April 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Mod_limit questions
by ivdreg ivdreg 29 Oct '12

29 Oct '12

Hi All, I have some questions regarding mod_limit. 1. I'm using 16674 in production but tested and with 17001. I try mod_limit with odbc/mysql and sqlite and have same problem: mod_limit using limit_hash never tries to write data to SQL. It works (counts sessions) on log screen but no data in MySQL/Sqlite. It seems that data is cached but cache never flushed to DB. Is anyone has this problem. My limits are: <action application="limit_hash" data="op_${sip_h_X-SRC-Cust} ${destination_number} 5 !INCOMING_CALL_BARRED" /> <action application="limit_hash" data="in_${sip_h_X-SRC-Cust} ${caller_id_number} 10/300 !OUTGOING_CALL_BARRED" /> and they are applied on inbound call profile in same extension. 2. I need to implement rule maximum of 50 calls per day/24h from the same CLID (A NUMBER) after that calls to be limited. I'm not sure but rule in example "Limit calls to 5 calls every 10 minutes" is about concurrent call but not calls processed as count. Any idea ? Thanks for any help

3 8

xmpp
by Peter P GMX 19 Oct '12

19 Oct '12

I saw that xmpp is supported in Fresswitch. See wiki: http://wiki.freeswitch.org/wiki/Mod_xmpp_event Has anybody already set this up? I have found no mod_xmpp neither in my mod directory nor in the source? There was also a question: " Q: Is it possible to send commands to fs via xmpp? Answer: Yes. " Anybody knows what can be done here and how to do this? Best regards Peter

4 3

mod_dingaling picking wrong IP address / no audio?
by Mark Campbell-Smith 14 Sep '12

14 Sep '12

Hi! I am trying to call from my corporate network (firewalled) using Gtalk to Freeswitch. I am not getting any audio. In the logs I see that mod_dingaling is using my internal corporate IP address which is not publically addressable. 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2932 1 candidates 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2960 candidates 146.xx.xx.xx:50320 2009-06-23 22:46:52.140382 [DEBUG] mod_dingaling.c:2993 Acceptable Candidate 146.xx.xx.xx:50320 Further on in the log, I can see GTalk sending a new candidate IP address to use: 2009-06-23 22:46:52.940486 [DEBUG] libdingaling.c:503 New Candidate 1 name=rtp type=local protocol=udp username=e+JTkVHT1xEkqXGD password=fAxU6Pr1oF9Zq48U address=192.168.1.102 port=50322 pref=1.00 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.940486 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:52.957753 [DEBUG] libdingaling.c:503 New Candidate 2 name=rtp type=stun protocol=udp username=RBqyF2XNMYLfJNoU password=DQMjon1fSVoJIRTp address=124.xxx.xxx.xxx port=50323 pref=0.90 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:52.957753 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] and 2009-06-23 22:46:53.788341 [DEBUG] libdingaling.c:503 New Candidate 3 name=rtp type=relay protocol=udp username=62L5zs2FHbcUdeCJ password=KxmNgkUmZsLfuX6S address=209.xx.xxx.xxx port=19295 pref=0.50 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2634 using Existing session for 4085152502 2009-06-23 22:46:53.788341 [DEBUG] mod_dingaling.c:2928 Already picked an IP [146.xx.xx.xx] Because of this, I never get audio. Any ideas how to fix this? Thanks!

5 5

ESL problem
by Thangappan.M 31 Jul '12

31 Jul '12

Dear all, In the previous post, I got the information that using event outbound socket we can implement the IVR and also see the example in libs/esl/perl/server2.pl. I have seen it and understood the flow of the script.But when I was running that script it tells the following error. Can't locate loadable object for module ESL in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at ESL.pm line 11 Compilation failed in require at server2.pl line 1. Then I checked the 11th line in the ESL.pm that line is (bootstrap ESL;) But in perl directory there is no directory called ESL. What would be the issue?. Is ESL necessary is necessary for implementing IVR using event outbound socket? -- Regards, Thangappan.M

5 5

How to break a playback with loops
by Daniel Liang 24 Jun '12

24 Jun '12

Hi, I am trying to playing back a wav file a few times, and on receiving a dtmf event, it stops playing the file. The command I sent is: sendmsg call-command: execute execute-app-name: playback execute-app-arg: <the wav file> loops: 4 On receiving a dtmf event, I send a break command: sendmsg call-command: execute execute-app-name: break However, that only breaks one loop of the playback. And I have to press a dtmf for 4 times to stop the file. I tried sending 4 break commands all at once. But it didn't work. And even worse, my program stops receiving dtmfs anymore. My guess is that the first break stops the first loop, but before the second loop starts, the following 3 breaks stop something else that I don't know what they are. Any help is appreciated. Thanks. Daniel Liang

6 6

Facebook...
by Klaus Hochlehnert 27 May '12

27 May '12

Hi Guys, just saw that you already have a Facebook entry. Wouldn't it be possible to connect the news/twitter feeds somehow with Facebook? I'd really like to see all news on Facebook... Cheers, Klaus

6 6

FreeSWITCH cluster with IM/Presence
by Even André Fiskvik 22 Dec '11

22 Dec '11

Hi. I currently have a project where I'm researching how to establish a clustered and scalable platform with: - registration - presence/blf between eyebeam/bria and Linksys SPA962 clients - IM between eyebeam/bria clients. - calling between the clients The first scenario I want to test is with two FreeSWITCH servers and shared ODBC db running in a "cluster". How the registrations and calls etc. are balanced between them is not decided yet, but I'm thinking that a UltraMonkey setup or DNS SRV records could to the trick here? The main challenge in this setup is sharing presence, and doing call-setup and IM between two FreeSWITCH servers (which can be scaled by adding n-nodes). I'm interested in user's that can confirm wether this solution is possible or not with FreeSWITCH and it's current state, and what it would take to make something like this work. If there's any part of FS that is lacking some implementation to make such a scenario work, we are interested in providing the funding to support those features. I've seen that the core db has added support for ODBC, but I'm not sure wether this is something that would be helpful in this scenario or not. This is only conceptual right now, so I'm interested in paying someone that could help me configure the two FS servers to support this scenario on an hourly basis to get a quick proof-of-concept up and running. The proof-of-concept has to be completed by March 19th, after which we will evaluate what technologies and setup we want to commit to. Some other variations I'm concidering is Opensips/Kamailio -> Asterisk, Opensips/Kamailio -> FreeSWITCH, Opensips/Kamailio -> Asterisk and Openfire + Asterisk-im plugin for IM/presence. I'm also open to other suggestions, but I'd like this topic to stay on how FreeSWITCH could facilitate such a platform. Best regards, Even André Fiskvik CTO - Oyatel AS

2 1

Grandstream GXP 2000
by Jonas Gauffin 18 Dec '11

18 Dec '11

Hello I have problems with TCP and GXP2000 phones. They work fine using UDP, but no calls arrive if I switch to TCP. I've upgraded to the latest GS firmware today to see it that helped, but it didn't. Have anyone else had problems with TCP? Regards, Jonas

5 8

Hardware phones that do 48Khz Celt: Was Re: Is there any license G729?
by Craig Askings 29 Sep '11

29 Sep '11

Are there any hardware phones that support 48 Khz Celt and automated/mass deployment? Craig. 2009/6/30 Jason White <jason(a)jasonjgw.net>: > Brian West <brian(a)freeswitch.org> wrote: >> Everyone has this need for lower bandwidth calls... I tend to march the >> other way. 48kHz baby! (btw you can do 48kHz in the same bandwidth as a >> single ulaw call) > > 48khz Celt (celt@48000 in your codec preferences) sounds wonderful with > FreeSWITCH. To test, run two FreeSWITCH instances, both with mod_portaudio. > This also works well in 48khz conferences. > > I wouldn't use G.729 even if it weren't encumbered by patents - it's G.711, > G.722, G.722.1 and (my current favourite) Celt all the way. > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > -- Craig Askings Network Engineer | Over the Wire Pty Ltd craig(a)overthewire.com.au | www.overthewire.com.au Phone: 07 3847 9292 | Fax: 07 3847 9696 | Mobile: 0404 019 365

12 24

Re: [Freeswitch-users] Radius/Authentication/Authorization
by Abid Saleem 06 Aug '11

06 Aug '11

Dear Tihomir, Any update and help on the below please. Abid From: abid_freeswitch(a)live.com To: tculjaga(a)gmail.com CC: neal(a)wanlink.com Subject: Re: [Freeswitch-users] Radius/Authentication/Authorization Date: Wed, 31 Mar 2010 19:35:32 +0500 Dear Tihomir, Thank you very much for the configuration example but in which files to place these configurations. Please bear with me because I am new to FreeSwitch and if you could provide complete steps. Also when I compile FS and load the module mod_rad_auth in conf/autoload_configs/modules.conf.xml, I get an error while starting FS as follows. 2010-03-31 19:32:29.399466 [CRIT] switch_loadable_module.c:882 Error Loading module /usr/local/freeswitch/mod/mod_rad_auth.so**/usr/local/freeswitch/mod/mod_rad_auth.so: undefined symbol: rc_conf_str** Please advise. Thanks. Regards-----------Abid Saleem --Forwarded Message Attachment-- From: tculjaga(a)gmail.com CC: neal(a)wanlink.com To: freeswitch-users(a)lists.freeswitch.org Date: Tue, 30 Mar 2010 21:42:03 +0200 Subject: Re: [Freeswitch-users] Radius/Authentication/Authorization hello, here is an example <configuration name="rad_auth.conf" description="radius authentification module"> <settings>   </settings> <client> <param name="authserver" value="10.1.1.10:1812:gateway"/> <param name="dictionary" value="/usr/local/etc/radiusclient/dictionary.all"/> <param name="seqfile" value="/var/run/radius.seq"/> <param name="mapfile" value="/usr/local/etc/radiusclient/port-id-map"/> <param name="default_realm" value=""/> <param name="radius_timeout" value="3"/> <param name="radius_retries" value="2"/> <param name="radius_deadtime" value="0"/> <param name="bindaddr" value="*"/> </client> <vsas>   <param name="h323-conf-id" id="24" value="CALLID" pec="9" expr="1" direction="in"/> <param name="h323-prompt-id" id="104" value="SERVICENUM" pec="9" expr="1" direction="in"/> <param name="Cisco-AVPair" id="1" value="TRANSACTIONID" pec="9" expr="1" direction="in"/> <param name="Calling-Station-Id" id="31" value="CALLINGNUMBER" pec="0" expr="1" direction="in"/> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0" direction="in"/> <param name="NAS-Port-Id" id="87" value="ISDN 3/0:D:14" pec="0" expr="0" direction="in"/> <param name="Login-User" id="1" value="1" pec="0" expr="0" direction="in"/>  <param name="BILING_MODEL" id="109" value="billing_model" pec="9" expr="0" direction="out"/> <param name="CREDIT_AMOUNT" id="101" value="credit_amount" pec="9" expr="0" direction="out"/> <param name="CURRENCY" id="110" value="currency" pec="9" expr="0" direction="out"/> <param name="PREFFERED_LANG" id="107" value="preffered_lang" pec="9" expr="0" direction="out"/> <param name="CREDIT_TIME" id="102" value="credit_time" pec="9" expr="0" direction="out"/> <param name="H323-IVR-IN:DIRATION" id="1" value="h323_ivr_duration" pec="9" expr="0" direction="out"/> <param name="RADIUS_RETURN_CODE" id="103" value="return_code" pec="9" expr="0" direction="out"/>  </vsas> </configuration> in the dialplan you need to trigger auth as: <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> there are two behaviours: 1. authorize the call according to username&pass and dialed number - if authorized, the radius server returns credit time towards the dialed number 2. authorize the call according to username&pass - if authorized, the radius server returns the current account balance <extension name="unitest_rad-ANI-auth"> <condition field="destination_number" expression="^601$"> <action application="log" data="INFO PRIJE RAD_AUTH "/> <action inline="true" application="set" data="CALLID=h323-conf-id=${uuid}"/> <action inline="true" application="set" data="SERVICENUM=h323-prompt-id=${destination_number}"/> <action inline="true" application="set" data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/>  <action inline="true" application="set" data="CALLINGNUMBER=38516060333"/> <action inline="true" application="set" data="USERNAME=38516060333"/>  <action inline="true" application="set" data="PASSWD=003282"/>  <action application="sleep" data="2000"/> <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> <action application="log" data="INFO AUTH_RESULT=${AUTH_RESULT}"/> <action application="log" data="INFO billing_model=${billing_model}"/> <action application="log" data="INFO credit_amount=${credit_amount}"/> <action application="log" data="INFO currency=${currency}"/> <action application="log" data="INFO preffered_lang=${preffered_lang}"/> <action application="log" data="INFO credit_time=${credit_time}"/> <action application="log" data="INFO h323_ivr_duration=${h323_ivr_duration}"/> <action application="log" data="INFO return_code=${return_code}"/>  </condition> </extension> <extension name="unitest_rad-ANI-balance"> <condition field="destination_number" expression="^602$"> <action application="log" data="INFO PRIJE RAD_AUTH "/> <action inline="true" application="set" data="CALLID=h323-conf-id=${uuid}"/> <action inline="true" application="set" data="SERVICENUM=h323-prompt-id=${destination_number}"/> <action inline="true" application="set" data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/>  <action inline="true" application="set" data="CALLINGNUMBER=38516060333"/> <action inline="true" application="set" data="USERNAME=38516060333"/>  <action inline="true" application="set" data="PASSWD=003282"/> <action inline="true" application="set" data="DIALED_NUMBER=16094191500"/> <action application="sleep" data="2000"/> <action application="auth_function" data="in ${DIALED_NUMBER}, in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/> <action application="log" data="INFO AUTH_RESULT=${AUTH_RESULT}"/> <action application="log" data="INFO billing_model=${billing_model}"/> <action application="log" data="INFO credit_amount=${credit_amount}"/> <action application="log" data="INFO currency=${currency}"/> <action application="log" data="INFO preffered_lang=${preffered_lang}"/> <action application="log" data="INFO credit_time=${credit_time}"/> <action application="log" data="INFO h323_ivr_duration=${h323_ivr_duration}"/> <action application="log" data="INFO return_code=${return_code}"/>  </condition> </extension> will update the wiki by the end of the week. you have enough information for now. Tihomir. On Tue, Mar 30, 2010 at 1:52 PM, Abid Saleem <abid_freeswitch(a)live.com> wrote: Hi Neal and other Contributors to FS, I recieved an answer on the list that mod_rad_auth is ready. I upgraded FS to download and install it by "make current" and it is successfully built and installed. Could you please outline the detailed steps to do all this configuration. If it is still not ready, is there any other method that somebody has already implemented like perl scripts etc. Any help in this regard is badly required. THanks for your cooperation. Regards----------Abid SaleemSr. Product Manager Hotmail: Powerful Free email with security by Microsoft. Get it now. _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969

4 8