March 2015 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Freeswitch --> Faxing issue
by Martin Schöpfer (GMX) 09 Mar '15

09 Mar '15

Hello, can anyone help me by my config for faxing with freeswitch. I have testet al functions of spandsp also to set the software Modems active and receive faxes with hylafax but nothing works. Thats the function I want to get inbound Sip-provider à Freeswitch à Cisco SPA3102 Line 1(T.28 enabled) à hp fax or another For now i´m getting the message no fax detected from my faxing maschine Outbound Hp fax or another à Cisco SPA3102 Line 1 à Freeswitch à Sip-provider . There I get the message phone busy always I know the other faxing maschine isn busy thats my second The softmodem are also always busy I cant check the function by cu l FS because it tells me line in use. Freeswitch Version is the latest master branch of 1.4 Thanks for your advice Martin

2 1

issue terminating outbound calls in freeswitch
by David Montecillo 09 Mar '15

09 Mar '15

Hi Guys, Im using GOIP(GSM Over IP) to make outbound calls in freeswitch but I have a problem terminating the call. If the recipient ends the call from its end the call terminates normally but whenever I end a call from my end the GOIP thinks its still engage in a call so when I try to make another outbound call it fails. I need to reset the GOIP to make another call. Regards, Dave Monte

2 1

SIP Trunk
by Richard Mace 09 Mar '15

09 Mar '15

Hi, I have a trunk that currently works with Asterisk, and I am trying to get it working with FreeSWITCH. The Asterisk config is: [out_trunk] disallow=all host=sip.voip-unlimited.net username=username fromuser=username secret=password type=peer dtmfmode=rfc2833 nat=no context=incoming-sip insecure=invite allow=alaw fromdomain=voip-unlimited.net Any idea how I would configure the same in within FreeSWITCH please, as my current attempt doesn't seem to be working? Thanks very much in advance Richard

4 5

Regex
by Richard Mace 09 Mar '15

09 Mar '15

Hi, Can I just confirm that the following: <extension name="wph_out_work"> <condition field="destination_number" expression="^9(0\d{10})$"> <action application="bridge" data="sofia/gateway/wph-office/$1"/> </condition> </extension> Would route all calls that were 90 and then another 10 digits, to the gateway wph-office by just passing the number beginning with the 0 Thanks Richard

6 6

Re: [Freeswitch-users] NATIVE SQL ERR [database disk image is malformed]
by Sergey Safarov 09 Mar '15

09 Mar '15

Nandy, online UPS will protect you data from this error вс, 8 марта 2015, 14:47, Nandy Dagondon <nandy1925(a)gmail.com>: > Hi Moishe, > > The corruption happened even without power failures. I begin to suspect > that an electrical surge or noise is causing this corruption. A line > conditioner is needed in this case. > > Thanks for your input re other databases. > > /Nandy > > > > On Sun, Mar 8, 2015 at 10:58 AM, Moishe Grunstein <max(a)nysolutions.com> > wrote: > >> Although more common with SQlite, any Db can get corrupt from an >> unclean shutdown, you should look in to why you the server is losing power, >> get a UPS that can cleanly shut down the server in an even of a long power >> outage. >> >> >> >> Thanks, >> >> >> >> Moishe Grunstein >> >> Tornado Computer Systems, Inc. >> >> 212.400.7650 888.IPPBX.US >> *Service Request Email: support(a)nysolutions.com <support(a)nysolutions.com> >> * >> >> [image: cid:image001.jpg@01C72F94.9EE45D60] <http://www.nysolutions.com/> >> >> Computer Networking * Managed Services * IP Video Surveillance * Network >> Assessments * Web Solutions * Voice over IP * Disaster Recovery * Network >> Security * Site Surveys * CMS >> >> >> >> *From:* freeswitch-users-bounces(a)lists.freeswitch.org [mailto: >> freeswitch-users-bounces(a)lists.freeswitch.org] *On Behalf Of *Nandy >> Dagondon >> *Sent:* Saturday, March 7, 2015 9:32 PM >> *To:* FreeSWITCH Users Help >> *Subject:* Re: [Freeswitch-users] NATIVE SQL ERR [database disk image is >> malformed] >> >> >> >> I made a backup copy of the SQLite file. I made a script that 1) >> shutdowns FS; 2) copy the backup copy; 3) start FS again. >> >> >> >> I encounter this problem several times. So, is it better if I switch to >> PostgreSQL or MySQL? >> >> >> Tks, >> >> /Nandy >> >> >> >> On Fri, Mar 6, 2015 at 7:54 PM, Muhammad Naseer Bhatti <nbhatti(a)gmail.com> >> wrote: >> >> >> >> You seem to be using SQLite for core db. Remove the db files from your >> FreeSWITCH install location /db and restart FreeSWITCH. >> >> >> >> — >> >> Thanks, >> >> Muhammad Naseer Bhatti >> >> >> >> >> From: Aqs Younas <aqsyounas(a)gmail.com> <aqsyounas(a)gmail.com> >> Reply: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org>> >> <freeswitch-users(a)lists.freeswitch.org> >> Date: March 6, 2015 at 2:43:22 PM >> To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org>> >> <freeswitch-users(a)lists.freeswitch.org> >> Subject: [Freeswitch-users] NATIVE SQL ERR [database disk image is >> malformed] >> >> >> >> Hi, users. >> >> After power failure on my server, now when I start my freeswitch I see >> these errors logs on my freeswitch. >> >> state='CS_ROUTING',cid_name='12397284003',cid_num='12397284003 >> ',callee_name='',callee_num='',sent_callee_name='',sent_callee_num='',ip_addr='216.55.169.165',dest=' >> 18572166595',dialplan='XML',context='public',presence_id='',presence_data='' >> where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:19.447128 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set state='CS_EXECUTE' where >> uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:19.646659 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set application='sched_hangup',application_data='+10800 >> alloted_timeout',presence_id='',presence_data='' where >> uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:19.846678 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set >> application='answer',application_data='',presence_id='',presence_data='' >> where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:20.046670 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set >> read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' >> where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:20.246667 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set >> read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' >> where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> 2015-03-06 11:29:20.447279 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR >> [database disk image is malformed] >> update channels set >> read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' >> where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' >> >> How can I resolve this on my server? >> >> I was using mysql database to dump my cdr using mod_json_cdr. >> >> Thanks for you help. >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org

2 1

illegal instruction
by Andrew 08 Mar '15

08 Mar '15

Hi, I have an odd issue. I was going to run out of the box FreeSWITCH on a windows server and just by double clicking on freeswitch.exe I get a crash. When I did a debug I found it was illegal instruction error. If I remove mod_spandsp The program starts up fine. I then try to do a tone detection and then the program crashes again. What would cause the same release code to work on one server but crash on another server? Andrew

2 1

NATIVE SQL ERR [database disk image is malformed]
by Aqs Younas 08 Mar '15

08 Mar '15

Hi, users. After power failure on my server, now when I start my freeswitch I see these errors logs on my freeswitch. state='CS_ROUTING',cid_name='12397284003',cid_num='12397284003',callee_name='',callee_num='',sent_callee_name='',sent_callee_num='',ip_addr='216.55.169.165',dest='18572166595',dialplan='XML',context='public',presence_id='',presence_data='' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:19.447128 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set state='CS_EXECUTE' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:19.646659 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set application='sched_hangup',application_data='+10800 alloted_timeout',presence_id='',presence_data='' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:19.846678 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set application='answer',application_data='',presence_id='',presence_data='' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:20.046670 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:20.246667 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' 2015-03-06 11:29:20.447279 [ERR] switch_core_sqldb.c:587 NATIVE SQL ERR [database disk image is malformed] update channels set read_codec='PCMU',read_rate='8000',read_bit_rate='64000',write_codec='PCMU',write_rate='8000',write_bit_rate='64000' where uuid='d1dabf5d-b0e5-49e1-a2a4-64fab587214b' How can I resolve this on my server? I was using mysql database to dump my cdr using mod_json_cdr. Thanks for you help.

4 4

Re: [Freeswitch-users] sessions and CS_INIT events
by Juan Pablo L. 07 Mar '15

07 Mar '15

Thank you very much for the advise. I accidentally found it to be useful as well. --- Original Message --- From: "Anthony Minessale" <anthony.minessale(a)gmail.com> Sent: March 6, 2015 2:23 PM To: "FreeSWITCH Users Help" <freeswitch-users(a)lists.freeswitch.org> Subject: Re: [Freeswitch-users] sessions and CS_INIT events You probably want to look at the dialplan module interface as well. And pay attention to the direction variable to distinguish inbound from out bound Especially at the routing state not init. On Thu, Mar 5, 2015 at 12:05 PM, Juan Pablo L. <jpablolorenzetti(a)hotmail.com > wrote: > Hi, yes i had a look at it, and yes the needs are similar, i used it at > the beginning > to get started, and i m using as a reference at this point but it seems > that the use cases > are different . thanks! > > > > ------------------------------ > From: mike(a)jerris.com > Date: Thu, 5 Mar 2015 12:46:28 -0500 > > To: freeswitch-users(a)lists.freeswitch.org > Subject: Re: [Freeswitch-users] sessions and CS_INIT events > > Given the similarity in purpose, I would look closely at how > mod_nibblebill interfaces with freeswitch. It sounds like your interface > needs are nearly identical. > > > On Mar 5, 2015, at 9:23 AM, Juan Pablo L. <jpablolorenzetti(a)hotmail.com> > wrote: > > Thank you very much guys for your contributions. > > I m doing it as a module for couple of reasons, being the > most important (i believe) performance, because the module > i m working on is to do real time charging of voice calls on a switch > that is already serving as a RBT service plus a bunch of IVR's to purchase > services, this is for a ~150K user base on a single machine (cold standby) > this switch is also scheduled to soon start providing hosted PBX services, > > so going the script direction > i personally dont see that as an option at all. I do use scripts for small > no so much used > much simpler stuff though, e.g: a lua script takes care of authenticating > users > when doing international calls from company extensions in the hosted PBX > solution. > > The other reason i chose to do > this as a module because C is the language i feel more comfortable with. > i hope this clarifies i little bit this. > > Moving on, right now i m developing on a test freeswitch that we have and > yes i noticed > that subscribing to the CS_INIT event does represent a big problem > because i get notified for every single of those events that is generated > on > freeswitch which would be very inconvenient because as i mentioned, the > same > switch does many other things that i m not interested in, so i m going to > try the advise > provided and try to do it in the dial plan, i will explore this option. > > thank you very much all! > > > > > > > Date: Thu, 5 Mar 2015 14:19:51 +0100 > > From: ssinyagin(a)gmail.com > > To: freeswitch-users(a)lists.freeswitch.org > > Subject: Re: [Freeswitch-users] sessions and CS_INIT events > > > > but for the task that OP has described, writing (and maintaining it in > > the long term) a module is really an overkill. Plus, he would also > > need to take care of multithreading within FreeSWITCH, as well as > > memory management, etc. > > > > Also, a module makes sense if it's some common task which can be > > re-used by others and published as open source. If it's some > > closed-source module for a specific enterprise task that Juan has, it > > just doesn't make sense and too much risk for a long-term solution. > > > > > > > > > > > > On Thu, Mar 5, 2015 at 1:56 PM, Vik Killa <vipkilla(a)gmail.com> wrote: > > > It all depends on what you are trying to do with your module. > > > You can use a dialplan handler in your module (see mod_enum for > example) to > > > route inbound calls using your custom dialplan. > > > You can use a state handler in your module and bind to channel states > (much > > > like binding to events). > > > You can create a dialplan app in your module to execute code when the > app is > > > called in dialplan > > > (Example: <application action="mycustom_module" data="${uuid} arg1 > arg2"/>) > > > You can use an endpoint in your module to originate calls outbound (see > > > mod_lcr or mod_callcenter for an example) > > > Also, you can create an API for your module > > > > > > IMO creating a module is much more powerful than using a script with > ESL. > > > But if you are going to create a module, you really don't need to mess > with > > > events (unless they are very specific events like CUSTOM::) because > your > > > module has access to much of the freeswitch core. > > > > > > Thanks. > > > > > > > > > > > > On Thu, Mar 5, 2015 at 5:07 AM, Stanislav Sinyagin < > ssinyagin(a)gmail.com> > > > wrote: > > >> > > >> why at all do you need it to be a C module inside FreeSWITCH? > > >> > > >> Why not writing an ESL program which would subscribe to events and > > >> perform the needed actions? > > >> > > >> How about the following scenario: > > >> > > >> 1. In the XML dialplan, you execute "park" application on the incoming > > >> call. > > >> > > >> 2. Your program is listening to events via ESL, and it recognizes that > > >> a channel has been parked > > >> > > >> 3. Your program starts to playback the ringback tone into that channel > > >> > > >> 4. Your program performs all the needed lookups and sets needed > > >> variables on the channel > > >> > > >> 5. Your program transfers or bridges the call where needed. > > >> > > >> This is quite easy to implement in any programming language of your > > >> choice, easy to debug, and it's easily scalable. It can be done in a > > >> multi-threading fashion, like Go or Erlang, or even Java, and perform > > >> as many parallel calls as required. > > >> > > >> quite easy, and you don't have to mess with FreeSWITCH internals :) > > >> > > >> > > >> > > >> > > >> > > >> > > >> On Thu, Mar 5, 2015 at 4:07 AM, Juan Pablo L. > > >> <jpablolorenzetti(a)hotmail.com> wrote: > > >> > Hi, i m writing a module in C that needs to check for certain > > >> > information in > > >> > a > > >> > database for the caller and the destination number, > > >> > for this the module is subscribing to the CS_INIT channel events, so > > >> > everytime a channel is created > > >> > the module callback is called and it checks the numbers, > > >> > the problem is that the callback gets called twice, > > >> > for the creation of the a-leg of the call and the creation of the > b-leg. > > >> > Is there any way to accomplish what i m trying to do ? > > >> > Am i doing it the wrong way? > > >> > I have already try getting testing for the flags in the channel but > it > > >> > did > > >> > not work, > > >> > testing of originator or originating does not yield anything .... > > >> > > > >> > i might be doing it wrong maybe ? > > >> > > > >> > Thanks! > > >> > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org > http://www.freeswitchsolutions.com Official FreeSWITCH Sites > http://www.freeswitch.org http://confluence.freeswitch.org > http://www.cluecon.com FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: > http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > -- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

sessions and CS_INIT events
by Juan Pablo L. 06 Mar '15

06 Mar '15

Hi, i m writing a module in C that needs to check for certain information in a database for the caller and the destination number, for this the module is subscribing to the CS_INIT channel events, so everytime a channel is created the module callback is called and it checks the numbers, the problem is that the callback gets called twice, for the creation of the a-leg of the call and the creation of the b-leg. Is there any way to accomplish what i m trying to do ? Am i doing it the wrong way? I have already try getting testing for the flags in the channel but it did not work, testing of originator or originating does not yield anything .... i might be doing it wrong maybe ? Thanks!

6 9

Freeswitch RTP handling payload RFC 4040 / clearmode
by Regis M 06 Mar '15

06 Mar '15

Hi, Does FS support RFC 4040 (https://tools.ietf.org/html/rfc4040) clearmode ? "This document describes how to carry 64 kbit/s channel data transparently in RTP packets, using a pseudo-codec called "Clearmode". It also serves as registration for a related MIME type called "audio/clearmode"." Not found on wiki or confluence.. Regards,

2 2