October 2013 - FreeSWITCH-users - FreeSWITCH Mailing Lists

FreeSwitchConfig GUI Demo Server
by Roger Castaldo 23 Oct '13

23 Oct '13

Hi everyone, I have finally had the time and ability to get up a bit of a demo server for the FreeSwitchConfig gui that I have been working on. https://wiki.freeswitch.org/wiki/Freeswitch_Gui#FreeSWITCHConfig It is on a single CPU, low memory, free VPS, so its not going to respond as fast as it could on real hardware. As well as the server is kind of locked down for connecting to the freeswitch instance because its purpose is to demo the site, and hopefully get some feedback on the interface itself, as well as maybe get some interest in people using it, or helping develop it. site: http://freeswitchconfig.dalnet.ca:8080 user name: admin password: admin As per the wiki entry, every night it rebuilds to the current trunk as well as wipes out all the database data.

1 0

Re: [Freeswitch-users] Limit help
by Andre Demattia 23 Oct '13

23 Oct '13

Can I use limit_execute for a outbound gateway in place of the loop back option? -----Original Message----- From: "Matt Williams" <matt(a)williamsmjw.com> Sent: ‎10/‎22/‎2013 12:01 PM To: "FreeSWITCH Users Help" <freeswitch-users(a)lists.freeswitch.org> Subject: Re: [Freeswitch-users] Limit help You need to set your CPS and port limits separately. You can set limits per gateway the same way you would limit any application. It is not bound to any specific application. The values you use are completely arbitrary. That said here is an example from the Wiki http://wiki.freeswitch.org/wiki/Limit#Using_limit_with_per-gateway_or_per-u… On Tue, Oct 22, 2013 at 10:40 AM, Andre Demattia <andretodd(a)verizon.net> wrote: Hi, how do I set the CPS and Port limits on a bridge Can I set both on one application or do I need to set 2 limits? 5 ports <action application="limit" data="hash outbound customerxxx 5 !NORMAL_TEMPORARY_FAILURE" /> 5 cps <action application="limit" data="hash outbound customerxxx 5/1 !NORMAL_TEMPORARY_FAILURE" /> Can I do this for both 5 ports and 5 cps? <action application="limit" data="hash outbound customerxxx 5 5/1 !NORMAL_TEMPORARY_FAILURE" /> Also how do I do the same on a gateway? I need to make sure I don't send too many calls to the provider. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

3 3

Phones registered to internal profile hit external profile when calling
by hcoin 23 Oct '13

23 Oct '13

This has been a really frustrating problem, I'm sure the answer is simple but I just can't see it. I had several extensions registered to the internal profile, sending calls out the external profile to a sip-pstn gateway, all seemed fine. Then created another internal profile, using a different sip port on the same lan address, because of 'no device left behind' and NAT issues. All seemed well, all the phones register normally. Looking at the databases in FS they all show the proper ports, the proper domains, etc. However, every single call gets picked up as a new call via sophia/external/... and it hits the public dialplan normally -- except that's the wrong plan, it should hit the default plan and be identified as sofia/internal/.... and so forth. 2013-10-22 00:31:11.001600 [NOTICE] switch_channel.c:1034 New Channel sofia/external/hcoin(a)pbx.foobar.com [28ed125a-3adb-11e3-9cc1-cbb8efb09b83] What could possibly be the reason phones registered on the internal profile have their new calls identified as sophia/external and don't hit the correct plan? Both the phones and the freeswitch are on the same subnet. This should be so vanilla. What am I missing?

3 9

FreeTDM tones.conf Disconnect Supervision
by Nandy Dagondon 23 Oct '13

23 Oct '13

Hello all, Our telco recently changed their call progress tones: Dialtone: 450Hz continuous Ringback tone: 450Hz/1 sec ON 4 sec OFF Busy tone: 450Hz/360ms ON 360 OFF Attn: 950Hz/continuous (0db) The way I understand it, FXO listens for the dialtone then sends DTMF tones. After this, it expects either the Ringback or Busy tone. I read Michael Collin's post that FreeTDM doesn't detect (as of now) cadence. http://permalink.gmane.org/gmane.comp.telephony.freeswitch.user/36531 Questions: 1. What state will FreeTDM go when it detects 450Hz? Ringing or Busy? I presume it would be Ringing or it would hangup. 2. Can I use tone_detect to distinguish them? Can I use a series of tone_detects? Any suggestion where to go? If not ... My last recourse will be - wait for the Attn tone. But ... will FreeTDM jump to hangup the call upon detecting this? Thanks, /Nandy

2 5

How to configure a Gateway that registers on my FS
by David Villasmil 23 Oct '13

23 Oct '13

Hello, There are many examples for gateways on which FS registers... but how about the other way around? I have a gateway that needs to register on my FS... I know I can configure it as a client, but then how do I use it as a gateway? Thanks David

2 1

Configurable Hold Music while conference in freeswitch
by Harsimran singh 23 Oct '13

23 Oct '13

Hi, I want play configurable hold sound while conference using freeswitch. I am using "moh-sound" variable in conference.conf.xml as follows. <param name="moh-sound" value="/srv/sounds/${uuid}/knowlus_hold_music.mp3"/> The uuid is the variable "variable_uuid" in the events comes from freeswitch,but the freeswitch is unable to expand this variable and error comes as follows : [ERR] mod_shout.c:683 Error opening /srv/sounds/${uuid}/knowlus_hold_music.mp3 [ERR] mod_shout.c:862 Error from mpg123: File access error. (code 22) Freeswitch is not able to expand the variable as variable exists and the file which i want to play also exists. Can anybody help me out in this ? With Regards Harsimran Singh +91-9711271158

2 3

Re: [Freeswitch-users] GIT Down?
by Jeff Leung 23 Oct '13

23 Oct '13

Try github if all else fails. There's a mirror there under the official freeswitch account. -------- Original message -------- From: David Villasmil <david.villasmil.work(a)gmail.com> Date: 10-23-2013 6:18 AM (GMT-08:00) To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> Subject: Re: [Freeswitch-users] GIT Down? Hello, No ping response: /home/david# ping git.freeswitch.org PING vc-01.ptk.freeswitch.org (198.22.64.222) 56(84) bytes of data. Must be a problem in my network... I can't even get out to freeswitch: /home/david# traceroute git.freeswitch.org -n traceroute to git.freeswitch.org (198.22.64.222), 30 hops max, 60 byte packets 1 1.2.3.4 1.445 ms 1.436 ms 1.449 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * *^C /home/david# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 1.2.3.1 0.0.0.0 UG 0 0 0 eth0 localnet * 255.255.255.0 U 0 0 0 eth0 /home/david# On Wed, Oct 23, 2013 at 2:07 PM, Michael Jerris <mike(a)jerris.com> wrote: Are you able to ping git.freeswitch.org? All services appear to be up and running for me. If you are unable to ping.. check out a traceroute and see where its failing. On Oct 23, 2013, at 6:28 AM, David Villasmil <david.villasmil.work(a)gmail.com> wrote: I'm in Spain, not working from here... I had to download the bz2 file... David On Wed, Oct 23, 2013 at 11:40 AM, Steven Ayre <steveayre(a)gmail.com> wrote: Looks ok from here (UK) On 23 October 2013 10:05, David Villasmil <david.villasmil.work(a)gmail.com> wrote: Hello guys, I'm getting this since last night: root@llwi079:/usr/local/src# git clone git://git.freeswitch.org/freeswitch.git Cloning into 'freeswitch'... fatal: unable to connect to git.freeswitch.org: git.freeswitch.org[0: 198.22.64.222]: errno=Connection timed out root@llwi079:/usr/local/src# git clone git://git.freeswitch.org/freeswitch.git Cloning into 'freeswitch'... ^@fatal: unable to connect to git.freeswitch.org: git.freeswitch.org[0: 198.22.64.222]: errno=Connection timed out Are we down? Thanks! _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

GIT Down?
by David Villasmil 23 Oct '13

23 Oct '13

Hello guys, I'm getting this since last night: root@llwi079:/usr/local/src# git clone git:// git.freeswitch.org/freeswitch.git Cloning into 'freeswitch'... fatal: unable to connect to git.freeswitch.org: git.freeswitch.org[0: 198.22.64.222]: errno=Connection timed out root@llwi079:/usr/local/src# git clone git:// git.freeswitch.org/freeswitch.git Cloning into 'freeswitch'... ^@fatal: unable to connect to git.freeswitch.org: git.freeswitch.org[0: 198.22.64.222]: errno=Connection timed out Are we down? Thanks! David

4 5

Problem with password resend on the wiki (for french profile only?)
by Regis M 23 Oct '13

23 Oct '13

Hi, Can someone fix the wiki retreive password system *? I forgot my password and the system bugs when I tried to get it back.. The error is : No cache directory configured Backtrace: #0 /var/www/extensions/LocalisationUpdate/LocalisationUpdate.class.php(553): LocalisationUpdate::filename('fr') #1 /var/www/extensions/LocalisationUpdate/LocalisationUpdate.class.php(36): LocalisationUpdate::readFile('fr') #2 [internal function]: LocalisationUpdate::onRecache(Object(LocalisationCache), 'fr', Array) #3 /var/www/includes/Hooks.php(255): call_user_func_array('LocalisationUpd...', Array) #4 /var/www/includes/GlobalFunctions.php(3883): Hooks::run('LocalisationCac...', Array) #5 /var/www/includes/cache/LocalisationCache.php(796): wfRunHooks('LocalisationCac...', Array) #6 /var/www/includes/cache/LocalisationCache.php(426): LocalisationCache->recache('fr') #7 /var/www/includes/cache/LocalisationCache.php(310): LocalisationCache->initLanguage('fr') #8 /var/www/includes/cache/LocalisationCache.php(245): LocalisationCache->loadItem('fr', 'fallback') #9 /var/www/languages/Language.php(3978): LocalisationCache->getItem('fr', 'fallback') #10 /var/www/languages/Language.php(230): Language::getFallbacksFor('fr') #11 /var/www/languages/Language.php(189): Language::newFromCode('fr') #12 /var/www/includes/Message.php(381): Language::factory('fr') #13 /var/www/includes/specials/SpecialPasswordReset.php(243): Message->inLanguage('fr') #14 [internal function]: SpecialPasswordReset->onSubmit(Array, Object(HTMLForm)) #15 /var/www/includes/HTMLForm.php(412): call_user_func(Array, Array, Object(HTMLForm)) #16 /var/www/includes/HTMLForm.php(356): HTMLForm->trySubmit() #17 /var/www/includes/HTMLForm.php(371): HTMLForm->tryAuthorizedSubmit() #18 /var/www/includes/SpecialPage.php(996): HTMLForm->show() #19 /var/www/includes/SpecialPage.php(613): FormSpecialPage->execute(NULL) #20 /var/www/includes/SpecialPageFactory.php(487): SpecialPage->run(NULL) #21 /var/www/includes/Wiki.php(291): SpecialPageFactory::executePath(Object(Title), Object(RequestContext)) #22 /var/www/includes/Wiki.php(565): MediaWiki->performRequest() #23 /var/www/includes/Wiki.php(458): MediaWiki->main() #24 /var/www/index.php(59): MediaWiki->run() #25 {main} Maybe because I'm set to french...:) ? ar/www/extensions/LocalisationUpdate/LocalisationUpdate.class.php(553): LocalisationUpdate::*filename('fr') * *Thank you. * * * * *

1 0

Video switching
by mehroz 23 Oct '13

23 Oct '13

Hi guys, I have Linphone SIP client and my UI allows me to switch call from audio to video and video to audio. After call establishment, when i switch to video, it do so ! and when i switch back to audio , it works. But after that when i switch to video , it doesn't! Any guess ? what could be wrong here? Thanks -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Video-switching-tp7593439.html Sent from the freeswitch-users mailing list archive at Nabble.com.

3 5