>
> Nitin,
It is quite possible that you must have added it sometime earlier and only
deleted it from the XML and not from the freeswitch memory. Freeswitch
callcenter module basically maintains an SQLite DB where it stores all
these values. You will have to remove it from the freeswitch memory.
Execute this from freeswitch CLI:
callcenter_config agent del <agent_name>
--- Jayesh
> You are right Jayesh, agent 1000 s being listed from CLI. But it is not in
> callcenter.cong.xml. Neither I have added it from CLI. Where it is coming
> from?
>
> ** **
>
> Thanks****
>
> ** **
>
> Nitin****
>
> ** **
>
> *From:* freeswitch-users-bounces(a)lists.freeswitch.org [mailto:
> freeswitch-users-bounces(a)lists.freeswitch.org] *On Behalf Of *Jayesh
> Nambiar
> *Sent:* Friday, August 31, 2012 8:07 PM
> *To:* freeswitch-users(a)lists.freeswitch.org
> *Subject:* Re: [Freeswitch-users] mod_callcenter: Call being forwarded to
> caller itself****
>
> ** **
>
> Hi Nitin,****
>
> In that case all you have to confirm is that you have not set the contact
> of any agent as 1000. Keep in mind that the agents can be pushed into
> freeswitch memory from API commands also. Basically you can use FS_CLI to
> add agents and set their contacts even without mentioning those agents in
> the XML file. So just be sure that you do not have any agent's contact set
> to 1000 and also check from FS_CLI issuing this command: "callcenter_config
> agent list" to make sure that none of the agent has contact set to 1000.**
> **
>
> ** **
>
> --- Jayesh****
>
> ** **
>
> ****
>
> Hi Jayesh,****
>
> ****
>
> Call is being redirected to call center because it is working other two
> options. Even for “sales” the call is redirected to caller(extn 1000) but
> when it is declined from there, it works as desired.****
>
> ****
>
> Thanks****
>
> ****
>
> Nitin****
>
> ****
>
> *From:* freeswitch-users-bounces(a)lists.freeswitch.org [mailto:
> freeswitch-users-bounces(a)lists.freeswitch.org] *On Behalf Of *Jayesh
> Nambiar
> *Sent:* Friday, August 31, 2012 6:55 PM
> *To:* freeswitch-users(a)lists.freeswitch.org
> *Subject:* Re: [Freeswitch-users] mod_callcenter: Call being forwarded to
> caller itself****
>
> ****
>
> Nitin, ****
>
> If this is your exact configuration, it is simply not possible that the
> call gets routed back to same extension unless there is something
> configured in the dialplan.****
>
> Look at the console in loglevel 7 mode and check if the call goes into
> callcenter module or no? If no, check the flow of your dialplan and figure
> out what is taking the call back to the calling extension.****
>
> ****
>
> --- Jayesh ****
>
> ****
>
> *From:* freeswitch-users-bounces(a)lists.freeswitch.org [mailto:
> freeswitch-users-bounces(a)lists.freeswitch.org] *On Behalf Of *Nitin Tomer*
> ***
>
> *Sent:* Wednesday, August 29, 2012 3:39 PM
> *To:* 'FreeSWITCH Users Help'
> *Subject:* [Freeswitch-users] mod_callcenter: Call being forwarded to
> caller itself****
>
> ****
>
> Hi,****
>
> ****
>
> I’ve configure mod_callcenter on Ubuntu 12.0.4. I’ve 5 extensions working
> on 6 soft phones – 1000 to 1005. 1000 is used to call the IVR number, rest
> 5 are agents.****
>
> ****
>
> The dial plan looks like –****
>
> ****
>
> <extension name="ivr_nitin">****
>
> <condition field="destination_number" expression="^5002$">****
>
> <action application="answer"/>****
>
> <action application="sleep" data="500"/>****
>
> <action application="ivr" data="nitin_ivr"/>****
>
> </condition>****
>
> </extension>****
>
> <!-- For Call Center -->****
>
> <!-- Newgen Support -->****
>
> <extension>****
>
> <condition field="destination_number" expression="^(450)$">****
>
> <action application="set" data="caller_id_name=Newgen
> Support" />****
>
> <action application="set" data="call_timeout=60" />****
>
> <action application="set" data="originate_timeout=60" />****
>
> <action application="callcenter" data="support@default"/>***
> *
>
> </condition>****
>
> </extension>****
>
> ****
>
> <!-- Newgen Sales -->****
>
> <extension>****
>
> <condition field="destination_number" expression="^(451)$">****
>
> <action application="set" data="caller_id_name=Newgen
> Sales" />****
>
> <action application="set" data="call_timeout=60" />****
>
> <action application="set" data="originate_timeout=60" />***
> *
>
> <action application="callcenter" data="sales@default"/>****
>
> </condition>****
>
> </extension>****
>
> ****
>
> <!-- Newgen Human Resources -->****
>
> <extension>****
>
> <condition field="destination_number" expression="^(452)$">****
>
> <action application="set" data="caller_id_name=Newgen Human
> Resources" />****
>
> <action application="set" data="call_timeout=60" />
> ****
>
> <action application="set" data="originate_timeout=60" />***
> *
>
> <action application="callcenter" data="hr@default"/>****
>
> </condition>****
>
> </extension>****
>
> ****
>
> IVR.xml –****
>
> ****
>
> <include>****
>
> <menu name="nitin_ivr"****
>
> greet-long="say:Welcome to Newgen Software Technologies
> Limited. Press 1 for support, 2 for sales or 3 for human resource"****
>
> greet-short="say:Welcome to Newgen. Press 1 for support, 2
> for sales or 3 for human resources"****
>
> invalid-sound="ivr/ivr-that_was_an_invalid_entry.wav"****
>
> exit-sound="voicemail/vm-goodbye.wav"****
>
> confirm-macro=""****
>
> confirm-key=""****
>
> tts-engine="flite"****
>
> tts-voice="slt"****
>
> confirm-attempts="3"****
>
> timeout="3000"****
>
> inter-digit-timeout="2000"****
>
> max-failures="3"****
>
> max-timeouts="3"****
>
> digit-len="4">****
>
> ****
>
> <entry action="menu-exec-app" digits="1" param="transfer
> 450 XML default"/> <!-- Support -->****
>
> <entry action="menu-exec-app" digits="2" param="transfer
> 451 XML default"/> <!-- Sales -->****
>
> <entry action="menu-exec-app" digits="3" param="transfer
> 452 XML default"/> <!-- Human Resources -->****
>
> ****
>
> </menu>****
>
> </include>****
>
> ****
>
> And callcenter.conf.xml –****
>
> ****
>
> <configuration name="callcenter.conf" description="CallCenter">****
>
> <settings>****
>
> <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->****
>
> <!--<param name="dbname" value="/dev/shm/callcenter.db"/>-->****
>
> </settings>****
>
> ****
>
> <queues>****
>
> <queue name="sales@default">****
>
> <param name="strategy"
> value="agent-with-least-talk-time"/>****
>
> <param name="moh-sound"
> value="$${hold_music}"/>****
>
> <!--<param name="record-template"
> value="$${base_dir}/recordings/sales/${strftime(%Y-%m-%d-%H-%M-%S)}.${destination_number}.${caller_id_number}.${uuid}.wav"/>-->
> ****
>
> <param name="time-base-score"
> value="queue"/>****
>
> <param name="tier-rules-apply"
> value="false"/>****
>
> <param name="tier-rule-wait-second"
> value="300"/>****
>
> <param
> name="tier-rule-wait-multiply-level" value="true"/>****
>
> <param name="tier-rule-no-agent-no-wait"
> value="false"/>****
>
> <param name="discard-abandoned-after"
> value="14400"/>****
>
> <param name="max-wait-time" value="0"/>***
> *
>
> <param name="max-wait-time-with-no-agent"
> value="120"/>****
>
> </queue>****
>
> <queue name="support@default">****
>
> <param name="strategy"
> value="agent-with-least-talk-time"/>****
>
> <param name="moh-sound"
> value="$${hold_music}"/>****
>
> <!--<param name="record-template"
> value="$${base_dir}/recordings/support/${strftime(%Y-%m-%d-%H-%M-%S)}.${destination_number}.${caller_id_number}.${uuid}.wav"/>-->
> ****
>
> <param name="time-base-score"
> value="queue"/>****
>
> <param name="tier-rules-apply"
> value="false"/>****
>
> <param name="tier-rule-wait-second"
> value="300"/>****
>
> <param
> name="tier-rule-wait-multiply-level" value="true"/>****
>
> <param name="tier-rule-no-agent-no-wait"
> value="false"/>****
>
> <param name="discard-abandoned-after"
> value="60"/>****
>
> <param name="abandoned-resume-allowed"
> value="false"/>****
>
> <param name="max-wait-time" value="0"/>***
> *
>
> <param name="max-wait-time-with-no-agent"
> value="120"/>****
>
> </queue>****
>
> <queue name="hr@default">****
>
> <param name="strategy"
> value="agent-with-least-talk-time"/>****
>
> <param name="moh-sound"
> value="$${hold_music}"/>****
>
> <!--<param name="record-template"
> value="$${base_dir}/recordings/support/${strftime(%Y-%m-%d-%H-%M-%S)}.${destination_number}.${caller_id_number}.${uuid}.wav"/>-->
> ****
>
> <param name="time-base-score"
> value="queue"/>****
>
> <param name="tier-rules-apply"
> value="false"/>****
>
> <param name="tier-rule-wait-second"
> value="300"/>****
>
> <param
> name="tier-rule-wait-multiply-level" value="true"/>****
>
> <param name="tier-rule-no-agent-no-wait"
> value="false"/>****
>
> <param name="discard-abandoned-after"
> value="60"/>****
>
> <param name="abandoned-resume-allowed"
> value="false"/>****
>
> <param name="max-wait-time" value="0"/>***
> *
>
> <param name="max-wait-time-with-no-agent"
> value="120"/>****
>
> </queue>****
>
> </queues>****
>
> ****
>
> <!-- WARNING: Configuration of XML Agents will be updated into the DB upon
> restart. -->****
>
> <!-- WARNING: Configuration of XML Tiers will reset the level and position
> if those were supplied. -->****
>
> <!-- WARNING: Agents and Tiers XML config shouldn't be used in a multi FS
> shared DB setup (Not currently supported anyway) -->****
>
> <agents>****
>
> <agent name="1001" type="callback"
> contact="[call_timeout=10]user/1001" status="Available" max-no-answer="3"
> wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />****
>
> <agent name="1002" type="callback"
> contact="[call_timeout=10]user/1002" status="Available" max-no-answer="3"
> wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />****
>
> <agent name="1003" type="callback"
> contact="[call_timeout=10]user/1003" status="Available" max-no-answer="3"
> wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />****
>
> <agent name="1004" type="callback"
> contact="[call_timeout=10]user/1004" status="Available" max-no-answer="3"
> wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />****
>
> <agent name="1005" type="callback"
> contact="[call_timeout=10]user/1005" status="Available" max-no-answer="3"
> wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />****
>
> </agents>****
>
> <tiers>****
>
> <!-- If no level or position is provided, they will default to 1. You
> should do this to keep db value on restart. -->****
>
> <!-- agent 1001 is in all three queues -->****
>
> <tier agent="1001" queue="sales@default" level="1"
> position="1"/>****
>
> <tier agent="1001" queue="support@default" level="1"
> position="1"/>****
>
> <tier agent="1001" queue="hr@default" level="1"
> position="1"/>****
>
> ****
>
> <tier agent="1002" queue="sales@default" level="1"
> position="1"/>****
>
> ****
>
> <tier agent="1003" queue="support@default" level="1"
> position="1"/>****
>
> ****
>
> <tier agent="1004" queue="sales@default" level="1"
> position="1"/>****
>
> <tier agent="1004" queue="support@default" level="1"
> position="1"/>****
>
> ****
>
> <tier agent="1005" queue="hr@default" level="1"
> position="1"/>****
>
> </tiers>****
>
> ****
>
> </configuration>****
>
> ****
>
> When I call from extension 1000 and press 2 for sales, call is routed back
> to extension 1000, which is not even in agents’ list. Why is it happening?
> ****
>
> ****
>
> Regards****
>
> ****
>
> Nitin****
>
> ****
>
> ** **
> Disclaimer :- This e-mail and any attachment may contain confidential,
> proprietary or legally privileged information. If you are not the original
> intended recipient and have erroneously received this message, you are
> prohibited from using, copying, altering or disclosing the content of this
> message. Please delete it immediately and notify the sender. Newgen
> Software Technologies Ltd (NSTL) accepts no responsibilities for loss or
> damage arising from the use of the information transmitted by this email
> including damages from virus and further acknowledges that no binding
> nature of the message shall be implied or assumed unless the sender does so
> expressly with due authority of NSTL. ****
>
> ** **
>
> ** **
>
> Disclaimer :- This e-mail and any attachment may contain confidential,
> proprietary or legally privileged information. If you are not the original
> intended recipient and have erroneously received this message, you are
> prohibited from using, copying, altering or disclosing the content of this
> message. Please delete it immediately and notify the sender. Newgen
> Software Technologies Ltd (NSTL) accepts no responsibilities for loss or
> damage arising from the use of the information transmitted by this email
> including damages from virus and further acknowledges that no binding
> nature of the message shall be implied or assumed unless the sender does so
> expressly with due authority of NSTL.
>