- FreeSWITCH-users - FreeSWITCH Mailing Lists

Core Dump after compiling on Debian for Sparc
by A E [Gmail] 11 Apr '11

11 Apr '11

Hi Guys, So I finally got Freeswitch to compile on my Sparc machine running 64-bit debian. As was mentioned earlier, it was compiled with NO CXX flags or other options provided to the configure script. However, when I start freeswitch, it core dumps. All relevant information is available on: http://pastebin.freeswitch.org/16064 <http://pastebin.freeswitch.org/16064>Can someone please look at it and let me know if this is just me or this hints at a bug that no one else ran into. I'm running the latest from Git. Thanks so much

2 3

incoming calls from gateways without auth
by Boris Kovalenko 11 Apr '11

11 Apr '11

Hello! I have a profile where auth-calls param is true. Is there a way to have incoming calls from gateways without auth in this profile? Something like cidr="xxx" for directory entry? Or the only way is to write ACL with gateways' ips and use it with apply-inbound-acl? -- С уважением, Борис Коваленко ЗАО "Тагнет" (3435) 494991

1 0

Clarify about gateways please
by Boris Kovalenko 11 Apr '11

11 Apr '11

Hello! Reading documentation about gateways and misunderstanding. Please clarify: when there is inbound call from a gateway the destination_number is set to: ||   But in this case how may I know what destination_number gateway is calling? -- Regards, Boris

2 1

Mod_fifo outbound strategy enterprise
by Marc de Corny 11 Apr '11

11 Apr '11

Hi all, I am getting the hang of the fifo now and it is proving very stable which is what we all need. Got one question however regarding mod_fifo and the outbound strategies. >From looking at the outbput of the fifo list commands I can see that that parameter is always set to "ringall". which is fine, but I can also see many stats on that number of calls and the last call that the members have taken. Is there also a way of sending the calls to the longest idle or something of that nature? Is that done by setting the outbound_strategy to "enterprise" or is there another way to achieve that. Is there also a command to change that value without editing the XML as I am trying to make everything dynamic. any input is very much appreciated. thanks Marc

3 3

Optimal configuration for compiling on 64-bit platforms
by A E [Gmail] 11 Apr '11

11 Apr '11

Hello, I'm sure this has been talked about several times and searching through the email archives etc. I have seen 64-bit been mentioned many times, but never seen a targetted instructions as to what are the best/optimal parameters to give the configure script to compile on a 64-bit Linux platform. In the wiki, the following is given: CFLAGS=-m64 CXXFLAGS=-m64 LDFLAGS=-m64 ./configure --prefix=/opt/freeswitch --enable-core-odbc-support \ --enable-core-libedit-support --enable-64 --with-openssl=/usr/sfw But it's for compiling in Solaris. Do these flags/settings work on Linux? Can we just use '--enable-64' and that would take care of everything or do we need the extra CFLAGS, CXXFLAGS and LDFLAGS as well? I'm using Debian 64-bit Thanks AEG

4 13

Compiling mod_opal error
by FERNANDO VILLARROEL 11 Apr '11

11 Apr '11

Dear. I am trying of use mod_opal, i am use the the follow how to: http://wiki.freeswitch.org/wiki/FreeSwitch_H323 But when i try of install mod_opal i receive the follow error: cc:/usr/src/freeswitch.trunk# make mod_opal making all mod_opal Compiling /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp... Compiling /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp ... /usr/src/freeswitch.trunk/src/mod/endpoints/mod_opal/mod_opal.cpp:67: error: invalid conversion from âswitch_call_cause_t (*)(switch_core_session_t*, switch_event_t*, switch_caller_profile_t*, switch_core_session_t**, switch_memory_pool_t**, switch_originate_flag_t)â to âswitch_call_cause_t (*)(switch_core_session_t*, switch_event_t*, switch_caller_profile_t*, switch_core_session_t**, switch_memory_pool_t**, switch_originate_flag_t, switch_call_cause_t*)â make[4]: *** [mod_opal.lo] Error 1 make[3]: *** [all] Error 1 make[2]: *** [mod_opal-all] Error 1 make[1]: *** [mod_opal] Error 2 make: *** [mod_opal] Error 2 I am using FreesWITCH version: FreeSWITCH Version 1.0.trunk (16526) I need support H323 on my FS. Anyone could help me. Regards.

3 4

ESL with PHP not working
by Marc de Corny 10 Apr '11

10 Apr '11

Hi all got an issue with ESL I cannot figure out. I have installed enabled the event socket on the Freeswitch, and it works locally on the server via PHP I have a remote server were I compiled the ESL.so and did the php-install. It is a standard CentOS install with apache. when I type into the command line : php test.php ( the standard test script that is api status ) I get the correct result. when I execute the same script from the browser on the remote server I get an error on the getBody command. *Fatal error*: Call to a member function getBody() on a non-object in * /var/www/html/test.php* on line *9* the only think I can think of as it works from the command line as root but not as apache is rights or ownerships. but I have changed everything to apache without any luck. I'm thinking this must be a common issue. Anybody experienced this ? Thanks Marc

3 4

FreeSwitch SCXML
by jocke eriksson 10 Apr '11

10 Apr '11

Hello FreeSwitch user. I'm the owner of the freeswitch-scxml project, the project is housed at google-code address http://code.google.com/p/freeswitch-scxml/. My intention with this project is to make users able to write SCXML documents to handle there IVR. SCXML is small XML dialect that will manage your states and according to me it is well suited for IVR. The project is far from feature complete but pretty easy to extend. I will be adding more features so please feel free to drop in a feature request in the issue tracker. Regards Jocke Eriksson.

1 0

how to pass arbitrary headers from A leg to B leg when bridging
by Dave Horton 10 Apr '11

10 Apr '11

Is there a way to pass any desired SIP header that I receive on an A leg through to the B leg? I have looked at sofia_glue.c, and I see either special cases for certain headers being handled (e.g., Alert-Info), or support for only X- or P- custom headers. I have a specific need to pass the Proxy-Authorization header that I receive on an A leg and have that same header and value contained on the B leg INVITE I generate (I have authentication turned off for this configuration, because I don't want FS generating challenges, I just want it to pass through the relevant headers). Is this possible without hacking the code? Dave

1 0

problem setting request uri params when bridging a call
by Dave Horton 10 Apr '11

10 Apr '11

I'm relatively new to FS, so apologies if I'm missing something obvious.. I want to bridge an incoming call on the internal profile and have it go out to a configured gateway through the external profile, and I want any request-uri parameters that come in on the A leg to be also contained on the request-uri for the B leg. My first attempt at doing that was to create this dialplan in the public context: <extension name="epB" > <condition field="${sofia_profile_name}" expression="internal"> <action application="set" data="export_vars=sip_req_params"/> <action application="bridge" data="sofia/gateway/gwB/${destination_number}"/> </condition> </extension> This did not work -- the INVITE went out from the external sip profile without the parameters that came in on the received INVITE. The log messages did however indicate that the parameters were being exported: EXECUTE sofia/internal/5684935846(a)204.215.65.202 set(export_vars=sip_req_params) 2011-04-10 00:17:07.350172 [DEBUG] mod_dptools.c:1059 sofia/internal/5684935846(a)204.215.65.202 SET [export_vars]=[sip_req_params] EXECUTE sofia/internal/5684935846(a)204.215.65.202 bridge(sofia/gateway/gwB/15086160900) 2011-04-10 00:17:07.350172 [DEBUG] switch_channel.c:918 sofia/internal/5684935846(a)204.215.65.202 EXPORTING[export_vars] [sip_req_params]=[target=pcs_voip_originate] to event 2011-04-10 00:17:07.350172 [NOTICE] switch_channel.c:812 New Channel sofia/external/15086160900 [674ec775-befb-4b19-8e02-3b1f4159e1d6] However, if I put them in as dial string variables, it works: <extension name="epB" > <condition field="${sofia_profile_name}" expression="internal"> <action application="bridge" data="{sip_invite_params=${sip_req_params}}sofia/gateway/gwB/${destination_number}"/> </condition> </extension> Shouldn't I be able to use the 'set' application and 'export_vars' to get variables from the A leg to be passed to the B leg and to be incorporated appropriately into the B leg INVITE? (I am running a recent head build: FreeSWITCH-mod_sofia/1.0.head-git-244fd68 2011-03-21 14-27-57 -0400) Thanks in advance. Dave

1 0