March 2013 - FreeSWITCH-users - FreeSWITCH Mailing Lists

TLS Audiocodes
by Szasz Szabolcs 26 Dec '13

26 Dec '13

Hi, Did anybody set up TLS between Freeswitch and Audiodes MP11X ? I got to work TLS between freeswitch and a softphone (phonerlite), but I have problem with Audiocodes during the TLS authentication. I've loaded the certification but it still doesn't work. Can I debug the tls in freeswitch? Please help me. Thank you in advance. Szasz Szabolcs

3 3

Gateway Registration Issues
by Aloysius Lloyd 15 Dec '13

15 Dec '13

Hi All, I am trying to connect IRISTEL ( CLEC ) in Canada and FreeSWITCH. I have the following gateway configuration <include> <gateway name="wwc_test"> <param name="auth-username" value="username"/> <param name="username" value="14161231234" /> <param name="password" value="password" /> <param name="proxy" value="sbc1.iristel.net" /> <param name="realm" value="iristel.net" /> <param name="expire-seconds" value="120"/> <param name="register" value="true"/> <param name="retry-seconds" value="30"/> <param name="ping" value="25"/> </gateway> </include> The above configuration is not working. I have the following error in cli Error. *2010-05-13 08:34:15.987465 [ERR] sofia_reg.c:1501 14161231234 Registration Failed with status Conflict [409]. failure #1* ==== Also carrier saying there is conflict in the contact field.Here is how they receive now. *Contact: <sip:gw+test_iristel@10.20.30.1:5080 ;transport=udp;gw=test_iristel>.* But the contact field should be like below Contact: <14161231234@10.20.30.1:5080; Any suggestions? Thanks in advance. Lloyd

5 6

FreeSWITCH not sending P-Asserted-Identity
by Vik Killa 29 Nov '13

29 Nov '13

I cannot get FS to send the P-Asserted-Identity header instead it always sends the P-Preferred-Identity header. According to http://wiki.freeswitch.org/wiki/Channel_Variables#sip_cid_type I must set the privacy flag in order for P-Asserted-Identity to be used, so here is my dialplan entry and the SIP INVITE that is sent: <extension name="outbound"> <condition field="destination_number" expression="^(\d{10})$"> <action application="lcr" data="$1"/> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}"/> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}"/> <action application="set" data="privacy=yes"/> <action application="privacy" data="yes"/> <action application="set" data="sip_h_Privacy=id"/> <action application="bridge" data="{sip_cid_type=pid,origination_privacy=hide_namehide_number}${lcr_auto_route}"/> </condition> </extension> ------------------------------------------------------------------------ INVITE sip:+17165555555@YYY.YYY.YYY.YYY:5060 SIP/2.0 Via: SIP/2.0/UDP 72.43.207.154;rport;branch=z9hG4bKK0pepF2H0atSp Max-Forwards: 68 From: "1000" <sip:7165551001@XX.XX.XX.XX>;tag=8U2rQ1pmXXaDQ To: <sip:+17165555555@YYY.YYY.YYY.YYY:5060> Call-ID: de66ec94-12f5-1230-cbb1-5e6ae73de10d CSeq: 27864844 INVITE Contact: <sip:mod_sofia@XX.XX.XX.XX:5060> User-Agent: FSwitch Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, UPDATE, INFO, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: timer, precondition, path, replaces Allow-Events: talk, hold, presence, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer Privacy: id Content-Type: application/sdp Content-Disposition: session Content-Length: 209 X-FS-Support: update_display,send_info P-Preferred-Identity: "1000" <sip:7165551001@XX.XX.XX.XX> v=0 o=FreeSWITCH 1336383832 1336383833 IN IP4 XX.XX.XX.XX s=FreeSWITCH c=IN IP4 XX.XX.XX.XX t=0 0 m=audio 17984 RTP/AVP 0 9 8 3 101 13 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=ptime:20

6 11

FS with SSL/TLS issues!
by mehroz 10 Nov '13

10 Nov '13

Hi, it seems like i am unable to get it done. Here is what i have done 1. created CA (Root) certificates: ./gentls_cert setup -cn pbx.freeswitch.org -alt DNS:pbx.freeswitch.org -org freeswitch.org 2. created Server Certificate: ./gentls_cert create_server -cn pbx.freeswitch.org -alt DNS:pbx.freeswitch.org -org freeswitch.org *I replaced pbx.freeswitch.org and freeswitch.org with my FS IP address in which i am listening.* 3. Enabled /internal_ssl_enable=true/ and/ ip_tls_version=tlsv1/ in vars.xml . 4. When i try to Register 3CX on TLS over port 5061, all i see is : tport_tls.c:869 tls_connect() tls_connect(0x7fbd94e7a5e0): events NEGOTIATING tport_tls.c:869 tls_connect() tls_connect(0x7fbd94e7a5e0): events NEGOTIATING tport_tls.c:958 tls_connect() tls_connect(0x7fbd94e7a5e0): TLS setup failed (error:00000001:lib(0):func(0):reason(1)) tport.c:2084 tport_close() tport_close(0x7fbd94e7a5e0): tls/59.103.76.82:56863/sips tport.c:2730 tport_wakeup_pri() tport_wakeup_pri(0x7fbd94005090): events IN tport.c:869 tport_alloc_secondary() tport_alloc_secondary(0x7fbd94005090): new secondary tport 0x7fbd94f53c70 tport_type_tls.c:603 tport_tls_accept() tport_tls_accept(0x7fbd94f53c70): new connection from tls/59.103.76.82:56864/sips. PLease help!! -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/FS-with-SSL-TLS-issues-tp7587… Sent from the freeswitch-users mailing list archive at Nabble.com.

3 2

Is it necessary to call hangup....
by Moiz Chinoy 07 Nov '13

07 Nov '13

Hello, Is it necessary to call hangup in dialplan after say playing a file through playback application. -- Regards, Moiz Chinoy.

5 4

enable-100rel question
by Mike Burlingame 24 Oct '13

24 Oct '13

I was looking to turn on 100rel however based on the below info from the wiki I am not sure I want to run the risk of it crashing FS is this information still accurate? >From http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files enable-100rel This enable support for 100rel (100% reliability - PRACK message as defined in RFC3262) This fixes a problem with SIP where provisional messages like "180 Ringing" are not ACK'd and therefore could be dropped over a poor connection without retransmission. *2009-07-08:* Enabling this may cause FreeSWITCH to crash, see FSCORE-392. <param name="enable-100rel" value="true"/>

7 11

Prevent A leg from hangup after bridge with inbound ESL socket
by Alex Massover 09 Oct '13

09 Oct '13

Hi, I have a very simple dialplan that just do park for incoming calls. All rest of leg management is done via ESL inbound socket. I'm trying to do the same behavior like in this dialplan example, but from ESL inbound socket: <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/1001@$${domain}"/> <action application="bridge" data="sofia/internal/1002@$${domain}"/> The problem is with bridge API, if B leg doesn't answer (e.g. 404, or busy), A leg disconnects. But I'm trying to prevent A leg from disconnecting in order to do bridge to other place. Looks like hangup_after_bridge=false, park_after_bridge=true, transfer_after_bridge etc don't have any effect when bridge done from inbound socket. A leg disconnects always. Is there any way to keep A leg after bridge with inbound socket? I'm aware of originate, but prefer to user bridge. -- Best Regards, Alex Massover

4 6

execute_on_fax_success/failure
by Darcy Primrose 07 Oct '13

07 Oct '13

I am using excute_on_fax_success to call a script when a fax is received, the script converts the fax to pdf and emails it, Is there a way to pass the number of pages received, ie, a variable created by spandsp. Everything works, but I do not seem to be able to pass the variables. <condition field="destination_number" expression="^1(\d{10})$|(\d{10})$"> <action application="set" data="faxtempdirectory=/faxfiles/${caller_id_number}"/> <action application="system" data="mkdir ${faxtempdirectory}"/> <action application="set" data="faxDirection=outbound"/> <action application="set" data="emailAddress=$1$2@${fax2net_server}"/> <action application="set" data="faxFile=$1$2-${caller_id_number}-${strftime(%Y-%m-%d-%H-%M-%S)-Success}"/> <action application="set" data="execute_on_fax_success=system /./var/mail/sentfaxes/fax2mail.sh ${faxFile} $1$2@${fax2net_server} ${fax_security_code} ${fromRc} fax2net_orig=${fax_email}= ${fax_transfer_rate}"/> <action application="answer"/> <action application="playback" data="silence_stream://2000"/> <action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/> <action application="rxfax" data="${faxFile}.tif"/> <action application="hangup"/> </condition> Thanks Darcy Primrose

4 7

Error Creating SIP UA for profile: X
by Henrik Aagaard Sørensen 04 Oct '13

04 Oct '13

I've had a server running only FreeSWITCH for about 6 months now. I have had it turned off for some while. Now, when trying to start FreeSWTICH, I get the errors: Error Creating SIP UA for profile: X where X differs between internal, external and others. When starting my CentOS 6 server I run: service iptables stop service ip6tables stop just to make sure that they aren't blocking anything. I have nothing else running on CentOS. I've tried to log everything from console, warning etc. but there's nothing indicating what the problem is. Can someone help me out?

7 12

Cordless phones
by Jonas Gauffin 19 Sep '13

19 Sep '13

Hi, I'm looking for IP-dects where a base station can handle 5 phones (which all should be able to talk at the same time). All suggestions are welcome. Regards, Jonas

10 13