January 2018 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Originate doubt
by Raimundo Pérez Nieves 16 Jan '18

16 Jan '18

Is not the port because 5004 is the xml transfered. And the mission number was my mistake copying. I have the right number. When I try this originate with for ex: user/1001 it works but when I use a number away from the directory it causes this trouble Enviado desde mi iPhone El 16/01/2018, a la(s) 12:51, Mirko Brankovic <mirkobrankovic(a)gmail.com> escribió: > or in bgapi you are missing last digit "2" > >> On Tue, Jan 16, 2018 at 12:51 PM, Mirko Brankovic <mirkobrankovic(a)gmail.com> wrote: >> might be the 5004 port ? >> >>> On Tue, Jan 16, 2018 at 12:46 PM, Raimundo Pérez Nieves <raimundo.perez.cuba(a)gmail.com> wrote: >>> Hi guys >>> Why this works? >>> <action application="bridge" data="sofia/external/550075372035172(a)64.34.75.23"/> >>> And this not? >>> $con->bgapi("originate","{origination_uuid=$uuid}sofia/external/55007537203517%64.34.75.23 5004"); >>> And I exchange % for @. >>> Get this error >>> 2018-01-16 11:18:39.410205 [WARNING] mod_sofia.c:4652 Cannot locate registered user 550075372035172(a)64.34.75.23 >>> _________________________________________________________________________ >>> Professional FreeSWITCH Consulting Services: >>> consulting(a)freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://confluence.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> >> >> -- >> Regards, >> Mirko > > > > -- > Regards, > Mirko

1 0

Originate doubt
by Raimundo Pérez Nieves 16 Jan '18

16 Jan '18

Hi guys Why this works? <action application="bridge" data="sofia/external/550075372035172(a)64.34.75.23"/> And this not? $con->bgapi("originate","{origination_uuid=$uuid}sofia/external/55007537203517%64.34.75.23 5004"); And I exchange % for @. Get this error 2018-01-16 11:18:39.410205 [WARNING] mod_sofia.c:4652 Cannot locate registered user 550075372035172(a)64.34.75.23

4 4

Re: [Freeswitch-users] Use Nibblebill with PostgreSQL
by igor.potjevlesch＠gmail.com 16 Jan '18

16 Jan '18

Hello, I'm still stuck with Nibblebill config. Even if the current balance is 0 or negative, the dialplan start the call. Someone would have some examples of config where this behaviour is avoided? Thank you! Regards, Igor. De : igor.potjevlesch(a)gmail.com [mailto:igor.potjevlesch@gmail.com] Envoyé : mercredi 10 janvier 2018 15:49 À : 'Madovsky' <infos(a)madovsky.org> Objet : RE: [Freeswitch-users] Use Nibblebill with PostgreSQL This is the log: Action log(INFO ${nibble_balance} is equal or lower than 0) With or without "set nibble_balance". So I guess that this variable is undefined. De : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> [mailto:igor.potjevlesch@gmail.com] Envoyé : mercredi 10 janvier 2018 15:39 À : 'Madovsky' <infos(a)madovsky.org <mailto:infos@madovsky.org> > Objet : RE: [Freeswitch-users] Use Nibblebill with PostgreSQL I don't understand what is supposed to do the SQL request? I think that, indeed, nibble_balance is not set at the moment of the condition. De : Madovsky [mailto:infos@madovsky.org] Envoyé : mardi 9 janvier 2018 21:24 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL you should remove <action application="set" data="nibble_balance" inline="true"/> since when you populate nibble_account it makes automatically the SQL request and populate nibble_balance. then don't forget to put all nibble variables on the bridge like {nibble_account=${nibble_account},etc.}sofia/xxx On 1/9/2018 8:14 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: I didn't. What does it mean "inline" in that case? I tried like this and add "inline" on all settings. So, now the dialplan looks like this: <action application="set" data="nibble_account=1" inline="true"/> <action application="set" data="nibble_rate=1" inline="true"/> <action application="set" data="nibble_minimum=1" inline="true"/> <action application="set" data="nibble_rounding=2" inline="true"/> <action application="set" data="nibble_balance" inline="true"/> <action application="nibblebill" data="heartbeat 1"/> <condition break="on-true" field="${cond(${nibble_balance} <= 0 ? YES : NO)}" expression="^YES$"> <action application="log" data="INFO ${nibble_balance} is equal or lower than 0"/> </condition> <action application="bridge" data="{nibble_account=1,nibble_rate=1,nibble_minimum=1,nibble_rounding=2,absolute_codec_string=PCMA,101,sip_invite_domain=$${ext-sip-ip}}sofia/gateway/outbound/0$1"/> The logs are showing the following outputs and the call start: 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action set(nibble_account=1) INLINE 8d308628-f555-11e7-9064-df48dc662f2c EXECUTE sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> set(nibble_account=1) 8d308628-f555-11e7-9064-df48dc662f2c 2018-01-09 16:55:44.782489 [DEBUG] mod_dptools.c:1548 SET sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> [nibble_account]=[1] 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action set(nibble_rate=1) INLINE 8d308628-f555-11e7-9064-df48dc662f2c EXECUTE sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> set(nibble_rate=1) 8d308628-f555-11e7-9064-df48dc662f2c 2018-01-09 16:55:44.782489 [DEBUG] mod_dptools.c:1548 SET sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> [nibble_rate]=[1] 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action set(nibble_minimum=1) INLINE 8d308628-f555-11e7-9064-df48dc662f2c EXECUTE sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> set(nibble_minimum=1) 8d308628-f555-11e7-9064-df48dc662f2c 2018-01-09 16:55:44.782489 [DEBUG] mod_dptools.c:1548 SET sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> [nibble_minimum]=[1] 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action set(nibble_rounding=2) INLINE 8d308628-f555-11e7-9064-df48dc662f2c EXECUTE sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> set(nibble_rounding=2) 8d308628-f555-11e7-9064-df48dc662f2c 2018-01-09 16:55:44.782489 [DEBUG] mod_dptools.c:1548 SET sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> [nibble_rounding]=[2] 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action set(nibble_balance) INLINE 8d308628-f555-11e7-9064-df48dc662f2c EXECUTE sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> set(nibble_balance) 8d308628-f555-11e7-9064-df48dc662f2c 2018-01-09 16:55:44.782489 [DEBUG] mod_dptools.c:1548 SET sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> [nibble_balance]=[UNDEF] 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action nibblebill(heartbeat 1) 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action bridge({nibble_account=1,nibble_rate=1,nibble_minimum=1,nibble_rounding=2,absolute_codec_string=PCMA,101,sip_invite_domain=}sofia/gateway/out/0123456789) 8d308628-f555-11e7-9064-df48dc662f2c |--- Dialplan: sofia/client_in/+123456789(a)A.B.C.D <mailto:sofia/client_in/+123456789@A.B.C.D> Action hangup(hangup_cause) De : Madovsky [mailto:infos@madovsky.org] Envoyé : lundi 8 janvier 2018 19:52 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL did you set nibble balance inline="true" before the condition? also check with log just after you set the var to be sure the SQL return a value On 1/8/2018 10:24 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: I basically tried this: <condition break="on-true" field="${cond(${nibble_balance} <= 0 ? YES : NO)}" expression="^YES$"> <action application="log" data="INFO ${nibble_balance} is equal or lower than 0"/> </condition> But I didn't see anything in the logs, the call begin to start. Regards, Igor De : Madovsky [mailto:infos@madovsky.org] Envoyé : vendredi 5 janvier 2018 14:44 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL Yes in a nested condition for ex. this method is more robust that trust nibblebill to do all the job On 1/5/2018 5:33 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: It means that I can test ${nibble_balance} before right? De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 20:31 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL you should make a nested condition before the bridge and if the balance not good transfer the call to hangup or something else On 1/4/2018 8:03 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: I uncommented this in the config file of nibblebill: <param name="custom_sql_lookup" value="SELECT euros AS nibble_balance FROM solde WHERE customer_id='${nibble_account}'"/> The request is working fine according to the logs, but the call is still placed with the logs: 2018-01-04 16:59:07.571051 [DEBUG] mod_nibblebill.c:422 Doing lookup query [SELECT euros AS nibble_balance FROM solde WHERE customer_id='1'] 2018-01-04 16:59:07.571051 [DEBUG] mod_nibblebill.c:430 Retrieved current balance for account 1 (balance = -0.040000) 31fe25c6-f168-11e7-a065-b10720ff818b 2018-01-04 16:59:07.571051 [DEBUG] mod_nibblebill.c:523 Comparing -0.040000 to hangup balance of 1.000000, taking into account minimum charge of 1.000000 31fe25c6-f168-11e7-a065-b10720ff818b 2018-01-04 16:59:07.571051 [DEBUG] mod_nibblebill.c:526 Balance of -0.040000 fell below allowed amount of 1.000000! (Account 1) De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 16:37 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL add an sql request into nibblebill and link it to nibble_balance variables inline in diaplan On 1/4/2018 7:35 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: Yes, why not, but I don't find how to check the balance before a bridge. De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 16:29 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL it starts because you don't have any user linked to your nibble_account so the only way to not start the call is to create a condition with the nibble balance before the bridge On 1/4/2018 7:22 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: I did this: dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1/+4425482090(a)A.B.C.D <mailto:sofia/trunk1/+4425482090@A.B.C.D> Action set(nibble_account=1) dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1 /+4425482090(a)A.B.C.D <mailto:/+4425482090@A.B.C.D> Action set(nibble_rate=1) dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1/+4425482090(a)A.B.C.D <mailto:sofia/trunk1/+4425482090@A.B.C.D> Action set(nibble_minimum=1) dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1/+4425482090(a)A.B.C.D <mailto:sofia/trunk1/+4425482090@A.B.C.D> Action set(nibble_rounding=2) dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1/+4425482090(a)A.B.C.D <mailto:sofia/trunk1/+4425482090@A.B.C.D> Action nibblebill(heartbeat 1) dca705f8-f161-11e7-9f81-b10720ff818b |--- Dialplan: sofia/trunk1/+4425482090(a)A.B.C.D Action bridge({nibble_account=1,nibble_rate=1,nibble_minimum=1,nibble_rounding=2,absolute_codec_string=PCMA,101,sip_invite_domain=}sofia/gateway/out_1/0123456789) […] 2018-01-04 16:13:47.410971 [DEBUG] mod_nibblebill.c:430 Retrieved current balance for account 1 (balance = 0.000000) dca7b05c-f161-11e7-9f9a-b10720ff818b 2018-01-04 16:13:47.410971 [DEBUG] mod_nibblebill.c:523 Comparing 0.000000 to hangup balance of 1.000000, taking into account minimum charge of 1.000000 dca7b05c-f161-11e7-9f9a-b10720ff818b 2018-01-04 16:13:47.410971 [DEBUG] mod_nibblebill.c:526 Balance of 0.000000 fell below allowed amount of 1.000000! (Account 1) But the call still starts. De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 16:09 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL the nibblebill variables must be on the bridge like <action application="bridge" data="{nibble_account=1,nibble_rate=1,etc....absolute_codec_string=PCMA,101,sip_invite_domain=$${ext-sip-ip}}sofia/gateway/out_01/0$1"/> do not use "export" since I noticed some strange behavior with it. I don't know how nibblebill behaves without a nibble_account linked to a user account, so I cannot help for this case On 1/4/2018 7:06 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: I don't have a registered user. It's a peer trusted by his IP address. During the call the credit is updated every seconds but even without credit, the call start and stop immediately. Yes I know. I will switch to more reasonable value after my tests. What do you mean by "export all nibblebill variables to the bridge"? De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 15:52 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL > <action application="set" data="nibble_account=1"/> is 1 a valid nibble_account of a registered user? > <action application="nibblebill" data="check"/> you dont' need to check, as nibblebill automatically check the balance if the nibble_account is linked to a registered user > <action application="nibblebill" data="heartbeat 1"/> be aware that heartbeat to 1 means a request to your DB every second about your issue you should export all nibblebill variables to the bridge too On 1/4/2018 6:46 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: That's the case: <condition break="on-true" expression="^\+44([1-9][0-9]{8})$" field="destination_number"> <action application="set" data="nibble_account=1"/> <action application="nibblebill" data="check"/> <action application="set" data="nibble_rate=1"/> <action application="set" data="nibble_minimum=1"/> <action application="set" data="nibble_rounding=2"/> <action application="nibblebill" data="heartbeat 1"/> <action application="bridge" data="{absolute_codec_string=PCMA,101,sip_invite_domain=$${ext-sip-ip}}sofia/gateway/out_01/0$1"/> <action application="hangup" data="hangup_cause"/> </condition> De : Madovsky [mailto:infos@madovsky.org] Envoyé : jeudi 4 janvier 2018 12:41 À : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL you must check or set nibble_account before the call On 1/4/2018 3:35 AM, igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> wrote: Hello, Finally the billing works good. Would it be possible to setup the rates in db? I don't find example or documentation related to this. Also, I don't understand why the call is allowed for bridging whereas the balance is 0 or negative? Regards, Igor. De : igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> [mailto:igor.potjevlesch@gmail.com] Envoyé : jeudi 4 janvier 2018 10:19 À : 'FreeSWITCH Users Help' <mailto:freeswitch-users@lists.freeswitch.org> <freeswitch-users(a)lists.freeswitch.org> Objet : RE: [Freeswitch-users] Use Nibblebill with PostgreSQL Hello, Thank you! Both db_dsn and odbc-dsn work. db-dsn fails. I keep the version with odbc-dsn because in that case I don't have the warning about deprecated function for versions earlier than 1.4.2 even if I run 1.6. What is the best according to you? db_dsn or odbc-dsn? I have additional questions related to nibble: 1. After hanging up the call, I see in the logs the good value: "mod_nibblebill.c:590 Billing $0.000234" but some line after there is another update: "mod_nibblebill.c:622 Rounding to precision 1.000000, total 1.000000 (0.999793 excess)". So the call is billed 1 instead of 0.000234. 2. Is it possible to setup in the db scheme different prefixes and their rate? Instead of putting them raw in the dialplan or any other config file? Thank you in advance for your clarification. Regards, Igor. De : FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] De la part de Madovsky Envoyé : mercredi 3 janvier 2018 22:18 À : freeswitch-users(a)lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> Objet : Re: [Freeswitch-users] Use Nibblebill with PostgreSQL If you compiled FS with --enable-core-odbc-support so you can use <param name="odbc-dsn" value="pgsql://hostaddr=xx.xx.xx.xx port=xxxx dbname=xxx user=xxx password='xxxx' options='-c client_min_messages=NOTICE' application_name='freeswitch'" /> you must set odbc.ini On 1/3/2018 1:02 PM, Geoff Mina wrote: I think the param is db-dsn. Not the underscore version. On Jan 3, 2018, at 12:59 PM, Sergey Safarov <s.safarov(a)gmail.com <mailto:s.safarov@gmail.com> > wrote: I used connection string <param name="db_dsn" value="pgsql://hostaddr=127.0.0.1 dbname=******* user=******* password=*******"/> Sergey ср, 3 янв. 2018 г. в 22:06, <igor.potjevlesch(a)gmail.com <mailto:igor.potjevlesch@gmail.com> >: Hello ! I try to connect Nibblebill directly to PostgreSQL but it still fails. I follow the documentation and setup the param like this: <param name="odbc_dsn" value="pgsql://A.B.C.D dbname=prepaid user=prepaid password=<hidden>"/> When I hangup a call, the logs report the following: 52c8b77c-f0b8-11e7-8d19-5566a3fb77f6 2018-01-03 20:00:19.037333 [CRIT] mod_nibblebill.c:604 Failed to log to database! Any idea on how to proceed with FS 1.6? Thank you! Regards, Igor. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

3 9

how to solve command
by Ali Haider 16 Jan '18

16 Jan '18

hiii how to solve sudo echo "deb http://files.freeswitch.org/repo/ubuntu-1604/freeswitch-1.6/ xenial main" > /etc/apt/sources.list.d/freeswitch.list bash: /etc/apt/sources.list.d/freeswitch.list: Permission denied

4 3

Freeswitch don't send a RTCP package
by Alexander Haugg 16 Jan '18

16 Jan '18

Hi, I am using the Bria 4 client with the Freeswitch Version 1.9.0+git~20170608T004121Z~00ab2b40b4~64bit (git 00ab2b4 2017-06-08 00:41:21Z 64bit) The Parameter "<param name="rtcp-audio-interval-msec" value="5000" />" is set in the SIP profile. The Client send the SDP: v=0 o=- 13160559761493634 2 IN IP4 my_ip s=Bria 4 release 4.8.1 stamp 84929 c=IN IP4 my_ip t=0 0 a=ice-ufrag:6ffe8a a=ice-pwd:943efb7d3a5ae8f3bbd86bfa8ef89e05 m=audio 59196 RTP/AVP 0 101 c=IN IP4 my_ip a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=ssrc:1606096547 cname:tId74Q/00rktO5VD a=sendrecv a=rtcp:59197 IN IP4 my_ip a=candidate:1 1 UDP 659136 my_ip 59196 typ host a=candidate:1 2 UDP 659134 my_ip 59197 typ host a=remote-candidates:1 fs_ip 30992 2 fs_ip 30993 a=ssrc:1606096547 cname:tId74Q/00rktO5VD what can i do?

1 0

Received an unsupported RTCP packet version 3
by Mikhail Demekhov 16 Jan '18

16 Jan '18

Hello! I have FreeSWITCH Version 1.6.12. After connecting partner FS-1.7 I had a lot of warning: [WARNING] switch_rtp.c:6207 Received an unsupported RTCP packet version 3 How to fix it? -- Regards, Mikhail Demekhov

2 1

i'm lost following a code path. help appreciated
by Luis Azedo 15 Jan '18

15 Jan '18

Hi, i'm using freeswitch / php esl to make some tests against a sip system. when using the deflect api, the Referred-By Header is always just the ip of freeswitch server and i expected to be the contact of the gateway i'm using as endpoint. ------------------------------------------------------------------------ send 747 bytes to udp/[10.0.0.4]:5060 at 17:05:21.010061: ------------------------------------------------------------------------ REFER sip:mod_sofia@10.0.0.7:11000 SIP/2.0 Via: SIP/2.0/UDP 10.0.0.18;rport;branch=z9hG4bKej34QSpeaBS2p Route: <sip:10.0.0.4;r2=on;lr=on;ftag=FXajgSNDr2Kgj> Route: <sip:10.0.0.4:7000;r2=on;lr=on;ftag=FXajgSNDr2Kgj> Max-Forwards: 70 From: <sip:ParkingTestCase_2@3lHj.admin>;tag=08BXDaFZgp2vQ To: "Internal ParkingTestCase DV 3" <sip:0000@3lHj.admin >;tag=FXajgSNDr2Kgj Call-ID: eb606910-de48-4545-85bb-8f00d2253a34 CSeq: 117681896 REFER Contact: <sip:ParkingTestCase_2@10.0.0.18:5060;transport=udp> User-Agent: Testing Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: path, replaces Refer-To: <sip:*3101@kamailio> *Referred-By: <sip:10.0.0.18>* Content-Length: 0 following the code, it ends in mod_sofia sending calling the nua_refer. however, i don't see anywhere in the code where tech_pvt->contact_url is initialized/used i set the sip_h_referred-by value before calling the deflect and was expecting it would be used, but the code below explicitly sets the header. my problem is that i can't find anywhere where its initialized/used/updated so a second pair of eyes is much appreciated. thanks switch (msg->message_id) { case SWITCH_MESSAGE_INDICATE_DEFLECT: { char *extra_headers = sofia_glue_get_extra_headers(channel, SOFIA_SIP_HEADER_PREFIX); char ref_to[1024] = ""; const char *var; if (!strcasecmp(msg->string_arg, "sip:")) { const char *format = strchr(tech_pvt->profile->sipip, ':') ? "sip:%s@[%s]" : "sip:%s@%s"; switch_snprintf(ref_to, sizeof(ref_to), format, msg->string_arg, tech_pvt->profile->sipip); } else { switch_set_string(ref_to, msg->string_arg); } nua_refer(tech_pvt->nh, SIPTAG_REFER_TO_STR(ref_to), SIPTAG_REFERRED_BY_STR(tech_pvt->contact_url), TAG_IF(!zstr(extra_headers), SIPTAG_HEADER_STR(extra_headers)), TAG_END());

1 0

Event Socket not displaying all events
by Raimundo Pérez Nieves 15 Jan '18

15 Jan '18

Hi, I can’t receive all events, like ringtone, exchange media, answered, etc, from sofia/external/550075372035172(a)64.34.75.23 What I am missing? Thanks iam using this dial plan: <extension name="outbound event socket"> <condition field="destination_number" data="^(5004)$">\ <action application="socket" data="127.0.0.1:8040 async"/> </condition> </extension> And this is my perl script: require ESL; use IO::Socket::INET; my $ip = "127.0.0.1"; my $sock = new IO::Socket::INET ( LocalHost => $ip, LocalPort => '8040', Proto => 'tcp', Listen => 1, Reuse => 1 ); my $dial_string = 'sofia/external/550075372035172(a)64.34.75.23'; my $codec_string = 'G729'; die "Could not create socket: $!\n" unless $sock; for(;;) { my $new_sock = $sock->accept(); my $pid = fork(); if ($pid) { print "New child pid $pid created...\n"; close($new_sock); next; } my $fd = fileno($new_sock); my $con = new ESL::ESLconnection($fd); my $info = $con->getInfo(); my $uuid = $info->getHeader("unique-id"); printf "Connected call %s, from %s\n", $uuid, $info->getHeader("caller-caller-id-number"); $con->sendRecv("event plain ALL"); $con->execute("export","nolocal:absolute_codec_string=$codec_string"); $con->execute("bridge",$dial_string); while($con->connected()) { my $e = $con->recvEvent(); if ($e) { my $name = $e->getHeader("event-name"); print "EVENT [$name]\n"; } } print "BYE\n"; close($new_sock); }

2 1

False Answer Supervision Detection in Freeswitch
by Raimundo Pérez Nieves 15 Jan '18

15 Jan '18

Hi guys, Anybody knows how deals with FAS detection in Freeswitch? Thanks

1 0

Frequent sqlite database corruption
by Jeremy Lainé 15 Jan '18

15 Jan '18

Hi all, Just as Geoff Mina recently reported, I too have encountered numerous instances of sqlite database corruptions, without any power cuts or disk failures. I have experienced this both on EC2 instances and on physical servers. I saw António Silva asked whether Geoff Mina was using wss endpoints, could you elaborate on why this might be the root cause? In the setups where I encountered the corruption, I am indeed using wss endpoints. How about you Geoff? As a workaround I am considering migrating to postgresql (core + sofia) but it's frustating not to understand the root cause of the problem. Cheers, Jeremy

7 8