February 2011 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] 503 Maximum Calls In Progress
by Gary Chen 11 Feb '11

11 Feb '11

Yes. I did some test calls between two Cisco sip phones and they all work fine and then it just stop working. At that point, FS is still up and I can see the system information by press F keys. It just won’t accept any calls. I looked at log file and it just has that one line: 2011-02-11 17:39:58.691008 [CRIT] switch_core_session.c:1629 The system cannot create any sessions at this time. The register message is still working at that time. Gary From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Steven Ayre Sent: Friday, February 11, 2011 12:13 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] 503 Maximum Calls In Progress Uhhh... which is the opposite of commenting it out? Gary, if you don't have that param in your file then it's not this. You say FS had been up an hour. Had it handled any successful calls in that time? Was FS shutting down at the time? -Steve 2011/2/11 David Ponzone <david.ponzone(a)ipeva.fr> So add it. David Ponzone Direction Technique email: david.ponzone(a)ipeva.fr tel: 01 74 03 18 97 gsm: 06 66 98 76 34 Service Client IPeva tel: 0811 46 26 26 www.ipeva.fr - www.ipeva-studio.com Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur. Le 11/02/2011 à 17:01, Gary Chen a écrit : My switch.conf.xml does not have this param. Gary From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Friday, February 11, 2011 10:39 AM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] 503 Maximum Calls In Progress Comment from anthm; edit conf/autoload_configs/switch.conf.xml comment out <param name="min-idle-cpu" value="25"/> It seems to not work well on 32 bit. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

2 1

Re: [Freeswitch-users] 503 Maximum Calls In Progress
by Gary Chen 11 Feb '11

11 Feb '11

My switch.conf.xml does not have this param. Gary From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Friday, February 11, 2011 10:39 AM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] 503 Maximum Calls In Progress Comment from anthm; edit conf/autoload_configs/switch.conf.xml comment out <param name="min-idle-cpu" value="25"/> It seems to not work well on 32 bit.

3 3

Vestec Speech Engine: Large Vocabulary
by Kashif Kahn 11 Feb '11

11 Feb '11

Hello Everyone, Vestec recently launched a large vocabulary speech engine for "command-and-control" type IVR applications. The new engine - called Tier-2 - supports a vocabulary size of 2,500 keywords per recognition and complements our existing Tier-1 engine that has a 500 keywords vocabulary size. Tier-2 retails for $199 per port (ie. channel) while Tier-1 is priced at $99 per port. Acoustic models needs to be licensed separately at $9.99 per language. Our ASR is designed for keywords-based interaction and offers the best deal around for speech enabling a wide variety of IVR applications, including DTMF menus and multi-step business processes. The speech engine is standards based in terms of grammar writing format and platform integration protocols. We support SRGS grammar (ABNF & XML) as well as MRCP integration (v1 & v2). In addition, we offer a highly scalable architecture that is capable of supporting thousands of ports in an efficient manner. A starter kit - comprising a specially priced perpetual license for a full-function, full-feature standard ASR engine - is available for $25. Please visit Vestec webstore at: http://www.vestec.com/products Regards, -Kashif -- Kashif Kahn VP Business Development Vestec Inc Waterloo, ON Canada phone: +1 519 885-7615

2 1

no voice for call in same lan network
by Sam 11 Feb '11

11 Feb '11

Here , i have bunch extension in the same lan network and when they talk with each other there is no voice , i have another bunch in other lan network the too do not get voice when talking with each other. Here the public ip for 2 bunches are different and when an extension from bunch A calls to extension of bunch B then they have voice. FS is on public IP :( >From the trace i could see that when making an internal call in the same LAN the RTP flows to private IP and when making and external call from bunch A to bunch B the RTP is send to public IP where the voice is heard, also while making and outbound call the RTP is send to public IP of the LAN and there is voice. Is this a known scenario to anybody ? Regards Sam

2 1

Re: [Freeswitch-users] 503 Maximum Calls In Progress
by Gary Chen 11 Feb '11

11 Feb '11

My company blocked Git access. Can you tell me which config file need to be changed to fix the problem? Gary From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Peter Olsson Sent: Friday, February 11, 2011 10:12 AM To: 'FreeSWITCH Users Help' Subject: Re: [Freeswitch-users] 503 Maximum Calls In Progress Update to latest git. I think Tony did an update for this, it was in one of the config files. /Peter Från: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Gary Chen Skickat: den 11 februari 2011 15:52 Till: freeswitch-users(a)lists.freeswitch.org Ämne: [Freeswitch-users] 503 Maximum Calls In Progress FreeSWITCH Version 1.0.7 (hacked-20110119T213949Z) I have a freeswitch installed for testing. It just up for about an hour and there are two Cisco 7960 phones registered. After made several test calls between these two Cisco phones, FS stop working and give me these message on fs_cli: 2011-02-11 17:39:58.691008 [CRIT] switch_core_session.c:1629 The system cannot create any sessions at this time. In the SIP header it shows: 503 Maximum Calls In Progress What should I do to fix this? Here is the message by press F2, F3 and F4: F2: freeswitch@internal> status UP 0 years, 0 days, 1 hour, 12 minutes, 55 seconds, 590 milliseconds, 20 microseconds 39 session(s) since startup 0 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 F3: freeswitch@internal> show channels 0 total. F4: freeswitch@internal> show calls 0 total. Gary !DSPAM:4d554ec432767061315535!

2 1

503 Maximum Calls In Progress
by Gary Chen 11 Feb '11

11 Feb '11

FreeSWITCH Version 1.0.7 (hacked-20110119T213949Z) I have a freeswitch installed for testing. It just up for about an hour and there are two Cisco 7960 phones registered. After made several test calls between these two Cisco phones, FS stop working and give me these message on fs_cli: 2011-02-11 17:39:58.691008 [CRIT] switch_core_session.c:1629 The system cannot create any sessions at this time. In the SIP header it shows: 503 Maximum Calls In Progress What should I do to fix this? Here is the message by press F2, F3 and F4: F2: freeswitch@internal> status UP 0 years, 0 days, 1 hour, 12 minutes, 55 seconds, 590 milliseconds, 20 microseconds 39 session(s) since startup 0 session(s) 0/30 1000 session(s) max min idle cpu 0.00/100.00 F3: freeswitch@internal> show channels 0 total. F4: freeswitch@internal> show calls 0 total. Gary

2 1

Can XML CDR Timestamps Be UTC?
by Jerry Richards 11 Feb '11

11 Feb '11

Hello All, Is there a way to configure Freeswitch to indicate UTC (instead of local time) in the XML CDR files? Thanks, Jerry

2 1

double instance at relaodxml
by Madovsky 11 Feb '11

11 Feb '11

sometimes when I run from fs_cli "reloadxml" I notice 2 instances of FS so the last instance log mod_event socket error , could not listen to socket.... thanks

2 1

Yet another DTMF question
by Travis Stutsman 11 Feb '11

11 Feb '11

I've looked through a lot of threads regarding DTMF troubles, but none of them seem to relate to me. I've just pulled a fresh copy of the freeswitch source and compiled it and I cannot get my digits recognized - neither in-band nor out-of-band. I haven't messed with INFO yet as my phones don't support it. I've done packet captures on my local interface and on the server's interface and I can see the RTP rfc2833 digits showing up, but freeswitch completely ignores them. I feel like I must be overlooking something horribly obvious. How can this be? Any hints guys? Thanks in advance!

3 11

expr()
by Madovsky 11 Feb '11

11 Feb '11

Is the greater lower sign available in expre() api ? I tried <condition field="${cond(expr(${myvar} > 0.01) ? YES : NO)}" expression="^YES$"> but retuns always yes.... thanks

1 1