January 2012 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Continue after lua execute bridge
by David Villasmil 03 Jan '12

03 Jan '12

Hello Gang, I'm executing from a lua script: session:execute("bridge","sofia/gateway/" .. gw .. "/" .. out_number .. "") But I want my script to END if the bridge is succesfull, i.e.: Ringing, Answer, Busy... I've been testing, but it doesn't seem like the script is aware of the result of the bridge until AFTER it has been release by the "bridge" application... Is there ANY way to end my script in any of the scenarious mentioned before? (Ringing, Answer, Busy) Thanks a lot oh, and MERRY CHRISTMAS or Happy Holidays, or whatever suits you! ;) David

2 1

conf count
by Rodney 03 Jan '12

03 Jan '12

I can select the conf-alone sound in caller controls and even set up a bind digit for caller count once i am already in the conference using the Conference Announce Count Inline extension. but what i cant figure out is how to speak the caller count when entering the conference room. can anyone help with this? currently with conf-alone it only speaks the file when i am the only one left or there isnt anyone else in the room when i get there. i would like it to tell me the total callers of the room i am heading into. thanks.

4 3

Posibility to build a module for chan dongle
by Josue Diaz Cruz 03 Jan '12

03 Jan '12

I was thinking if it could be possible to build a module like the asterisk chan dongle. Uses the huawey USB GMS/UTMS modem to place calls throught GSM networks I can build an asterisk server for this, but i am working continously with freeswitch and i have not too much knowledge of c/c++. I enjoy really work with freeswitch. I think that make this module could be nice to use it in a low cost sip to GSM gateway. We can use it to develop pbx systems with gsm, or trunking. Perhaps there is other module better than this made in freeswitch and i am asking an stupid thing. What i like from this chan dongle is that it is not needed to use any sound card or other device for this. Just only as a module cause the huawey have the voice mode activable. The web page for the chan is this: http://wiki.e1550.mobi/doku.php?id=installation It is open source. so we can use the sources without any issue. Sorry me if the information is not really exaustive or if i maid many mistakes not knowing completely the posibilities with other modules that can do this job. By the way, sorry me for my english. It is not really good. Josue Diaz Cruz Departamento Tecnico y Soporte <mailto:jdiaz@coinfru.com> jdiaz(a)coinfru.com C/ Balsicas 3 Alquerias | 30580 | Murcia <http://www.coinfru.com/> www.coinfru.com

7 16

vBilling Announcement - First Beta Release
by Muhammad Naseer Bhatti 03 Jan '12

03 Jan '12

Hello everyone, Though a few days late, but happy new year to everyone. Last year was tough and we worked hard to get vBilling up and running. So, here we are, announcing the first beta release. vBilling is the first Open Source billing platform for FreeSWITCH. Take a look at http://www.vbilling.org/ for more details. Some of the major features includes: Both Pre-Paid and Post-Paid model Multiple administration access levels Multiple reseller level Easy rate/price management Route management Separate user interface to view their CDR(s) and billing information Authentication by IP/ANI and SIP registration Codec management for both user and switch CDR statistics Gateway statistics Admin/Reseller/User management Switch management from 1 GUI Balance and payment information I would like to invite everyone to download and install using the installer scripts available at http://vbilling.org/get-started/ We need your contribution and help to make this a success project. Don't forget to visit our forum at http://forum.vbilling.org/ and also the Customer support http://support.vbilling.org/ if required. All the source code is also available http://github.com/digitallinx/vBilling/ So, take a look, download, install and have fun. Thanks, Muhammad Naseer (Goni)

1 0

Re: [Freeswitch-users] mod_sofia not binding to port 5060
by Mashudi 03 Jan '12

03 Jan '12

Brandon McGinty <brandon.mcginty(a)gmail.com> wrote: >Thanks for these. However, I checked all three of these resources. >For some reason, this issue is only occuring when the init.d script for >debian, is used to start freeswitch; from the command line, the issue >goes away completely. >All that is running is the -nc switch, so I'm not sure what could be >causing the issue. >Thanks again. > >Brandon McGinty-Carroll > > >On 1/2/2012 8:34 PM, Tamer Higazi wrote: >> Look at: >> >> conf/autoload_configs/switch.conf.xml >> >> read this: >> http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files >> >> >> look at "sip-port" >> >> >> I am tired, I am going to bed. >> >> >> Tamer >> >> >> Am 02.01.2012 18:03, schrieb Brandon McGinty: >>> Good afternoon. >>> We've got a freeswitch machine, no external SIP gateways for outside >>> calls, eight extensions, two conferences, and a completely public IP for >>> the machine in question (no NAT weirdness), running on Debian 6 (weezy/sid). >>> I woke up this morning, to find that sip_external_port 5060 was not >>> listening, though it was enabled in config/vars.xml. >>> The internal port, 5080, is listening, and I have folks confirming that >>> they can speak using that port. >>> I've set netcat to listen via 5080, so I know it isn't firewalled, or >>> not at least ina conventional manner. >>> Any help you all can provide, things I can check, would be greatly >>> appreciated. >>> >>> Sincerely, >>> Brandon McGinty-Carroll >>> >>> >>> _________________________________________________________________________ >>> Professional FreeSWITCH Consulting Services: >>> consulting(a)freeswitch.org >>> http://www.freeswitchsolutions.com >>> >>> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >>> http://www.cudatel.com >>> >>> Official FreeSWITCH Sites >>> http://www.freeswitch.org >>> http://wiki.freeswitch.org >>> http://www.cluecon.com >>> >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting(a)freeswitch.org >> http://www.freeswitchsolutions.com >> >> FreeSWITCH-powered IP PBX: The CudaTel Communication Server >> http://www.cudatel.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://wiki.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > >_________________________________________________________________________ >Professional FreeSWITCH Consulting Services: >consulting(a)freeswitch.org >http://www.freeswitchsolutions.com > >FreeSWITCH-powered IP PBX: The CudaTel Communication Server >http://www.cudatel.com > >Official FreeSWITCH Sites >http://www.freeswitch.org >http://wiki.freeswitch.org >http://www.cluecon.com > >FreeSWITCH-users mailing list >FreeSWITCH-users(a)lists.freeswitch.org >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >http://www.freeswitch.org

1 0

Asterisk, FreeSWITCH, TrixBox, SER, OpenSER, sipX, CallWeaver, and YATE.
by Kaushal Shriyan 03 Jan '12

03 Jan '12

Hi, Please help me understand the following applications and what are its advantages if we compare between each of them. Asterisk, FreeSWITCH, TrixBox, SER, OpenSER, sipX, CallWeaver, and YATE. Regards Kaushal

4 6

FreeSWITCH Community Conference Call Schedule
by Michael Collins 02 Jan '12

02 Jan '12

Hello all! I wanted to send out a heads up with the tentative schedule for the upcoming FreeSWITCH community conference calls. We have some good topics scheduled for the next several weeks and I wanted to make sure everyone has ample opportunity to check their calendars and make sure they are able to join us on the days when their favorite topics are being discussed. Here are the upcoming presentations: Jan 4 - Dave Kompel et. al., discussing CDR parsing and rating Jan 11 - Moises Silva from Sangoma, discussing FreeTDM and how to configure PRI cards; also he will be presenting some new GSM goodies from Sangoma Jan 18 - Muhammed Naseer (IRC: Goni) discusses his FreeSWITCH billing application: vBilling Jan 25 - Marc Olivier Chouinard (IRC: moc) will talk about a new module he is working on: mod_voicemail_ivr Feb 1 - Robert Daniel from George Washington University will share some information on how they are using games to teach FreeSWITCH/telecommunications Feb 8 - OPEN Feb 15 - Darren Schreiber et. al. from the 2600hz project will be sharing with the community some updates on 2600hz, Whistle, and blue.box Feb 22 - OPEN We definitely look forward to all of these great presentations over the next few months. If you have a suggestion for a conference call presentation then please contact me at msc(a)freeswitch.org so we can make arrangements. Thanks to everyone who makes FreeSWITCH such a great community! Michael S Collins

1 0

Finish LUA script
by Juan Antonio Ibañez Santorum 02 Jan '12

02 Jan '12

Hello! Is there any way to finish a LUA script before reaching its end line? Regards

2 2

mod shout win32
by Rodney 02 Jan '12

02 Jan '12

I have build mod_shout on win32 and placed the following files in the c:\program files\freeswitch\mod\ folder mod_shout.dll mod_shout.exp mod_shout.lib mod_shout.pdb and I have put the mpg123 folder at \\Winserver2008\c\Program Files\FreeSWITCH\mpg123-1.13.4-static-x86 but when I go to my extension i get the following errors in console: err mod_shout.c:859 error: mpg123 error at mod_shout.c:659 err mod_shout.c:862 error from mpg123: Invalid mpg123 handle. (code 10) did i not put the mod_shout files in correct folders or is it not knowing where to look for mpg123? ________________________________ From: "freeswitch-users-request(a)lists.freeswitch.org" <freeswitch-users-request(a)lists.freeswitch.org> To: freeswitch-users(a)lists.freeswitch.org Sent: Tuesday, December 27, 2011 6:56 PM Subject: FreeSWITCH-users Digest, Vol 66, Issue 176 ----- Forwarded Message ----- Send FreeSWITCH-users mailing list submissions to freeswitch-users(a)lists.freeswitch.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request(a)lists.freeswitch.org You can reach the person managing the list at freeswitch-users-owner(a)lists.freeswitch.org When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-users digest..." Today's Topics: 1. Re: sangoma A200 with mod_freetdm on windows?! (Jeff Lenk) 2. Re: mod shout win32 (Jeff Lenk) 3. prevention of duplicate calls. (Rodney) 4. Re: sangoma A200 with mod_freetdm on windows?! (Moises Silva) 5. micrsoft voip plug in for fax (Darcy) 6. Re: sangoma A200 with mod_freetdm on windows?! (Tamer Higazi) 7. Re: Building Freeswitch on OSX Lion - ./configure openssl error (James) Thats a pretty open ended question. I can tell you that it is supported and it works well. You will have to build from source and you can use the freely available version of Visual Studio 2010 Express. The projects and solutions to do this are already built and available in Git. If you ask some more specific questions I will try to help. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/sangoma-A200-with-mod-freetdm… Sent from the freeswitch-users mailing list archive at Nabble.com. Have you seen http://wiki.freeswitch.org/wiki/Installation_for_Windows otherwise post some more specific questions on what you are having problems with. The Git supplied VS projects will build mod_shout but are building some of the dependent libraries with an older version than on linux and this may cause you to see differences in behavior or other. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/mod-shout-win32-tp7130183p713… Sent from the freeswitch-users mailing list archive at Nabble.com. is there a method using xml that i can prevent callers three waying themselves. I find some idiots will do this so they can "produce" feedback into a conference room. I would like the system to automatically determine that they are already on the ivr and send them to a recorded message and hangup. or maybe auto hanging up the first call in case of "accidentals" from voips not hanging up and continuing the first call. On Mon, Dec 26, 2011 at 9:00 PM, Tamer Higazi <th982a(a)googlemail.com> wrote: Hi people! >I got my A200 board running with 1 FXS module on Linux along with >mod_freetdm, but I am facing problems getting it to run on Windows. From >Sangoma I followed the instructions to set up the board on Windows7 >winpipe module, which works so far. > >How do I get freeswitch with mod_freetdm to run on Windows that I can >make use of the board (pbx) on a win machine? > > You may want to send an email to Sangoma support. They are working already in a wiki page for Windows setup, in the meantime they can help you with instructions via email. Moises Silva Software Engineer, Development Manager msilva(a)sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube VegaStream is now part of Sangoma! Ask us about both Gateway Appliances and Internal Gateways Has anyone any experience using microsoft’s voip plug in for fax with the freeswitch, I only get about 1 in 10 completion, inbound works 100%, outbound will only work if the server is in the same building. DarcyHi Jeff! Thank you for your support- I saw there are batch files for 2008 and 2010 available. The batch file for 2008 processed with errors at the end. As well, I want to compile the freeswitch on 64 bit windows, and not on 32bit. what he did by default. I modified the patch file with the /p flag to use the "x64" bit profile. However, 53 errors were at the end available. I will post here what I did wrong. Are the procedures of compiling freeswitch on windows the same as on Linux?! I ment, in the modules.conf to comment out the stuff I want to have?! Do I have to be careful when compiling freeswitch along mod_freetdm ?! Tamer Am 27.12.2011 16:34, schrieb Jeff Lenk: > Thats a pretty open ended question. I can tell you that it is supported and > it works well. You will have to build from source and you can use the freely > available version of Visual Studio 2010 Express. The projects and solutions > to do this are already built and available in Git. If you ask some more > specific questions I will try to help. > > -- > View this message in context: http://freeswitch-users.2379917.n2.nabble.com/sangoma-A200-with-mod-freetdm… > Sent from the freeswitch-users mailing list archive at Nabble.com. > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting(a)freeswitch.org > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org Thanks for the response, Seven - the openssl issue has been reported in JIRA already a couple of times. The workarounds there don't seem to work. See: http://jira.freeswitch.org/browse/FS-3642 Your workaround that you mentioned did not appear to work for me either - I actually ended up getting the error that you originally reported in this other JIRA issue: http://jira.freeswitch.org/browse/FS-3243 What do I need to do to fix that error? And by the way, I would say that last JIRA issue should be reopened, as it's happening on my Macbook Air (OSX Lion) too. On Tue, Dec 27, 2011 at 5:08 AM, Seven Du <dujinfang(a)gmail.com> wrote: 1. report on jira.freeswitch.og > > >2. for a workaround, try mv libs/iksemel to /tmp before configure and move back before make if you don't need dingaling support. > > >-- >About: http://about.me/dujinfang >Blog: http://www.dujinfang.com >Proj: http://www.freeswitch.org.cn > >Sent with Sparrow > > > >On Tuesday, December 27, 2011 at 1:37 PM, James wrote: >I'm using the latest git commit (01267cd6f5b9a243c42c571f5d161849a66b3c82) and running into an error configuring Freeswitch on OSX Lion: >> >> >>./configure: line 12283: syntax error near unexpected token `openssl,' >>./configure: line 12283: ` PKG_CHECK_MODULES(openssl, openssl,' >>configure: error: ./configure.gnu failed for libs/iksemel >> >> >>./bootstrap.sh runs fine; ./configure eventually spits out the error above. Any tips for me? I am mainly trying to set it up for local development purposes, not production. >> >> >>Thanks. >>_________________________________________________________________________ >>Professional FreeSWITCH Consulting Services: >>consulting(a)freeswitch.org >>http://www.freeswitchsolutions.com >> >> >>FreeSWITCH-powered IP PBX: The CudaTel Communication Server >>http://www.cudatel.com >> >> >>Official FreeSWITCH Sites >>http://www.freeswitch.org >>http://wiki.freeswitch.org >>http://www.cluecon.com >> >> >>FreeSWITCH-users mailing list >>FreeSWITCH-users(a)lists.freeswitch.org >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>http://www.freeswitch.org > > >_________________________________________________________________________ >Professional FreeSWITCH Consulting Services: >consulting(a)freeswitch.org >http://www.freeswitchsolutions.com > >FreeSWITCH-powered IP PBX: The CudaTel Communication Server >http://www.cudatel.com > >Official FreeSWITCH Sites >http://www.freeswitch.org >http://wiki.freeswitch.org >http://www.cluecon.com > >FreeSWITCH-users mailing list >FreeSWITCH-users(a)lists.freeswitch.org >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >http://www.freeswitch.org > > _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

2 1

Help with Javascript "minuteminder.js"
by BBLister 02 Jan '12

02 Jan '12

Hi and happy new year, I am trying to implement a simple minute minder javascript, that will play a beep every minute in telephone call. I am using execute_on_answer and I have specified before the bridge the following: <action application="export" data="nolocal:execute_on_answer=javascript minuteminder.js"/> In the file minuteminder.js I have this code: --------------------------------------------------------------------------------------- function beep(nr_or_tries,sv_uuid) { console_log("Action: Broadcasting beep on " + sv_uuid + "\n" ); if (session.ready()) apiExecute("uuid_broadast" , sv_uuid + " b5/beep.wav"); } var nr_or_tries = 10; curDate = Date(); console_log("Action: Entering loop at "+curDate); var sv_uuid = session.uuid; console_log("Action: Activating minute minder on session "+sv_uuid+"\n"); session.answer(); while (session.ready()) { console_log("Action: Entering while loop\n"); while (nr_or_tries > 0 ) { console_log("Action: Loop id" + nr_or_tries + "\n"); beep(nr_or_tries--,sv_uuid); session.sleep(60000); } } console_log("Action: Finished\n"); exit(); --------------------------------------------------------------------------------------- I have put the console_log for debuging. When I make a call I see in my logfile the message from console_log ("Action: Broadcasting beep....") and the session number and after this the error that Session is Not active: 2011-12-31 23:54:26.616866 [DEBUG] minuteminder.js:1 Action: Broadcasting beep on d78cf701-fa33-e111-ab5a-00241d71e483 2011-12-31 23:54:26.616866 [ERR] inline:1 Session is not active! The Beep is not heard. I have tried many combinations to fix this but I always get "Session is not active". What can I do in order to fix this? Do I need session.answer() or session.read() or do I assume that the session is ready because this script was called on "exeute_on_answer"? Thank you very much in advance.

2 1