

Re: [Freeswitch-users] turn off cdr
by Madovsky 03 Apr '11

03 Apr '11

sorry my bad it was old log thanks ----- Original Message ----- From: Madovsky To: Madovsky ; FreeSWITCH Users Help Sent: Sunday, April 03, 2011 1:16 PM Subject: Re: [Freeswitch-users] turn off cdr apparently all cdr modules are commented in the module.con.xml. but there's still log/cdr_csv and xml_cdr logs in logs folder... how to turn off ? ----- Original Message ----- From: Madovsky To: FreeSWITCH Users Help Sent: Sunday, April 03, 2011 12:13 PM Subject: Re: [Freeswitch-users] turn off cdr ok I wanted to be sure that turn off cdr was not a problem.for other modules (nibble bill for example) > Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) not so bad when you care of HD activity ;) ----- Original Message ----- From: Avi Marcus To: FreeSWITCH Users Help Sent: Sunday, April 03, 2011 6:02 AM Subject: Re: [Freeswitch-users] turn off cdr You can turn it off: http://wiki.freeswitch.org/wiki/Variable_process_cdr No side effect? Well, it won't affect the call flow (e.g. variables will still be set), but you won't get any CDRs saved.. It's all modular, so the mod_xml_cdr or mod_cdr_csv not saving the CDRs won't affect everything else.. (Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) -Avi On Sun, Apr 3, 2011 at 10:46 AM, Madovsky <infos(a)madovsky.org> wrote: is it possible to deactivate completly any cdr without any side effect ? Thanks _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

Re: [Freeswitch-users] turn off cdr
by Madovsky 03 Apr '11

03 Apr '11

apparently all cdr modules are commented in the module.con.xml. but there's still log/cdr_csv and xml_cdr logs in logs folder... how to turn off ? ----- Original Message ----- From: Madovsky To: FreeSWITCH Users Help Sent: Sunday, April 03, 2011 12:13 PM Subject: Re: [Freeswitch-users] turn off cdr ok I wanted to be sure that turn off cdr was not a problem.for other modules (nibble bill for example) > Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) not so bad when you care of HD activity ;) ----- Original Message ----- From: Avi Marcus To: FreeSWITCH Users Help Sent: Sunday, April 03, 2011 6:02 AM Subject: Re: [Freeswitch-users] turn off cdr You can turn it off: http://wiki.freeswitch.org/wiki/Variable_process_cdr No side effect? Well, it won't affect the call flow (e.g. variables will still be set), but you won't get any CDRs saved.. It's all modular, so the mod_xml_cdr or mod_cdr_csv not saving the CDRs won't affect everything else.. (Oddly, you could even bill via mod_nibblebill but not keep CDRs. Sounds like a bad idea though.) -Avi On Sun, Apr 3, 2011 at 10:46 AM, Madovsky <infos(a)madovsky.org> wrote: is it possible to deactivate completly any cdr without any side effect ? Thanks _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ---------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

FS and Skype conference
by Madovsky 03 Apr '11

03 Apr '11

I read on skype the article of conference call at https://support.skype.com/en/faq/FA2831/How-do-I-start-a-conference-call I'm curious to know with what technology they use to offer to hundred of thousands people confernce with 25 people without big latency CPU load and bandwidth problem.. any spy ?

2 1

freeswitch-users@lists.freeswitch.org
by Dave Bracken 03 Apr '11

03 Apr '11

freeswitch-users(a)lists.freeswitch.org I hated being broke all the time I had tried everything I cant believe how much this exceeded expectations http://j.mp/fEj6bH now im headed straight for the top im telling you this is the real deal

1 0

gateway port
by Ejay Greeves 03 Apr '11

03 Apr '11

I want to connect to a gateway which is configured on port 8081 What is the gateway param that sets the port on which to connect on the gateway

1 0

freeswitch-users@lists.freeswitch.org
by Dave Bracken 03 Apr '11

03 Apr '11

freeswitch-users(a)lists.freeswitch.org life has thrown plenty of obstacles my way people always look for an easy way out this turned my luck around http://j.mp/frSIba now I vacation four times a year youll get the hang of it

3 2

XML parser bug
by David Villasmil 03 Apr '11

03 Apr '11

Hello, I noticed the following: I have my sofia.conf.xml like this: <configuration name="sofia.conf" description="sofia Endpoint"> <global_settings> <param name="log-level" value="0"/>  <param name="debug-presence" value="0"/> </global_settings>  </configuration> when I start FS, latest GIT: freeswitch -version FreeSWITCH version: 1.0.head (git-7e52acf 2011-03-28 22-18-47 -0500) I get the following output: ./freeswitch -waste WARNING: Wasting up to 8 megs of memory per thread. 2011-03-30 14:02:23.200097 [INFO] switch_event.c:615 Activate Eventing Engine. 2011-03-30 14:02:23.211052 [DEBUG] switch_event.c:594 Create event dispatch thread 0 Cannot Initialize [[error near line 1521]: unclosed  <param name="debug-presence" value="0"/> </global_settings>  </configuration> Please note the absence of: <X-PRE-PROCESS cmd="include" data="../sip_profiles/*.xml" /> FS Starts normally! Is this the correct behaviour? Isn't comments supposed NOT to be read? Thanks all. David

5 7