May 2012 - FreeSWITCH-users - FreeSWITCH Mailing Lists

What is the digit for in ./bootstrap.sh -j4 ?
by Tom C 19 May '12

19 May '12

On the Installation Guide page of the FreeSwitch wiki, it says the following: ------------------------- You can use multiple cores for your bootstrap/config/build, by specifying it at the start, e.g.: (note this may make build errors harder to spot) ./bootstrap.sh -j4 -------------------------- I looked through the bootstrap.sh code, and it appears that the trailing digit in the above example is ignored? Or am I missing something? I was thinking/hoping it was a way to specify the maximum # of background processes that get created. At this point I assume it is just an error in the wiki.

4 4

correct way to send out dtmf type in gateway
by dingdong 18 May '12

18 May '12

Hello all, what is the correct way to send out a dtmf type other than rcf2833? via a gateway? i have this telepacific number that goes to IVR when called,it doesn't accept any options pressed when i call from a sip ipphone(flowroute) it will start working though when start_dtmf_generate is started. dp <extension name="telepacific" > <condition field="destination_number" expression="^(18774878349)$" > <action application="start_dtmf_generate" /> <action application="bridge" data="sofia/gateway/Flowroute/$1" /> </condition> </extension> how do i exactly set a dtmf type? ding

2 1

FS Core Dump using GSM Hardware
by Wesley Akio 18 May '12

18 May '12

Hi all, I'm experiencing several core dumps a day in one of our boxes. The problem was happening with FS trunk from Apr 30. Updated yesterday and the problem continues. I suspect it has something to do with the GSM hardware(Khomp) in use but I'm not sure... If someone could take a look at the backtraces I would be very thankfull. http://pastebin.freeswitch.org/19059 FreeSWITCH Version 1.2.0 (git-d015395 2012-05-15 11-26-16 -0500) Best, Wesley Akio TuntsCorp.com

3 7

One core at 100% usage
by Stephen Wilde 18 May '12

18 May '12

I have done a git pull (now git-83e090c 2012-05-17 16-40-30 +0000) and I have a strange load distribution over cores: one core at 100%. Here the htop: 1 [|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||100.0%] 2 [||||||||||||||||| 19.1%] 3 [|| 1.3%] 4 [|| 1.3%] 5 [ 0.0%] 6 [ 0.0%] 7 [|||| 3.9%] 8 [||||||||||||| 13.2%] 9 [ 0.0%] 10 [||||||||||||||||| 18.3%] 11 [||||| 4.6%] 12 [|||||||||||||||| 17.0%] 13 [|||||||| 8.6%] 14 [|||||||||||| 12.5%] 15 [|||||||| 8.6%] 16 [||||||||||||||||||| 21.1%] After revert to an old git I have this htop: 1 [||||||| 7.2%] 2 [|||||||||||| 11.8%] 3 [||||| 5.3%] 4 [||||||| 6.6%] 5 [|||| 3.3%] 6 [||||||||| 9.0%] 7 [||||| 4.6%] 8 [|||||||||||||| 15.1%] 9 [||||||| 6.5%] 10 [||||||||| 9.3%] 11 [|||||| 6.5%] 12 [|||||||||||||| 14.9%] 13 [|||||||| 7.8%] 14 [|||||||||||||||| 17.0%] 15 [|||||||| 7.3%] 16 [||||||||||| 11.8%] anyone with same issue?

4 3

how to fix : RECOVERY_ON_TIMER_EXPIRE??
by Samira Mh 18 May '12

18 May '12

hi guys, every time i want to make call via gateway on freeswitch the following error occured: 2012-05-18 16:17:16.296384 [INFO] mod_dptools.c:2355 Originate Failed. Cause: RECOVERY_ON_TIMER_EXPIRE plz help,thanks

3 5

set dtmf type without sip profile
by Anita Hall 18 May '12

18 May '12

Hi I am taking DID from voxbone.com, they do not need authentication by login and password, so I have not created a SIP profile. By allowing their IP addresses in acl.conf.xml, I am able to receive incoming calls and media. However, dtmf is not coming. Doing tshark, no RTP event corresponding to dtmf is being received. Voxbone sends DTMF over rfc2833 I have set in conf/sip_profiles/internal.xml and done reload mod_sofia <param name="dtmf-type" value="rfc2833"/> But I am not sure if this is the correct place. Is there any other pace where dtmf type can be specified in the absence of a sip profile ? regards, Anita

2 1

start perl-script after receiving fax
by B.Tietz＠pinguin.ag 18 May '12

18 May '12

Hi, I would like to receive (T38/T30) faxes with rxfax. I think this won't be a problem to do so in dialplan. But, after (succesfull) receiving I would like to call a perl-script which needs some variables, at least the fax-file name, and some other infos. How can I call this script with variables afte receiving? regards, Benjamin

2 1

cannot set variable on att_xfer bridge
by Vik Killa 18 May '12

18 May '12

Hi, I can't seem to set variables on the att_xfer call leg. I've tried the following: <action application="att_xfer" data="{default_areacode=1918}sofia/internal/${digits}@${domain_name}"/> or <action application="export" data="default_areacode=${user_data(${caller_id_number}@${domain_name} var default_areacode)}"/> <action application="att_xfer" data="sofia/internal/${digits}@${domain_name}"/> or <action application="set" data="default_areacode=${user_data(${caller_id_number}@${domain_name} var default_areacode)}" inline="true"/> <action application="att_xfer" data="sofia/internal/${digits}@${domain_name}"/> None seem to work. Is it even possible to send variables to the att_xfer call leg? I don't see anything in the wiki about it.

1 1

Re: [Freeswitch-users] Loud whilte noise during sleep
by Phil Quesinberry 18 May '12

18 May '12

Actually it's one of the latest 1.2.0 revisions - b653c21. I didn't realize that with the quick look I had at the code. Curious. that makes me wonder if the Aastra phones are generating the noise when they don't see any media. A user complained about hearing the noise when first logging into voicemail, before she is asked for her PIN. I hadn't noticed it before because I normally do that on speaker but on the handset, it is quite noticeable. Is there a way to use send_silence_when_idle without having it kill ringback when set to a non-zero value? ---------- Anthony Minessale Thu May 17 20:21:35 MSD 2012 Which revision of the code are you looking at? The sleep sends dummy frames unless you set that send_silence_when_idle var, if its not set its probably not sending anything. You can see in the code that unless that var is set it wont be generating anything.

2 2

mod_say_es fail when tray pronounce voicemails messages dates
by RrodolfoS . 18 May '12

18 May '12

mod_say_es fail when tray pronounce voicemails messages dates, in english work well but in espanish fail. In spanish the ivr and voicemail intro work fine, except the voicemails messages. The logs is the same of this http://www.freeswitch.es/node/14755 Configs details: Version FreeSWITCH Version 1.1.beta1 (git-4283408 2012-04-29 11-33-24 -0400) /usr/src/freeswitch/modules.conf say/mod_say_es # make mod_say_es-install /usr/local/freeswitch/conf/freeswitch.xml <section name="languages" description="Language Management"> <X-PRE-PROCESS cmd="include" data="lang/de/*.xml"/> <X-PRE-PROCESS cmd="include" data="lang/en/*.xml"/>  <X-PRE-PROCESS cmd="include" data="lang/fr/*.xml"/> <X-PRE-PROCESS cmd="include" data="lang/ru/*.xml"/> <X-PRE-PROCESS cmd="include" data="lang/he/*.xml"/> </section> /usr/local/freeswitch/conf/vars.xml <X-PRE-PROCESS cmd="set" data="default_language=es"/> /usr/local/freeswitch/conf/lang/es/es.xml <include> <language name="es" say-module="es" sound-prefix="$${sounds_dir}/es/mx/maria" tts-engine="cepstral" tts-voice="maria"> <phrases> <macros> <X-PRE-PROCESS cmd="include" data="demo/*.xml"/>   <X-PRE-PROCESS cmd="include" data="vm/sounds.xml"/>  <X-PRE-PROCESS cmd="include" data="dir/sounds.xml"/>  <X-PRE-PROCESS cmd="include" data="ivr/*.xml"/>  </macros> <X-PRE-PROCESS cmd="include" data="vm/voicemail_ivr.xml"/> </phrases> </language> </include> /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml  <load module="mod_say_es"/> <load module="mod_say_en"/>   The spanish sounds are in /usr/local/freeswitch/sounds/es/mx/maria/ with 8000, 16000, 32000, 44100 and 48000 sample rate mono. /usr/local/freeswitch/conf/lang/es are a modified copy of /usr/local/freeswitch/conf/lang/en

2 3