December 2012 - FreeSWITCH-users - FreeSWITCH Mailing Lists

attended transfer to rxfax
by Babak Yakhchali 19 Dec '12

19 Dec '12

Hi How can I implement this: user calls to a number which starts sending fax after user presses 1 (channel A) after user hears fax signaling starts to attended transfer to a local extension which executes rxfax (Channel B) after user hears local extension rxfax signaling presses transfer to complete the transfer but no fax is received!! I trace logs and see that channel B ends after user presses transfer. it seems I need to create a C channel which is running txfax but I donno how to do it

3 5

Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so
by JRichey 19 Dec '12

19 Dec '12

"yum remove zlib" will do a pretty good job of wiping out your system due to dependencies. -----Original Message----- From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org]On Behalf Of Sean Devoy Sent: Tuesday, December 18, 2012 4:33 PM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so What a total disaster! I added the EPEL per JRichie - thank you. rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm <http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm> Then I decided to remove all the pre-reqs and reinstall. I ran: yum remove autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig unixODBC-devel openssl-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2 which The results are of course totally disastrous. I now have no yum or rpm. I looked up how to install them. Yum says use rpm and rpm says use yum! I can't even do a "cat /etc/redhat-release" or "ls" => /bin/ls command not found. Short of waiting for the ISP to get up tomorrow and completely reprovisioning my Centos5, does anyone have any suggestions. Is there a command to reinstall centos 5 w/o yum or rpm? From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Mario G Sent: Tuesday, December 18, 2012 6:52 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so FYI, I was the one that tested FS on CentOS (among about 5 other distros) since I was redoing the install wiki, and I remember EPEL was required on CentOS 5.5 at the time. Mario G On Dec 18, 2012, at 3:41 PM, Ken Rice wrote: You probably don't need epel unless you are installing on centos5... EPEL just adds another yum REPO for getting more upto date packages... If you look at the EPEL site, it tells you how to install it... Its usually just add this RPM via yum install http://some.website/some/path/some.rpm <http://some.website/some/path/some.rpm> On 12/18/12 4:57 PM, "Sean Devoy" < sdevoy(a)bizfocused.com <x-msg://19/sdevoy@bizfocused.com> > wrote: Thanks. That is EXACTLY what I am trying to follow. I am thrown by "There were no issues during installation and testing other than EPEL requirements." And "Installation of Git required adding the EPEL repository to obtain Git. For EPEL information visit the EPEL < http://fedoraproject.org/wiki/EPEL <http://fedoraproject.org/wiki/EPEL> > site, The EPEL repository is added with 1 click." I cannot understand how to install EPEL or how to click with my SSH window. Anyone that can help me with that? I did not install the "optional packages" so I will now. And try again. From: freeswitch-users-bounces(a)lists.freeswitch.org <x-msg://19/freeswitch-users-bounces@lists.freeswitch.org> [ mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Ken Rice Sent: Tuesday, December 18, 2012 5:37 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so If you installed on a centos base install then follow the directions on the wiki at http://wiki.freeswitch.org/wiki/Installation_Guide#CentOS <http://wiki.freeswitch.org/wiki/Installation_Guide#CentOS> That usually avoids all these errors... I usually do something like yum install autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig unixODBC-devel openssl-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2 which You may of course need to add a few extra RPMs if you are compiling things that you have to uncomment in modules.conf On 12/18/12 4:23 PM, "Sean Devoy" < sdevoy(a)bizfocused.com <x-msg://19/sdevoy@bizfocused.com> > wrote: Thank you! That resulted in a message saying I needed to install bison, so I ran yum install bison. That resulted in shit though: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -Wall -pipe -g -O2 -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -fPIC -DPIC -o mpglib_interface.o gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -Wall -pipe -g -O2 -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -fPIC -DPIC -o mpglib_interface.o libtool: link: `VbrTag.lo' is not a valid libtool object make[9]: *** [libmp3lame.la] Error 1 make[8]: *** [all-recursive] Error 1 Making all in frontend libtool: link: `VbrTag.lo' is not a valid libtool object make[9]: *** [libmp3lame.la] Error 1 make[8]: *** [all-recursive] Error 1 Making all in frontend make[8]: *** No rule to make target `../libmp3lame/libmp3lame.la', needed by `lame'. Stop. Making all in Dll Making all in debian Making all in doc Making all in html Making all in man Making all in include Making all in misc Making all in dshow Making all in ACM Making all in ADbg Making all in ddk make[8]: *** No rule to make target `../libmp3lame/libmp3lame.la', needed by `lame'. Stop. Making all in Dll Making all in tinyxml Making all in debian Making all in doc Making all in mac Making all in macosx Making all in html Making all in man Making all in English.lproj Making all in include Making all in LAME.xcodeproj Making all in misc Making all in dshow Making all in vc_solution Making all in ACM make[7]: *** [all-recursive] Error 1 make[6]: *** [all] Error 2 make[5]: *** [/usr/local/src/freeswitch/libs/lame-3.98.4/libmp3lame/libmp3lame.la] Error 2 make[4]: *** [install] Error 1 make[3]: *** [mod_shout-install] Error 1 Making all in ADbg Making all in ddk Making all in tinyxml Making all in mac Making all in macosx Making all in English.lproj Making all in LAME.xcodeproj Making all in vc_solution make[7]: *** [all-recursive] Error 1 make[6]: *** [all] Error 2 make[5]: *** [/usr/local/src/freeswitch/libs/lame-3.98.4/libmp3lame/libmp3lame.la] Error 2 make[4]: *** [all] Error 1 make[3]: *** [mod_shout-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 make[2]: *** [install-recursive] Error 1 make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 [1]+ Exit 2 make Can't we get the INSTALL page of the wiki right? From: freeswitch-users-bounces(a)lists.freeswitch.org <x-msg://19/freeswitch-users-bounces@lists.freeswitch.org> [ mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Abaci Sent: Tuesday, December 18, 2012 5:01 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so yum install gdbm-devel db4-devel On 12/18/2012 4:52 PM, Sean Devoy wrote: I just started a clean install of the stable tree on a brand new install of Centos 5.3. Here is EXACTLY what I have done so far: Logged in to root Cd /usr/local/src yum install gcc yum -y install zlib-devel openssl-devel cpio expat-devel gettext-devel cd /usr/local/src wget http://git-core.googlecode.com/files/git-1.7.9.tar.gz <http://git-core.googlecode.com/files/git-1.7.9.tar.gz> tar xvzf git-1.7.9.tar.gz cd git-1.7.9 ./configure make make install yum install autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig cd /usr/local/src git clone -b v1.2.stable git://git.freeswitch.org/freeswitch.git <git://git.freeswitch.org/freeswitch.git> ./bootstrap.sh ./configure tftp modules.conf from existing centos/fs server (did this kill it)? If so how can I get it back? make & make install after about 20 minutes the output is: gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -fPIC -DPIC -o .libs/mod_perl.o gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -o mod_perl.o >/dev/null 2>&1 Creating mod_perl.so... /usr/bin/ld: cannot find -lgdbm collect2: ld returned 1 exit status gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -shared -o .libs/mod_perl.so -shared -Wl,-x .libs/mod_perl.o -Wl,-E -Wl,-rpath -Wl,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE freeswitch_perl.o mod_perl_wrap.o perlxsi.o /usr/local/src/freeswitch/.libs/libfreeswitch.so -L/usr/local/src/freeswitch/libs/apr-util/xml/expat/lib /usr/local/src/freeswitch/libs/apr-util/xml/expat/lib/.libs/libexpat.a /usr/local/src/freeswitch/libs/apr/.libs/libapr-1.a -luuid -L/usr/local/src/freeswitch/libs/srtp -L/usr/kerberos/lib -lrt -lssl -lcrypto -lz -lncurses -ljpeg -lodbc -L/usr/local/lib /usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -Wl,--rpath -Wl,/usr/local/freeswitch/lib -Wl,--rpath -Wl,/usr/local/freeswitch/mod make[5]: *** [mod_perl.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_perl-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 The modules.conf I upload is: #applications/mod_abstraction #applications/mod_avmd applications/mod_blacklist applications/mod_callcenter applications/mod_cidlookup applications/mod_cluechoo applications/mod_commands applications/mod_conference applications/mod_curl applications/mod_db applications/mod_directory #applications/mod_distributor applications/mod_dptools #applications/mod_easyroute applications/mod_enum applications/mod_esf #applications/mod_esl applications/mod_expr applications/mod_fifo #applications/mod_fsk applications/mod_fsv applications/mod_hash applications/mod_httapi #applications/mod_http_cache #applications/mod_ladspa applications/mod_lcr #applications/mod_memcache #applications/mod_mongo #applications/mod_nibblebill #applications/mod_osp #applications/mod_redis #applications/mod_rss applications/mod_sms #applications/mod_snapshot #applications/mod_snipe_hunt #applications/mod_snom #applications/mod_soundtouch applications/mod_spandsp #applications/mod_spy #applications/mod_stress applications/mod_valet_parking #applications/mod_vmd applications/mod_voicemail applications/mod_voicemail_ivr #applications/mod_random #asr_tts/mod_cepstral asr_tts/mod_flite asr_tts/mod_pocketsphinx asr_tts/mod_tts_commandline #asr_tts/mod_unimrcp codecs/mod_amr #codecs/mod_amrwb codecs/mod_bv #codecs/mod_celt #codecs/mod_codec2 #codecs/mod_com_g729 #codecs/mod_dahdi_codec codecs/mod_g723_1 codecs/mod_g729 codecs/mod_h26x #codecs/mod_ilbc #codecs/mod_isac #codecs/mod_opus #codecs/mod_sangoma_codec #codecs/mod_silk #codecs/mod_siren codecs/mod_speex dialplans/mod_dialplan_asterisk #dialplans/mod_dialplan_directory dialplans/mod_dialplan_xml #directories/mod_ldap #endpoints/mod_alsa endpoints/mod_dingaling #endpoints/mod_h323 #endpoints/mod_khomp endpoints/mod_loopback #endpoints/mod_opal #endpoints/mod_portaudio endpoints/mod_rtmp #endpoints/mod_skinny #endpoints/mod_skypopen endpoints/mod_sofia event_handlers/mod_cdr_csv #event_handlers/mod_cdr_mongodb #event_handlers/mod_cdr_pg_csv event_handlers/mod_cdr_sqlite #event_handlers/mod_erlang_event #event_handlers/mod_event_multicast event_handlers/mod_event_socket #event_handlers/mod_event_zmq #event_handlers/mod_radius_cdr event_handlers/mod_snmp formats/mod_local_stream formats/mod_native_file #formats/mod_portaudio_stream #formats/mod_shell_stream formats/mod_shout formats/mod_sndfile formats/mod_tone_stream #formats/mod_vlc #languages/mod_java languages/mod_lua #languages/mod_managed languages/mod_perl languages/mod_python languages/mod_spidermonkey #languages/mod_yaml loggers/mod_console loggers/mod_logfile loggers/mod_syslog #say/mod_say_de say/mod_say_en #say/mod_say_es #say/mod_say_fr #say/mod_say_he #say/mod_say_hu #say/mod_say_it #say/mod_say_nl #say/mod_say_pt #say/mod_say_ru #say/mod_say_th #say/mod_say_zh #timers/mod_posix_timer #timers/mod_timerfd xml_int/mod_xml_cdr xml_int/mod_xml_curl #xml_int/mod_xml_ldap xml_int/mod_xml_rpc xml_int/mod_xml_scgi #../../libs/freetdm/mod_freetdm #../../libs/openzap/mod_openzap ## Experimental Modules (don't cry if they're broken) #../../contrib/mod/xml_int/mod_xml_odbc _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <x-msg://19/consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com <http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://wiki.freeswitch.org <http://wiki.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <x-msg://19/FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> _____ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <x-msg://19/consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com <http://www.cudatel.com/> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://wiki.freeswitch.org <http://wiki.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <x-msg://19/FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/> -- Ken http://www.FreeSWITCH.org <http://www.FreeSWITCH.org/> http://www.ClueCon.com <http://www.ClueCon.com/> http://www.OSTAG.org <http://www.OSTAG.org/> irc.freenode.net <http://irc.freenode.net> #freeswitch _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com <http://www.cudatel.com> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org> http://wiki.freeswitch.org <http://wiki.freeswitch.org> http://www.cluecon.com <http://www.cluecon.com> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org>

5 4

Conference Calls 404
by Nick Vines 19 Dec '12

19 Dec '12

The two most recent calls, Nov 28 and Dec 5, torrent links are broken. Does anyone have the torrent file or the recordings? Thanks, Nick

2 1

show calls/channels b-leg false information
by Ahmed Sboor 19 Dec '12

19 Dec '12

Hi All, i am trying to see information like show calls or show channels . only confusion is wrong/missing information in *b_name and **b_ip_addr .* these both are taken from a leg while here i was expecting to see call is connected to which gateway. * * * * i am having like : *<b_name>sofia/external/919123123334</b_name>* Means there is no "gateway name mentioned in b_name. and in b_ip_addr its like : * <b_ip_addr>10.10.10.1</b_ip_addr>* while this is ip call is coming from and b leg i was expecting as ip of gateway call is going to. Please let me know if i am missing something. usring FreeSWITCH Version 1.2.5.3+git~20121206T171012Z~d74bef3f2f (git d74bef3 2012-12-06 17:10:12Z) Thanking you Ahmed

3 7

New install 1.2.Stable blows up compiling mod_perl.so
by Sean Devoy 19 Dec '12

19 Dec '12

I just started a clean install of the stable tree on a brand new install of Centos 5.3. Here is EXACTLY what I have done so far: Logged in to root Cd /usr/local/src yum install gcc yum -y install zlib-devel openssl-devel cpio expat-devel gettext-devel cd /usr/local/src wget http://git-core.googlecode.com/files/git-1.7.9.tar.gz tar xvzf git-1.7.9.tar.gz cd git-1.7.9 ./configure make make install yum install autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig cd /usr/local/src git clone -b v1.2.stable git://git.freeswitch.org/freeswitch.git ./bootstrap.sh ./configure tftp modules.conf from existing centos/fs server (did this kill it)? If so how can I get it back? make & make install after about 20 minutes the output is: gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -fPIC -DPIC -o .libs/mod_perl.o gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -o mod_perl.o >/dev/null 2>&1 Creating mod_perl.so... /usr/bin/ld: cannot find -lgdbm collect2: ld returned 1 exit status gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -shared -o .libs/mod_perl.so -shared -Wl,-x .libs/mod_perl.o -Wl,-E -Wl,-rpath -Wl,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE freeswitch_perl.o mod_perl_wrap.o perlxsi.o /usr/local/src/freeswitch/.libs/libfreeswitch.so -L/usr/local/src/freeswitch/libs/apr-util/xml/expat/lib /usr/local/src/freeswitch/libs/apr-util/xml/expat/lib/.libs/libexpat.a /usr/local/src/freeswitch/libs/apr/.libs/libapr-1.a -luuid -L/usr/local/src/freeswitch/libs/srtp -L/usr/kerberos/lib -lrt -lssl -lcrypto -lz -lncurses -ljpeg -lodbc -L/usr/local/lib /usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -Wl,--rpath -Wl,/usr/local/freeswitch/lib -Wl,--rpath -Wl,/usr/local/freeswitch/mod make[5]: *** [mod_perl.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_perl-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 The modules.conf I upload is: #applications/mod_abstraction #applications/mod_avmd applications/mod_blacklist applications/mod_callcenter applications/mod_cidlookup applications/mod_cluechoo applications/mod_commands applications/mod_conference applications/mod_curl applications/mod_db applications/mod_directory #applications/mod_distributor applications/mod_dptools #applications/mod_easyroute applications/mod_enum applications/mod_esf #applications/mod_esl applications/mod_expr applications/mod_fifo #applications/mod_fsk applications/mod_fsv applications/mod_hash applications/mod_httapi #applications/mod_http_cache #applications/mod_ladspa applications/mod_lcr #applications/mod_memcache #applications/mod_mongo #applications/mod_nibblebill #applications/mod_osp #applications/mod_redis #applications/mod_rss applications/mod_sms #applications/mod_snapshot #applications/mod_snipe_hunt #applications/mod_snom #applications/mod_soundtouch applications/mod_spandsp #applications/mod_spy #applications/mod_stress applications/mod_valet_parking #applications/mod_vmd applications/mod_voicemail applications/mod_voicemail_ivr #applications/mod_random #asr_tts/mod_cepstral asr_tts/mod_flite asr_tts/mod_pocketsphinx asr_tts/mod_tts_commandline #asr_tts/mod_unimrcp codecs/mod_amr #codecs/mod_amrwb codecs/mod_bv #codecs/mod_celt #codecs/mod_codec2 #codecs/mod_com_g729 #codecs/mod_dahdi_codec codecs/mod_g723_1 codecs/mod_g729 codecs/mod_h26x #codecs/mod_ilbc #codecs/mod_isac #codecs/mod_opus #codecs/mod_sangoma_codec #codecs/mod_silk #codecs/mod_siren codecs/mod_speex dialplans/mod_dialplan_asterisk #dialplans/mod_dialplan_directory dialplans/mod_dialplan_xml #directories/mod_ldap #endpoints/mod_alsa endpoints/mod_dingaling #endpoints/mod_h323 #endpoints/mod_khomp endpoints/mod_loopback #endpoints/mod_opal #endpoints/mod_portaudio endpoints/mod_rtmp #endpoints/mod_skinny #endpoints/mod_skypopen endpoints/mod_sofia event_handlers/mod_cdr_csv #event_handlers/mod_cdr_mongodb #event_handlers/mod_cdr_pg_csv event_handlers/mod_cdr_sqlite #event_handlers/mod_erlang_event #event_handlers/mod_event_multicast event_handlers/mod_event_socket #event_handlers/mod_event_zmq #event_handlers/mod_radius_cdr event_handlers/mod_snmp formats/mod_local_stream formats/mod_native_file #formats/mod_portaudio_stream #formats/mod_shell_stream formats/mod_shout formats/mod_sndfile formats/mod_tone_stream #formats/mod_vlc #languages/mod_java languages/mod_lua #languages/mod_managed languages/mod_perl languages/mod_python languages/mod_spidermonkey #languages/mod_yaml loggers/mod_console loggers/mod_logfile loggers/mod_syslog #say/mod_say_de say/mod_say_en #say/mod_say_es #say/mod_say_fr #say/mod_say_he #say/mod_say_hu #say/mod_say_it #say/mod_say_nl #say/mod_say_pt #say/mod_say_ru #say/mod_say_th #say/mod_say_zh #timers/mod_posix_timer #timers/mod_timerfd xml_int/mod_xml_cdr xml_int/mod_xml_curl #xml_int/mod_xml_ldap xml_int/mod_xml_rpc xml_int/mod_xml_scgi #../../libs/freetdm/mod_freetdm #../../libs/openzap/mod_openzap ## Experimental Modules (don't cry if they're broken) #../../contrib/mod/xml_int/mod_xml_odbc

4 9

Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so
by JRichey 18 Dec '12

18 Dec '12

The commands below will add the EPEL repo, just choose the right one for your architecture. If you have git already you shouldn't need EPEL, but you may want it for ngrep, fail2ban, etc. rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm <http://dl.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm> rpm -Uvh http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm <http://dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm> -----Original Message----- From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org]On Behalf Of Sean Devoy Sent: Tuesday, December 18, 2012 3:03 PM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so Sorry, I should have mentioned I deleted the /usr/local/src/freswitch treeand started over with: cd /usr/local/src git clone -b v1.2.stable git://git.freeswitch.org/freeswitch.git From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Sean Devoy Sent: Tuesday, December 18, 2012 5:58 PM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so Thanks. That is EXACTLY what I am trying to follow. I am thrown by "There were no issues during installation and testing other than EPEL requirements." And "Installation of Git required adding the EPEL repository to obtain Git. For EPEL information visit the EPEL <http://fedoraproject.org/wiki/EPEL> site, The EPEL repository is added with 1 click." I cannot understand how to install EPEL or how to click with my SSH window. Anyone that can help me with that? I did not install the "optional packages" so I will now. And try again. From: freeswitch-users-bounces(a)lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> [ mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Ken Rice Sent: Tuesday, December 18, 2012 5:37 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so If you installed on a centos base install then follow the directions on the wiki at http://wiki.freeswitch.org/wiki/Installation_Guide#CentOS <http://wiki.freeswitch.org/wiki/Installation_Guide#CentOS> That usually avoids all these errors... I usually do something like yum install autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig unixODBC-devel openssl-devel libogg-devel libvorbis-devel curl-devel libtiff-devel libjpeg-devel python-devel expat-devel zlib zlib-devel bzip2 which You may of course need to add a few extra RPMs if you are compiling things that you have to uncomment in modules.conf On 12/18/12 4:23 PM, "Sean Devoy" <sdevoy(a)bizfocused.com> wrote: Thank you! That resulted in a message saying I needed to install bison, so I ran yum install bison. That resulted in shit though: gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -Wall -pipe -g -O2 -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -fPIC -DPIC -o mpglib_interface.o gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I. -I../mpglib -I.. -Wall -pipe -g -O2 -MT mpglib_interface.lo -MD -MP -MF .deps/mpglib_interface.Tpo -c mpglib_interface.c -fPIC -DPIC -o mpglib_interface.o libtool: link: `VbrTag.lo' is not a valid libtool object make[9]: *** [libmp3lame.la] Error 1 make[8]: *** [all-recursive] Error 1 Making all in frontend libtool: link: `VbrTag.lo' is not a valid libtool object make[9]: *** [libmp3lame.la] Error 1 make[8]: *** [all-recursive] Error 1 Making all in frontend make[8]: *** No rule to make target `../libmp3lame/libmp3lame.la', needed by `lame'. Stop. Making all in Dll Making all in debian Making all in doc Making all in html Making all in man Making all in include Making all in misc Making all in dshow Making all in ACM Making all in ADbg Making all in ddk make[8]: *** No rule to make target `../libmp3lame/libmp3lame.la', needed by `lame'. Stop. Making all in Dll Making all in tinyxml Making all in debian Making all in doc Making all in mac Making all in macosx Making all in html Making all in man Making all in English.lproj Making all in include Making all in LAME.xcodeproj Making all in misc Making all in dshow Making all in vc_solution Making all in ACM make[7]: *** [all-recursive] Error 1 make[6]: *** [all] Error 2 make[5]: *** [/usr/local/src/freeswitch/libs/lame-3.98.4/libmp3lame/libmp3lame.la] Error 2 make[4]: *** [install] Error 1 make[3]: *** [mod_shout-install] Error 1 Making all in ADbg Making all in ddk Making all in tinyxml Making all in mac Making all in macosx Making all in English.lproj Making all in LAME.xcodeproj Making all in vc_solution make[7]: *** [all-recursive] Error 1 make[6]: *** [all] Error 2 make[5]: *** [/usr/local/src/freeswitch/libs/lame-3.98.4/libmp3lame/libmp3lame.la] Error 2 make[4]: *** [all] Error 1 make[3]: *** [mod_shout-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 make[2]: *** [install-recursive] Error 1 make[1]: *** [install-recursive] Error 1 make: *** [install] Error 2 [1]+ Exit 2 make Can't we get the INSTALL page of the wiki right? From: freeswitch-users-bounces(a)lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org <mailto:freeswitch-users-bounces@lists.freeswitch.org> ] On Behalf Of Abaci Sent: Tuesday, December 18, 2012 5:01 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] New install 1.2.Stable blows up compiling mod_perl.so yum install gdbm-devel db4-devel On 12/18/2012 4:52 PM, Sean Devoy wrote: I just started a clean install of the stable tree on a brand new install of Centos 5.3. Here is EXACTLY what I have done so far: Logged in to root Cd /usr/local/src yum install gcc yum -y install zlib-devel openssl-devel cpio expat-devel gettext-devel cd /usr/local/src wget http://git-core.googlecode.com/files/git-1.7.9.tar.gz <http://git-core.googlecode.com/files/git-1.7.9.tar.gz> tar xvzf git-1.7.9.tar.gz cd git-1.7.9 ./configure make make install yum install autoconf automake gcc-c++ git-core libjpeg-devel libtool make ncurses-devel pkgconfig cd /usr/local/src git clone -b v1.2.stable git://git.freeswitch.org/freeswitch.git ./bootstrap.sh ./configure tftp modules.conf from existing centos/fs server (did this kill it)? If so how can I get it back? make & make install after about 20 minutes the output is: gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -fPIC -DPIC -o .libs/mod_perl.o gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -DHAVE_CONFIG_H -c /usr/local/src/freeswitch/src/mod/languages/mod_perl/mod_perl.c -o mod_perl.o >/dev/null 2>&1 Creating mod_perl.so... /usr/bin/ld: cannot find -lgdbm collect2: ld returned 1 exit status gcc -w -DMULTIPLICITY -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -I/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -DEMBED_PERL -I/usr/local/src/freeswitch/libs/curl/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/src/include -I/usr/local/src/freeswitch/libs/libteletone/src -I/usr/local/src/freeswitch/libs/stfu -fPIC -Werror -fvisibility=hidden -DSWITCH_API_VISIBILITY=1 -DHAVE_VISIBILITY=1 -g -ggdb -DHAVE_OPENSSL -g -O2 -Wall -std=c99 -pedantic -Wdeclaration-after-statement -D_GNU_SOURCE -shared -o .libs/mod_perl.so -shared -Wl,-x .libs/mod_perl.o -Wl,-E -Wl,-rpath -Wl,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE freeswitch_perl.o mod_perl_wrap.o perlxsi.o /usr/local/src/freeswitch/.libs/libfreeswitch.so -L/usr/local/src/freeswitch/libs/apr-util/xml/expat/lib /usr/local/src/freeswitch/libs/apr-util/xml/expat/lib/.libs/libexpat.a /usr/local/src/freeswitch/libs/apr/.libs/libapr-1.a -luuid -L/usr/local/src/freeswitch/libs/srtp -L/usr/kerberos/lib -lrt -lssl -lcrypto -lz -lncurses -ljpeg -lodbc -L/usr/local/lib /usr/lib/perl5/5.8.8/i386-linux-thread-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE -lperl -lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -Wl,--rpath -Wl,/usr/local/freeswitch/lib -Wl,--rpath -Wl,/usr/local/freeswitch/mod make[5]: *** [mod_perl.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_perl-all] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 The modules.conf I upload is: #applications/mod_abstraction #applications/mod_avmd applications/mod_blacklist applications/mod_callcenter applications/mod_cidlookup applications/mod_cluechoo applications/mod_commands applications/mod_conference applications/mod_curl applications/mod_db applications/mod_directory #applications/mod_distributor applications/mod_dptools #applications/mod_easyroute applications/mod_enum applications/mod_esf #applications/mod_esl applications/mod_expr applications/mod_fifo #applications/mod_fsk applications/mod_fsv applications/mod_hash applications/mod_httapi #applications/mod_http_cache #applications/mod_ladspa applications/mod_lcr #applications/mod_memcache #applications/mod_mongo #applications/mod_nibblebill #applications/mod_osp #applications/mod_redis #applications/mod_rss applications/mod_sms #applications/mod_snapshot #applications/mod_snipe_hunt #applications/mod_snom #applications/mod_soundtouch applications/mod_spandsp #applications/mod_spy #applications/mod_stress applications/mod_valet_parking #applications/mod_vmd applications/mod_voicemail applications/mod_voicemail_ivr #applications/mod_random #asr_tts/mod_cepstral asr_tts/mod_flite asr_tts/mod_pocketsphinx asr_tts/mod_tts_commandline #asr_tts/mod_unimrcp codecs/mod_amr #codecs/mod_amrwb codecs/mod_bv #codecs/mod_celt #codecs/mod_codec2 #codecs/mod_com_g729 #codecs/mod_dahdi_codec codecs/mod_g723_1 codecs/mod_g729 codecs/mod_h26x #codecs/mod_ilbc #codecs/mod_isac #codecs/mod_opus #codecs/mod_sangoma_codec #codecs/mod_silk #codecs/mod_siren codecs/mod_speex dialplans/mod_dialplan_asterisk #dialplans/mod_dialplan_directory dialplans/mod_dialplan_xml #directories/mod_ldap #endpoints/mod_alsa endpoints/mod_dingaling #endpoints/mod_h323 #endpoints/mod_khomp endpoints/mod_loopback #endpoints/mod_opal #endpoints/mod_portaudio endpoints/mod_rtmp #endpoints/mod_skinny #endpoints/mod_skypopen endpoints/mod_sofia event_handlers/mod_cdr_csv #event_handlers/mod_cdr_mongodb #event_handlers/mod_cdr_pg_csv event_handlers/mod_cdr_sqlite #event_handlers/mod_erlang_event #event_handlers/mod_event_multicast event_handlers/mod_event_socket #event_handlers/mod_event_zmq #event_handlers/mod_radius_cdr event_handlers/mod_snmp formats/mod_local_stream formats/mod_native_file #formats/mod_portaudio_stream #formats/mod_shell_stream formats/mod_shout formats/mod_sndfile formats/mod_tone_stream #formats/mod_vlc #languages/mod_java languages/mod_lua #languages/mod_managed languages/mod_perl languages/mod_python languages/mod_spidermonkey #languages/mod_yaml loggers/mod_console loggers/mod_logfile loggers/mod_syslog #say/mod_say_de say/mod_say_en #say/mod_say_es #say/mod_say_fr #say/mod_say_he #say/mod_say_hu #say/mod_say_it #say/mod_say_nl #say/mod_say_pt #say/mod_say_ru #say/mod_say_th #say/mod_say_zh #timers/mod_posix_timer #timers/mod_timerfd xml_int/mod_xml_cdr xml_int/mod_xml_curl #xml_int/mod_xml_ldap xml_int/mod_xml_rpc xml_int/mod_xml_scgi #../../libs/freetdm/mod_freetdm #../../libs/openzap/mod_openzap ## Experimental Modules (don't cry if they're broken) #../../contrib/mod/xml_int/mod_xml_odbc _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com <http://www.cudatel.com> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org> http://wiki.freeswitch.org <http://wiki.freeswitch.org> http://www.cluecon.com <http://www.cluecon.com> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org> _____ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting(a)freeswitch.org http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com> FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com <http://www.cudatel.com> Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org> http://wiki.freeswitch.org <http://wiki.freeswitch.org> http://www.cluecon.com <http://www.cluecon.com> FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org> -- Ken http://www.FreeSWITCH.org <http://www.FreeSWITCH.org> http://www.ClueCon.com <http://www.ClueCon.com> http://www.OSTAG.org <http://www.OSTAG.org> irc.freenode.net #freeswitch

1 0

Do you have a Wishlist of someone you would like to see Do a presentation on the weekly conf call?
by Ken Rice 18 Dec '12

18 Dec '12

Let us know who they are... Email me here or off list so we can start getting the schedule nailed down.. K -- Ken http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org irc.freenode.net #freeswitch

1 0

SIP re-INVITEs and DTMF renegotiation
by Richard Brady 18 Dec '12

18 Dec '12

Hi folks I have the joy of talking to a Cisco device which behaves in weird and wonderful ways. When transferring a caller (in this case FreeSWITCH) to MOH it negotiates RFC2833 out of the SDP. When reconnecting the caller to a more meaningful endpoint, it renegotiates the media again, but using delayed offer/answer, which means FreeSWITCH must perform the offer. Since FreeSWITCH has seen RFC2833 removed previously: [DEBUG] sofia_glue.c:5277 No 2833 in SDP. Disable 2833 dtmf and switch to INFO. It does not offer RFC2833 in the new SDP (if it did, the Cisco would now accept it and answer with it). Any suggestion for how I can force it to re-offer RFC2833? Regards, Richard

2 2

mod_fifo ringall
by Frederick Pruneau 18 Dec '12

18 Dec '12

Hello all! I have set up a queue with mod_fifo. I am trying to ring agents' phones all at once. I have looked at the wiki page http://wiki.freeswitch.org/wiki/Mod_fifo. Everything is working except that the phones are ringing one by one. I don't find the information to setup ringall strategy. I have done a Google search. It seems that it is possible but I don't find any information how to set it up. Can you help me with this? Fred

3 5

Re: [Freeswitch-users] build error with new Freeswitch 'nametab.h': No such file or directory
by Peter Olsson 18 Dec '12

18 Dec '12

I suspect you're using an old version? /Peter Från: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Alexander Haugg Skickat: den 18 december 2012 13:06 Till: freeswitch-users(a)lists.freeswitch.org Ämne: [Freeswitch-users] build error with new Freeswitch 'nametab.h': No such file or directory Hi, i hope the question is not reapplied today i checkout the newest version of freeswqitch and get following error: "E:\TFS_neu\C4B UC\Main\3rd Party\FreeSWITCH\tmp_3\freeswitch\Freeswitch.2008.sln" (rebuild target) (1) -> (_Libraries\xmlrpc-c\xmltok:Rebuild target) -> ..\..\xmlrpc-c\lib\expat\xmltok\xmltok.c(10): fatal error C1083: Cannot open include file: 'nametab.h': No such file or directory Exist a workaround or bugfix for this problem? Thanks for your help !DSPAM:50d059ae32761979713419!

1 0