- FreeSWITCH-users - FreeSWITCH Mailing Lists

Changes between versions
by Alex Lake 14 May '13

14 May '13

Is there a clever way in which one can use git/github to tell me (in human readable terms!) all the changes between version A and version B of Freeswitch?

6 8

Recommended version for production
by Telecube - John 14 May '13

14 May '13

Hi, Can someone advise what would be the recommended version to use in a production environment please? -- John

4 4

Limit concurrent calls
by Tomasz Szuster 14 May '13

14 May '13

Hello, I've set up limit for outgoing calls using http://wiki.freeswitch.org/wiki/FS_weekly_2010_12_01, especially by adding: limit hash fraud_protection calls_max_intl 32 !NORMAL_TEMPORARY_FAILURE to the dialplan. When I created second dialplan with different call_max_intl value freeswitch did not get it. It has still remember call_max_intl 32 from first dialplan. At console I've got: *Usage for fraud_protection_calls_max_intl is already at max value (32)* I've also try with: <action application="limit_execute" data="hash outbound gateway 12 bridge sofia/gateway/gateway/$1" /> Result was the same as for limit hash. My goal is to create dialplans with different calls max where calls max value are treated separately. Can you please advice how to proceed, where to look ? -- Regards. Tom

5 9

Strange CDR entry
by Bala Murugan Mahendran 14 May '13

14 May '13

I have lot of entries like 1000,1001,1002 and so on, Is someone trying to get inside? I believe they didn't in yet but how come we have cdr log like this? "1004","1004","012972598371070","public","2013-05-12 07:30:07","","2013-05-12 07:30:07","0","0","NORMAL_CLEARING","c522fb02-bad5-11e2-8eaf-7bfd76dfd5d7","","","G729","G729" "1004","1004","013972598371070","public","2013-05-12 07:30:07","","2013-05-12 07:30:07","0","0","NORMAL_CLEARING","c5571b44-bad5-11e2-8eb3-7bfd76dfd5d7","","","G729","G729" "1004","1004","014972598371070","public","2013-05-12 07:30:07","","2013-05-12 07:30:07","0","0","NORMAL_CLEARING","c58eb428-bad5-11e2-8eb7-7bfd76dfd5d7","","","G729","G729" "1004","1004","010972598371070","public","2013-05-12 07:30:08","","2013-05-12 07:30:08","0","0","NORMAL_CLEARING","c5c42d4c-bad5-11e2-8ebb-7bfd76dfd5d7","","","G729","G729" "1004","1004","0061972598371070","public","2013-05-12 07:30:08","","2013-05-12 07:30:08","0","0","NORMAL_CLEARING","c5fe993c-bad5-11e2-8ebf-7bfd76dfd5d7","","","G729","G729" "1004","1004","0041972598371070","public","2013-05-12 07:30:09","","2013-05-12 07:30:09","0","0","NORMAL_CLEARING","c63f939c-bad5-11e2-8ec3-7bfd76dfd5d7","","","G729","G729" "1004","1004","000972598371070","public","2013-05-12 07:30:09","","2013-05-12 07:30:09","0","0","NORMAL_CLEARING","c67a9f5a-bad5-11e2-8ec7-7bfd76dfd5d7","","","G729","G729" "1004","1004","006972598371070","public","2013-05-12 07:30:09","","2013-05-12 07:30:09","0","0","NORMAL_CLEARING","c6afc2fc-bad5-11e2-8ecb-7bfd76dfd5d7","","","G729","G729" "1004","1004","002972598371070","public","2013-05-12 07:30:10","","2013-05-12 07:30:10","0","0","NORMAL_CLEARING","c6ec0b5e-bad5-11e2-8ecf-7bfd76dfd5d7","","","G729","G729" "1004","1004","810972598371070","public","2013-05-12 07:29:49","","2013-05-12 07:29:49","0","0","NORMAL_CLEARING","ba7999a4-bad5-11e2-8b6f-7bfd76dfd5d7","","","G729","G729" Thanks, Bala

6 11

Dynamic external profile proxies
by Oleg Stolyar 13 May '13

13 May '13

I am very new to FreeSWITCH and would like to use it as a SIP load balancer to other (media) FreeSWITCH instances. I was thinking of using the external SIP profile and bridging incoming calls to the media instances of FreeSWITCH using some rotation mechanism (round robin, least busy, etc) My question is this: Would I need to have a separate SIP profile for each media FreeSWITCH server or can I define a profile in such a way that I can dynamically specify the proxy for each call? Thank you *Oleg*

2 2

Recommendations for Trunks from Hawaii?
by Jeff Bernhardt 13 May '13

13 May '13

Not Freeswitch specific, but... We have a couple Vitelity DIDs we use for testing, but the latency on them is fairly bad. We figure this is just because of physical distance... we're in Hawaii and Vitelity is I believe in Denver (at least that's the ip we connect to). Does anyone have recommendations for any good trunks that might be located somewhere closer (California)? There are plenty of companies here and there, but what are people using that might meet our needs? Thanks.

3 4

Sofia profile for dual-stack IPv4/v6
by Tim St. Pierre 13 May '13

13 May '13

Hello, I'm implementing FreeSWITCH in a dual-stack environment, now that we have found some endpoints that can do IPv6 properly. I have two profiles - internal and internal-ipv6. I can make calls from either, but in order to place calls so that a user could be reachable on either profile, I had to use sofia_contact(*/${dialed_user}@${dialed_domain}) This seems to work just fine, but from what I understand, it will try ALL profiles. Is there a way to have it just try specific profiles? I tried it without the */ (just user@domain) and it only came back if it was in the internal profile. This could be because I can only alias a domain to one profile at a time, and I have aliased them all to internal. For reference, here's my profile arrangement: external - trunking only, no registrations, all static IP and gateways external-alt - same as above, on an alternate IP address public - no registrations, a restricted profile just for incoming sip calls (URI calling, enum, etc.) public-ipv6 - same as above, but IPv6 fax - all our fax ATAs register to this. They all have the same domain internal - all our endpoints register here, all customer domains are aliased to this profile internal-ipv6 - IPv6 endpoints register here. We can't alias the domains, as they are already aliased above. The profile is otherwise the same, except that it is bound to an IPv6 interface, has NAT turned off, and will soon allow bypass media. Has anyone else run FreeSWITCH in a dual-stack environment? Are there any potential negative consequences to using the */ option in sofia_contact? Thanks!! -Tim

1 0

Caller ID - a moving target
by Sean Devoy 13 May '13

13 May '13

Hi, When someone dials my extension from an internal extension, my phone displays the CID Number. When I answer, the display switches to CID Name. Is that a "feature" of Cisco SPA504G phones or FS? Sean

4 4

freeswitch's db error: took too long to complete
by ZhouJianhua 13 May '13

13 May '13

Hi all, I installed freeswitch and postgresql on amazon ec2, after 1 day or 2 days, the following error occurred: switch_pgsql.c:359 Query (delete from interfaces where type='api' and name='start_local_stream' and hostname='fs01') took too long to complete or database not responding. I have to shutdown freeswitch and restart it. There is no problem on our physic machine with same configuration, only happened on amazon ec2.Anyone encountered similar problems ?

2 1

Re: [Freeswitch-users] An strange bug on starting up FreeSwitch, any solution?
by Sayyed Mohammad Emami Razavi 13 May '13

13 May '13

Hello, I downloaded FS version 1.5.0 () and made it again. my previous version was 1.3.13b+git~20130114T032717Z~d78f4ffb19 Now my problem has been solved. At mentioned server i had downloaded ffmpeg from dag resource(CentOS package source list) and after that FS went down! but with new FS the problem currently has solved!

1 0