September 2012 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Is it necessary to call hangup....
by Moiz Chinoy 07 Nov '13

07 Nov '13

Hello, Is it necessary to call hangup in dialplan after say playing a file through playback application. -- Regards, Moiz Chinoy.

5 4

enable-100rel question
by Mike Burlingame 24 Oct '13

24 Oct '13

I was looking to turn on 100rel however based on the below info from the wiki I am not sure I want to run the risk of it crashing FS is this information still accurate? >From http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files enable-100rel This enable support for 100rel (100% reliability - PRACK message as defined in RFC3262) This fixes a problem with SIP where provisional messages like "180 Ringing" are not ACK'd and therefore could be dropped over a poor connection without retransmission. *2009-07-08:* Enabling this may cause FreeSWITCH to crash, see FSCORE-392. <param name="enable-100rel" value="true"/>

7 11

Prevent A leg from hangup after bridge with inbound ESL socket
by Alex Massover 09 Oct '13

09 Oct '13

Hi, I have a very simple dialplan that just do park for incoming calls. All rest of leg management is done via ESL inbound socket. I'm trying to do the same behavior like in this dialplan example, but from ESL inbound socket: <action application="set" data="hangup_after_bridge=false"/> <action application="bridge" data="sofia/internal/1001@$${domain}"/> <action application="bridge" data="sofia/internal/1002@$${domain}"/> The problem is with bridge API, if B leg doesn't answer (e.g. 404, or busy), A leg disconnects. But I'm trying to prevent A leg from disconnecting in order to do bridge to other place. Looks like hangup_after_bridge=false, park_after_bridge=true, transfer_after_bridge etc don't have any effect when bridge done from inbound socket. A leg disconnects always. Is there any way to keep A leg after bridge with inbound socket? I'm aware of originate, but prefer to user bridge. -- Best Regards, Alex Massover

4 6

execute_on_fax_success/failure
by Darcy Primrose 07 Oct '13

07 Oct '13

I am using excute_on_fax_success to call a script when a fax is received, the script converts the fax to pdf and emails it, Is there a way to pass the number of pages received, ie, a variable created by spandsp. Everything works, but I do not seem to be able to pass the variables. <condition field="destination_number" expression="^1(\d{10})$|(\d{10})$"> <action application="set" data="faxtempdirectory=/faxfiles/${caller_id_number}"/> <action application="system" data="mkdir ${faxtempdirectory}"/> <action application="set" data="faxDirection=outbound"/> <action application="set" data="emailAddress=$1$2@${fax2net_server}"/> <action application="set" data="faxFile=$1$2-${caller_id_number}-${strftime(%Y-%m-%d-%H-%M-%S)-Success}"/> <action application="set" data="execute_on_fax_success=system /./var/mail/sentfaxes/fax2mail.sh ${faxFile} $1$2@${fax2net_server} ${fax_security_code} ${fromRc} fax2net_orig=${fax_email}= ${fax_transfer_rate}"/> <action application="answer"/> <action application="playback" data="silence_stream://2000"/> <action application="set" data="fax_enable_t38_request=true"/> <action application="set" data="fax_enable_t38=true"/> <action application="rxfax" data="${faxFile}.tif"/> <action application="hangup"/> </condition> Thanks Darcy Primrose

4 7

Error Creating SIP UA for profile: X
by Henrik Aagaard Sørensen 04 Oct '13

04 Oct '13

I've had a server running only FreeSWITCH for about 6 months now. I have had it turned off for some while. Now, when trying to start FreeSWTICH, I get the errors: Error Creating SIP UA for profile: X where X differs between internal, external and others. When starting my CentOS 6 server I run: service iptables stop service ip6tables stop just to make sure that they aren't blocking anything. I have nothing else running on CentOS. I've tried to log everything from console, warning etc. but there's nothing indicating what the problem is. Can someone help me out?

7 12

Cordless phones
by Jonas Gauffin 19 Sep '13

19 Sep '13

Hi, I'm looking for IP-dects where a base station can handle 5 phones (which all should be able to talk at the same time). All suggestions are welcome. Regards, Jonas

10 13

Have someone zrtp with correct sas ?
by J.B. BERLIN 29 Aug '13

29 Aug '13

Dear users, I try run FS last git build from today 19. June 2011 with ZRTP. Zfone show me green but the sas are everytime different! Tested with 2x Notebooks on Fedora 14 Twinkle(via yum) & with two desktops with Win7 x64 / Zfone 0.92.build.219 and X-Lite on both sides. FS is build with libzrtp-0.81.514 zrtp.lua is enabled ! global_setvar zrtp_secure_media=true" is set Or have someone a real good step by step guide ? Many thanks and best regards Jacek

4 4

Error message " [ERR] switch_cpp.cpp:48 Cannot queue any more events“
by tangdu 22 Aug '13

22 Aug '13

I use Mod event to fill channel cariables in my mysql table。When freeswitch runing some time，I got a lot of the following error messages: [ERR] switch_cpp.cpp:48 Cannot queue any more events。 This messages telling me that i have consumed too many events in my event consumer object. it has reached its max. Then the channel cariables can not be filled in mysql。 How can I solve this? Thanks！ -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/Error-message-ERR-switch-cpp-… Sent from the freeswitch-users mailing list archive at Nabble.com.

7 7

Faxing problems if B leg offers T.38
by Rob Morin 04 Jul '13

04 Jul '13

Im having problems faxing if the B leg offers T.38. Several scenarios, but always the same result. First, the architecture FAX à ATA (T.38 optional) à FS à Carrier à Destination (Possibly another carrier (PSTN) and the fax machine) On my ATA, T.38 is enabled (Auto Detect). If the destination supports T.38, the Carrier will offer it to Freeswitch. If the Destination doesnt support T.38, the B leg doesnt offer it and the faxes go through. Ive set Freeswitch as: <action application="set" data="fax_enable_t38=true"/> <action application="export" data="t38_passthru=true"/> When thats the case, and the B leg offers T.38, Freeswitch passes through the offer and the ATA responds, 3 times. But the response never gets sent to the B leg, so it terminates the call after about 30 seconds. When I set Freeswitch as: <action application="set" data="fax_enable_t38=false"/> The B leg still offers T.38 if its other side is capable. Freeswitch doesnt pass the offer through and the B leg terminates the call after about 30 seconds. Im running on a recent git ( FreeSWITCH Version 1.0.head (git-86d757d 2011-05-17 22-51-47 -0500) ). Ive had no success attempting to configure FS as a gateway. Frankly, T.38 passthrough has had the most success, mostly when the other ends arent T.38 capable and it stays in G711u. Is there something else I need to do to enable T.38 in passthrough mode? Thank you, Rob Morin PS I can provide tcpdumps of this, or whatever else is necessary.

5 13

Dynamic specify the outbound GW within source code
by fieldpeak 27 Jun '13

27 Jun '13

Dear friends, i have FS for PSTN outbound call using below dial plan, <extension name="CallToPSTN" > <condition field="destination_number" expression="^(0\d+)$" > <action application="bridge" data="sofia/internal/$1(a)1.2.3.4" /> </condition> </extension> While, now i need dynamically specify the outbound GW’s IP address according to the return result of the external command before routing in the source code , e.g. if the external command return FS the IP address of OB GW 6.7.8.9, then <action application="bridge" data="sofia/internal/$1(a)6.7.8.9" /> however, i don't know which function i should call within the source code to realize it, could anybody help to advise, P.S. i know there is existing module “mod_xml_curl” can realize similar function, however, I could not use it for this case… thanks a lot! Regards, Charles

3 5