- FreeSWITCH-users - FreeSWITCH Mailing Lists

Using different contexts in gateways than the profile context
by Gustavo Mársico 22 Oct '11

22 Oct '11

Hi all I'm trying to build a useful way to handle the remote gateways in wholesale scenarios. I'm checking the xml_curl due the very complex (and dynamic) rules of wholesale. As far as I see, besides the IP address of the remote gw, the context could be a good differentiator of different remote entities. I tried to change the Context of the gateways in the external profile (conf/sip_profiles/external/ws31.xml) to something like: <include> <gateway name="10.8.0.10"> <param name="register" value="false"/> <param name="ping" value="25"/> <param name="context" value="tgrp31"/> </gateway> </include> But for some reason Caller-Context and Hunt-Context are shown as 'public' context, which is the context configured in the external profile (conf/sip_profiles/external.xml). Also, I tried to remove the context on the external.xml and keep the context in the external/ws31.xml file, to know if profile context configuration has precedence over the gateway context configuration. But this time, Caller-Context and Hunt-Context show 'default' as context (seems like mod_sofia is not using the context defined in the gateway). Looking the src: In the file src/endpoints/mod_sofia/sofia.c (parse_gateways function) if (!context) { context = "default"; } Which is perfectly fine and it's according to the behavior I've seen. Below that, I found where the context is loaded: } else if (!strcmp(var, "context")) { context = val; A few lines after that: gateway->register_context = switch_core_strdup(gateway->pool, context); I did some debugs in that function and the context is well recorded. In the sofia_handle_sip_i_invite function the register_context variable is used again: if (gateway) { context = switch_core_session_strdup(session, gateway->register_context); But the following comparison: if (gw_name || gw_param_name) { always return false, because a "gw+" is expected as part of the destination number. if (strstr(destination_number, "gw+")) { Just asking, shouldn't be a gateway treated as a gateway no matter if the destination contains certain characters or not? I'm using FreeSWITCH Version 1.0.head (git-918d97b 2011-10-13 10-51-34 -0500) Is this the expected behavior, am I looking this in the wrong way or am I missing something? Best regards Gustavo

1 0

Reloading sofia+distributor
by David Villasmil 22 Oct '11

22 Oct '11

Hello, I understand that if I make a change in a gateway, like IP address I need to first kill the gw because fs doesn't updated the config until all sessions are finished. If the gateway has no traffic, that's fine. But the idea would be for the change to take effect starting with the new incoming calls and allow the old ones to end normally. Also, when you kill a gw and then reload it, and incoming call between the kill and the reload will NOT be handled... this is just not right for a production environment.. Is there any other way of doing this WITHOUT actually: - not handling new incoming calls? - having to kill the gw? Thanks! David

4 10

Problem sending E-mail in Freeswitch on windows
by ayobami 22 Oct '11

22 Oct '11

Please people help me out, I want to send email in a lua script of mine in freeswitch the code is below freeswitch.email("ayobami(a)programmer.net", "ayobami.adewole(a)gmail.com", "subject: testing fs mail function", "checking to see if this guy works") and I have downloaded the msmtp.exe and placed in c:\windows\system32 folder as directed i have equally changed the configuration in switch.conf.xml but each time i keep running the script, I keep getting the same error message, which is sendmail is not recognised as an internal or external command -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Problem-sending-E-mail-in-Fre… Sent from the freeswitch-users mailing list archive at Nabble.com.

3 2

bind_digits_action and conference
by Madovsky 22 Oct '11

22 Oct '11

Hi all, when bind_digit_action dtmf keys are fired I noticed that the whole conference audio is muted. is there any option to the audio of conference while bind_digits_action is fired ? Thanks Franck

1 1

cdr reconciliation
by Cesar Bermudez 21 Oct '11

21 Oct '11

Hi guys, what you do whan have a cdr dispute? what mechanic do, how you compare what tools use? Best regards.

3 3

Make freeswitch use spanish sounds...
by Francisco Javier Cintrón Olguín 21 Oct '11

21 Oct '11

I downloaded this file which is a set of spanish sounds for freeswitch: http://files.freeswitch.org/freeswitch-sounds-es-mx-maria-44100.tar.gz As you see It only has sounds for the 44100 frecuency. To generate files for the 8000, 16000 and 32000 frecuencies, I untarred the file inside freeswitch/sounds directory. After I untarred the file, there was a directory called es/mx/maria which has all this subdirectories: ascii currency ivr phonetic-ascii voicemail conference digits misc time zrtp For each of these subdirectories I made this: cd "one of the directories inside sounds/es/mx/maria " mkdir 8000 mkdir 16000 mkdir 16000 cd 44100 for a in *.wav; do /usr/bin/ffmpeg -i "$a" -ar 8000 -ac 1 -ab 128 "../8000/"$a; /usr/bin/ffmpeg -i "$a" -ar 16000 "../16000/"$a; /usr/bin/ffmpeg -i "$a" -ar 32000 "../32000/"$a; done Now I have a complete set of spanish sounds for the 8000, 16000, 32000 y 44100 frecuencies ¿What would I need to configure in freeswitch to use these spanish sounds instead of the english ones? Thanks in advance for your kind help.

3 5

Bridge problem - (randomly) leg A looses events and communication with leg B
by Mateusz Bartczak 21 Oct '11

21 Oct '11

Hi All, My scenario: number dialed by user test_user dial plan configured to send outbound call to event socket listening on 127.0.0.1:11111 outbound call is intercepted, bridge application is executed to connect leg A (test_user) with dialed number via my SIP provider (leg B) The problem is, that (completely randomly - sometimes it's OK, sometimes not) user's session is desynchronized with events from leg B. Leg B dials number and connects via SIP provider to the destination number (that's always OK) But (randomly) leg A doesn't get ring back, no connect event, still in "calling" state until 30 second timeout (in the same time leg B is connected OK) but there is some problem with passing events from leg B to leg A Bridge params: {ignore_early_media=true,bypass_media=false,origination_caller_id_name=004822333222111,origination_caller_id_number=004822333222111,effective_caller_id_number=004822333222111,effective_caller_id_name=004822333222111,execute_on_answer=sched_hangup +5700 alloted_timeout}sofia/gateway/supergateway/0000048222019475 I've tried to change socket mode to sync but with no success I use following Java code to execute bridge application: SendMsg msg = new SendMsg(); msg.addCallCommand("execute"); msg.addExecuteAppName("bridge"); msg.addExecuteAppArg(dialstring); msg.addEventLock(); Full freeswitch console log link: http://pastebin.com/eLCmMXRB I will greatly appreciate your help solving this problem

2 1

Transparent external call
by Hynek Cihlar 21 Oct '11

21 Oct '11

<context name="default"> <extension name="ext"> <condition field="destination_number" expression="^(\d+)$"> <action application="bridge" data="sofia/internal/$1%${domain_name}"/> *HOW TO RUN THIS ACTION, ONLY IF THE ABOVE BRIDGE FAILS (THE DST NUMBER IS NOT AN EXTENSION OF A REGED USER)?* <action application="bridge" data="sofia/external/$1@${host}"/> </condition> </extension> Hynek

2 6

Sip register with contact reg-id and +sip.instance
by Grillo Giuseppe 21 Oct '11

21 Oct '11

Hi all, I have the need that the "Contact" in SIP register is formatted as follows including reg-id and +sip.instance. How do I configure freeswitch to send the "Contact" so ? REGISTER sips:10.10.2.110 SIP/2.0 From: sips:1000@10.10.2.110;tag=-5159386d4396-8_F192.168.178.29 To: sips:1000@10.10.2.110 Call-ID: 1_909-5f0974b1386d4ca0_R(a)192.168.178.29 CSeq: 1 REGISTER Via: SIP/2.0/TLS 192.168.178.29:5061;branch=z9hG4bK1_90a4615b657386d4ca8_R Content-Length: 0 Max-Forwards: 70 Contact: <sips:1000@192.168.178.29:5061;avaya-sc-enabled;transport=tls>;q=1;expir es=900;reg-id=1;+sip.instance="<urn:uuid:00000000-0000-1000-8000-00040de c6f47>" Allow: INVITE,CANCEL,BYE,ACK,SUBSCRIBE,NOTIFY,INFO,REFER,UPDATE User-Agent: Avaya one-X Deskphone Supported: replaces Thanks for your help! Kind regards Giuseppe Internet Email Confidentiality Footer ----------------------------------------------------------------------------------------------------- La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto. This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. -----------------------------------------------------------------------------------------------------

2 3

Re: [Freeswitch-users] Running FreeSwitch as Windows Service
by Peter Olsson 21 Oct '11

21 Oct '11

Remove the service again, and the execute FreeSwitchConsole.exe -install. And try again /Peter ----- Reply message ----- Från: "Adelia C." <hexade(a)hotmail.com> Datum: ons, okt 19, 2011 18:49 Rubrik: [Freeswitch-users] Running FreeSwitch as Windows Service Till: "freeswitch-users(a)lists.freeswitch.org" <freeswitch-users(a)lists.freeswitch.org> Hello, I am building FreeSwitch through VS 2010 (not VC++ Express) and I generate FreeSwitchConsole.exe as a console application. No FreeSwitch.exe is generated. FreeSwitchConsole runs fine as an application but I need to run the SW as a service. I installed Freeswitch as a local service that calls FreeSwitchConsole.exe, and this is the output of "sc qc FreeSWITCH": C:\FreeSWITCH>sc qc FreeSWITCH [SC] QueryServiceConfig SUCCESS SERVICE_NAME: FreeSWITCH TYPE : 10 WIN32_OWN_PROCESS START_TYPE : 2 AUTO_START ERROR_CONTROL : 1 NORMAL BINARY_PATH_NAME : C:\FreeSWITCH\FreeSwitchConsole.exe LOAD_ORDER_GROUP : TAG : 0 DISPLAY_NAME : FreeSWITCH DEPENDENCIES : SERVICE_START_NAME : LocalSystem Trying to start FreeSwitch as a service results in Error 1053 Timeout - Event Viewer is : Timeout (30000 milliseconds) waiting for the FreeSWITCH service to connect. Or: C:\FreeSWITCH>net start freeswitch The service is not responding to the control function. Is it because I am trying to start a console application as a service? Do I need to have a FreeSwitch.exe and if so, how do I build it? Do I need to create a Windows Service wrapper project? I tried using winserv (supposed to start console apps as service), with same result: C:\FreeSWITCH>..\tools\winserv\winserv start FreeSwitch ERROR 1053: The service did not respond to the start or control request in a timely fashion. What am I missing? Thank you. A.C. !DSPAM:4e9efdb732761275568181!

3 4