September 2017 - FreeSWITCH-users - FreeSWITCH Mailing Lists

WARNING message with sipjs clients and Freeswitch.
by Miguel Jesús López Valverde 12 Sep '17

12 Sep '17

Hello newly: I send this email in case anyone knows a solution. Using FreeSwitch together with a configuration of sipjs through wws as client, I get a correct operation except for the usual message [WARNING] switch_core_media.c:3447 NO candidate ACL defined, Defaulting to wan.auto This only happens to me using sipjs as sip client, using the same accounts through other clients, like Zoiper, this message does not appear. I have tried different directives in the file autoload_configs/acl.conf.xml but none has caused the disappearance of this message. Do you know that I have to change in the FS configuration so that this message disappears? Thank you very much. <http://www.smartic.es/> Miguel J. López Valverde Dpto. Técnico. _____ Pº de la Castellana, 135 7ª pl 28046 Madrid España Tel: 900 900 368 | Móvil: (+34) 667 772 911 E-mail: <mailto:mjlopez@smartic.es> mjlopez(a)smartic.es | Web: <http://www.smartic.es/> http://www.smartic.es _____ <https://www.linkedin.com/company/consulting-smartic-solutions-s.l.> <https://twitter.com/smartic_spain> <https://www.facebook.com/cosutiesmatisolutio?ref=ts> Sus datos de carácter personal (nombre, apellidos, dirección postal y de correo electrónico, etc.) son tratados para la gestión de su relación con la Entidad, así como para el envío de información sobre nuestra actividad y la de terceros relacionadas con la actividad de Consulting Smartic Solutions, S.L., CIF: B85130037, Pº de la Castellana, 135 7ª pl 28046 Madrid. Usted puede ejercer sus derechos de acceso, rectificación, cancelación y oposición dirigiéndose por escrito, con copia de un documento que acredite su identidad, a la dirección info (arroba) smartic.es. Este mensaje puede contener información confidencial. Si usted no es su destinatario, no debe leerlo, copiarlo, distribuirlo, ni hacer uso de la información que contiene. En este caso, por favor, llámenos o comuníquenoslo por escrito y borre este mensaje de su sistema --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus

1 0

2 person video conference layout
by Peter Baines 12 Sep '17

12 Sep '17

Hello, I am trying to create a conference layout for a two person conference only where they only see each other. i.e. Person A sees Person B Person B sees Person A Is this possible with the conference layout system? Regards, Peter

3 2

TDM-to-TDM Pass-through Media
by Nandy Dagondon 11 Sep '17

11 Sep '17

Hello folks, I have a setup wherein I inserted FS in-between a PSTN exchange and a PABX linked via E1 R2. My TDM card has dual E1 ports - port A is connected to the exchange and port B to the PABX. If there's a call that pass-through FS (EXCH > PABX and vice-versa), I want incoming media from one port to immediately sent to the other port. What mode should I set in the dialplan? proxy_media or bypass_media? I have read the Wiki on proxy_media. It's very clear to me re handling of TDM media. Thanks in advance for the inputs. /Nandy

5 9

Re: [Freeswitch-users] PortAudio and Windows devices
by Michael Jerris 11 Sep '17

11 Sep '17

https://freeswitch.org/jira/browse/FS-10663 <https://freeswitch.org/jira/browse/FS-10663> fixed in master now. Thanks Andrey! > On Sep 9, 2017, at 9:04 PM, Clive Lansink <clive(a)lansink.co.nz> wrote: > > Hi again everyone. > > OK I appreciate that nobody has yet answered this but now I have more info that may help. > > I succeeded in building the Freeswitch executable for Windows from the source. I git cloned version 1.6.19 which I understand is the most recent stable release. I am using Visual Studio 2015 Express. > > I first built the debug version 64-bit. There were three errors but at least there was an executable so I ran that. Now the pa devlist command lists my sound devices so that works. Also the debug information indicates that it is using DirectSound. I actually haven't made a call because of another issue but at least I can confirm that mod_portaudio sees my audio devices in this situation. > > Then I cleaned the solution and built the release version. Again I got three errors but again there was an executable so I ran that. Now the pa devlist command produces no devices. > > This suggests to me that something is amiss with the process for generating the release version for Windows which also makes the Windows installer, that impacts on PortAudio. In that case, the result In my experience is that PortAudio just doesn't work because it doesn't see any audio devices. > > It's beyond me I'm afraid to figure out the difference here. I'm just not experienced with Visual Studio to understand what is going on with these two scenarios. > > Hope this helps. > > > Clive Lansink > Email: Clive(a)Lansink.Co.NZ > Phone: +64 9 520-4242 > Mobile: +64 21 663-999 > Fax: +64 21 789-150 > > -----Original message----- > From: Clive Lansink <clive(a)lansink.co.nz> > To: "Freeswitch users list" <freeswitch-users(a)lists.freeswitch.org> > Subject: [Freeswitch-users] PortAudio and Windows devices > Reply-to: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Fri, 8 Sep 2017 10:03:32 +1200 > > > Hi everyone. Can someone please help with the following problem? I have spent several hours on this today, just googling around, and although I think I am not the only one with this problem, I haven't actually found the solution. > > Problem is PortAudio reports there are no input and output devices. I am running Freeswitch on Windows 10 64-bit. The Freeswitch installer is FreeSWITCH-1.6.18-x64-Release.msi which I downloaded recently from files.freeswitch.org. I should explain that I have been using Freeswitch for a number of years and PortAudio used to work, even on this Windows 10 PC. The problem seems to be with the more recent versions of Freeswitch. > > We know that Freeswitch for Windows includes PortAudio. That's good because I don't know how to build Freeswitch for Windows. I just know how to install and use it. > > I think I read somewhere that the Freeswitch PortAudio is built for DirectEx. I came across the Dxdiag tool which tells me about DirectEx devices. I have several input and output devices on this machine, but Dxdiag only lists one output device and it lists no input devices. It tells me I have DirectEx version 12. > > I do a lot of programming in Python and that includes a Python module that provides bindings for PortAudio. That code still works. > > I read that PortAudio by default is built for MME, or maybe it is PyAudio that is built for MME. Whatever the case, that code works. > > But if Freeswitch's PortAudio module is built for DirectEx, could there be a problem with DirectEx on Windows 10? I just get the impression that Microsoft is favouring newer Windows sound APIs. Issuing the pa devlist command just lists nothing so it is as if it is just not seeing any devices, but they are certainly there. > > I think this has been a problem for several years because I have Freeswitch version 1.5.15 on another Windows 10 64-bit PC and PortAudio on that PC has the same problem. I just haven't had to use it on that PC. > > By the way, I did try running Freeswitch in console mode with administrator privileges and it made no difference. > > I hope someone can suggest something to help me fix this problem. > > > Clive Lansink > Email: Clive(a)Lansink.Co.NZ > Phone: +64 9 520-4242 > Mobile: +64 21 663-999 > Fax: +64 21 789-150 >

1 0

Brazilian Portuguese ASR
by Saumar Hajjar 11 Sep '17

11 Sep '17

Hi, I'm looking for a FreeSWITCH supported ASR engine that works well with Brazilian Portuguese - preferably tested in a production system. Any ideas? Thanks

2 2

Re: [Freeswitch-users] PortAudio and Windows devices
by Gregor Nanger 11 Sep '17

11 Sep '17

Hi, in VS go to Build/Configuration Manager and see if mod_portaudio project is selected for build. Maybe it builds without it? Or post errors you get while building solution. 2017-09-10 3:04 GMT+02:00 Clive Lansink <clive(a)lansink.co.nz>: > Hi again everyone. > > OK I appreciate that nobody has yet answered this but now I have more info > that may help. > > I succeeded in building the Freeswitch executable for Windows from the > source. I git cloned version 1.6.19 which I understand is the most recent > stable release. I am using Visual Studio 2015 Express. > > I first built the debug version 64-bit. There were three errors but at > least there was an executable so I ran that. Now the pa devlist command > lists my sound devices so that works. Also the debug information indicates > that it is using DirectSound. I actually haven't made a call because of > another issue but at least I can confirm that mod_portaudio sees my audio > devices in this situation. > > Then I cleaned the solution and built the release version. Again I got > three errors but again there was an executable so I ran that. Now the pa > devlist command produces no devices. > > This suggests to me that something is amiss with the process for > generating the release version for Windows which also makes the Windows > installer, that impacts on PortAudio. In that case, the result In my > experience is that PortAudio just doesn't work because it doesn't see any > audio devices. > > It's beyond me I'm afraid to figure out the difference here. I'm just not > experienced with Visual Studio to understand what is going on with these > two scenarios. > > Hope this helps. > > > Clive Lansink > Email: Clive(a)Lansink.Co.NZ > Phone: +64 9 520-4242 > Mobile: +64 21 663-999 > Fax: +64 21 789-150 > > -----Original message----- > From: Clive Lansink <clive(a)lansink.co.nz> > To: "Freeswitch users list" <freeswitch-users(a)lists.freeswitch.org> > Subject: [Freeswitch-users] PortAudio and Windows devices > Reply-to: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> > Date: Fri, 8 Sep 2017 10:03:32 +1200 > > > Hi everyone. Can someone please help with the following problem? I have > spent several hours on this today, just googling around, and although I > think I am not the only one with this problem, I haven't actually found the > solution. > > Problem is PortAudio reports there are no input and output devices. I am > running Freeswitch on Windows 10 64-bit. The Freeswitch installer is > FreeSWITCH-1.6.18-x64-Release.msi which I downloaded recently from > files.freeswitch.org. I should explain that I have been using Freeswitch > for a number of years and PortAudio used to work, even on this Windows 10 > PC. The problem seems to be with the more recent versions of Freeswitch. > > We know that Freeswitch for Windows includes PortAudio. That's good > because I don't know how to build Freeswitch for Windows. I just know how > to install and use it. > > I think I read somewhere that the Freeswitch PortAudio is built for > DirectEx. I came across the Dxdiag tool which tells me about DirectEx > devices. I have several input and output devices on this machine, but > Dxdiag only lists one output device and it lists no input devices. It tells > me I have DirectEx version 12. > > I do a lot of programming in Python and that includes a Python module that > provides bindings for PortAudio. That code still works. > > I read that PortAudio by default is built for MME, or maybe it is PyAudio > that is built for MME. Whatever the case, that code works. > > But if Freeswitch's PortAudio module is built for DirectEx, could there be > a problem with DirectEx on Windows 10? I just get the impression that > Microsoft is favouring newer Windows sound APIs. Issuing the pa devlist > command just lists nothing so it is as if it is just not seeing any > devices, but they are certainly there. > > I think this has been a problem for several years because I have > Freeswitch version 1.5.15 on another Windows 10 64-bit PC and PortAudio on > that PC has the same problem. I just haven't had to use it on that PC. > > By the way, I did try running Freeswitch in console mode with > administrator privileges and it made no difference. > > I hope someone can suggest something to help me fix this problem. > > > Clive Lansink > Email: Clive(a)Lansink.Co.NZ > Phone: +64 9 520-4242 > Mobile: +64 21 663-999 > Fax: +64 21 789-150 > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org -- Gregor Nanger *CTO* t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485 • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia • www.infomedia.si

2 1

Careful out there, guys..
by David Villasmil 11 Sep '17

11 Sep '17

I got this on a kamailio box: From: a'or'3=3--<sip:a'or'3=3--(a)13.58.167.54>;tag=cdecd76f Of course, nothing happened, just pointing it out. Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337 ᐧ

2 1

Strange FROM in SIP header
by Dmitry Mordovin 11 Sep '17

11 Sep '17

Hello, I set ANI number like this: [origination_caller_id_name="1234567",origination_caller_id_number=1234567] in bridge. Then in trace I see Invite message where From looks like /From: "1234567" <sip:FreeSWITCH@x.x.x.x>;tag=ypt0Kt3Q0em7j/ Anybody knows why *sip:FreeSWITCH* instead *sip:1234567* ? BR Dmitry

2 1

use of information with query 'sofia status' and locks in internal interface
by Miguel Jesús López Valverde 11 Sep '17

11 Sep '17

Hello, good afternoon. I send this email to see if anyone can give me information about the meaning of the values (2) after the RUNNING state obtained on the query sofia status. I searched for forums and books, but I find nothing explanatory. freeswitch@ip-xxx-xxx-xxx-xxx> sofia status Name Type Data State ============================================================================ ===================== external profile sip:mod_sofia@xxx.xxx.xxx.xxx:5080 RUNNING (0) external profile sip:mod_sofia@xxx.xxx.xxx.xxx:5081 RUNNING (0) (TLS) internal profile sip:mod_sofia@xxx.xxx.xxx.xxx:5060 RUNNING (2) internal profile sip:mod_sofia@xxx.xxx.xxx.xxx:5061 RUNNING (2) (TLS) ============================================================================ ===================== 2 profiles 0 aliases It happens sometimes that this value rises above 2 in the internal interface, I do not know if it is casual, but it blocks that interface and does not respond to sip requests. To identify this problem I have traversed the log files and nothing appears that indicates what may be happening and it becomes necessary to pull and lift the freeswitch service to re-handle the sip requests correctly. Also, from console, if the sofia status profile internal command is executed, no response is obtained and the query must be canceled. Thank you very much. <http://www.smartic.es/> Miguel J. López Valverde Dpto. Técnico. _____ Pº de la Castellana, 135 7ª pl 28046 Madrid España Tel: 900 900 368 | Móvil: (+34) 667 772 911 E-mail: <mailto:mjlopez@smartic.es> mjlopez(a)smartic.es | Web: <http://www.smartic.es/> http://www.smartic.es _____ <https://www.linkedin.com/company/consulting-smartic-solutions-s.l.> <https://twitter.com/smartic_spain> <https://www.facebook.com/cosutiesmatisolutio?ref=ts> Sus datos de carácter personal (nombre, apellidos, dirección postal y de correo electrónico, etc.) son tratados para la gestión de su relación con la Entidad, así como para el envío de información sobre nuestra actividad y la de terceros relacionadas con la actividad de Consulting Smartic Solutions, S.L., CIF: B85130037, Pº de la Castellana, 135 7ª pl 28046 Madrid. Usted puede ejercer sus derechos de acceso, rectificación, cancelación y oposición dirigiéndose por escrito, con copia de un documento que acredite su identidad, a la dirección info (arroba) smartic.es. Este mensaje puede contener información confidencial. Si usted no es su destinatario, no debe leerlo, copiarlo, distribuirlo, ni hacer uso de la información que contiene. En este caso, por favor, llámenos o comuníquenoslo por escrito y borre este mensaje de su sistema --- El software de antivirus Avast ha analizado este correo electrónico en busca de virus. https://www.avast.com/antivirus

3 4

feature access code for call transfer
by Ketan Kothari 11 Sep '17

11 Sep '17

Hello there, In Asterisk i'm using *2 as call transfer and its working fine. *Is there any feature access code for call transfer for manually?* I have tested call transfer using button which available in soft-phone and its working fine. But i want to transfer manually without using button. Any suggestion would be helpful.

2 3