March 2016 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Better results from mod_vmd
by Abaci B 05 Apr '16

05 Apr '16

I just tried mod_avmd and mod_vmd and seem to have the same issue, my question is if someone has this working with Panasonic answering machine and Verizon Wireless (as well as other US wireless carriers) voicemail, what change if any should I apply to get it working. Thanks for the help On Thu, Aug 20, 2009 at 8:36 PM, Matthew Fong <mattdfong(a)gmail.com> wrote: > I changed > > /*! Minimum time for a beep. */ > #define MIN_TIME 8000 > to 6500 and it seemed to work, but I'm not sure how many false positives I > will get in a real-world environment. at 4000 it fired the event like 5 > times in a session, but 6500 only once. Do you think I should expect a lot > of false positives after changing this value? > > --matt > http://www.hellohunter.com > > On Thu, Aug 20, 2009 at 4:54 PM, Eric des Courtis < > eric.des.courtis(a)gmail.com> wrote: > >> Matt, >> >> As is mod_vmd will not detect tones shorter then 138ms. However I >> could get that value down to ~30ms at best by making a few >> modifications to the algorithm. >> >> Cheers. >> >> Eric des Courtis >> >> >> On Thu, Aug 20, 2009 at 7:51 PM, Eric des >> Courtis<eric.des.courtis(a)gmail.com> wrote: >> > Matt, >> > >> > For your information the tones you gave me are exactly 738Hz. If you >> > want to try that tone detection thing. >> > >> > Cheers. >> > >> > Eric des Courtis >> > >> > On Thu, Aug 20, 2009 at 2:20 PM, Michael Collins<msc(a)freeswitch.org> >> wrote: >> >> >> >> >> >> On Thu, Aug 20, 2009 at 11:06 AM, Steve Underwood <steveu(a)coppice.org> >> >> wrote: >> >>> >> >>> On 08/20/2009 05:22 AM, Michael Collins wrote: >> >>> > >> >>> > There is no noise on those 3 beeps. In fact, for something >> that's >> >>> > been >> >>> > through ulaw/alaw compression those beeps are very clean. They >> are >> >>> > quite >> >>> > short, though. >> >>> > >> >>> > >> >>> > Heck yeah they're short! Steve, in your experience is there a >> >>> > practical way to detect a beep that short without chewing up system >> >>> > resources or having lots of false positives? >> >>> > -MC >> >>> > >> >>> The tone samples I just looked at are about 130ms long. The problem is >> >>> the detector is trying to be a very open ended detector of anything >> >>> narrowband enough to be a single tone, and of any duration beyond some >> >>> small minimum. Its difficult to make such a thing voice immune unless >> >>> you can also count on a very large signal to noise ratio. With a >> digital >> >>> trunk you can probably rely on a large SNR, but what happens when >> people >> >>> use analogue lines? There is a reason why DTMF detectors try hard to >> >>> work down to about 10dB SNR. :-) >> >>> >> >>> Steve >> >> >> >> Thanks for the lesson uncle Steve! I'm guessing that the OP will need >> a new >> >> strategy. Possibly waiting for silence? Not sure what's the best way >> to go >> >> but I'm interested in hearing if someone has a solution. >> >> >> >> -MC >> >> >> >> >> >> >> >> _______________________________________________ >> >> FreeSWITCH-users mailing list >> >> FreeSWITCH-users(a)lists.freeswitch.org >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> UNSUBSCRIBE: >> http://lists.freeswitch.org/mailman/options/freeswitch-users >> >> http://www.freeswitch.org >> >> >> >> >> > >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

5 17

Unable to conmplie mod_shout
by sunil more 04 Apr '16

04 Apr '16

Hello All,I am trying to compile freeswitch latest commit on Ubuntu Server and I am getting stuck while compiling mod_shout. It asked me for adding dependency libmpg123-dev. I have this lib package already installed on my machine. However i still get stuck over this error. Please help me.Operating system:Distributor ID: UbuntuDescription: Ubuntu 14.04.3 LTSRelease: 14.04Codename: trusty Error:making all mod_shoutmake[4]: Entering directory `/usr/local/src/freeswitch/src/mod/formats/mod_shout'Makefile:895: *** You must install libmpg123-dev to build mod_shout. Stop.make[4]: Leaving directory `/usr/local/src/freeswitch/src/mod/formats/mod_shout'make[3]: *** [mod_shout-all] Error 1make[3]: Leaving directory `/usr/local/src/freeswitch/src/mod'make[2]: *** [all-recursive] Error 1make[2]: Leaving directory `/usr/local/src/freeswitch/src'make[1]: *** [all-recursive] Error 1make[1]: Leaving directory `/usr/local/src/freeswitch'make: *** [all] Error 2 Regards,Sunil More

3 2

Can mod_cdr_csv write to multiple files?
by vfclists . 31 Mar '16

31 Mar '16

The cdr_csv.conf uses the default-template option to select the output format for the csv file. <param name="default-template" value="example"/> Is there some option for multiple files, such as generating output for Postgres and say Linksys? -- Frank Church ======================= http://devblog.brahmancreations.com

3 2

How to use $0 in dialplan?
by vfclists . 31 Mar '16

31 Mar '16

This may be due to my ignorance on how regexes are matched to parts of the dialled number. I am testing a new trunk in the dialplan by routing a single number through it. All the other numbers use the existing trunk and will be switched over later. This means I match the whole number and use it in the dial plan. However when I use $0 on its on in the dial string it works okay, but when I prefix it, eg 240$0 the $0 is not translated to the dialled number and is sent literally to the provider with the obvious results. <!-- route 1234 numbers through trunkxxx -> <condition field="destination_number" break="on-true" expression="^1234567890$"> <action application="bridge" data="sofia/gateway/trunkxxx/240$0"/> </condition> What do I need to do to send the whole matched number prefixed or suffixed with some other numbers? -- Frank Church ======================= http://devblog.brahmancreations.com

2 2

codec changed
by amani mansour 31 Mar '16

31 Mar '16

Hi, can i please play back a .pcap file ? because when i converted this file .pcap to new file .wav the codec is changed ,can you help me please ?? best regards amani

2 3

Re: [Freeswitch-users] Memory allocation "switch_core_session_alloc"
by Ahmed habiba 31 Mar '16

31 Mar '16

Mainly I’m not writing a new module, I’m modifying mod_spy to allow spying current active called without providing uuid, mainly I did the below: 1-Creat new hash map to contain all bridged calls(userid@domain as key, and UUID as value). 2-when I receive any spy request I query the hash map, using userid@domain, if I find a uuid and add it as if I get it in command “userspy userid@domain uuid “ 3-then I continue. The point that I try to allocate the memory on session level and once the call get hangup I remove it from the hash map, however this doesn’t work as I expect only one hangup request comes and accordingly one entry from hasp being removed. I attached here the code for your review From: Anthony Minessale <anthony.minessale(a)gmail.com <mailto:anthony.minessale@gmail.com>> Subject: Re: [Freeswitch-users] Memory allocation "switch_core_session_alloc" Date: March 31, 2016 at 1:51:48 AM GMT+3 To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Reply-To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Correct. The memory is allocated from the session's pool and will not be valid when the call ends. For persistent memory allocation, create your own pool when the module loads, (or use the one passed to you in the init function) and use switch_core_alloc instead. What module are you writing? On Wed, Mar 30, 2016 at 4:48 PM, Ahmed habiba <ahabiba(a)gmail.com <mailto:ahabiba@gmail.com>> wrote: Hi, I’m trying to use “switch_core_session_alloc” in a new module however I notice in documentation the below note, does this mean that once the session hangup this memory segment will not be valid anymore and I should not use this segment again?, your kind feedback will be appreciated. "Note: the memory will be in scope as long as the session exists" Thanks, Ahmed Habiba. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> -- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ <http://freeswitch.org/> ☞ http://cluecon.com/ <http://cluecon.com/> ☞ http://twitter.com/FreeSWITCH <http://twitter.com/FreeSWITCH> ☞ irc.freenode.net <http://irc.freenode.net/> #freeswitch ☞ http://freeswitch.org/g+ <http://freeswitch.org/g+> ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s <https://www.youtube.com/watch?v=9XXgW34t40s> https://www.youtube.com/watch?v=NLaDpGQuZDA <https://www.youtube.com/watch?v=NLaDpGQuZDA>

1 0

Make current problem
by Miha 31 Mar '16

31 Mar '16

Hi trying to upgrade on fly my 1.5 version of FS but getting this: make[1]: *** [libs/libvpx/Makefile] Error 1 make[1]: Leaving directory `/usr/local/src/freeswitch' make: *** [current] Error 2 You have mail in /var/spool/mail/root Is here any fix solution? tnx miha

4 8

Master and slave warm standby in production
by Dmitry Mordovin 31 Mar '16

31 Mar '16

Dear friends! Anybody use Postgres 9.5 warm standby in production? Which schemes you use? My setup: - 2 DB servers (master and slave) - 4 APP servers (tomcat) Each tomcat server have JDBC connect to master and prepared config for slave. Business task permit switch between DB server on APP servers manually when failover. What is the best scheme in my configuration? BR, Dmitry

1 0

[Mute A-Party]
by Bilal Abbasi 31 Mar '16

31 Mar '16

Hi Users, Do Freeswitch has a setting to mute the A-Party, I only want one way audio (yes many had problems with this..:-P). Any suggestions. Regards Abbasi

2 2

Memory allocation "switch_core_session_alloc"
by Ahmed habiba 30 Mar '16

30 Mar '16

Hi, I’m trying to use “switch_core_session_alloc” in a new module however I notice in documentation the below note, does this mean that once the session hangup this memory segment will not be valid anymore and I should not use this segment again?, your kind feedback will be appreciated. "Note: the memory will be in scope as long as the session exists" Thanks, Ahmed Habiba.

2 1