- FreeSWITCH-users - FreeSWITCH Mailing Lists

non-blocking bridge in Lua
by Mi Ke 14 Jul '11

14 Jul '11

Hi all ! I want to make a Lua app which will start with Leg A, collect input, initiate outbound Leg B and when it answers, periodically play decreasing series of beeps to Leg A depending on how many minutes left to disconnect (remaining time queried via odbc). My initial idea was to issue a non-blocking bridge command after Leg B session originate returns ring-ready and then to do the rest in while loop, but the bridge called by api:executeString("bgapi bridge legB_session legA_session") just returns Job UUID without actually bridging sessions. A usual freeswitch.bridge call blocks further script execution until unbridged, disallowing me to check Leg B states when it's active. Is there any elegant way to acheive my goals using Lua/Dialplan apps ? To create an app starting with Leg A and constantly watching for Leg B existense/states, playing corresponding feedback messages to Leg A ? Thanks in advance for yours hints/responses Mike

2 1

please help!!! how to limit each FS registered user's active calls
by ran zhang 14 Jul '11

14 Jul '11

hi all: I'm trying to limit each registered user's active calls, so if that particular registered user pass the limit, FS stops sending any new incoming call to it and it can't make any new calls. I looked into 'limit' api, the counter increment everytime a call FS receives, regardless of which user it is for, and counter doesnt reset itself after the call is finished.

3 4

(no subject)
by Pablo Silva 14 Jul '11

14 Jul '11

unsub

2 1

mod_directory questions (prompt missing)
by Dave Horton 14 Jul '11

14 Jul '11

I'm trying to use mod_directory and after building and installing am having a couple of problems in my testing: First, it appears that there is a prompt missing: 2011-07-14 12:13:49.801293 [DEBUG] switch_ivr_play_say.c:244 Handle play-file:[directory/dir-press.wav] (en:en) 2011-07-14 12:13:49.801293 [ERR] mod_sndfile.c:194 Error Opening File [/usr/local/freeswitch/sounds/en/us/callie/directory/dir-press.wav] [System error : No such file or directory.] All of the other prompts appear to be there (under /sounds/en/us/callie/directory/) but this one is missing for some reason. I did a standard build from latest git as of a few weeks ago. Is this a known issue, and is there somewhere I could get this prompt? Secondly, right after I enter the DTMF digits for someone's last name it it reports that there is 1 match and spells out the name, etc, (and encounters the missing prompt) it then immediately tries to to a transfer to the extension that is currently active (which I named 'company_directory') rather than waiting for my DTMF input confirming that I want to be connected to the matching extension for the name I entered. See log snippet below. The way I have set this up for testing is that I added an option to the main ivr that does a menu-exec-app and transfers to the company_directory extension, which then executes the 'directory' app. I'm not sure why the directory app finished running before collecting my response (as to whether I wanted to search again or connect to the matching extension) nor why it then tried to do a transfer (again) to 'company_directory' and then hung up. 2011-07-14 12:13:48.513298 [DEBUG] switch_ivr_play_say.c:244 Handle play-file:[directory/dir-to_select_entry.wav] (en:en) 2011-07-14 12:13:48.533305 [DEBUG] switch_ivr_play_say.c:1279 Codec Activated L16@8000hz 1 channels 20ms 2011-07-14 12:13:49.681295 [DEBUG] switch_ivr_play_say.c:1649 done playing file 2011-07-14 12:13:49.921288 [DEBUG] switch_ivr_play_say.c:67 No language specified - Using [en] 2011-07-14 12:13:49.921288 [DEBUG] switch_ivr_play_say.c:244 Handle play-file:[directory/dir-no_more_results.wav] (en:en) 2011-07-14 12:13:49.941293 [DEBUG] switch_ivr_play_say.c:1279 Codec Activated L16@8000hz 1 channels 20ms 2011-07-14 12:13:50.989241 [DEBUG] switch_ivr_play_say.c:1649 done playing file EXECUTE sofia/external/+15083084809(a)65.162.239.203 transfer(company_directory enum) 2011-07-14 12:13:51.109194 [DEBUG] switch_ivr.c:1622 (sofia/external/+15083084809(a)65.162.239.203) State Change CS_EXECUTE -> CS_ROUTING 2011-07-14 12:13:51.109194 [DEBUG] switch_core_session.c:1118 Send signal sofia/external/+15083084809(a)65.162.239.203 [BREAK] 2011-07-14 12:13:51.109194 [DEBUG] switch_core_session.c:711 Send signal sofia/external/+15083084809(a)65.162.239.203 [BREAK] 2011-07-14 12:13:51.109194 [NOTICE] switch_ivr.c:1628 Transfer sofia/external/+15083084809(a)65.162.239.203 to enum[company_directory@default]

2 1

Problem with pause
by Fabio Bigliardi 14 Jul '11

14 Jul '11

Hi all, I'm trying to have an audio stream played back on a channel and to pause/resume it through API commands on event socket. Below you can find the sequence of commands and outputs: $ telnet 127.0.0.1 8021 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. Content-Type: auth/request auth ClueCon Content-Type: command/reply Reply-Text: +OK accepte api originate user/1003 &playback(${sounds_dir}/jazz.wav) Content-Type: api/response Content-Length: 41 +OK 8fcdb494-82a4-42c4-b011-ecca1da0ade2 api pause 8fcdb494-82a4-42c4-b011-ecca1da0ade2 on Content-Type: api/response Content-Length: 14 *-ERR no reply* ** * * The "pause" command is successful (the stream is really paused) but the api response indicates an error. Same output with the CLI. Is it correct? Thank you very much. Fabio Bigliardi

2 1

Cisco 7960 registration issue using mod_skinny
by Manjiri Deshpande 14 Jul '11

14 Jul '11

Hi, From last week I was trying to register Cisco phone with FreeSwitch using mod_skinny.I am using solarwinds as TFTP server . But registration is not successful. Phone cycles through the process of TFTP download and sending register message along with some more SKINNY messages to FreeSwitch. Also on FreeSwitch Console I get message as "UCM-Closed-TCP" Attached are the wireshark capture for phone and FreeSwitch.log file From wireshark capture we can clearly see that phone sends "RegisterMessage" SKINNY message in a cycle. This is the consistent flow. Also attaching SEP[MAC].cnf.xml file which I am using. Ph IP Addr : 192.1681.1.205 FreeSwitchIP Addr : 192.168.1.116 Please have a look at this issue and let me know if I am missing anything here Thanks, Manjiri

2 1

session.recordFile create empy wav in while loop
by Daniel Knoll 14 Jul '11

14 Jul '11

Hey Guys, i have a strange Problem with session.recordFile in a while loop and i don't know how to solve it. The first run in the loop is absolutly ok, session.recordFile is creating a good clean wavefile. but in the second, third .. run, every wav file has a size of 47724 byte and no audio content. Please help me, because it is an urgent case. Thankx for getting help. Daniel

4 10

FreeTDM - Sangoma B700 - ISDN connection questions - UK
by John 14 Jul '11

14 Jul '11

Hello, I have just set up a FreeSWITCH box with a Sangoma B700 connected to 2 x ISDN2e lines (each 2B+D, so 4 voice channels) in UK, so supplied by BT Openreach. There are a number of anomalies that I am trying to solve. [One of these is that 1 line is dead, but that is for BT Openreach to resolve rather than anyone on this list.] I have a few questions, but as they are all related, I hope you don't mind them in one post. Some basics first. The box is an Atom dual-core with 2GB of memory and a Sangoma B700 card. It's built with Ubuntu 10.04.2 LTS server 64-bit, patched and up to date, and also runs dhcpd, lighttpd and sshd. I built the Sangoma ISDN libraries and FreeSWITCH using the latest git versions I could ('make current' about 2 weeks ago). We have incoming and outgoing calls working, but some incoming calls ring in the caller's ear, but nothing appears on the FreeSWITCH console, and others fail. Rebooting the server cures this. We have had problems with lines being disconnected and then reconnected, and it seems that FreeTDM/wanrouter/whatever doesn't recognise previously disconnected lines coming back into use, because a reboot finds lines that were previously reported disconnected ('wanrouter status' or 'ftdm list'). We have ongoing problems with one line that is 'disconnected' (wanpipe2/wp2) but the queries I am describing below apply equally when both lines are connected and working. 1. There seems to be a lot of ISDN 'chatter' with channels going up and down all the time even when the switch is completely idle. Is this normal? Here is my /log 7 showing two of the cycles (which appear to be about 50s apart): 2011-06-06 22:01:54.992467 [DEBUG] ftmod_sangoma_isdn_stack_rcv.c:681 [SNGISDN Q921] wp1: Protocol: Data Link connection DN(4): Disconnect initiated(263) 2011-06-06 22:02:29.952464 [WARNING] ftmod_sangoma_isdn_stack_rcv.c:748 [SNGISDN Q931] s1: Interface: Down(261): Dchan(285) 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c1][1:1] Signalling link status changed to DOWN 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c2][1:2] Signalling link status changed to DOWN 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c3][1:3] Signalling link status changed to DOWN 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c1][1:1] Setting availability rate to:5 2011-06-06 22:02:29.952464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c1][1:1] Setting availability rate to:5 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c2][1:2] Setting availability rate to:5 2011-06-06 22:02:29.952464 [INFO] mod_freetdm.c:2345 1:1 signalling changed to :DOWN 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c2][1:2] Setting availability rate to:5 2011-06-06 22:02:29.952464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c3][1:3] Setting availability rate to:5 2011-06-06 22:02:29.952464 [INFO] mod_freetdm.c:2345 1:2 signalling changed to :DOWN 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c3][1:3] Setting availability rate to:5 2011-06-06 22:02:29.952464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.952464 [INFO] mod_freetdm.c:2345 1:3 signalling changed to :DOWN 2011-06-06 22:02:29.952464 [INFO] ftmod_sangoma_isdn_stack_rcv.c:631 Received RESTART CFM (dChan:1 ces:0 type:1) 2011-06-06 22:02:29.952464 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:1179 Receved RESTART, but Restart Indicator IE not present 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_stack_rcv.c:681 [SNGISDN Q921] wp1: Protocol: Data Link connection UP(3): UA frame with F-bit = 1(258) 2011-06-06 22:02:29.972464 [INFO] ftmod_sangoma_isdn_stack_rcv.c:631 Received RESTART CFM (dChan:1 ces:0 type:0) 2011-06-06 22:02:29.972464 [INFO] ftmod_sangoma_isdn_stack_rcv.c:729 [SNGISDN Q931] s1: Interface: UP(260): Dchan(285) 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c1][1:1] Signalling link status changed to UP 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c2][1:2] Signalling link status changed to UP 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c3][1:3] Signalling link status changed to UP 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c1][1:1] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c1][1:1] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c2][1:2] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c2][1:2] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c3][1:3] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c3][1:3] Setting availability rate to:10 2011-06-06 22:02:29.972464 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:1179 Receved RESTART, but Restart Indicator IE not present 2011-06-06 22:02:29.972464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.972464 [INFO] mod_freetdm.c:2345 1:1 signalling changed to :UP 2011-06-06 22:02:29.972464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.972464 [INFO] mod_freetdm.c:2345 1:2 signalling changed to :UP 2011-06-06 22:02:29.972464 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:02:29.972464 [INFO] mod_freetdm.c:2345 1:3 signalling changed to :UP 2011-06-06 22:03:19.912462 [DEBUG] ftmod_sangoma_isdn_stack_rcv.c:681 [SNGISDN Q921] wp1: Protocol: Data Link connection DN(4): Disconnect initiated(263) 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_stack_rcv.c:681 [SNGISDN Q921] wp1: Protocol: Data Link connection UP(3): UA frame with F-bit = 1(258) 2011-06-06 22:03:19.932483 [INFO] ftmod_sangoma_isdn_stack_rcv.c:631 Received RESTART CFM (dChan:1 ces:0 type:0) 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_stack_hndl.c:1179 Receved RESTART, but Restart Indicator IE not present 2011-06-06 22:03:19.932483 [INFO] ftmod_sangoma_isdn_stack_rcv.c:729 [SNGISDN Q931] s1: Interface: UP(260): Dchan(285) 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c1][1:1] Signalling link status changed to UP 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c2][1:2] Signalling link status changed to UP 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_cntrl.c:43 [s1c3][1:3] Signalling link status changed to UP 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c1][1:1] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c1][1:1] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c2][1:2] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c2][1:2] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:200 [s1c3][1:3] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] ftmod_sangoma_isdn_support.c:186 [s1c3][1:3] Setting availability rate to:10 2011-06-06 22:03:19.932483 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:03:19.932483 [INFO] mod_freetdm.c:2345 1:1 signalling changed to :UP 2011-06-06 22:03:19.932483 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:03:19.932483 [INFO] mod_freetdm.c:2345 1:2 signalling changed to :UP 2011-06-06 22:03:19.932483 [DEBUG] mod_freetdm.c:2268 got clear channel sig [SIGSTATUS_CHANGED] 2011-06-06 22:03:19.932483 [INFO] mod_freetdm.c:2345 1:3 signalling changed to :UP freeswitch@internal> ftdm list +OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: ok signaling_status: UP chan_count: 3 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none +OK span: 2 (wp2) type: Sangoma (ISDN) physical_status: alarmed signaling_status: DOWN chan_count: 3 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none +OK span: 3 (FXS) type: analog physical_status: ok signaling_status: UP chan_count: 2 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options: none # wanrouter status Devices currently active: wanpipe1 wanpipe2 wanpipe3 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A500/B700| 20 | 0 | 1 | N/A | 0 | wanpipe2 | N/A | A500/B700| 20 | 0 | 1 | N/A | 0 | wanpipe3 | N/A | A200/A400/B600/B700/B800| 20 | 0 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT ISDN | N/A | Connected | wanpipe2 | AFT ISDN | N/A | Disconnected | wanpipe3 | A-ANALOG | N/A | Connected | # cat /etc/wanpipe/wanrouter.rc #!/bin/sh # .. comments snipped ... ROUTER_BOOT=YES WAN_CONF_DIR=/etc/wanpipe WAN_INTR_DIR=/etc/wanpipe/interfaces WAN_BIN_DIR=/usr/sbin WAN_LOG=/var/log/wanrouter WAN_LOCK=/var/lock/wanrouter WAN_LOCK_DIR=/var/lock WAN_IP_FORWARD=NO NEW_IF_TYPE=NO WAN_LIB_DIR=/etc/wanpipe/lib WAN_ADSL_LIST=/etc/wanpipe/wan_adsl.list WAN_ANNEXG_LOAD=NO WAN_SCTP_LOAD=NO WAN_LIP_LOAD=NO WAN_DYN_WANCONFIG=NO WAN_SCRIPTS_DIR=/etc/wanpipe/scripts WAN_FIRMWARE_DIR=/etc/wanpipe/firmware WAN_DEVICES_REV_STOP_ORDER=YES WAN_DEVICES="wanpipe1 wanpipe2 wanpipe3 " # cat /etc/wanpipe/wanpipe1.conf #================================================ # WANPIPE1 Configuration File #================================================ # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_ISDN_BRI, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE_API, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 0 PCIBUS = 5 FE_MEDIA = BRI FE_LINE = 1 TDMV_LAW = ALAW RM_BRI_CLOCK_MASTER = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance mode #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode TDMV_HW_DTMF = YES # YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = YES # YES: receive fax 1100hz events from hardware HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default) # OCT_SPEECH: improves software tone detection by disabling NLP (echo possible) # OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions. HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled) HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo) HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default) HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default) HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 80 ... and wanpipe2 was also automatically generated so just has '2' for FE_LINE and TDMV_SPAN instead of '1'. # cat /usr/local/freeswitch/conf/freetdm.conf [span wanpipe wp1] trunk_type => bri group=1 b-channel => 1:1-2 d-channel => 1:3 [span wanpipe wp2] trunk_type => bri group=1 b-channel => 2:1-2 d-channel => 2:3 [span wanpipe FXS] name => freetdm trunk_type => fxs group => grp2 fxs-channel => 3:1 trunk_type => fxs group => grp2 fxs-channel => 3:2 # cat /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="Freetdm Configuration"> <settings> <param name="debug" value="0"/>    </settings> <config_profiles> <profile name="my_bri_te_1"> <param name="switchtype" value="euroisdn" /> <param name="interface" value="cpe"/> <param name="facility" value="no" /> </profile> </config_profiles> <sangoma_bri_spans> <param name="dialplan" value="XML"/> <param name="context" value="public"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </sangoma_bri_spans> <analog_spans>  <param name="dialplan" value="XML"/> <param name="context" value="default"/>     </analog_spans> </configuration> What other config files do I need to supply? I don't want to deluge the list any more in my first post! 2. We have 2 Single Number DDI numbers configured over the 4 channels. I want to set up outgoing calls so that they can appear to come from either of the two numbers, but at present the outgoing CLI appears to be overridden by the telco (BT) to only use one of the numbers. Has anyone got this working in UK, and what is the format for the outbound_caller_id_number: last 6 digits or full 11 digits? I note that the inbound called number is only the last 6 digits. 3. I have built FreeSWITCH from git and installed at /usr/local/... and then followed the steps on the Ubuntu page in the Wiki to set up the run control scripts, etc, and run FS non-root as freeswitch:daemon. With FreeTDM, I have discovered that the /dev/wan* devices are owned by root:root, and so are inaccessible to FS running as non-root. So for now I have added a line in /etc/init.d/freeswitch to 'chgrp freeswitch /dev/wan*'. This is not the most elegant solution, because 'wanrouter restart' (which seems to be my best friend at the moment) resets the ownership to root:root. I have tried grepping to see where the mknods are for these devices, but have been unsuccessful. Is there a better place to 'permanently' change the device ownership? Thanks for all the great support I have already got just from editing my Wiki User page; this is a friendly group! John

13 31

Javascript from javascript == session freeze
by Boris Kovalenko 14 Jul '11

14 Jul '11

Hello! I modified my DISA javascript to use 'originate' back to my FS with collected number. The context where the call is placed calls another simple javascript application. And when application is called my session freezes. If I remove call to javascript application all is ok. So am I missed something in docs and I can not call this way or should I open JIRA? -- Regards, Boris

1 0

How to run flex client correctly?
by Dmitry Kravchenko 14 Jul '11

14 Jul '11

Hi! How to run flex client correctly? If I just put a repository files from here http://fisheye.freeswitch.org/browse/freeswitch.git/clients/flex into webserver root, and open freeswitch.html, I get damaged web page with apparently no design. Looks like stylesheets not work. No question about allowing microphone appears. If I open swf file in flashplayer, it is just blank. Changing flashvars to correct freeswitch installation URL does not help. Running mxmlc does not help (although it runs without errors). How correctly working client should look like? Where to put freeswitch credentials? Thanks.

1 0