January 2013 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Softphone with BLF keys
by Yehavi Bourvine 17 Jan '13

17 Jan '13

Hello, I am looking for a softphone (free or commercial) which supports true BLF. I mean: there are a few defined BLFs, which can be used to pickup the call when ringing. So far I could find nothing that really do the job. I think Bria does it, but once I did the mistake of importing Outlook contacts, the real ones I need are burried quite deeply in the list. Thanks, __Yehavi:

1 0

Escape characters in origination_caller_id_name
by Hynek Cihlar 17 Jan '13

17 Jan '13

Is there an escape character for the origination_caller_id_name variable so the full character set could be sent in the SIP packet? Hynek

1 0

Early media handling on outbound call
by Hynek Cihlar 17 Jan '13

17 Jan '13

Scenario: A call is originated to a mobile network. Mobile phone starts ringing and is hung up. The mobile phone leg is pre-answered and early media is returned saying that the caller is not answering. The message is playbed back twice, than silence for cca two seconds and then ringing tone with the actual phone starting to ring as well. The phone is hung up, early media played back, etc... The freeswitch console command used to originate the call is as follows: originate sofia/internal/1%terminal_domain &bridge({origination_caller_id_number=<some orig number>}sofia/gateway/axfone/<the destination mobile number>) My question is. Is this expected behavior? Should not the destination server end the call after early media is played back? Or is it expected from me to detect a silence and end the call? If so, what would be the best approach to solve it, wait_for_silence? Thanks for comments! Hynek

3 4

Re: [Freeswitch-users] Unloop extension
by Ержан Туле пов 17 Jan '13

17 Jan '13

Ain't what was set with <x-PRE-PROCESS cmd="set" ... gets set *only* when used in $${...} notation? ----- Original Message ----- From: Michael Collins [mailto:msc@freeswitch.org] To: FreeSWITCH Users Help [mailto:freeswitch-users@lists.freeswitch.org] Sent: Wed, 16 Jan 2013 06:54:12 +0600 Subject: Re: [Freeswitch-users] Unloop extension > Yes, it's okay. The pre-process does a set and ${unroll_loops} gets set as > needed. Then this dp entry does the work: > <extension name="unloop"> > <condition field="${unroll_loops}" expression="^true$"/> > <condition field="${sip_looped_call}" expression="^true$"> > <action application="deflect" data="${destination_number}"/> > </condition> > </extension> > > More info on sip_looped_call var: > http://wiki.freeswitch.org/wiki/Variable_sip_looped_call > > -MC > > On Mon, Jan 14, 2013 at 9:33 PM, Ержан Тулепов > <e.tylepov(a)btcom.kz> wrote: > > > What unloop extension is used for? BTW: vars.xml pre-(process)-sets > > unroll_loops, whereas DPs (public and default) are using channel variable > > syntax? Is this ok? > > > > Y. > > > > _________________________________________________________________________ > > Professional FreeSWITCH Consulting Services: > > consulting(a)freeswitch.org > > http://www.freeswitchsolutions.com > > > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > > http://www.cudatel.com > > > > Official FreeSWITCH Sites > > http://www.freeswitch.org > > http://wiki.freeswitch.org > > http://www.cluecon.com > > > > FreeSWITCH-users mailing list > > FreeSWITCH-users(a)lists.freeswitch.org > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > > > > > -- > Michael S Collins > Twitter: @mercutioviz > http://www.FreeSWITCH.org > http://www.ClueCon.com > http://www.OSTAG.org >

2 1

limit memory usage of freeswitch
by rentmycoder rentmycoder 17 Jan '13

17 Jan '13

Hi All, According to my experineces and some info found on FS lists it is the normal behaviour that freeswitch eats up all of the available memory... It's not a memory leak, but the standard behaviour of FS by design... Correct me if I'm wrong... Is there any way to limit FS memory usage??? I need another services to run on the FS box... Thanks, John

3 2

Freeswitch TLS and Yealink t26p
by Antonio 16 Jan '13

16 Jan '13

Hi, I'm trying to register a yealink with TLS, using my one certificates. I follow the wiki and In fs i have both agent.pem and cafile.pem . I install in the phone the root certificate. But when i try to register, i have (tport log): tport.c:3186 tport_recv_iovec() tport_recv_iovec(0x808fb0) msg 0x7fe9d0aa8180 from (udp/192.168.10.1:5060) has 340 bytes, veclen = 1 tport.c:3004 tport_deliver() tport_deliver(0x808fb0): msg 0x7fe9d0aa8180 (340 bytes) from udp/192.168.10.23:5060/sip next=(nil) tport.c:4202 tport_release() tport_release(0x808fb0): 0x7fe9d01142f0 by 0x7fe9d025d920 with 0x7fe9d0aa8180 tport.c:2730 tport_wakeup_pri() tport_wakeup_pri(0x7fe9c802aad0): events IN tport.c:869 tport_alloc_secondary() tport_alloc_secondary(0x7fe9c802aad0): new secondary tport 0x7fe9c03e8450 tport_type_tls.c:603 tport_tls_accept() tport_tls_accept(0x7fe9c03e8450): new connection from tls/192.168.10.36:48754/sips tport_tls.c:869 tls_connect() tls_connect(0x7fe9c03e8450): events NEGOTIATING tport_tls.c:869 tls_connect() tls_connect(0x7fe9c03e8450): events NEGOTIATING tport_tls.c:526 tls_post_connection_check() tls_post_connection_check(0x7fe9c03e8450): Peer did not provide X.509 Certificate. I could make it work and have a register in the tls profile when i check on the phone the option in Security->Trusted Certificates: "Only Accept Trusted Certificates: DISABLED". Could it be some bug in the yealink, or I’m missing something in the conf... Another question, is there any problem if i choose to use this configuration... since is the phone that ignores the certificate and the validation is done by the server and not by the client. Can you help me? Thanks, António

6 7

Status of mod_lua and dbh.release()
by Gavin Henry 16 Jan '13

16 Jan '13

Hi all, Does this release the db handle like it says? dbh:release() (optional) releases the handle back to the pool so it can be re-used by another thread. This is also automatically done when the dbh goes out of scope and is garbage collected (for example when your script returns). We're seeing quite a free PostgreSQL 9.1 processes left. -- http://www.suretecsystems.com/services/openldap/ http://www.surevoip.co.uk

2 1

FreeSWITCH Community Conference Call Today
by Michael Collins 16 Jan '13

16 Jan '13

Hello all! Today's conference call agenda is here: http://wiki.freeswitch.org/wiki/FS_weekly_2013_01_16 We have updates on FreeSWITCH 1.2.6, the new FreeSWITCH book, and ClueCon 2012 videos. We are also going to discuss some techniques for how to validate bugs and update Jira tickets with the information. Also, if anyone is familiar with git bisect we would like to invite you to spend a few minutes giving us some pointers as that is a very useful tool for locating the commit that "broke something." Talk to you shortly! -- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org

1 0

compile error
by peter ness 16 Jan '13

16 Jan '13

Can anybody advise why I am getting this error in compiling. This is a fresh download fron git and default modules.conf and ./configure Systen is amd x86_64-pc-linux-gnu make[2]: Leaving directory `/root/Desktop/freeswitch/libs/curl' make[1]: Leaving directory `/root/Desktop/freeswitch/libs/curl' which: no git in (/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/kde4/libexec:/usr/lib64/qt/bin) cat /root/Desktop/freeswitch/src/include/switch_cpp.h | perl /root/Desktop/freeswitch/build/strip.pl > /root/Desktop/freeswitch/src/include/switch_swigable_cpp.h make "OUR_MODULES=$(if test -z "" ; then tmp_mods="$(grep -v "#" /root/Desktop/freeswitch/modules.conf | sed -e "s|^.*/||" | sort | uniq )"; else tmp_mods="" ; fi ; mods="$(for i in $tmp_mods ; do echo $i-all ; done )"; echo $mods )" "OUR_CLEAN_MODULES=$(if test -z "" ; then tmp_mods="$(grep -v "#" /root/Desktop/freeswitch/modules.conf | sed -e "s|^.*/||" | sort | uniq )"; else tmp_mods="" ; fi ; mods="$(for i in $tmp_mods ; do echo $i-clean ; done )"; echo $mods )" "OUR_INSTALL_MODULES=$(if test -z "" ; then tmp_mods="$(grep -v "#" /root/Desktop/freeswitch/modules.conf | sed -e "s|^.*/||" | sort | uniq )"; else tmp_mods="" ; fi ; mods="$(for i in $tmp_mods ; do echo $i-install ; done)"; echo $mods )" "OUR_UNINSTALL_MODULES=$(if test -z "" ; then tmp_mods="$(grep -v "#" /root/Desktop/freeswitch/modules.conf | sed -e "s|^.*/||" | sort | uniq )"; else tmp_mods="" ; fi ; mods="$(for i in $tmp_mods ; do echo $i-uninstall ; done)"; echo $mods )" "OUR_DISABLED_MODULES=$(tmp_mods="$(grep "#" /root/Desktop/freeswitch/modules.conf | grep -v "##" | sed -e "s|^.*/||" | sort | uniq )"; mods="$(for i in $tmp_mods ; do echo $i-all ; done )"; echo $mods )" "OUR_DISABLED_CLEAN_MODULES=$(tmp_mods="$(grep "#" /root/Desktop/freeswitch/modules.conf | grep -v "##" | sed -e "s|^.*/||" | sort | uniq )"; mods="$(for i in $tmp_mods ; do echo $i-clean ; done )"; echo $mods )" "OUR_DISABLED_INSTALL_MODULES=$(tmp_mods="$(grep "#" /root/Desktop/freeswitch/modules.conf | grep -v "##" | sed -e "s|^.*/||" | sort | uniq )"; mods="$(for i in $tmp_mods ; do echo $i-install ; done)"; echo $mods )" "OUR_DISABLED_UNINSTALL_MODULES=$(tmp_mods="$(grep "#" /root/Desktop/freeswitch/modules.conf | grep -v "##" | sed -e "s|^.*/||" | sort | uniq )"; mods="$(for i in $tmp_mods ; do echo $i-uninstall ; done)"; echo $mods )" `test -n "" || echo -s` all-recursive quiet_libtool: compile: gcc -DHAVE_CONFIG_H -I. -I./src/include -I./libs/xmlrpc-c -I/root/Desktop/freeswitch/libs/curl/include -I/root/Desktop/freeswitch/src/include -I/root/Desktop/freeswitch/src/include -I/root/Desktop/freeswitch/libs/libteletone/src -I/root/Desktop/freeswitch/libs/stfu -fPIC -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -Ilibs/sofia-sip/libsofia-sip-ua/sdp/sofia-sip -Ilibs/sofia-sip/libsofia-sip-ua/su -g -O2 -pthread -D_REENTRANT -D_GNU_SOURCE -I/root/Desktop/freeswitch/libs/apr/include -I/root/Desktop/freeswitch/libs/apr-util/include -I/root/Desktop/freeswitch/libs/apr-util/xml/expat/lib -I/root/Desktop/freeswitch/libs/libtpl-1.5/src -I/root/Desktop/freeswitch/libs/stfu -I/root/Desktop/freeswitch/libs/sqlite -I/root/Desktop/freeswitch/libs/pcre -I/root/Desktop/freeswitch/libs/speex/include -Ilibs/speex/include -I/root/Desktop/freeswitch/libs/srtp/include -I/root/Desktop/freeswitch/libs/srtp/crypto/include -Ilibs/srtp/crypto/include -I/root/Desktop/freeswitch/libs/spandsp/src -I/root/Desktop/freeswitch/libs/tiff-4.0.2/libtiff -DENABLE_SRTP -DSWITCH_HAVE_ODBC -I/usr/local/include -I/root/Desktop/freeswitch/libs/libedit/src -DSWITCH_HAVE_LIBEDIT -I/root/Desktop/freeswitch/libs/curl/include -I/root/Desktop/freeswitch/src/include -I/root/Desktop/freeswitch/src/include -I/root/Desktop/freeswitch/libs/libteletone/src -I/root/Desktop/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -Wall -std=c99 -pedantic -Wdeclaration-after-statement -g -O2 -MT libfreeswitch_la-switch_apr.lo -MD -MP -MF .deps/libfreeswitch_la-switch_apr.Tpo -c src/switch_apr.c -fPIC -DPIC -o .libs/libfreeswitch_la-switch_apr.o In file included from /root/Desktop/freeswitch/libs/spandsp/src/spandsp.h:66:0, from ./src/include/private/switch_core_pvt.h:35, from src/switch_apr.c:37: /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h: In function 'fir16_create': /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h:94:5: error: implicit declaration of function 'rpl_malloc' [-Werror=implicit-function-declaration] /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h:94:25: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h: In function 'fir32_create': /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h:213:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h: In function 'fir_float_create': /root/Desktop/freeswitch/libs/spandsp/src/spandsp/fir.h:261:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] src/switch_apr.c: In function 'switch_dir_open': src/switch_apr.c:558:22: error: initialization makes pointer from integer without a cast [-Werror] cc1: all warnings being treated as errors make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make: *** [all] Error 2

2 1

Redundant Dial Plan in JS
by Sean Devoy 16 Jan '13

16 Jan '13

Hi, This question stems from the fact that I cannot find a VOIP Service Provider (VSP) that can connect outgoing calls truly reliably. I have customers who expect calls to go through just like good old ma-bell did -100% of the time barring natural disasters. You have to admit those guys set the bar pretty high for us. I was using Voip Innovations with decent success, but my users complain every 2 weeks or so and I send the trace to VI. The standard response is always "We have updated our route tables for that area." I switched to Vitelity where I was assured they have redundant paths and this could never happen! I have only confirmed it happening twice in the last 3 weeks! Of course one of those was during the demo of the new service I had just installed for a new customer. So, I give up. My new approach is "VSPs cannot deliver consistent highly reliable service - work around it!" I know I want a dial plan that will check the bridge status and redial using a different gateway (VSP) if it failed (not busy or no answer - failure). I am pretty sure the best/easy approach is a JavaScript "dialer" script to handle this. I have looked in the wiki for such a sample. If it exists I have missed it. So rather than "re-inventing the wheel" I am reaching out to you all. Does anyone have a dialing script that checks for failure and redials on failure or just continues to voicemail on no answer? I will happily test and tweak it and add it to the wiki if you have something to get me started!!! If not I shall take the plunge and get started! My ideal solution will dial, play a message and redial on failure, maybe 2 or three times or play a failure message and email me on excess errors. I am leaning toward "Call congestion, rerouting. Please stand by" while the new bridge is being attempted. Thanks, Sean

4 5