August 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Freeswitch: issue in making simultaneous call
by Chaitanya Bhatt // Viva 19 Aug '10

19 Aug '10

Hey I am facing problem in making few outbound calls simultaneously. I am executing "api originate" command from perl over ESL. After calling originate ,same perl file listens for CHANNEL_ORIGINATE CHANNEL_ANSWER CHANNEL_HANGUP_COMPLETE events. When perl file receives CHANNEL_HANGUP_COMPLETE event, it get terminates. I have done this code of originate & hangup listen event in perl cgi. When i do 10-20 request (10-20 simultaneous call), at freeswitch only 2-3 calls get serviced. To find out issue when i commented the code of event listen in cgi, i was able to make all 10-20 calls simulateneously. I have already checked apache configuration & is working well. Now i want to know whether freeswitch has limitation on number of clients listening to its events or there is some other issue of ESL. Please guide me what could be the issue. Incase of any further queries, Please feel free to mail me or contact me on the numbers provided below. Thanks & Regards, Chaitanya Bhatt Software Engineer. Viva Infomedia Pvt. Ltd. 242, Oshiwara Industrial Centre, New Link Road, Opp. Oshiwara Bus Depot, Goregaon West, Mumbai 400104. Direct: +91.22.40310356 Board: +91.22.40310310 Email : chaitanya(a)vivainfomedia.com Viva Infomedia: Awarded as Best SME (E-Commerce) at CNBC Emerging India Awards 2009

3 3

Re: [Freeswitch-users] FS processing 302
by Kristian Kielhofner 18 Aug '10

18 Aug '10

It's supposed to be but I've seen implementations use it when attempting to indicate a specific address to signal to. Freeswitch did "the right thing" and used the address from maddr in my tests so it should work for you. -- Kristian Kielhofner http://blog.krisk.org ----- Original Message ----- From: freeswitch-users-bounces(a)lists.freeswitch.org <freeswitch-users-bounces(a)lists.freeswitch.org> To: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> Sent: Tue Aug 10 12:22:25 2010 Subject: Re: [Freeswitch-users] FS processing 302 Not sure... isn't that multicast? On Aug 10, 2010, at 11:05 AM, Chris Veazey wrote: > Freeswitch via the external profile(port 5080) is sending an Invite and > receiving a 302 response. > > Should Freeswitch by default be able to process the maddr of a 302 > redirect? _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

6 16

How many calls we can park in a freeswitch
by Abubacker siddiq 18 Aug '10

18 Aug '10

Dear All, I just want to know how many call we can park in a freeswitch at the maximum ?, -- *Best Regards, **Abubacker systems engineer bk systems (p) ltd** *

5 4

Re: [Freeswitch-users] Howler - Gone?
by Kristian Kielhofner 18 Aug '10

18 Aug '10

The only reason I ask is because I just bought a 480 for testing ;)... -- Kristian Kielhofner http://blog.krisk.org ------------------------------ *From*: freeswitch-users-bounces(a)lists.freeswitch.org < freeswitch-users-bounces(a)lists.freeswitch.org> *To*: FreeSWITCH Users Help <freeswitch-users(a)lists.freeswitch.org> *Sent*: Sun Jul 25 13:35:04 2010 *Subject*: Re: [Freeswitch-users] Howler - Gone? On Wed, Jul 21, 2010 at 3:25 PM, Kristian Kielhofner <kris(a)kriskinc.com>wrote: > On Wed, Jul 21, 2010 at 3:08 PM, Moises Silva <moises.silva(a)gmail.com> > wrote: > > Awesome. What about existing cards (firmware upgrade)? What about > the FreeSWITCH codec module you wrote? > > I'll update the FreeSWITCH module as soon as we're ready for the releasing including G723.1 For existing customers, on a case by case basis we can update their firmware. Unfortunately we do not have generally available tools for firmware update yet as we do with our AFT hardware. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R 9R6 Canada t. 1 905 474 1990 x128 | e. moy(a)sangoma.com

3 3

FreeSWITCH Conference Call Starting Shortly!
by Michael Collins 18 Aug '10

18 Aug '10

C'mon down! http://wiki.freeswitch.org/wiki/FS_weekly_2010_08_18 Brian K West will be by to talk about NAT and VoIP with FreeSWITCH. -MC

2 1

database corruption errors
by Brian May 18 Aug '10

18 Aug '10

When starting freeswitch I get a long list of errors, starting from: 2010-08-04 21:24:01.608710 [INFO] switch_core_sqldb.c:1275 Opening DB 2010-08-04 21:24:01.611895 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] drop table channels 2010-08-04 21:24:01.615011 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] drop table calls 2010-08-04 21:24:01.617641 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] drop table interfaces 2010-08-04 21:24:01.620330 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] drop table tasks 2010-08-04 21:24:01.623370 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] PRAGMA synchronous=OFF; 2010-08-04 21:24:01.626318 [ERR] switch_core_sqldb.c:404 SQL ERR [database disk image is malformed] PRAGMA cache_size=8000 2010-08-04 21:24:01.628830 [DEBUG] switch_core_sqldb.c:765 SQL ERR [database disk image is malformed] [select hostname from complete] Auto Generating Table! 2010-08-04 21:24:01.632166 [DEBUG] switch_core_sqldb.c:772 SQL ERR [database disk image is malformed] [CREATE TABLE complete ( sticky INTEGER, a1 VARCHAR(128), a2 VARCHAR(128), a3 VARCHAR(128), a4 VARCHAR(128), a5 VARCHAR(128), a6 VARCHAR(128), a7 VARCHAR(128), a8 VARCHAR(128), a9 VARCHAR(128), a10 VARCHAR(128), hostname VARCHAR(256) ); ] 2010-08-04 21:24:01.643766 [DEBUG] switch_core_sqldb.c:778 SQL ERR [database disk image is malformed] [CREATE TABLE complete ( sticky INTEGER, a1 VARCHAR(128), a2 VARCHAR(128), a3 VARCHAR(128), a4 VARCHAR(128), a5 VARCHAR(128), a6 VARCHAR(128), a7 VARCHAR(128), a8 VARCHAR(128), a9 VARCHAR(128), a10 VARCHAR(128), hostname VARCHAR(256) ); ] 2010-08-04 21:24:01.653300 [DEBUG] switch_core_sqldb.c:765 SQL ERR [database disk image is malformed] [select hostname from aliases] Auto Generating Table! [...] Which leads to two concerns: 1. Why is it trying to drop everything when the database is corrupt? (note: this is an older version now) 2. Which database is corrupt? Is there any command line tool I can use to verify it is corrupt? Or repair it even? Also not sure how it got to be corrupt in the first place. Might be something to do with a power failure. Freeswitch seemed OK, but I guess I should have checked the logs files at the time, the errors started about the same time. An automatic way of testing these files would be good, so I can ensure I am alerted if something goes wrong again. What is the best way to recover? -- Brian May <brian(a)microcomaustralia.com.au>

3 10

NAT ACL and security
by Victor Chukalovskiy 18 Aug '10

18 Aug '10

3 3

Is mod_java supported on windows?
by xuyan yang 18 Aug '10

18 Aug '10

In the latest git I didn't find any VC project file for mod_java. From the makefile I found that swig is needed to conpile this. And swig does have windows version. Is it possible to compile mod_java for windows from latest git tree?

2 2

enable passthrough of "Privacy: id" header in sip
by mike.burlingame 18 Aug '10

18 Aug '10

Seem to be having an issue with RPID Privacy flag A-LEG Remote-Party-ID: <sip:NUMBER@DOMAIN>;party=calling;screen=yes;privacy=uri B-LEG Remote-Party-ID: "NAME" <sip:NUMBER@IPADDRESS>;party=calling;screen=yes;privacy=off I found a post at http://jira.freeswitchorg/browse/MODENDP-133 however it states it should be resolved any suggestions FreeSWITCH Version 1.0.head (svn-18032) Thanks

6 14

PlayAndGetDigits reset input
by Nigel Kent 17 Aug '10

17 Aug '10

Using PlayAndGetDigits I want to give option to the user to reset their input by entering a certain key sequence (##) How can I make PlayAndGetDigits reprocess immediatly if this key squenqence is pressed.

8 23