- FreeSWITCH-users - FreeSWITCH Mailing Lists

voice bulletin board system
by Rodney 15 Nov '11

15 Nov '11

system= windows server 2008 32bit I would like a method for a voice bulletin board system. This would allow my callers to system the ability to post a message of a stated length to a public "bulletin board" scenario caller dials ivr option for voice bbs . options are 1 to play the last message recorded through the first recorded, option 2 next message, and 3 to record so lifo? i would need to set a maximum of say "20" messages" so it deletes the oldest . i would also want to limit it to 3 or 5 posts per call from 1 individual. also would like a spam option for auto delete. 1. method to record 2. method to review that recording and give options 2 to repeat or 3 to save and 0 to cancel and go back to ivr asking if they want to record or play 3. method to play LIFO messages up to 20, with auto delete 4. method for callers to hit dtmf option 9 to mark as spam. if 2 or 3 unique callers mark as spam then message gets auto deleted. demo of what i need programmed is 218-895-2080 this system is propitiatory and i am trying to duplicate using freeswitch. any help would be appreciated.

2 1

list of conference rooms . "next room command"
by Rodney 15 Nov '11

15 Nov '11

scenario i have a conference / voice personals dating line that has a list of conferences . in this case they are labeled conference room 1 conference room 2 conference room 3 etc users select dtmf 1-19 from a conference menu and get put into the conference room. i want to setup options for them to move forward and backward through this list but since the conf module profile binds digits to every conference i currently would have to setup up a separate profile for each conference room in order for me to make bind digit 7 move forward in the list to the "next room" or 6 to go to "previous" room number . ie. is there a variable that would take the room im in say and make dtmf 6 mean transfer me to room 1 backwards 1 getting me to room 19 without going back to conference menu and pressing 7 moves me forward in the list numerically without having to go back to conference menu and choosing a new dtmf press 7 from room 1, you go to room 2 press 7 from room 2, you go to room 3, etc press 6 from room 1 , you go to 19 press 6 from room 9 , you go to 8 but if i only have 1 profile "default" i can only use that bind digit to move to a static conference in the ivr. please tell me that i am missing the understanding and there is an easy way to do this with one conference profile. thank you

2 1

block unknown callers
by Rodney 15 Nov '11

15 Nov '11

I am using ipkall for one of my gateways and it does not pass flex ani. so they are allowed to block themselves . what can i add before or after the answer condition so it transfers the call to a toll free trap that forwards unblocked ball back to the dialplan or either transfers them to a local message that tells them to call back unblocked then hangs up.

2 1

Not seeing sip_call_id in b-leg XML CDR for cancelled calls
by Blake Sevier 15 Nov '11

15 Nov '11

Hi all, Quick question - For my bridged calls, if my b-leg call is cancelled during call setup (ex. hangup_cause=ORIGINATOR_CANCEL), I’m not seeing a ‘sip_call_id’ for the b-leg of the call within the XML CDRs. I probably have something setup incorrectly, but does anyone else see this behavior? Thanks, Blake

3 3

Howto set only one console debug level messages in fs_cli
by Vidan 15 Nov '11

15 Nov '11

Hi, I am newbie on FreeSwitch, I would like show only the INFO(6) messages in fs_cli console, not any others (err, warning etc.). I am tried to modify switch.conf.xml, var.xml and console.conf.xml and switch.conf.xml. I see alway all type of messages until defined console loglevel value. <map name="all" value="info"/> works fine only in logfile.conf.xml. The same line does not work in my case in console.conf.xml for fs_cli. For example I will set "ERR" (3) and I will see on Fs_cli "CONSOLE" (0)+"ALERT" (1)+"CRIT" (2) messages. Is it possible to set on screen only one messages layer in fsi_cli? How is it possible to do that? I am doing this because alway I had full screen with this: 011-11-14 16:39:22.230114 [WARNING] ftmod_wanpipe.c:917 [s1c1][1:1] Rx Queue length exceeded 80% hreshold (9/10) 2011-11-14 16:39:22.230114 [WARNING] ftmod_wanpipe.c:917 [s1c1][1:1] Rx Queue length exceeded 80% hreshold (8/10) 2011-11-14 16:39:24.610115 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 250 to 294 2011-11-14 16:39:24.630115 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 2011-11-14 16:39:24.650130 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 2011-11-14 16:39:24.670115 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 2011-11-14 16:39:24.690126 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 2011-11-14 16:39:24.710144 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 2011-11-14 16:39:24.730125 [WARNING] ftmod_wanpipe.c:864 [s3c1][3:1] Tx idle changed from 38 to 294 and I need only notice and info messages from isdn. Thank you for answer. Best Regard, Vit

3 2

Setup FreeSwitch behind Kamailio Dispatcher.
by Henrik Aagaard Sørensen 15 Nov '11

15 Nov '11

I'm trying to get the setup Kamailio Dispatcher -> FreeSwitch to work. I've setup Kamailio via this: http://www.kamailio.org/docs/modules/stable/modules_k/dispatcher.html I've installed FreeSwitch from scratch on Ubuntu via: http://wiki.freeswitch.org/wiki/Ubuntu_Quick_Start Now, when registering extensions via Kamailio Dispatcher I'm able to call to FreeSwitch and listen to hold music. But that's it. I'm not able to call between extensions etc. Can anyone help me setting up FreeSwitch to accept registration, calls etc. from Kamailio and everything else that is needed to use FreeSwitch behind a load balancer? I'm very new to FreeSwitch, but I'm trying to use the terminal (without any GUI etc.) as I want the installation to be as clean as possible. So I would prefer very precise help, as I'm still getting hold of FreeSwitch.

5 13

My new web utility - FreeSWITCH panel
by Valery Kalinin 15 Nov '11

15 Nov '11

Hi all! I present my new online web utility for FreeSWITCH - admin panel. This application allows you to view online: - registered subscribers (Sofia) - current calls - conferences - FreeTDM channels It is also possible some Freeswitch management. Screenshot with simple help: https://sites.google.com/site/freeswitched/home/downloads/fspanel_help.png Installation guide: Upload files to your web-server with PHP support. Check modules.conf and event_socket.conf for enable module mod_event_socket Change variables if needed in fspanel.php file: $FreeSWITCHserver = '127 .0.0.1 '; $FreeSWITCHport = 8021; $FreeSWITCHpassword = 'ClueCon'; $SofiaProfiles = array('internal', 'external'); // write empty array if not used: array(); $FreeTDMspans = array('pri'); // write empty array if not used: array(); Enter in browser http://you-server-name/somedir/fspanel.html Click on menu item "settings" for choice items Tested on IE 9, Firefox 4 & 8 Home: https://sites.google.com/site/freeswitched/home/freeswitch-panel Download: https://sites.google.com/site/freeswitched/home/downloads/fspanel.zip?attre… Also available at github.

1 0

My new web utility - FreeSWITCH panel
by Valery Kalinin 15 Nov '11

15 Nov '11

Hi all! I present my new online web utility for FreeSWITCH - admin panel. This application allows you to view online: - registered subscribers (Sofia) - current calls - conferences - FreeTDM channels It is also possible Freeswitch management. Screenshot with simple help: https://sites.google.com/site/freeswitched/home/downloads/fspanel_help.png Installation guide: Upload files to your web-server with PHP support. Check modules.conf and event_socket.conf for enable module mod_event_socket Change variables if needed in fspanel.php file: $FreeSWITCHserver = '127 .0.0.1 '; $FreeSWITCHport = 8021; $FreeSWITCHpassword = 'ClueCon'; $SofiaProfiles = array('internal', 'external'); // write empty array if not used: array(); $FreeTDMspans = array('pri'); // write empty array if not used: array(); Enter in browser http://you-server-name/somedir/fspanel.html Click on menu item "settings" for choice items Tested on IE 9, Firefox 4 & 8 Home: https://sites.google.com/site/freeswitched/home/freeswitch-panel Download: https://sites.google.com/site/freeswitched/home/downloads/fspanel.zip?attre…

1 0

SIP/2.0 500 No session set by user
by Brian Wiese 15 Nov '11

15 Nov '11

Hello again everyone! I'm getting a strange result when calling from a Polycom endpoint on FS server "A" to FS server "B": About one out of ten calls won't complete with the error "SIP/2.0 500 No session set by user". If I immediately redial the number again it works. Here's my log: http://pastebin.freeswitch.org/17622 Note the response to the endpoint from server "A" on line 452. Important IP addresses: Polycom endpoint: 10.15.100.250 Server "A": 10.15.100.20 Server "B": 10.15.100.10 I'm on the latest revision (git-2f786a0 2011-10-26 12-57-59 -0500) as well. I appreciate your help. ~Brian

1 1

UUID logging - help test patch?
by Avi Marcus 14 Nov '11

14 Nov '11

If you use uuid prepending on your logging to help you grep out a call, Math wrote a patch to apply that to the multi-line SDP, too. (See http://wiki.freeswitch.org/wiki/Mod_logfile#Logging_UUIDs for how to turn on) If you can test it out and comment, the patch is here: http://jira.freeswitch.org/browse/FS-3572 Also, there's still at least 4 log types that don't get the UUID, I unfortunately still don't know enough of C & FS to check for myself why: 2011-11-03 08:41:12.696695 [INFO] switch_nat.c:589 NAT port mapping disabled 2011-11-03 08:41:12.876687 [DEBUG] switch_rtp.c:3181 Correct ip/port confirmed. 2011-11-03 08:41:12.736698 [DEBUG] mod_local_stream.c:421 Opening Stream [moh/8000] 8000hz 2011-09-16 15:44:06.776690 [DEBUG] switch_core_file.c:180 File .....v3f.wav sample rate 44100 doesn't match requested rate 8000 -Avi Marcus

1 0